Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 4 Feb 2004 12:35:10 -0800
From:      "Jeff Klein" <jklein@zonelabs.com>
To:        <FreeBSD-current@freebsd.org>
Subject:   AE_AML_INVALID_RESOURCE_TYPE error in 5.2-CURRENT
Message-ID:  <EDDB9FD383E3DB44B3AF605FA429C17202891F@exmb2.zonelabs.com>

next in thread | raw e-mail | index | archive | help
Hi All,

I cvsup'ed to the latest and ran "make buildworld" last night (about 7pm
PST).  I was previously running 5.1-RELEASE, but was having problems
with SMP support.  The good news is that the SMP support (w/ device
apic) seems to be working well now, but the bad news is that I am
getting a new error in the kernel at boot time:

can't fetch resources for \\_SB_.LN1_ - AE_AML_INVALID_RESOURCE_TYPE

-and-

pcib0: couldn't get PCI interrupt link device _CRS data -
AE_AML_INVALID_RESOURCE_TYPE

This doesn't seem to be causing any serious problems so far, but I have
only been running on it for less than 24 hours, so it is too early to
tell.  Does anyone know if this is serious? (and if there is a
fix/workaround?). Output from dmesg is below.

Thanks and regards,
Jeff Klein

------------------------- dmesg output -----------------------------

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights
reserved. FreeBSD 5.2-CURRENT #1: Tue Feb  3 23:43:49 PST 2004
    root@weckl:/usr/obj/usr/src/sys/WECKL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc07ff000. Preloaded elf
module "/boot/kernel/acpi.ko" at 0xc07ff26c.
ACPI APIC Table: <INTEL  	 APIC  >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2399.67-MHz 686-class CPU)
  Origin =3D "GenuineIntel"  Id =3D 0xf27  Stepping =3D 7
=20
Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E
,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Hyperthreading: 2 logical CPUs
real memory  =3D 1073741824 (1024 MB)
avail memory =3D 1045336064 (996 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  6
 cpu3 (AP): APIC ID:  7
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <INTEL   RSDT> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 16 entries at 0xc00fdec0
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
can't fetch resources for \\_SB_.LN1_ - AE_AML_INVALID_RESOURCE_TYPE
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_cpu2: <CPU> on acpi0
acpi_cpu3: <CPU> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: couldn't get PCI interrupt link device _CRS data -
AE_AML_INVALID_RESOURCE_TYPE
pci0: <display, VGA> at device 2.0 (no driver attached)
fxp0: <Intel 82550 Pro/100 Ethernet> port 0x2400-0x243f mem
0xfc000000-0xfc01ffff,0xfc021000-0xfc021fff irq 18 at device 3.0 on pci0
fxp0: Ethernet address 00:02:b3:52:36:7b
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks CSB5 UDMA100 controller> port
0x2440-0x244f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device
15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
ohci0: <OHCI (generic) USB controller> mem 0xfc022000-0xfc022fff irq 10
at device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port
0x2460-0x247f mem 0xfc300000-0xfc31ffff,0xfc320000-0xfc33ffff irq 19 at
device 4.0 on pci1
em0:  Speed:N/A  Duplex:N/A
pcib2: <ACPI Host-PCI bridge> on acpi0
pci2: <ACPI PCI bus> on pcib2
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x2800-0x28ff mem
0xfc700000-0xfc700fff irq 16 at device 9.0 on pci2
aic7899: Ultra160 Wide Channel A, SCSI Id=3D7, 32/253 SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x3000-0x30ff mem
0xfc701000-0xfc701fff irq 17 at device 9.1 on pci2
aic7899: Ultra160 Wide Channel B, SCSI Id=3D7, 32/253 SCBs
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 1 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
acpi_ec0: <Embedded Controller: GPE 0x35> port 0xca7,0xca6 on acpi0
pmtimer0 on isa0
orm0: <Option ROMs> at iomem
0xcb000-0xd0fff,0xc9800-0xcafff,0xc8000-0xc97ff,0xc0000-0xc7fff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=3D0x200>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0 Timecounters tick every 10.000 msec
acd0: CDRW <YAMAHA CRW2100E> at ata0-master PIO4
Waiting 15 seconds for SCSI devices to settle
da0 at ahc0 bus 0 target 0 lun 0
da0: <QUANTUM ATLAS 10K 9WLS UC81> Fixed Direct Access SCSI-3 device=20
da0: 160.000MB/s transfers (80.000MHz, offset 31, 16bit), Tagged
Queueing Enabled
da0: 8683MB (17783249 512 byte sectors: 255H 63S/T 1106C)
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Mounting root from ufs:/dev/da0s1a
em0: Link is up 100 Mbps Full Duplex



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?EDDB9FD383E3DB44B3AF605FA429C17202891F>