Date: Thu, 15 Jun 2000 15:26:36 -0400 (EDT) From: Matt Heckaman <matt@ARPA.MAIL.NET> To: David Bushong <david@bushong.net> Cc: freebsd-stable@freebsd.org Subject: Re: crunchy sound with newpcm Message-ID: <Pine.BSF.4.21.0006151526070.9492-100000@epsilon.lucida.qc.ca> In-Reply-To: <20000615122227.T79778@bushong.net>
next in thread | previous in thread | raw e-mail | index | archive | help
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 If you're using something like XMMS or anything that uses a mixer - turn it off. I had this exact same problem with winamp until I turned off the mixer feature which does not like to work over here. Matt On Thu, 15 Jun 2000, David Bushong wrote: : Date: Thu, 15 Jun 2000 15:22:27 -0400 : From: David Bushong <david@bushong.net> : To: freebsd-stable@freebsd.org : Subject: crunchy sound with newpcm : : My coworker had this problem about a month before I did, and now the same : thing's happened to me: : : At some indeterminate point (for both of us, it was after a crash or a reboot : or some other event, NOT immediately after a new -STABLE build), sound : coming out (mp3s, regular wavs, anything going to /dev/dsp) comes out sounding : crunchy and garbled. I just have : : device pcm : : in my config file, /dev/sndstat says: : : FreeBSD Audio Driver (newpcm) Jun 9 2000 12:35:40 : Installed devices: : pcm0: <Yamaha OPL-SAx> at io 0x530 irq 5 drq 0:1 (1p/1r channels duplex) : : and the dmesg says: : : pcm0: <Yamaha OPL-SAx> at port 0x220-0x22f,0x530-0x537,0x388-0x38f,0x330-0x331,0x370-0x371 irq 5 drq 0,1 on isa0 : unknown0: <OPL3-SA3 Snd System> at port 0x201 on isa0 : : (and all of those ranges, irq, and drqs check out in windows). It's actually : an onboard sound chip on a Dell Dimension XPS D266, and (as always), it : "used to work just fine". : : Anyone else seen this? Any thoughts? I've loved the newpcm driver for its : simple one line, no options configuration, but now I feel helpless without : settings to fiddle with ;) : : --David Bushong : : : To Unsubscribe: send mail to majordomo@FreeBSD.org : with "unsubscribe freebsd-stable" in the body of the message : Matt Heckaman matt@arpa.mail.net http://www.lucida.qc.ca -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.1 (FreeBSD) Comment: http://www.lucida.qc.ca/pgp iD8DBQE5SS3vdMMtMcA1U5ARAqFJAJ4orc8e/06i3z0DTNgVOcroy5rKcwCfeAqh aslqAcWGuJTP3mcnyxAQSAg= =9Y4f -----END PGP SIGNATURE----- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0006151526070.9492-100000>