Date: Wed, 04 Feb 2004 15:04:34 -0600 From: Jon Noack <noackjr@compgeek.com> To: Rhiannon <rhiannon@bitworks.hu> Cc: freebsd-current@freebsd.org Subject: Re: HPT374 Driver in -CURRENT Message-ID: <40215E62.10901@compgeek.com> In-Reply-To: <1075928269.11920.2.camel@rhiannon.local> References: <Pine.LNX.4.44.0402040904440.27603-100000@mail.amarand.org> <4021533E.5050506@compgeek.com> <1075928269.11920.2.camel@rhiannon.local>
next in thread | previous in thread | raw e-mail | index | archive | help
On 2/4/2004 2:57 PM, Rhiannon wrote: > 2004-02-04, sze keltez=E9ssel 21:17-kor Jon Noack ezt =EDrta: >>On 2/4/2004 8:07 AM, freebsd@amarand.org wrote: >>>I would like to start using -CURRENT however, I have a dependency on=20 >>>driver support for the Rocketraid 404 which contains that HPT374=20 >>>(Highpoint) chipset. The vendor has 4 through 5 drivers compiled as=20 >>>kernel load modules up to 5.1, and only "Linux Source" available. Is t= his=20 >>>something that should be supported natively in the kernel, or do I nee= d to=20 >>>go down some other path? >> >>man 4 ata >>http://www.freebsd.org/cgi/man.cgi?query=3Data&sektion=3D4&manpath=3DFr= eeBSD+5.2-current >> >>To summarize: >>The HPT374 is supported by the ata driver which is "built-in" to FreeBS= D=20 >>(included in the GENERIC kernel). >> >>Jon Noack >=20 > And RAID 0 or 1 mode supported ? The following option is needed for ata raid: device ataraid This is also "built-in" to FreeBSD (included in the GENERIC kernel). As=20 such, your configuration should work out-of-the-box. I use an HPT370A with RAID 1. Here is the appropriate section of my=20 kernel config file (modified from GENERIC -- GENERIC works as well): # ATA and ATAPI devices device ata device atadisk # ATA disk drives device ataraid # ATA RAID drives device atapicd # ATAPI CDROM drives options ATA_STATIC_ID #Static device numbering Jon Noack
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?40215E62.10901>