Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 27 Apr 2010 16:59:05 +0400
From:      Alex Keda <admin@lissyara.su>
To:        freebsd-current@freebsd.org
Subject:   Re: Something wrong with TCP connections in recent -current
Message-ID:  <4BD6DF99.5090508@lissyara.su>
In-Reply-To: <4BD6DE97.8070906@lissyara.su>
References:  <20100427123506.GA14350@nagual.pp.ru> <4BD6DE97.8070906@lissyara.su>

next in thread | previous in thread | raw e-mail | index | archive | help
27.04.2010 16:54, Alex Keda пишет:
> 27.04.2010 16:35, Andrey Chernov пишет:
>> See subj.
>> They appears to work for ~10 minutes then all hangs deadly. No one TCP
>> service responds, but ICMP and UDP goes normally.
>> The machine is x86 Pentium 4 IPv4-only, IPv6 is turned off in every 
>> place.
>> Last kernel I have that works nice compiled at Mar 19.
>>
>> Ethernet info:
>> fxp0:<Intel 82559 Pro/100 Ethernet>  port 0xc000-0xc03f mem
>> 0xed100000-0xed100fff,0xed000000-0xed0fffff irq 11 at device 11.0 on 
>> pci1
>> miibus0:<MII bus>  on fxp0
>> inphy0:<i82555 10/100 media interface>  PHY 1 on miibus0
>> inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>>
>> This is remote machine, so I don't have console access.
>>
> I too have it bug
> but, time > 2-3 hours.
> lissyara$ ifconfig
> bge0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> 
> metric 0 mtu 1500
> options=c0098<VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,VLAN_HWTSO,LINKSTATE>
> ether 00:1c:c4:98:77:a8
> inet 172.17.4.127 netmask 0xffffff00 broadcast 172.17.4.255
> media: Ethernet autoselect (100baseTX <full-duplex>)
> status: active
> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
> options=3<RXCSUM,TXCSUM>
> inet 127.0.0.1 netmask 0xff000000
> inet6 ::1 prefixlen 128
> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
> nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
> tap0: flags=8902<BROADCAST,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
> options=80000<LINKSTATE>
> ether 00:bd:3c:81:00:00
> bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 
> mtu 1500
> ether 42:16:df:e5:3c:68
> id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
> maxage 20 holdcnt 6 proto rstp maxaddr 100 timeout 1200
> root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
> member: tap0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
> ifmaxaddr 0 port 3 priority 128 path cost 2000000
> member: bge0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
> ifmaxaddr 0 port 1 priority 128 path cost 55
> gif0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> metric 0 mtu 1280
> tunnel inet 172.17.4.127 --> 172.29.200.25
> inet 10.10.20.26 --> 10.10.10.16 netmask 0xffffffff
> options=1<ACCEPT_REV_ETHIP_VER>
> lissyara$
>
> _______________________________________________
> freebsd-current@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to 
> "freebsd-current-unsubscribe@freebsd.org"
>
forget. if I attempt local login to machine, I can type "root", Enter - 
and finish - cursor get to line down and nothing. (root without password)



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4BD6DF99.5090508>