Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 24 Oct 2008 14:36:03 GMT
From:      Thomas Beery <tbeery@lanl.gov>
To:        freebsd-gnats-submit@FreeBSD.org
Subject:   docs/128342: Handbook 5.4.2 "Configuring X11" should suggest using window manager for screen resolution
Message-ID:  <200810241436.m9OEa3kn097957@www.freebsd.org>
Resent-Message-ID: <200810241440.m9OEe1n7069222@freefall.freebsd.org>

next in thread | raw e-mail | index | archive | help

>Number:         128342
>Category:       docs
>Synopsis:       Handbook 5.4.2 "Configuring X11" should suggest using window manager for screen resolution
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    freebsd-doc
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          change-request
>Submitter-Id:   current-users
>Arrival-Date:   Fri Oct 24 14:40:01 UTC 2008
>Closed-Date:
>Last-Modified:
>Originator:     Thomas Beery
>Release:        6.3
>Organization:
Los Alamos National Laboratory
>Environment:
FreeBSD tchrom.lanl.gov 6.3-RELEASE FreeBSD 6.3-RELEASE #0: Wed Jan 16 04:45:45 UTC 2008     root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP  i386

>Description:
Handbook section 5.4.2, "Configuring X11" says"
 
"As of version 7.3, Xorg can often work without any configuration file by simply typing at prompt:

% startx

If this does not work, or if the default configuration is not acceptable, then X11 must be configured manually. ....."

In my case a screen resolution of 1280x1024 at 60Hz on analog was desired. Startx gave a resolution of 1024x768. It was much easier to start XFce and change the resolution using the "Display Settings" tool than to edit /etc/X11/xorg.conf .
>How-To-Repeat:
Matrox M400 board, broken i2c/ddc, 1280x1024 @ 60Hz desired.
>Fix:
Change Handbook section 5.4.2 "Configuring X11" to read:

..

% startx

If the default configuration is not acceptable, continue with the installation of Gnome, KDE, or XFce and try to set resolution/frequency using the appropriate tool. If this does not work or "startx" does not display anything at all, then X11 must be configured manually.

>Release-Note:
>Audit-Trail:
>Unformatted:



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200810241436.m9OEa3kn097957>