Date: Fri, 23 Aug 1996 14:23:21 +0800 (CST) From: Lee Guo-hua <ghlee@zeus.csie.nctu.edu.tw> To: freebsd-scsi@freebsd.org Subject: <Help> Exabyte 8200 tape driver Message-ID: <199608230621.OAA00617@zeus.csie.nctu.edu.tw>
next in thread | raw e-mail | index | archive | help
Does anyone has experiences with Exabyte 8200 8mm tape driver on 2.1.5?
The message is as below :
----------------------------------------------------------------------------
root[~] % dump 0dsbfu 54000 6000 126 /dev/nrst0 /home
DUMP: Date of this level 0 dump: Fri Aug 23 14:14:10 1996
DUMP: Date of last level 0 dump: the epoch
DUMP: Dumping /dev/rsd0s2f (/home) to /dev/nrst0
DUMP: mapping (Pass I) [regular files]
DUMP: mapping (Pass II) [directories]
DUMP: estimated 5340 tape blocks on 0.00 tape(s).
DUMP: dumping (Pass III) [directories]
DUMP: dumping (Pass IV) [regular files]
DUMP: End of tape detected
DUMP: Closing /dev/nrst0
DUMP: Change Volumes: Mount volume #2
DUMP: Is the new volume mounted and ready to go?: ("yes" or "no") y
DUMP: Volume 2 begins with blocks from inode 0
DUMP: EOT detected at start of the tape!
DUMP: The ENTIRE dump is aborted.
----------------------------------------------------------------------
And "st0: oops not queued" appears at the end of dmesg...
######################################################################
root[~] % dmesg
FreeBSD 2.1.5-RELEASE #0: Fri Aug 23 07:09:17 CST 1996
root@venus.csie.nctu.edu.tw:/usr/src/sys/compile/venus
CPU: i486DX (486-class CPU)
real memory = 67108864 (65536K bytes)
avail memory = 63262720 (61780K bytes)
Probing for devices on PCI bus 0:
chip0 <Intel 82439> rev 1 on pci0:0
chip1 <Intel 82371 PCI-ISA bridge> rev 0 on pci0:7:0
chip2 <Intel 82371 Bus-Master IDE controller> rev 0 on pci0:7:1
ahc0 <Adaptec 2940 Ultra SCSI host adapter> rev 0 int a irq 11 on pci0:15
ahc0: aic7880 Single Channel, SCSI Id=7, 16 SCBs
ahc0 waiting for scsi devices to settle
ahc0:A:4: refuses syncronous negotiation. Using asyncronous transfers
(ahc0:4:0): "EXABYTE EXB-8200 2680" type 1 removable SCSI 1
st0(ahc0:4:0): Sequential-Access drive offline
ahc0: target 6 Tagged Queuing Device
(ahc0:6:0): "SEAGATE ST32155N 0318" type 0 fixed SCSI 2
sd0(ahc0:6:0): Direct-Access 2049MB (4197405 512 byte sectors)
vga0 <VGA-compatible display device> rev 0 int a irq 10 on pci0:17
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 at 0x300-0x31f irq 15 on isa
ed0: address 00:00:e8:c5:80:c0, type NE2000 (16 bit)
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 not found at 0x2f8
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
npx0 on motherboard
npx0: INT 16 interface
st0: oops not queued
st0: oops not queued
st0: oops not queued
##########################################################################
How can I solve this problem?
Thanks !!
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199608230621.OAA00617>