Date: Sun, 29 Apr 2001 23:42:13 +0200 (CEST) From: "Hartmann, O." <ohartman@klima.physik.uni-mainz.de> To: <freebsd-stable@freebsd.org> Cc: <freebsd-smp@freebsd.org> Subject: Spontanous reboot of SMP system and FBSD 4.3 Message-ID: <Pine.BSF.4.33.0104292327270.83323-100000@klima.physik.uni-mainz.de>
next in thread | raw e-mail | index | archive | help
Dear Sirs.
One of our server systems, a TYAN Thunder 2500 ServerWorks Set III HE
based dual PIII based machine with AMI Enterprise 1600 RAID and 2GB
RAM seems to reboot spontanously without any reason. This is the first
time I realise this without having APM enabled into the kernel, which
has been detected to be a reason for spontanous reboots on boards
without APM to us.
Well, in the time this machine rebooted itself there was no load, no
extraordinary activity or heavy load. I realised this this morning
checking the logs.
Several days ago someone asked in the list for stability issues concerning
SMP on several architectures and I responded that our TYAN Thunder 2500
based boards have run for a long time. I think I have to revise this
statement. I hope it is a simple problem with the kernel config because
the selected hardware, power supplies and UPS system we use is first
choice for this system and showed no problems before.
Does anyone know, whether the kernel options AUTO_EOI1 and AUTO_EOI2
do have serious impacts on stability? On this machine we configured kernel
with both options "ON" and have had no problems within the last 9
months. I know that many system boards do not work with both options
set, but the TYAN Thunder 2500 seems to do - but could this be the reason
for spontanous reboots?
Please help, all hints a tips are appreciated.
I add the dmesg output of the system here:
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-STABLE #74: Thu Apr 26 21:25:13 CEST 2001
root@atmos.physik.uni-mainz.de:/usr/obj/usr/src/sys/ATMOS
Timecounter "i8254" frequency 1193094 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (868.57-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 2147483648 (2097152K bytes)
avail memory = 2087288832 (2038368K bytes)
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 16 pins in IOAPIC #1
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x000f0011, at 0xfec00000
io1 (APIC): apic id: 3, version: 0x000f0011, at 0xfec01000
Preloaded elf kernel "kernel" at 0xc03d8000.
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #1 intpin 13 -> irq 2
IOAPIC #1 intpin 12 -> irq 16
IOAPIC #1 intpin 14 -> irq 17
IOAPIC #1 intpin 7 -> irq 18
IOAPIC #1 intpin 0 -> irq 19
pci0: <PCI bus> on pcib0
pcib3: <PCI to PCI bridge (vendor=1166 device=0005)> at device 0.1 on pci0
IOAPIC #1 intpin 1 -> irq 20
pci1: <PCI bus> on pcib3
pci1: <NVidia Riva TNT2 graphics accelerator> at 0.0 irq 20
sym0: <896> port 0xf800-0xf8ff mem 0xfeafe000-0xfeafffff,0xfeafac00-0xfeafafff irq 2 at device 1.0 on pci0
sym0: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: handling phase mismatch from SCRIPTS.
sym1: <896> port 0xf400-0xf4ff mem 0xfeafc000-0xfeafdfff,0xfeafa800-0xfeafabff irq 16 at device 1.1 on pci0
sym1: Symbios NVRAM, ID 7, Fast-40, SE, parity checking
sym1: open drain IRQ line driver, using on-chip SRAM
sym1: using LOAD/STORE-based firmware.
sym1: handling phase mismatch from SCRIPTS.
pcm0: <AudioPCI ES1371> port 0xfcc0-0xfcff irq 17 at device 2.0 on pci0
pcib5: <DEC 21154 PCI-PCI bridge> at device 3.0 on pci0
IOAPIC #1 intpin 2 -> irq 21
pci2: <PCI bus> on pcib5
pcib6: <DEC 21154 PCI-PCI bridge> at device 0.0 on pci2
pci3: <PCI bus> on pcib6
amr0: <AMI MegaRAID> mem 0xf4000000-0xf7ffffff irq 19 at device 0.0 on pci3
amr0: <Series 471 40 Logical Drive Firmware> Firmware C158, BIOS 3.11, 64MB RAM
pci2: <unknown card> (vendor=0x1077, dev=0x1216) at 1.0 irq 20
pci2: <unknown card> (vendor=0x1077, dev=0x1216) at 2.0 irq 21
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xfc40-0xfc7f mem 0xfe900000-0xfe9fffff,0xfeaf9000-0xfeaf9fff irq 18 at device 7.0 on pci0
fxp0: Ethernet address 00:e0:81:00:f0:d7
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
pci0: <Unknown PCI ATA controller> at 15.1
pci0: <OHCI USB controller> at 15.2 irq 19
pcib1: <ServerWorks NB6536 2.0HE host to PCI bridge> on motherboard
pci4: <PCI bus> on pcib1
pcib2: <ServerWorks host to PCI bridge> on motherboard
pci5: <PCI bus> on pcib2
pcib4: <ServerWorks host to PCI bridge> on motherboard
pci6: <PCI bus> on pcib4
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <8 virtual consoles, flags=0x200>
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 flags 0x10 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 drq 1 flags 0x8 on isa0
ppc0: SMC-like chipset (ECP-only) in ECP mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
DUMMYNET initialized (010124)
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, unlimited logging
IPsec: Initialized Security Association Processing.
Waiting 4 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
(noperiph:sym1:0:-1:-1): SCSI BUS reset delivered.
amrd0: <MegaRAID logical drive> on amr0
amrd0: 245014MB (501788672 sectors) RAID 5 (optimal)
SMP: AP CPU #1 Launched!
sa0 at sym1 bus 0 target 5 lun 0
sa0: <HP C5713A H910> Removable Sequential Access SCSI-2 device
sa0: 40.000MB/s transfers (20.000MHz, offset 31, 16bit)
no devsw (majdev=0 bootdev=0xa0200000)
Mounting root from ufs:/dev/amrd0s1a
cd0 at sym1 bus 0 target 3 lun 0
cd0: <TEAC CD-ROM CD-532S 1.0A> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 16)
cd0: cd present [329963 x 2048 byte records]
ch0 at sym1 bus 0 target 5 lun 1
ch0: <HP C5713A H910> Removable Changer SCSI-2 device
ch0: 40.000MB/s transfers (20.000MHz, offset 31, 16bit)
ch0: 6 slots, 1 drive, 0 pickers, 0 portals
WARNING: / was not properly dismounted
link_elf: symbol splash_register undefined
fxp0: promiscuous mode enabled
arp: runt packet
arp: runt packet
Thanks in advance,
Oliver
--
MfG
O. Hartmann
ohartman@klima.physik.uni-mainz.de
----------------------------------------------------------------
IT-Administration des Institut fuer Physik der Atmosphaere (IPA)
----------------------------------------------------------------
Johannes Gutenberg Universitaet Mainz
Becherweg 21
55099 Mainz
Tel: +496131/3924662 (Maschinensaal)
Tel: +496131/3924144
FAX: +496131/3923532
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.33.0104292327270.83323-100000>