Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 22 Aug 2016 05:38:44 +0000 (UTC)
From:      Sepherosa Ziehau <sephe@FreeBSD.org>
To:        src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-releng@freebsd.org
Subject:   svn commit: r304586 - releng/11.0/sys/dev/hyperv/storvsc
Message-ID:  <201608220538.u7M5ciNp065439@repo.freebsd.org>

next in thread | raw e-mail | index | archive | help
Author: sephe
Date: Mon Aug 22 05:38:44 2016
New Revision: 304586
URL: https://svnweb.freebsd.org/changeset/base/304586

Log:
  MFC 304251
  
      hyperv/storvsc: Deliver CAM_SEL_TIMEOUT upon SRB status error.
  
      SRB status is set to 0x20 by the hypervisor, if the specified LUN is
      unaccessible, and even worse the INQUIRY response will not be set by
      the hypervisor at all under this situation.  Additionally, SRB status
      is 0x20 too, for TUR on an unaccessible LUN.
  
      Deliver CAM_SEL_TIMEOUT to CAM upon SRB status errors as suggested by
      Scott Long, other values seems improper.
  
      This commit fixes the Hyper-V disk hotplug support.
  
      Submitted by:   Hongjiang Zhang <honzhan microsoft com>
      Sponsored by:   Microsoft
      Differential Revision:  https://reviews.freebsd.org/D7521
  
  Approved by:	re (kib)

Modified:
  releng/11.0/sys/dev/hyperv/storvsc/hv_storvsc_drv_freebsd.c
  releng/11.0/sys/dev/hyperv/storvsc/hv_vstorage.h
Directory Properties:
  releng/11.0/   (props changed)

Modified: releng/11.0/sys/dev/hyperv/storvsc/hv_storvsc_drv_freebsd.c
==============================================================================
--- releng/11.0/sys/dev/hyperv/storvsc/hv_storvsc_drv_freebsd.c	Mon Aug 22 03:48:39 2016	(r304585)
+++ releng/11.0/sys/dev/hyperv/storvsc/hv_storvsc_drv_freebsd.c	Mon Aug 22 05:38:44 2016	(r304586)
@@ -810,6 +810,7 @@ hv_storvsc_on_iocompletion(struct storvs
 	 * because the fields will be used later in storvsc_io_done().
 	 */
 	request->vstor_packet.u.vm_srb.scsi_status = vm_srb->scsi_status;
+	request->vstor_packet.u.vm_srb.srb_status = vm_srb->srb_status;
 	request->vstor_packet.u.vm_srb.transfer_len = vm_srb->transfer_len;
 
 	if (((vm_srb->scsi_status & 0xFF) == SCSI_STATUS_CHECK_COND) &&
@@ -1945,28 +1946,6 @@ create_storvsc_request(union ccb *ccb, s
 	return(0);
 }
 
-/*
- * SCSI Inquiry checks qualifier and type.
- * If qualifier is 011b, means the device server is not capable
- * of supporting a peripheral device on this logical unit, and
- * the type should be set to 1Fh.
- * 
- * Return 1 if it is valid, 0 otherwise.
- */
-static inline int
-is_inquiry_valid(const struct scsi_inquiry_data *inq_data)
-{
-	uint8_t type;
-	if (SID_QUAL(inq_data) != SID_QUAL_LU_CONNECTED) {
-		return (0);
-	}
-	type = SID_TYPE(inq_data);
-	if (type == T_NODEVICE) {
-		return (0);
-	}
-	return (1);
-}
-
 /**
  * @brief completion function before returning to CAM
  *
@@ -1985,7 +1964,6 @@ storvsc_io_done(struct hv_storvsc_reques
 	struct vmscsi_req *vm_srb = &reqp->vstor_packet.u.vm_srb;
 	bus_dma_segment_t *ori_sglist = NULL;
 	int ori_sg_count = 0;
-
 	/* destroy bounce buffer if it is used */
 	if (reqp->bounce_sgl_count) {
 		ori_sglist = (bus_dma_segment_t *)ccb->csio.data_ptr;
@@ -2040,88 +2018,71 @@ storvsc_io_done(struct hv_storvsc_reques
 	ccb->ccb_h.status &= ~CAM_STATUS_MASK;
 	if (vm_srb->scsi_status == SCSI_STATUS_OK) {
 		const struct scsi_generic *cmd;
-		/*
-		 * Check whether the data for INQUIRY cmd is valid or
-		 * not.  Windows 10 and Windows 2016 send all zero
-		 * inquiry data to VM even for unpopulated slots.
-		 */
+
+		if (vm_srb->srb_status != SRB_STATUS_SUCCESS) {
+			if (vm_srb->srb_status == SRB_STATUS_INVALID_LUN) {
+				xpt_print(ccb->ccb_h.path, "invalid LUN %d\n",
+				    vm_srb->lun);
+			} else {
+				xpt_print(ccb->ccb_h.path, "Unknown SRB flag: %d\n",
+				    vm_srb->srb_status);
+			}
+			/*
+			 * If there are errors, for example, invalid LUN,
+			 * host will inform VM through SRB status.
+			 */
+			ccb->ccb_h.status |= CAM_SEL_TIMEOUT;
+		} else {
+			ccb->ccb_h.status |= CAM_REQ_CMP;
+		}
+
 		cmd = (const struct scsi_generic *)
 		    ((ccb->ccb_h.flags & CAM_CDB_POINTER) ?
 		     csio->cdb_io.cdb_ptr : csio->cdb_io.cdb_bytes);
 		if (cmd->opcode == INQUIRY) {
-		    /*
-		     * The host of Windows 10 or 2016 server will response
-		     * the inquiry request with invalid data for unexisted device:
-			[0x7f 0x0 0x5 0x2 0x1f ... ]
-		     * But on windows 2012 R2, the response is:
-			[0x7f 0x0 0x0 0x0 0x0 ]
-		     * That is why here wants to validate the inquiry response.
-		     * The validation will skip the INQUIRY whose response is short,
-		     * which is less than SHORT_INQUIRY_LENGTH (36).
-		     *
-		     * For more information about INQUIRY, please refer to:
-		     *  ftp://ftp.avc-pioneer.com/Mtfuji_7/Proposal/Jun09/INQUIRY.pdf
-		     */
-		    struct scsi_inquiry_data *inq_data =
-			(struct scsi_inquiry_data *)csio->data_ptr;
-		    uint8_t* resp_buf = (uint8_t*)csio->data_ptr;
-		    /* Get the buffer length reported by host */
-		    int resp_xfer_len = vm_srb->transfer_len;
-		    /* Get the available buffer length */
-		    int resp_buf_len = resp_xfer_len >= 5 ? resp_buf[4] + 5 : 0;
-		    int data_len = (resp_buf_len < resp_xfer_len) ? resp_buf_len : resp_xfer_len;
-		    if (data_len < SHORT_INQUIRY_LENGTH) {
-			ccb->ccb_h.status |= CAM_REQ_CMP;
-			if (bootverbose && data_len >= 5) {
-				mtx_lock(&sc->hs_lock);
-				xpt_print(ccb->ccb_h.path,
-				    "storvsc skips the validation for short inquiry (%d)"
-				    " [%x %x %x %x %x]\n",
-				    data_len,resp_buf[0],resp_buf[1],resp_buf[2],
-				    resp_buf[3],resp_buf[4]);
-				mtx_unlock(&sc->hs_lock);
-			}
-		    } else if (is_inquiry_valid(inq_data) == 0) {
-			ccb->ccb_h.status |= CAM_DEV_NOT_THERE;
+			struct scsi_inquiry_data *inq_data =
+			    (struct scsi_inquiry_data *)csio->data_ptr;
+			uint8_t *resp_buf = (uint8_t *)csio->data_ptr;
+			int resp_xfer_len, resp_buf_len, data_len;
+
+			/* Get the buffer length reported by host */
+			resp_xfer_len = vm_srb->transfer_len;
+			/* Get the available buffer length */
+			resp_buf_len = resp_xfer_len >= 5 ? resp_buf[4] + 5 : 0;
+			data_len = (resp_buf_len < resp_xfer_len) ?
+			    resp_buf_len : resp_xfer_len;
+
 			if (bootverbose && data_len >= 5) {
-				mtx_lock(&sc->hs_lock);
-				xpt_print(ccb->ccb_h.path,
-				    "storvsc uninstalled invalid device"
-				    " [%x %x %x %x %x]\n",
-				resp_buf[0],resp_buf[1],resp_buf[2],resp_buf[3],resp_buf[4]);
-				mtx_unlock(&sc->hs_lock);
+				xpt_print(ccb->ccb_h.path, "storvsc inquiry "
+				    "(%d) [%x %x %x %x %x ... ]\n", data_len,
+				    resp_buf[0], resp_buf[1], resp_buf[2],
+				    resp_buf[3], resp_buf[4]);
 			}
-		    } else {
-			char vendor[16];
-			cam_strvis(vendor, inq_data->vendor, sizeof(inq_data->vendor),
-				sizeof(vendor));
-			/**
-			 * XXX: upgrade SPC2 to SPC3 if host is WIN8 or WIN2012 R2
-			 * in order to support UNMAP feature
-			 */
-			if (!strncmp(vendor,"Msft",4) &&
-			     SID_ANSI_REV(inq_data) == SCSI_REV_SPC2 &&
-			     (vmstor_proto_version == VMSTOR_PROTOCOL_VERSION_WIN8_1 ||
-				vmstor_proto_version== VMSTOR_PROTOCOL_VERSION_WIN8)) {
-				inq_data->version = SCSI_REV_SPC3;
-				if (bootverbose) {
-					mtx_lock(&sc->hs_lock);
-					xpt_print(ccb->ccb_h.path,
-						"storvsc upgrades SPC2 to SPC3\n");
-					mtx_unlock(&sc->hs_lock);
+			if (vm_srb->srb_status == SRB_STATUS_SUCCESS &&
+			    data_len > SHORT_INQUIRY_LENGTH) {
+				char vendor[16];
+
+				cam_strvis(vendor, inq_data->vendor,
+				    sizeof(inq_data->vendor), sizeof(vendor));
+
+				/*
+				 * XXX: Upgrade SPC2 to SPC3 if host is WIN8 or
+				 * WIN2012 R2 in order to support UNMAP feature.
+				 */
+				if (!strncmp(vendor, "Msft", 4) &&
+				    SID_ANSI_REV(inq_data) == SCSI_REV_SPC2 &&
+				    (vmstor_proto_version ==
+				     VMSTOR_PROTOCOL_VERSION_WIN8_1 ||
+				     vmstor_proto_version ==
+				     VMSTOR_PROTOCOL_VERSION_WIN8)) {
+					inq_data->version = SCSI_REV_SPC3;
+					if (bootverbose) {
+						xpt_print(ccb->ccb_h.path,
+						    "storvsc upgrades "
+						    "SPC2 to SPC3\n");
+					}
 				}
 			}
-			ccb->ccb_h.status |= CAM_REQ_CMP;
-			if (bootverbose) {
-				mtx_lock(&sc->hs_lock);
-				xpt_print(ccb->ccb_h.path,
-				    "storvsc has passed inquiry response (%d) validation\n",
-				    data_len);
-				mtx_unlock(&sc->hs_lock);
-			}
-		    }
-		} else {
-			ccb->ccb_h.status |= CAM_REQ_CMP;
 		}
 	} else {
 		mtx_lock(&sc->hs_lock);

Modified: releng/11.0/sys/dev/hyperv/storvsc/hv_vstorage.h
==============================================================================
--- releng/11.0/sys/dev/hyperv/storvsc/hv_vstorage.h	Mon Aug 22 03:48:39 2016	(r304585)
+++ releng/11.0/sys/dev/hyperv/storvsc/hv_vstorage.h	Mon Aug 22 05:38:44 2016	(r304586)
@@ -249,9 +249,9 @@ struct vstor_packet {
 /**
  * SRB Status Masks (can be combined with above status codes)
  */
-#define SRB_STATUS_QUEUE_FROZEN		0x40
-#define SRB_STATUS_AUTOSENSE_VALID	0x80
-
+#define SRB_STATUS_QUEUE_FROZEN         0x40
+#define SRB_STATUS_AUTOSENSE_VALID      0x80
+#define SRB_STATUS_INVALID_LUN          0X20
 
 /**
  *  Packet flags



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201608220538.u7M5ciNp065439>