Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 21 Jul 2017 12:12:14 -0400
From:      "James B. Byrne" <byrnejb@harte-lyne.ca>
To:        freebsd-questions@freebsd.org
Subject:   Re: UEFI and FreeBSD-11
Message-ID:  <c7b24e08cf6766ad306d682e495e9963.squirrel@webmail.harte-lyne.ca>
In-Reply-To: <971f810719a155f3963f2ff37c3488d3.squirrel@webmail.harte-lyne.ca>
References:  <971f810719a155f3963f2ff37c3488d3.squirrel@webmail.harte-lyne.ca>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help

On Thu, July 20, 2017 20:02, James B. Byrne wrote:
> My CentOS-6 based workstation is dying a slow death due to bit rot and
> so I decided to swap out the existing disc drive for another.  Given
> that I had to reinstall anyway I decided that now was the time to try
> out FreeBSD-11 as a desktop.
>
> This Intel based system had UEFI enabled.  Apparently this may have a
> surprising, to me, effect on the video display used for the system
> console in text mode.  For whatever reason the boot process insists on
> treating a 480x640 60Hz display as 800 x 480 at some other refresh
> rate, probably 75Hz.  This produces a difficult to read flickering
> display and oddball presentation artifacts such as typing at a cursor
> presented mid way from the top over existing text and displaying the
> output at the bottom of the screen.
>
> Is this a known phenomenon? Is there something that I am supposed to
> do to get this to work properly or do I just disable UEFI?
>
>


This problem was fixed by updating the BIOS firmware on the host.  I
have since successfully installed the mate desktop, upon which I am
composing this message.  I have a small remaining difficulty
respecting the display.

I am using a HDMI interface with an ASUS VP239 1920x1080 monitor. 
However, FreeBSD / Mate does not recognise this monitor nor can I
discover how to manually set the resolution from inside mate.

System > Preferences > Hardware > Displays

Shows: Monitor Unknown, Resolution 1280 x 1024 (which is the maximum
value in the scroll bar), Refresh rate 0 (and cannot be altered),
Rotation Normal.  Detect monitors has no apparent effect.

What is the procedure to update FreeBSD to handle the monitor that I
have?

Thanks
-- 
***          e-Mail is NOT a SECURE channel          ***
        Do NOT transmit sensitive data via e-Mail
 Do NOT open attachments nor follow links sent by e-Mail

James B. Byrne                mailto:ByrneJB@Harte-Lyne.ca
Harte & Lyne Limited          http://www.harte-lyne.ca
9 Brockley Drive              vox: +1 905 561 1241
Hamilton, Ontario             fax: +1 905 561 0757
Canada  L8E 3C3




Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?c7b24e08cf6766ad306d682e495e9963.squirrel>