Date: Fri, 2 Jan 2004 11:48:58 -0700 From: "John R. Shannon" <john@johnrshannon.com> To: freebsd-hardware@freebsd.org Subject: umass conflicts with scsi disk drives Message-ID: <200401021148.59704.john@johnrshannon.com>
next in thread | raw e-mail | index | archive | help
=2D----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
SuperMicro 370DE6 motherboard
dual P3
I'm experiencing a problem where umass is appropriating da0 and da1 after=20
these have been assigned to SCSI hard-drives. This is only a problem if the=
=20
Sandisk CF card reader is attached when the system boots; otherwise, device=
=20
assignment looks correct.
Dmesg output, CF reader inserted after system boot, follows:
=46reeBSD 5.2-CURRENT #0: Thu Jan 1 14:37:39 MST 2004
root@pablo.internal.johnrshannon.com:/usr/obj/usr/src/sys/MYKERNEL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0770000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc077026c.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (999.52-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x686 Stepping =3D 6
Features=3D0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory =3D 1073676288 (1023 MB)
avail memory =3D 1045360640 (996 MB)
ACPI APIC Table: <RCC RCCNILE >
=46reeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
Pentium Pro MTRR support enabled
ACPI-0671: *** Warning: Type override - [DEB_] had invalid type (Intege=
r)=20
for Scope operator, changed to (Scope)
ACPI-0671: *** Warning: Type override - [MLIB] had invalid type (Intege=
r)=20
for Scope operator, changed to (Scope)
ACPI-0671: *** Warning: Type override - [IO__] had invalid type (Intege=
r)=20
for Scope operator, changed to (Scope)
ACPI-0671: *** Warning: Type override - [DATA] had invalid type (String=
)=20
for Scope operator, changed to (Scope)
ACPI-0671: *** Warning: Type override - [SIO_] had invalid type (String=
)=20
for Scope operator, changed to (Scope)
ACPI-0671: *** Warning: Type override - [SB__] had invalid type (String=
)=20
for Scope operator, changed to (Scope)
ACPI-0671: *** Warning: Type override - [PM__] had invalid type (String=
)=20
for Scope operator, changed to (Scope)
ACPI-0671: *** Warning: Type override - [ICNT] had invalid type (String=
)=20
for Scope operator, changed to (Scope)
ACPI-0671: *** Warning: Type override - [ACPI] had invalid type (String=
)=20
for Scope operator, changed to (Scope)
ACPI-0671: *** Warning: Type override - [OSB4] had invalid type (String=
)=20
for Scope operator, changed to (Scope)
ACPI-0671: *** Warning: Type override - [PM__] had invalid type (String=
)=20
for Scope operator, changed to (Scope)
ACPI-0671: *** Warning: Type override - [BIOS] had invalid type (Intege=
r)=20
for Scope operator, changed to (Scope)
ACPI-0671: *** Warning: Type override - [CMOS] had invalid type (Intege=
r)=20
for Scope operator, changed to (Scope)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <RCC RCCNILE > on motherboard
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
pcibios: BIOS version 2.10
Using $PIR table, 10 entries at 0xc00f5350
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_cpu1: Failed to attach throttling P_CNT
acpi_cpu2: <CPU> on acpi0
device_probe_and_attach: acpi_cpu2 attach returned 6
acpi_cpu2: <CPU> on acpi0
device_probe_and_attach: acpi_cpu2 attach returned 6
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 15 INTA is routed to irq 10
pcib1: <ACPI PCI-PCI bridge> at device 0.1 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
ohci0: <OPTi 82C861 (FireLink) USB controller> mem 0xfeafc000-0xfeafcfff ir=
q=20
16 at device 1.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OPTi 82C861 (FireLink) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: OPTi OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <multimedia, audio> at device 2.0 (no driver attached)
ahc0: <Adaptec 3960D Ultra160 SCSI adapter> port 0xc400-0xc4ff mem=20
0xfeafd000-0xfeafdfff irq 28 at device 4.0 on pci0
aic7899: Ultra160 Wide Channel A, SCSI Id=3D7, 32/253 SCBs
ahc1: <Adaptec 3960D Ultra160 SCSI adapter> port 0xc800-0xc8ff mem=20
0xfeafe000-0xfeafefff irq 29 at device 4.1 on pci0
aic7899: Ultra160 Wide Channel B, SCSI Id=3D7, 32/253 SCBs
ahc2: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd000-0xd0ff mem=20
0xfeadc000-0xfeadcfff irq 26 at device 5.0 on pci0
aic7899: Ultra160 Wide Channel A, SCSI Id=3D7, 32/253 SCBs
ahc3: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd800-0xd8ff mem=20
0xfeadf000-0xfeadffff irq 27 at device 5.1 on pci0
aic7899: Ultra160 Wide Channel B, SCSI Id=3D7, 32/253 SCBs
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xd400-0xd43f mem=20
0xfe900000-0xfe9fffff,0xfeadd000-0xfeaddfff irq 31 at device 6.0 on pci0
fxp0: Ethernet address 00:30:48:10:79:16
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> port 0x580-0x58f at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 UDMA33 controller> port 0xffa0-0xffaf at device=
=20
15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
ohci1: <OHCI (generic) USB controller> mem 0xfeaff000-0xfeafffff irq 10 at=
=20
device 15.2 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
pcib2: <ACPI Host-PCI bridge> on acpi0
pci2: <ACPI PCI bus> on pcib2
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: cmd 3 failed at out byte 1 of 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acpi_cpu2: <CPU> on acpi0
device_probe_and_attach: acpi_cpu2 attach returned 6
acpi_cpu2: <CPU> on acpi0
device_probe_and_attach: acpi_cpu2 attach returned 6
fdc0: cmd 3 failed at out byte 1 of 3
orm0: <Option ROMs> at iomem 0xcd000-0xd2fff,0xcc000-0xccfff,0xc0000-0xcaff=
f=20
on isa0
pmtimer0 on isa0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port=20
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
Waiting 15 seconds for SCSI devices to settle
acpi_cpu: throttling enabled, 16 steps (100% to 6.2%), currently 100.0%
GEOM: create disk cd0 dp=3D0xc5fe6600
GEOM: create disk da0 dp=3D0xc601b050
GEOM: create disk da1 dp=3D0xc5fd8c50
GEOM: create disk da2 dp=3D0xc6002c50
GEOM: create disk da3 dp=3D0xc6028050
da0 at ahc2 bus 0 target 0 lun 0
da0: <SEAGATE ST318452LW 0004> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing=20
Enabled
da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
SMP: AP CPU #1 Launched!
da1 at ahc3 bus 0 target 1 lun 0
da1: <IBM DNES-318350W SA30> Fixed Direct Access SCSI-3 device
da1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing=20
Enabled
da1: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
da2 at ahc3 bus 0 target 8 lun 0
da2: <IBM DNES-318350W SA30> Fixed Direct Access SCSI-3 device
da2: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing=20
Enabled
da2: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
da3 at ahc3 bus 0 target 9 lun 0
da3: <IBM DNES-318350W SA30> Fixed Direct Access SCSI-3 device
da3: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing=20
Enabled
da3: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
cd0 at ahc0 bus 0 target 5 lun 0
cd0: <YAMAHA CRW2100S 1.0H> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 7)
cd0: cd present [65191 x 2048 byte records]
Mounting root from ufs:/dev/da0s1a
fxp0: Microcode loaded, int_delay: 1000 usec bundle_max: 6
fxp0: Microcode loaded, int_delay: 1000 usec bundle_max: 6
umass0: SanDisk Corporation ImageMate CF-SM, rev 1.10/1.00, addr 2
GEOM: create disk da4 dp=3D0xc5e0cc50
da4 at umass-sim0 bus 0 target 0 lun 0
da4: <SanDisk ImageMate CF-SM 0100> Removable Direct Access SCSI-0 device
da4: 1.000MB/s transfers
da4: Attempt to query device size failed: NOT READY, Medium not present
(da4:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da4:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da4:umass-sim0:0:0:0): SCSI Status: Check Condition
(da4:umass-sim0:0:0:0): NOT READY asc:3a,0
(da4:umass-sim0:0:0:0): Medium not present
(da4:umass-sim0:0:0:0): Unretryable error
Opened disk da4 -> 6
(da4:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da4:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da4:umass-sim0:0:0:0): SCSI Status: Check Condition
(da4:umass-sim0:0:0:0): NOT READY asc:3a,0
(da4:umass-sim0:0:0:0): Medium not present
(da4:umass-sim0:0:0:0): Unretryable error
Opened disk da4 -> 6
GEOM: create disk da5 dp=3D0xc5e5b850
da5 at umass-sim0 bus 0 target 0 lun 1
da5: <SanDisk ImageMate CF-SM 0100> Removable Direct Access SCSI-0 device
da5: 1.000MB/s transfers
da5: Attempt to query device size failed: NOT READY, Medium not present
(da5:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da5:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da5:umass-sim0:0:0:1): SCSI Status: Check Condition
(da5:umass-sim0:0:0:1): NOT READY asc:3a,0
(da5:umass-sim0:0:0:1): Medium not present
(da5:umass-sim0:0:0:1): Unretryable error
Opened disk da5 -> 6
(da5:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da5:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da5:umass-sim0:0:0:1): SCSI Status: Check Condition
(da5:umass-sim0:0:0:1): NOT READY asc:3a,0
(da5:umass-sim0:0:0:1): Medium not present
(da5:umass-sim0:0:0:1): Unretryable error
Opened disk da5 -> 6
=2D --=20
John R. Shannon
john@johnrshannon.com
=2D----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (NetBSD)
iEYEARECAAYFAj/1vRoACgkQOKbCxya4HYuA6gCgnd7IZvzYrjXYd5nOJ2njUl8X
gaAAoK7Y+yTXn/rEAcTgClor55pQgiVC
=3DE/PB
=2D----END PGP SIGNATURE-----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200401021148.59704.john>