Date: Fri, 10 Jan 2014 21:45:59 -0800 From: Adrian Chadd <adrian@freebsd.org> To: Erich Dollansky <erichsfreebsdlist@alogt.com> Cc: Kevin Oberman <rkoberman@gmail.com>, freebsd-wireless@freebsd.org Subject: Re: IWN performance very bad with 10.0-RC5 Message-ID: <CAJ-Vmomo=0=6Yc6hQ02uBYfuyYibnYdsCMVOKm91Kxya2LOKwQ@mail.gmail.com> In-Reply-To: <20140111133610.313a4bca@X220.alogt.com> References: <CAN6yY1skA-x=-JLf%2BWQ0GJdSmHugqmSX2Um2zWkKB_cULxwsSw@mail.gmail.com> <20140111132338.7a7fc14c@X220.alogt.com> <CAJ-VmokkmAuLCJo01yjMGT-is3ET-pigY6BHhk0pfROQ=UMJcg@mail.gmail.com> <20140111133610.313a4bca@X220.alogt.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, Please help dig up which change broke it. Even just test out the head iwn code from 6 months ago. Adrian On Jan 11, 2014 12:36 AM, "Erich Dollansky" <erichsfreebsdlist@alogt.com> wrote: > Hi, > > On Fri, 10 Jan 2014 21:24:46 -0800 > Adrian Chadd <adrian@freebsd.org> wrote: > > > diff the drivers between 9.x and 10.x; not much has changed. > > > > Try running the 9.x sys/dev/iwn in 10.x, and make sure you use the 9.x > > firmware. see if that fixes it. > > > it was working on 10 until at least summer/fall of last year. I can't > recall the precise date as I moved to cable by change. As it always > worked outside, I never bothered to test. > > I will try to get the sources for 9. > > Erich > > > > -a > > > > > > On 10 January 2014 21:23, Erich Dollansky <erich@alogt.com> wrote: > > > Hi, > > > > > > On Fri, 10 Jan 2014 21:02:36 -0800 > > > Kevin Oberman <rkoberman@gmail.com> wrote: > > > > > >> Since upgrading my system to 10.0-RC# and now 10.0-RC5, by wireless > > >> performance has severely degraded. > > >> > > >> iwn0@pci0:3:0:0: class=0x028000 card=0x13118086 chip=0x00858086 > > >> rev=0x34 hdr=0x00 > > >> vendor = 'Intel Corporation' > > >> device = 'Centrino Advanced-N 6205 [Taylor Peak]' > > >> class = network > > >> > > > it seems that I have the same hardware and the same problem. While a > > > device using run can connect to my access point without problems, > > > iwn is not able to connect anymore. But, it connected earlier > > > without any problems to other access points. iwn never hangs in my > > > case, it is simply not able to connect. > > > > > > Successfully initialized wpa_supplicant > > > wlan0: Trying to associate with 90:61:0c:13:36:fe (SSID='Sumarni' > > > freq=2437 MHz) wlan0: Associated with 90:61:0c:13:36:fe > > > wlan0: CTRL-EVENT-DISCONNECTED bssid=90:61:0c:13:36:fe reason=0 > > > wlan0: WPA: 4-Way Handshake failed - pre-shared key may be incorrect > > > wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Some Name" > > > auth_failures=1 duration=10 > > > > > > With the same configuration, run0 connects without problems. > > > > > > How could I help to fix this problem? > > > > > > Erich > > > _______________________________________________ > > > freebsd-wireless@freebsd.org mailing list > > > http://lists.freebsd.org/mailman/listinfo/freebsd-wireless > > > To unsubscribe, send any mail to > > > "freebsd-wireless-unsubscribe@freebsd.org" > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-Vmomo=0=6Yc6hQ02uBYfuyYibnYdsCMVOKm91Kxya2LOKwQ>