From owner-freebsd-stable Thu Mar 2 3:45:57 2000 Delivered-To: freebsd-stable@freebsd.org Received: from trinity.skynet.be (trinity.skynet.be [195.238.2.38]) by hub.freebsd.org (Postfix) with ESMTP id 4893D37BAE5 for ; Thu, 2 Mar 2000 03:45:54 -0800 (PST) (envelope-from blk@skynet.be) Received: from [195.238.1.121] (brad.techos.skynet.be [195.238.1.121]) by trinity.skynet.be (Postfix) with ESMTP id EE231122E9 for ; Thu, 2 Mar 2000 12:45:46 +0100 (MET) Mime-Version: 1.0 X-Sender: blk@pop.skynet.be Message-Id: Date: Thu, 2 Mar 2000 12:45:35 +0100 To: freebsd-stable@freebsd.org From: Brad Knowles Subject: Crash on boot when disks are present? Content-Type: text/plain; charset="us-ascii" ; format="flowed" Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Folks, This one is so weird that I don't have the foggiest clue how I'd go about searching the archives for answers. Searching for "crash on boot" netted me way more hits than I care to try to count. I've got a FreeBSD 3.4-STABLE system (cvsup'ed a couple of weeks ago) that I've been doing some tests with and it has been working pretty well up until now (after I got the issues of which PCI slots I can plug SCSI controllers into ;-). Anyway, the vendor field engineer for our disk drive array (one of those expensive mainframe-style refrigerator-size models) came in this morning to try to fix some problems we're having with it not recognizing all the RAM that is installed, and among other things he did a firmware upgrade of the controllers, and while we were at it we also deleted all the existing RAID groups and created some new ones, with new logical units associated, etc.... I've gone in and made sure that the BIOS has been changed (yet once again) to try to boot off the internal Quantum Atlas-IV drive that is attached to the AIC-7890 controller, because the external drive array does not have the OS installed, etc.... Unfortunately, when I try to boot with the drive array turned on, it crashes hard (during the bootloader phase, I think), displaying the following: F1 DOS F2 FreeBSD F5 Drive 1 Default: F2 - int=00000000 err=00000000 efl=00030083 eip=00000004 eax=000004e3 ebx=0000097f ecx=0000dc00 edx=000034be esi=0000dc00 edi=00000004 ebp=00000000 esp=000004ce cs=c800 ds=c800 es=9e7d fs=0000 gs=0000 ss=9e7b cs:eip=d4 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ss:esp=00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 I hope I got this right -- I don't have a serial console attached to the machine, so I had to type this in manually. Anyway, when I turn off the external drive array, it boots fine. I know I need to expand /var to accomodate /var/crash, but I don't think that this would actually generate a crash dump, for which this would be useful. Other than having the guy come back out to "upgrade" the controller firmware version back to what it was, does anyone have any other advice that they can give me as to what I might be able to do to debug the problem? Thanks! -- These are my opinions and should not be taken as official Skynet policy ========================================================================= Brad Knowles, Sys. Arch., Mail/News/FTP/Proxy Admin Note: No Microsoft programs were used in the creation or distribution of this message. If you are using a Microsoft program to view this message, be forewarned that I am not responsible for any harm you may encounter as a result. See for details. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message