Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 4 Sep 2017 10:40:11 +0930
From:      "Priyadarshana Chandrasena" <vpc@ulka.com.au>
To:        "'Maciej Suszko'" <maciej@suszko.eu>
Cc:        <FreeBSD-stable@FreeBSD.org>
Subject:   RE: HP Smart array P440 support
Message-ID:  <001c01d3251a$92d20090$b87601b0$@ulka.com.au>
In-Reply-To: <20170903211908.510b5724@leo>
References:  <001501d323f2$3e517560$baf46020$@ulka.com.au> <20170903211908.510b5724@leo>

next in thread | previous in thread | raw e-mail | index | archive | help
I tried to install 11.1 but I still have the same error. UEFI boot mode does
not see my usb bootable media as of type UEFI. So still the Legacy BIOS is
the only option. Do I need to create the usb UEFI when I create the usb boot
disk?. 

-----Original Message-----
From: Maciej Suszko [mailto:maciej@suszko.eu] 
Sent: Monday, 4 September 2017 4:49 AM
To: Priyadarshana Chandrasena
Cc: FreeBSD-stable@FreeBSD.org
Subject: Re: HP Smart array P440 support

"Priyadarshana Chandrasena" <vpc@ulka.com.au> wrote:
> I have HP DL20 Gen 9 server. But I can not install FreeBSD 10.2 in it. 
> I have a HP smart array P440 in my server. I can not find out anywhere 
> if ciss driver support include HP Gen 9 storage controllers.  Could 
> you please update the ciss driver in 10.3?

Hi,

Got two DL20 with P440, UEFI booted 11.0 to logical disk (raid array).
In a few days I plan to boot it in HBA mode, we'll see if it's working.

A few messages:
#v+
root@storage-04:~ # uname -a
FreeBSD storage-04.gr 11.0-RELEASE-p8 FreeBSD 11.0-RELEASE-p8 #0: Wed Feb 22
06:12:04 UTC 2017
root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC  amd64

root@storage-04:~ # grep ciss /var/run/dmesg.boot
ciss0: <HP Smart Array P440> port 0x2000-0x20ff mem
0x92c00000-0x92cfffff,0x92d00000-0x92d003ff at device 0.0 numa-domain 0 on
pci2
ciss0: PERFORMANT Transport
da2 at ciss0 bus 0 scbus2 target 0 lun 0

root@storage-04:~ # camcontrol inquiry da2
pass2: <HP RAID 1(1+0) OK> Fixed Direct Access SPC-3 SCSI device
pass2: Serial Number PDNMF0ARH401MI
pass2: 135.168MB/s transfers, Command Queueing Enabled
#v-
--
regards, Maciej Suszko.




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001c01d3251a$92d20090$b87601b0$>