Date: Sun, 6 Aug 1995 15:38:49 -0700 From: Timothy Moore <moore@WOLFE.net> To: msmith@atrad.adelaide.edu.au Cc: jmb@kryten.Atinc.COM, questions@freebsd.org Subject: Re: Problems installing a serial card... Message-ID: <199508062238.PAA10995@gonzo.wolfe.net> In-Reply-To: Michael Smith's message of Thu, 27 Jul 1995 15:14:07 %2B0930 (CST) <199507270544.PAA06639@genesis.atrad.adelaide.edu.au>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi,
If your remember a couple of weeks ago I was having problems with a
serial card. I finally got around to enabling CONFIG_VERBOSE in the
sio driver. Here's the dmesg output. The problems are obviously irq
related. But, I'm pretty sure I've set the jumpers on the card
correctly unless the documentation is completely wrong. See anything
obvious?
Thanks,
Tim
6 2 0x0 0 0 0x0 Yes
wdc0 0x1f0 14 -1 0x0 0 0 0x0 Yes
wdc1 0x170 15 -1 0x0 0 1 0x0 Yes
bt0 0x330 -1 -1 0x0 0 0 0x0 Yes
uha0 0x330 -1 5 0x0 0 0 0x0 Yes
ahc1 0x0 -1 -1 0x0 0 1 0x0 Yes
ahb0 0x0 -1 -1 0x0 0 0 0x0 Yes
aha0 0x330 -1 5 0x0 0 0 0x0 Yes
aic0 0x340 11 -1 0x0 0 0 0x0 Yes
nca0 0x1f88 10 -1 0x0 0 0 0x0 No
nca1 0x350 5 -1 0x0 0 1 0x0 No
sea0 0x0 5 -1 0xc8000 8192 0 0x0 No
wt0 0x300 5 1 0x0 0 0 0x0 No
mcd0 0x300 10 -1 0x0 0 0 0x0 No
mcd1 0x340 11 -1 0x0 0 1 0x0 No
matcd0 0xffffffff -1 -1 0x0 0 0 0x0 Yes
scd0 0x230 -1 -1 0x0 0 0 0x0 Yes
sc0 0x60 1 -1 0x0 0 0 0x0 Yes
sio0 0x3f8 4 -1 0x0 0 0 0x0 Yes
sio1 0x2f8 3 -1 0x0 0 1 0x0 Yes
sio2 0x3e8 10 -1 0x0 0 2 0x80 Yes
sio3 0x2e8 11 -1 0x0 0 3 0x80 Yes
Device port irq drq iomem iosize unit flags enabled
lpt0 0xffffffff 7 -1 0x0 0 0 0x0 Yes
lpt1 0xffffffff -1 -1 0x0 0 1 0x0 Yes
lpt2 0xffffffff -1 -1 0x0 0 2 0x0 Yes
ed0 0x280 5 -1 0xd8000 0 0 0x0 No
ed1 0x300 5 -1 0xd8000 0 1 0x0 Yes
ie0 0x360 7 -1 0xd0000 0 0 0x0 No
ep0 0x300 10 -1 0x0 0 0 0x0 No
ix0 0x300 10 -1 0xd0000 32768 0 0x0 No
le0 0x300 5 -1 0xd0000 0 0 0x0 No
lnc0 0x280 10 0 0x0 0 0 0x0 No
lnc1 0x300 5 5 0x0 0 1 0x0 No
ze0 0x300 5 -1 0xd8000 0 0 0x0 No
zp0 0x300 10 -1 0xd8000 0 0 0x0 No
npx0 0xf0 13 -1 0x0 0 0 0x0 Yes
config> quit
avail memory = 6873088 (1678 pages)
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0: disabled, not probed.
ed1 at 0x300-0x31f irq 5 on isa
ed1: address 00:c0:0c:20:64:d6, type NE2000 (16 bit)
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16450
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16450
sio2: probe test 3 failed
sio2 not found at 0x3e8
sio3: probe test 5 failed
sio3: probe test 8 failed
sio3 not found at 0x2e8
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
lpt1 not found at 0xffffffff
lpt2 not found at 0xffffffff
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 765
fd0: 1.44MB 3.5in
fd1: 1.2MB 5.25in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <WDC AC2340>
wd0: 325MB (666600 sectors), 1010 cyls, 12 heads, 55 S/T, 512 B/S
wdc1 not found at 0x170
bt0 not found at 0x330
uha0 not found at 0x330
ahc1 not found
ahb0 not found
aha0 not found at 0x330
aic0 not found at 0x340
nca0: disabled, not probed.
nca1: disabled, not probed.
sea0: disabled, not probed.
wt0: disabled, not probed.
mcd0: disabled, not probed.
mcd1: disabled, not probed.
matcd0 not found at 0xffffffff
scd0 not found at 0x230
ie0: disabled, not probed.
ep0: disabled, not probed.
ix0: disabled, not probed.
le0: disabled, not probed.
lnc0: disabled, not probed.
lnc1: disabled, not probed.
ze0: disabled, not probed.
zp0: disabled, not probed.
npx0 on motherboard
npx0: INT 16 interface
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199508062238.PAA10995>