Date: Thu, 08 Apr 1999 18:26:38 +0200 From: Johan =?iso-8859-1?Q?M=E5rtensson?= <balrog@swipnet.se> To: freebsd-questions@FreeBSD.ORG Subject: Re: SB16 problems Message-ID: <370CD8BE.A943A6EE@swipnet.se> References: <XFMail.990408114157.patrick@cre8tivegroup.com> <370CD620.975B542C@swipnet.se>
next in thread | previous in thread | raw e-mail | index | archive | help
Johan Mårtensson wrote: > Patrick Gardella wrote: > > > On 08-Apr-99 Johan Mårtensson wrote: > > >> I've tried too configure my kernel to make use of my sb16 (not pnp), > > >> but I can't seem to get it to work. > > >> > > >> I'll send along my /usr/src/sys/i386/conf/ANGRENOST file... > > >> > > >> ps. I've done /dev/MAKEDEV snd0 , so that's not the problem > > > > What does dmesg show (related to sb0)? > > Mine is: > > > > sb0 at 0x220 irq 5 drq 1 on isa > > snd0: <SoundBlaster 16 4.13> > > sbxvi0 at drq 5 on isa > > snd0: <SoundBlaster 16 4.13> > > sbmidi0 at 0x330 on isa > > snd0: <SoundBlaster MPU-401> > > opl0 at 0x388 on isa > > snd0: <Yamaha OPL3 FM> > > > > <SNIP> > > > > >> controller snd0 > > >> device sb0 at isa? port 0x220 irq 7 conflicts drq 1 vector > > >> sbintr > > >> device sbxvi0 at isa? drq 5 > > >> device sbmidi0 at isa? port 0x330 > > > > You sure it's irq 7 on your soundcard? What's it configured for? My > > card uses irq 5. That would do it. See if dmesg says something like > > sb0 not found. Does "cat /dev/sndstat" return anything? > > > > Also, you could try pcm0 instead of the sb0 code. > > > > Patrick > > > > --- > > Patrick S. Gardella Director of Web Development > > The Creative Group 1-800-804-0783 ext 29 606-858-8029 (fax) > > http://www.cre8tivegroup.com PGP Key ID 0xEE2D47A9 > > I've tried irq 5 no difference. When I boot it says sbmidi0 not found at > 0x330, I think that in Linux I put this to 0x0 but if i do that here > (I've tried) then it isn't loaded because the kernel tells me that it is > in conflict with sbxvi0! By the way the sbmidi0 not found at 0x330 came > when I used irq 7 as well. > > # cat /dev/sndstat > cat: /dev/sndstat: No such file or directory. > > what is the line for pcm? (device sb0 at isa? port 0x220 irq 5 > conflicts drq 1 vector), my guide to FreeBSD is "The Complete FreeBSD" and > it covers every driver but pcm (it mentions it but there is no line for > it). To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?370CD8BE.A943A6EE>