Date: Wed, 29 Jun 2016 12:23:00 -0700 From: Adrian Chadd <adrian.chadd@gmail.com> To: Sydney Meyer <meyer.sydney@googlemail.com> Cc: "freebsd-wireless@freebsd.org" <freebsd-wireless@freebsd.org> Subject: Re: ath (AR9280) with nanoBSD Message-ID: <CAJ-VmokU6MDQsgb_c%2B0-WyF1Ji4fvGyiQ82uA6Kb5eHcH7NoQg@mail.gmail.com> In-Reply-To: <79A8B7E7-EB56-444D-A4FE-993A29E6ADDA@googlemail.com> References: <C5CC5FDC-F345-4B2E-A382-0BC7BEAC776F@googlemail.com> <CAJ-Vmom%2ByEKdV5WAUe_3Ww1kPvT1g8bEfv6CXXVeFdNnqfp8aQ@mail.gmail.com> <79A8B7E7-EB56-444D-A4FE-993A29E6ADDA@googlemail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
hi, you're very welcome! -a On 29 June 2016 at 12:04, Sydney Meyer via freebsd-wireless <freebsd-wireless@freebsd.org> wrote: > Hi Adrian, > > awesome, it's working fine now.. Thanks a bunch for this hint, i have bee= n rebuilding world and kernel a lot last few days and haven't been able to = figure it out, eventually ripping all options out and building a stock imag= e, which "seemingly" dind't work either, so thanks again. > > Also, thank you very, very much for your ongoing work on all the FreeBSD = Wireless Drivers you are working on. > > Cheers.. > > Sydney >> On Jun 29, 2016, at 20:51, Adrian Chadd <adrian.chadd@gmail.com> wrote: >> >> Hi, >> >> It's there, it just doesn't show up in ifconfig anymore. >> >> sysctl net.wlan.devices >> >> if you create the interface (ifconfig wlan0 create wlandev ath0) then >> it'll show up! >> >> >> -adiran >> >> >> On 29 June 2016 at 11:45, Sydney Meyer via freebsd-wireless >> <freebsd-wireless@freebsd.org> wrote: >>> Hello, >>> >>> i seem to be unable to get the ath driver working on a PC Engines APU 2= C2 Board with a Compex WLE200NX (AR9280) MiniPCIe-Card booting from a NanoB= SD Image built from HEAD. >>> >>> I have built the NanoBSD Image without any BUILD, INSTALL or WORLD opti= ons and with a GENERIC-NODEBUG Kernel. >>> >>> I can see the Card in dmesg with >>> >>> root@:~ # dmesg | grep ath >>> ath0: <Atheros 9280> mem 0xfe800000-0xfe80ffff at device 0.0 on pci4 >>> [ath] enabling AN_TOP2_FIXUP >>> ath0: [HT] enabling HT modes >>> ath0: [HT] 1 stream STBC receive enabled >>> ath0: [HT] 1 stream STBC transmit enabled >>> ath0: [HT] 2 RX streams; 2 TX streams >>> ath0: AR9280 mac 128.2 RF5133 phy 13.0 >>> ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0 >>> >>> and pciconf -lv shows >>> >>> ath0@pci0:4:0:0: class=3D0x028000 card=3D0x3099168c chip=3D0x002= a168c rev=3D0x01 hdr=3D0x00 >>> vendor =3D 'Qualcomm Atheros' >>> device =3D 'AR928X Wireless Network Adapter (PCI-Express)' >>> class =3D network >>> >>> and >>> >>> root@:~ # kldstat -v | grep ath >>> 89 pci/ath_pci >>> >>> but the Card doesn't show up with ifconfig. >>> >>> When booting from USB with FreeBSD-11.0-ALPHA5-amd64-20160624-r302164-m= emstick.img the Card is getting recognised regularly with ifconfig as ath0. >>> _______________________________________________ >>> freebsd-wireless@freebsd.org mailing list >>> https://lists.freebsd.org/mailman/listinfo/freebsd-wireless >>> To unsubscribe, send any mail to "freebsd-wireless-unsubscribe@freebsd.= org" > > _______________________________________________ > freebsd-wireless@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-wireless > To unsubscribe, send any mail to "freebsd-wireless-unsubscribe@freebsd.or= g"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-VmokU6MDQsgb_c%2B0-WyF1Ji4fvGyiQ82uA6Kb5eHcH7NoQg>