Date: Thu, 13 May 1999 06:30:03 -0700 (PDT) From: "Justin T. Gibbs" <gibbs@plutotech.com> To: freebsd-bugs@FreeBSD.org Subject: Re: i386/11681: Adaptec 2940 UW SCSI Controller BIOS 1.34.3 wont work under 3.1R Message-ID: <199905131330.GAA62910@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR i386/11681; it has been noted by GNATS. From: "Justin T. Gibbs" <gibbs@plutotech.com> To: dnsadmin@aeonflux.ent Cc: freebsd-gnats-submit@FreeBSD.ORG Subject: Re: i386/11681: Adaptec 2940 UW SCSI Controller BIOS 1.34.3 wont work under 3.1R Date: Thu, 13 May 1999 07:13:34 -0600 >We run a variety of PC's with the AHA 2940UW controller. ALL systems >work perfectly as long as we don't use a BIOS revision higher than >1.26. You'll have to be a bit more specific as I have several 2940UW controllers with BIOS revisions in the 30's and they all work fine. My guess is that you are encountering an interration between a specific rev of the aic7880 and the chipset on your motherboard. A dmesg from a boot -v (or possible a boot -v sent to a serial console so you can capture it all) will give me a clue about your problem, but I may only be able to help you out if you can send me a bare bones system (MB, controller, case, powersupply) for a day or two so I can analyze the problem with a PCI bus analyzer. -- Justin To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199905131330.GAA62910>