Date: Thu, 16 Sep 2004 07:50:24 GMT From: Leroy van Logchem <leroy.vanlogchem@wldelft.nl> To: freebsd-scsi@FreeBSD.org Subject: Re: kern/71778: 5.3 BETA3 doesnt see Adaptec 2015S FW Rev. 3B05, 2 ch, 256 CCBs, Protocol I2O while 4.10-RELEASE can use it Message-ID: <200409160750.i8G7oOqC074741@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/71778; it has been noted by GNATS.
From: Leroy van Logchem <leroy.vanlogchem@wldelft.nl>
To: freebsd-gnats-submit@freebsd.org, Leroy.vanLogchem@wldelft.nl
Cc:
Subject: Re: kern/71778: 5.3 BETA3 doesnt see Adaptec 2015S FW Rev. 3B05,
2 ch, 256 CCBs, Protocol I2O while 4.10-RELEASE can use it
Date: Thu, 16 Sep 2004 09:48:15 +0200
Output of 'pciconf -lv':
------------------------
hostb0@pci0:0:0: class=0x060000 card=0x358015d9 chip=0x254c8086
rev=0x01 hdr=0x00
class = bridge
subclass = HOST-PCI
none0@pci0:0:1: class=0xff0000 card=0x358015d9 chip=0x25418086 rev=0x01
hdr=0x00
pcib1@pci0:2:0: class=0x060400 card=0x00000000 chip=0x25438086 rev=0x01
hdr=0x01
class = bridge
subclass = PCI-PCI
uhci0@pci0:29:0: class=0x0c0300 card=0x358015d9 chip=0x24828086
rev=0x02 hdr=0x00
class = serial bus
subclass = USB
uhci1@pci0:29:1: class=0x0c0300 card=0x358015d9 chip=0x24848086
rev=0x02 hdr=0x00
class = serial bus
subclass = USB
uhci2@pci0:29:2: class=0x0c0300 card=0x358015d9 chip=0x24878086
rev=0x02 hdr=0x00
class = serial bus
subclass = USB
pcib4@pci0:30:0: class=0x060400 card=0x00000000 chip=0x244e8086
rev=0x42 hdr=0x01
class = bridge
subclass = PCI-PCI
isab0@pci0:31:0: class=0x060100 card=0x00000000 chip=0x24808086
rev=0x02 hdr=0x00
class = bridge
subclass = PCI-ISA
atapci0@pci0:31:1: class=0x01018a card=0x358015d9 chip=0x248b8086
rev=0x02 hdr=0x00
class = mass storage
subclass = ATA
none1@pci0:31:3: class=0x0c0500 card=0x358015d9 chip=0x24838086
rev=0x02 hdr=0x00
class = serial bus
subclass = SMBus
none2@pci1:28:0: class=0x080020 card=0x358015d9 chip=0x14618086
rev=0x04 hdr=0x00
class = base peripheral
subclass = interrupt controller
pcib2@pci1:29:0: class=0x060400 card=0x00000050 chip=0x14608086
rev=0x04 hdr=0x01
class = bridge
subclass = PCI-PCI
none3@pci1:30:0: class=0x080020 card=0x358015d9 chip=0x14618086
rev=0x04 hdr=0x00
class = base peripheral
subclass = interrupt controller
pcib3@pci1:31:0: class=0x060400 card=0x00000050 chip=0x14608086
rev=0x04 hdr=0x01
class = bridge
subclass = PCI-PCI
em0@pci2:3:0: class=0x020000 card=0x10118086 chip=0x10108086 rev=0x01
hdr=0x00
class = network
subclass = ethernet
em1@pci2:3:1: class=0x020000 card=0x10118086 chip=0x10108086 rev=0x01
hdr=0x00
class = network
subclass = ethernet
asr0@pci3:3:0: class=0x010400 card=0xc0341044 chip=0xa5111044 rev=0x01
hdr=0x00
class = mass storage
subclass = RAID
none4@pci4:1:0: class=0x030000 card=0x00081002 chip=0x47521002 rev=0x27
hdr=0x00
class = display
subclass = VGA
Output of 'pnpinfo':
--------------------
Checking for Plug-n-Play devices...
No Plug-n-Play devices were found
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200409160750.i8G7oOqC074741>