Date: Wed, 18 Mar 2009 22:12:28 +0100 From: =?ISO-8859-1?Q?Per_Otterstr=F6m?= <per.otterstrom@gmail.com> To: freebsd-stable@freebsd.org Subject: Gigabit cardbus re nic fails to attach Message-ID: <ac3c3950903181412t40488e7fue27702dee5758024@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Hi all.
I'm running 7.1-RELEASE.
When I plug in my D-Link DGE-660TD gigabit cardbus adapter I get:
re0: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet> port
0x4000-0x40ff mem 0xd0201000-0xd02011ff irq 11 at device 0.0 on cardbus1
re0: Chip rev. 0x10000000
re0: MAC rev. 0x00000000
re0: PHY write failed
re0: PHY write failed
re0: PHY read failed
re0: MII without any phy!
device_attach: re0 attach returned 6
Relevant part from pciconf -lv:
re0@pci0:6:0:0: class=0x020000 card=0x43011186 chip=0x816910ec rev=0x10
hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'RTL8110SB Single-Chip Gigabit LOM Ethernet Controller'
class = network
subclass = ethernet
I've seen several patches for similar problems provided by Pyun YongHyeon,
but I don't think any one of them are applicable in my case.
Any advice appreciated.
regards, Pelle
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?ac3c3950903181412t40488e7fue27702dee5758024>