Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 18 Feb 2002 00:37:07 -0600
From:      "Kevin Christmas" <kachristmas@attbi.com>
To:        <freebsd-questions@FreeBSD.ORG>
Subject:   XFree86 Problems
Message-ID:  <000001c1b846$b2f7a480$3701a8c0@kevcomp5>

Next in thread | Raw E-Mail | Index | Archive | Help
This is a multi-part message in MIME format.

------=_NextPart_000_0001_01C1B814.685D3480
Content-Type: multipart/alternative;
	boundary="----=_NextPart_001_0002_01C1B814.685D3480"


------=_NextPart_001_0002_01C1B814.685D3480
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: 7bit

Hello, I am need of some help.  It seems my X server is not initializing
it self properly, and I can't figure out what the problem is.  The main
symptom is that when X starts up, the back ground is black, not grey.
This progresses into GNOME, where I suspect that the background is grey,
it is black.  This makes GNOME unusable.  This all started when I
compiled QT2 libraries from user/ports.  After screwing with the
configuration, I just formatted and started over.  So I didn't install
KDE2, and went with GNOME.  The problem never went away.  I have a
Matrox G200 with 8 megs of ram sitting in a PCI slot on an i810
motherboard.  I have tried building X WITH_MATROX_GXX and with out.
Anyway, here is my XF86Config and make.conf
 
 

------=_NextPart_001_0002_01C1B814.685D3480
Content-Type: text/html;
	charset="us-ascii"
Content-Transfer-Encoding: quoted-printable

<html xmlns:o=3D"urn:schemas-microsoft-com:office:office" =
xmlns:w=3D"urn:schemas-microsoft-com:office:word" =
xmlns=3D"http://www.w3.org/TR/REC-html40">;

<head>
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Dus-ascii">


<meta name=3DProgId content=3DWord.Document>
<meta name=3DGenerator content=3D"Microsoft Word 10">
<meta name=3DOriginator content=3D"Microsoft Word 10">
<link rel=3DFile-List href=3D"cid:filelist.xml@01C1B814.65088B40">
<!--[if gte mso 9]><xml>
 <o:OfficeDocumentSettings>
  <o:DoNotRelyOnCSS/>
 </o:OfficeDocumentSettings>
</xml><![endif]--><!--[if gte mso 9]><xml>
 <w:WordDocument>
  <w:SpellingState>Clean</w:SpellingState>
  <w:GrammarState>Clean</w:GrammarState>
  <w:DocumentKind>DocumentEmail</w:DocumentKind>
  <w:EnvelopeVis/>
  <w:Compatibility>
   <w:BreakWrappedTables/>
   <w:SnapToGridInCell/>
   <w:WrapTextWithPunct/>
   <w:UseAsianBreakRules/>
   <w:UseFELayout/>
  </w:Compatibility>
  <w:BrowserLevel>MicrosoftInternetExplorer4</w:BrowserLevel>
 </w:WordDocument>
</xml><![endif]-->
<style>
<!--
 /* Font Definitions */
 @font-face
	{font-family:SimSun;
	panose-1:2 1 6 0 3 1 1 1 1 1;
	mso-font-alt:\5B8B\4F53;
	mso-font-charset:134;
	mso-generic-font-family:auto;
	mso-font-pitch:variable;
	mso-font-signature:3 135135232 16 0 262145 0;}
@font-face
	{font-family:"\@SimSun";
	panose-1:2 1 6 0 3 1 1 1 1 1;
	mso-font-charset:134;
	mso-generic-font-family:auto;
	mso-font-pitch:variable;
	mso-font-signature:3 135135232 16 0 262145 0;}
 /* Style Definitions */
 p.MsoNormal, li.MsoNormal, div.MsoNormal
	{mso-style-parent:"";
	margin:0in;
	margin-bottom:.0001pt;
	mso-pagination:widow-orphan;
	font-size:12.0pt;
	font-family:"Times New Roman";
	mso-fareast-font-family:SimSun;}
a:link, span.MsoHyperlink
	{color:blue;
	text-decoration:underline;
	text-underline:single;}
a:visited, span.MsoHyperlinkFollowed
	{color:purple;
	text-decoration:underline;
	text-underline:single;}
span.EmailStyle17
	{mso-style-type:personal-compose;
	mso-style-noshow:yes;
	mso-ansi-font-size:10.0pt;
	mso-bidi-font-size:10.0pt;
	font-family:Arial;
	mso-ascii-font-family:Arial;
	mso-hansi-font-family:Arial;
	mso-bidi-font-family:Arial;
	color:windowtext;}
span.SpellE
	{mso-style-name:"";
	mso-spl-e:yes;}
span.GramE
	{mso-style-name:"";
	mso-gram-e:yes;}
@page Section1
	{size:8.5in 11.0in;
	margin:1.0in 1.25in 1.0in 1.25in;
	mso-header-margin:.5in;
	mso-footer-margin:.5in;
	mso-paper-source:0;}
div.Section1
	{page:Section1;}
-->
</style>
<!--[if gte mso 10]>
<style>
 /* Style Definitions */=20
 table.MsoNormalTable
	{mso-style-name:"Table Normal";
	mso-tstyle-rowband-size:0;
	mso-tstyle-colband-size:0;
	mso-style-noshow:yes;
	mso-style-parent:"";
	mso-padding-alt:0in 5.4pt 0in 5.4pt;
	mso-para-margin:0in;
	mso-para-margin-bottom:.0001pt;
	mso-pagination:widow-orphan;
	font-size:10.0pt;
	font-family:"Times New Roman";}
</style>
<![endif]-->
</head>

<body lang=3DEN-US link=3Dblue vlink=3Dpurple =
style=3D'tab-interval:.5in'>

<div class=3DSection1>

<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>Hello, I am need of some help.<span
style=3D'mso-spacerun:yes'>&nbsp; </span>It seems my X server is not =
initializing
it self properly, and I can&#8217;t figure out what the problem is.<span
style=3D'mso-spacerun:yes'>&nbsp; </span>The main symptom is that when X =
starts
up, the back ground is black, not grey. <span
style=3D'mso-spacerun:yes'>&nbsp;</span><span class=3DGramE>This =
progresses</span>
into GNOME, where I suspect that the background is grey, it is =
black.<span
style=3D'mso-spacerun:yes'>&nbsp; </span>This makes GNOME unusable.<span
style=3D'mso-spacerun:yes'>&nbsp; </span>This all started when I =
compiled QT2
libraries from user/ports. <span =
style=3D'mso-spacerun:yes'>&nbsp;</span>After
screwing with the configuration, I just formatted and started over. =
<span
style=3D'mso-spacerun:yes'>&nbsp;</span>So I didn&#8217;t install KDE2, =
and went
with GNOME.<span style=3D'mso-spacerun:yes'>&nbsp; </span>The problem =
never went
away.<span style=3D'mso-spacerun:yes'>&nbsp; </span>I have a <span =
class=3DSpellE>Matrox</span>
G200 with 8 <span class=3DGramE>megs</span> of ram sitting in a PCI slot =
on an
i810 motherboard.<span style=3D'mso-spacerun:yes'>&nbsp; </span>I have =
tried building
X WITH_MATROX_GXX and with out.<span style=3D'mso-spacerun:yes'>&nbsp; =
</span>Anyway,
here is my XF86Config and <span =
class=3DSpellE>make.conf</span><o:p></o:p></span></font></p>

<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'><o:p>&nbsp;</o:p></span></font></p>

<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'><o:p>&nbsp;</o:p></span></font></p>

</div>

</body>

</html>

------=_NextPart_001_0002_01C1B814.685D3480--

------=_NextPart_000_0001_01C1B814.685D3480
Content-Type: application/octet-stream;
	name="XF86Config"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
	filename="XF86Config"

# File generated by xf86config.=0A=
=0A=
#=0A=
# Copyright (c) 1999 by The XFree86 Project, Inc.=0A=
#=0A=
# Permission is hereby granted, free of charge, to any person obtaining a=0A=
# copy of this software and associated documentation files (the =
"Software"),=0A=
# to deal in the Software without restriction, including without =
limitation=0A=
# the rights to use, copy, modify, merge, publish, distribute, =
sublicense,=0A=
# and/or sell copies of the Software, and to permit persons to whom the=0A=
# Software is furnished to do so, subject to the following conditions:=0A=
# =0A=
# The above copyright notice and this permission notice shall be =
included in=0A=
# all copies or substantial portions of the Software.=0A=
# =0A=
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, =
EXPRESS OR=0A=
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF =
MERCHANTABILITY,=0A=
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT =
SHALL=0A=
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER =
LIABILITY,=0A=
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT =
OF=0A=
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE=0A=
# SOFTWARE.=0A=
# =0A=
# Except as contained in this notice, the name of the XFree86 Project =
shall=0A=
# not be used in advertising or otherwise to promote the sale, use or =
other=0A=
# dealings in this Software without prior written authorization from the=0A=
# XFree86 Project.=0A=
#=0A=
=0A=
# **********************************************************************=0A=
# Refer to the XF86Config(4/5) man page for details about the format of =0A=
# this file.=0A=
# **********************************************************************=0A=
=0A=
# **********************************************************************=0A=
# Module section -- this  section  is used to specify=0A=
# which dynamically loadable modules to load.=0A=
# **********************************************************************=0A=
#=0A=
Section "Module"=0A=
=0A=
# This loads the DBE extension module.=0A=
=0A=
    Load        "dbe"  	# Double buffer extension=0A=
=0A=
# This loads the miscellaneous extensions module, and disables=0A=
# initialisation of the XFree86-DGA extension within that module.=0A=
    SubSection  "extmod"=0A=
      Option    "omit xfree86-dga"   # don't initialise the DGA extension=0A=
    EndSubSection=0A=
=0A=
# This loads the Type1 and FreeType font modules=0A=
    Load        "type1"=0A=
    Load        "freetype"=0A=
=0A=
# This loads the GLX module=0A=
#    Load       "glx"=0A=
=0A=
EndSection=0A=
=0A=
# **********************************************************************=0A=
# Files section.  This allows default font and rgb paths to be set=0A=
# **********************************************************************=0A=
=0A=
Section "Files"=0A=
=0A=
# The location of the RGB database.  Note, this is the name of the=0A=
# file minus the extension (like ".txt" or ".db").  There is normally=0A=
# no need to change the default.=0A=
=0A=
    RgbPath	"/usr/X11R6/lib/X11/rgb"=0A=
=0A=
# Multiple FontPath entries are allowed (which are concatenated =
together),=0A=
# as well as specifying multiple comma-separated entries in one FontPath=0A=
# command (or a combination of both methods)=0A=
# =0A=
# If you don't have a floating point coprocessor and emacs, Mosaic or =
other=0A=
# programs take long to start up, try moving the Type1 and Speedo =
directory=0A=
# to the end of this list (or comment them out).=0A=
# =0A=
=0A=
    FontPath   "/usr/X11R6/lib/X11/fonts/local/"=0A=
    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"=0A=
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"=0A=
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"=0A=
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"=0A=
    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"=0A=
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"=0A=
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"=0A=
=0A=
# The module search path.  The default path is shown here.=0A=
=0A=
#    ModulePath "/usr/X11R6/lib/modules"=0A=
=0A=
EndSection=0A=
=0A=
# **********************************************************************=0A=
# Server flags section.=0A=
# **********************************************************************=0A=
=0A=
Section "ServerFlags"=0A=
=0A=
# Uncomment this to cause a core dump at the spot where a signal is =0A=
# received.  This may leave the console in an unusable state, but may=0A=
# provide a better stack trace in the core dump to aid in debugging=0A=
=0A=
#    Option "NoTrapSignals"=0A=
=0A=
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence=0A=
# This allows clients to receive this key event.=0A=
=0A=
#    Option "DontZap"=0A=
=0A=
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching=0A=
# sequences.  This allows clients to receive these key events.=0A=
=0A=
#    Option "Dont Zoom"=0A=
=0A=
# Uncomment this to disable tuning with the xvidtune client. With=0A=
# it the client can still run and fetch card and monitor attributes,=0A=
# but it will not be allowed to change them. If it tries it will=0A=
# receive a protocol error.=0A=
=0A=
#    Option "DisableVidModeExtension"=0A=
=0A=
# Uncomment this to enable the use of a non-local xvidtune client. =0A=
=0A=
#    Option "AllowNonLocalXvidtune"=0A=
=0A=
# Uncomment this to disable dynamically modifying the input device=0A=
# (mouse and keyboard) settings. =0A=
=0A=
#    Option "DisableModInDev"=0A=
=0A=
# Uncomment this to enable the use of a non-local client to=0A=
# change the keyboard or mouse settings (currently only xset).=0A=
=0A=
#    Option "AllowNonLocalModInDev"=0A=
=0A=
EndSection=0A=
=0A=
# **********************************************************************=0A=
# Input devices=0A=
# **********************************************************************=0A=
=0A=
# **********************************************************************=0A=
# Core keyboard's InputDevice section=0A=
# **********************************************************************=0A=
=0A=
Section "InputDevice"=0A=
=0A=
    Identifier	"Keyboard1"=0A=
    Driver	"Keyboard"=0A=
# For most OSs the protocol can be omitted (it defaults to "Standard").=0A=
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),=0A=
# uncomment the following line.=0A=
=0A=
#    Option     "Protocol"      "Xqueue"=0A=
=0A=
    Option "AutoRepeat" "500 30"=0A=
=0A=
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))=0A=
#    Option	"Xleds"      "1 2 3"=0A=
=0A=
#    Option "LeftAlt"     "Meta"=0A=
#    Option "RightAlt"    "ModeShift"=0A=
=0A=
# To customise the XKB settings to suit your keyboard, modify the=0A=
# lines below (which are the defaults).  For example, for a non-U.S.=0A=
# keyboard, you will probably want to use:=0A=
#    Option "XkbModel"    "pc102"=0A=
# If you have a US Microsoft Natural keyboard, you can use:=0A=
#    Option "XkbModel"    "microsoft"=0A=
#=0A=
# Then to change the language, change the Layout setting.=0A=
# For example, a german layout can be obtained with:=0A=
#    Option "XkbLayout"   "de"=0A=
# or:=0A=
#    Option "XkbLayout"   "de"=0A=
#    Option "XkbVariant"  "nodeadkeys"=0A=
#=0A=
# If you'd like to switch the positions of your capslock and=0A=
# control keys, use:=0A=
#    Option "XkbOptions"  "ctrl:swapcaps"=0A=
=0A=
# These are the default XKB settings for XFree86=0A=
#    Option "XkbRules"    "xfree86"=0A=
#    Option "XkbModel"    "pc101"=0A=
#    Option "XkbLayout"   "us"=0A=
#    Option "XkbVariant"  ""=0A=
#    Option "XkbOptions"  ""=0A=
=0A=
#    Option "XkbDisable"=0A=
=0A=
    Option "XkbRules"	"xfree86"=0A=
    Option "XkbModel"	"pc104"=0A=
    Option "XkbLayout"	"us_intl"=0A=
=0A=
EndSection=0A=
=0A=
=0A=
# **********************************************************************=0A=
# Core Pointer's InputDevice section=0A=
# **********************************************************************=0A=
=0A=
Section "InputDevice"=0A=
=0A=
# Identifier and driver=0A=
=0A=
    Identifier	"Mouse1"=0A=
    Driver	"mouse"=0A=
    Option "Protocol"    "auto"=0A=
    Option "Device"      "/dev/sysmouse"=0A=
=0A=
# When using XQUEUE, comment out the above two lines, and uncomment=0A=
# the following line.=0A=
=0A=
#    Option "Protocol"	"Xqueue"=0A=
=0A=
# Baudrate and SampleRate are only for some Logitech mice. In=0A=
# almost every case these lines should be omitted.=0A=
=0A=
#    Option "BaudRate"	"9600"=0A=
#    Option "SampleRate"	"150"=0A=
=0A=
# Emulate3Buttons is an option for 2-button Microsoft mice=0A=
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)=0A=
=0A=
#    Option "Emulate3Buttons"=0A=
#    Option "Emulate3Timeout"    "50"=0A=
=0A=
# ChordMiddle is an option for some 3-button Logitech mice=0A=
=0A=
#    Option "ChordMiddle"=0A=
=0A=
EndSection=0A=
=0A=
=0A=
# **********************************************************************=0A=
# Other input device sections =0A=
# this is optional and is required only if you=0A=
# are using extended input devices.  This is for example only.  Refer=0A=
# to the XF86Config man page for a description of the options.=0A=
# **********************************************************************=0A=
#=0A=
# Section "InputDevice" =0A=
#    Identifier  "Mouse2"=0A=
#    Driver      "mouse"=0A=
#    Option      "Protocol"      "MouseMan"=0A=
#    Option      "Device"        "/dev/mouse2"=0A=
# EndSection=0A=
#=0A=
# Section "InputDevice"=0A=
#    Identifier "spaceball"=0A=
#    Driver     "magellan"=0A=
#    Option     "Device"        "/dev/cua0"=0A=
# EndSection=0A=
#=0A=
# Section "InputDevice"=0A=
#    Identifier "spaceball2"=0A=
#    Driver     "spaceorb"=0A=
#    Option     "Device"        "/dev/cua0"=0A=
# EndSection=0A=
#=0A=
# Section "InputDevice"=0A=
#    Identifier "touchscreen0"=0A=
#    Driver     "microtouch"=0A=
#    Option     "Device"        "/dev/ttyS0"=0A=
#    Option     "MinX"          "1412"=0A=
#    Option     "MaxX"          "15184"=0A=
#    Option     "MinY"          "15372"=0A=
#    Option     "MaxY"          "1230"=0A=
#    Option     "ScreenNumber"  "0"=0A=
#    Option     "ReportingMode" "Scaled"=0A=
#    Option     "ButtonNumber"  "1"=0A=
#    Option     "SendCoreEvents"=0A=
# EndSection=0A=
#=0A=
# Section "InputDevice"=0A=
#    Identifier "touchscreen1"=0A=
#    Driver     "elo2300"=0A=
#    Option     "Device"        "/dev/ttyS0"=0A=
#    Option     "MinX"          "231"=0A=
#    Option     "MaxX"          "3868"=0A=
#    Option     "MinY"          "3858"=0A=
#    Option     "MaxY"          "272"=0A=
#    Option     "ScreenNumber"  "0"=0A=
#    Option     "ReportingMode" "Scaled"=0A=
#    Option     "ButtonThreshold"       "17"=0A=
#    Option     "ButtonNumber"  "1"=0A=
#    Option     "SendCoreEvents"=0A=
# EndSection=0A=
=0A=
# **********************************************************************=0A=
# Monitor section=0A=
# **********************************************************************=0A=
=0A=
# Any number of monitor sections may be present=0A=
=0A=
Section "Monitor"=0A=
=0A=
    Identifier  "955df"=0A=
=0A=
# HorizSync is in kHz unless units are specified.=0A=
# HorizSync may be a comma separated list of discrete values, or a=0A=
# comma separated list of ranges of values.=0A=
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S=0A=
# USER MANUAL FOR THE CORRECT NUMBERS.=0A=
=0A=
    HorizSync   30-85=0A=
=0A=
#    HorizSync	30-64         # multisync=0A=
#    HorizSync	31.5, 35.2    # multiple fixed sync frequencies=0A=
#    HorizSync	15-25, 30-50  # multiple ranges of sync frequencies=0A=
=0A=
# VertRefresh is in Hz unless units are specified.=0A=
# VertRefresh may be a comma separated list of discrete values, or a=0A=
# comma separated list of ranges of values.=0A=
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S=0A=
# USER MANUAL FOR THE CORRECT NUMBERS.=0A=
=0A=
    VertRefresh 50-160=0A=
=0A=
EndSection=0A=
=0A=
=0A=
# **********************************************************************=0A=
# Graphics device section=0A=
# **********************************************************************=0A=
=0A=
# Any number of graphics device sections may be present=0A=
=0A=
# Standard VGA Device:=0A=
=0A=
Section "Device"=0A=
    Identifier	"Standard VGA"=0A=
    VendorName	"Unknown"=0A=
    BoardName	"Unknown"=0A=
=0A=
# The chipset line is optional in most cases.  It can be used to override=0A=
# the driver's chipset detection, and should not normally be specified.=0A=
=0A=
#    Chipset	"generic"=0A=
=0A=
# The Driver line must be present.  When using run-time loadable driver=0A=
# modules, this line instructs the server to load the specified driver=0A=
# module.  Even when not using loadable driver modules, this line=0A=
# indicates which driver should interpret the information in this =
section.=0A=
=0A=
    Driver     "vga"=0A=
# The BusID line is used to specify which of possibly multiple devices=0A=
# this section is intended for.  When this line isn't present, a device=0A=
# section can only match up with the primary video device.  For PCI=0A=
# devices a line like the following could be used.  This line should not=0A=
# normally be included unless there is more than one video device=0A=
# intalled.=0A=
=0A=
#    BusID      "PCI:0:10:0"=0A=
=0A=
#    VideoRam	256=0A=
=0A=
#    Clocks	25.2 28.3=0A=
=0A=
EndSection=0A=
=0A=
# Device configured by xf86config:=0A=
=0A=
Section "Device"=0A=
    Identifier  "my matrox"=0A=
    Driver      "mga"=0A=
    #VideoRam    8192=0A=
VideoRam 8192=0A=
    # Insert Clocks lines here if appropriate=0A=
EndSection=0A=
=0A=
=0A=
# **********************************************************************=0A=
# Screen sections=0A=
# **********************************************************************=0A=
=0A=
# Any number of screen sections may be present.  Each describes=0A=
# the configuration of a single screen.  A single specific screen section=0A=
# may be specified from the X server command line with the "-screen"=0A=
# option.=0A=
Section "Screen"=0A=
    Identifier  "Screen 1"=0A=
    Device      "my matrox"=0A=
    Monitor     "955df"=0A=
    DefaultDepth 16=0A=
=0A=
    Subsection "Display"=0A=
        Depth       8=0A=
        Modes       "640x480" "800x600" "1024x768" "1280x1024"=0A=
        ViewPort    0 0=0A=
    EndSubsection=0A=
    Subsection "Display"=0A=
        Depth       16=0A=
        Modes       "1024x768"=0A=
        ViewPort    0 0=0A=
    EndSubsection=0A=
    Subsection "Display"=0A=
        Depth       24=0A=
        Modes       "1280x1024"=0A=
        ViewPort    0 0=0A=
    EndSubsection=0A=
EndSection=0A=
=0A=
# **********************************************************************=0A=
# ServerLayout sections.=0A=
# **********************************************************************=0A=
=0A=
# Any number of ServerLayout sections may be present.  Each describes=0A=
# the way multiple screens are organised.  A specific ServerLayout=0A=
# section may be specified from the X server command line with the=0A=
# "-layout" option.  In the absence of this, the first section is used.=0A=
# When now ServerLayout section is present, the first Screen section=0A=
# is used alone.=0A=
=0A=
Section "ServerLayout"=0A=
=0A=
# The Identifier line must be present=0A=
    Identifier  "Simple Layout"=0A=
=0A=
# Each Screen line specifies a Screen section name, and optionally=0A=
# the relative position of other screens.  The four names after=0A=
# primary screen name are the screens to the top, bottom, left and right=0A=
# of the primary screen.  In this example, screen 2 is located to the=0A=
# right of screen 1.=0A=
=0A=
    Screen "Screen 1"=0A=
=0A=
# Each InputDevice line specifies an InputDevice section name and=0A=
# optionally some options to specify the way the device is to be=0A=
# used.  Those options include "CorePointer", "CoreKeyboard" and=0A=
# "SendCoreEvents".=0A=
=0A=
    InputDevice "Mouse1" "CorePointer"=0A=
    InputDevice "Keyboard1" "CoreKeyboard"=0A=
=0A=
EndSection=0A=
=0A=

------=_NextPart_000_0001_01C1B814.685D3480
Content-Type: application/octet-stream;
	name="make.conf"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
	filename="make.conf"

CPUTYPE=3Dk7=0A=
XFREE86_VERSION=3D4=0A=
USA_RESIDENT=3DYES=0A=

------=_NextPart_000_0001_01C1B814.685D3480--



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?000001c1b846$b2f7a480$3701a8c0>