From owner-freebsd-mobile Sun Jan 30 3:33: 7 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from freesbee.wheel.dk (freesbee.wheel.dk [193.162.159.97]) by hub.freebsd.org (Postfix) with ESMTP id B8B3A14E6F for ; Sun, 30 Jan 2000 03:32:57 -0800 (PST) (envelope-from jesper@skriver.dk) Received: by freesbee.wheel.dk (Postfix, from userid 1001) id C66FF3E3B; Sun, 30 Jan 2000 11:55:54 +0100 (CET) Date: Sun, 30 Jan 2000 11:55:54 +0100 From: Jesper Skriver To: Nate Williams Cc: mobile@FreeBSD.ORG, Niels Christian Bank-Pedersen Subject: Re: suspend problems with Dell Inspiron 3700 Message-ID: <20000130115554.A62677@skriver.dk> References: <20000123233639.A25328@bank-pedersen.dk> <20000124051239.A26570@skriver.dk> <200001300016.RAA11575@nomad.yogotech.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0i In-Reply-To: <200001300016.RAA11575@nomad.yogotech.com>; from nate@yogotech.com on Sat, Jan 29, 2000 at 05:16:48PM -0700 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Sat, Jan 29, 2000 at 05:16:48PM -0700, Nate Williams wrote: > > > sleep 5; zzz > > > > > > hack? Sounds like you're sleeping but then immediately waking up again. > > > > Doesn't do it here, my IBM ThinkPad 600E immediately wakes up again, see > > my post on -CURRENT "apm suspend" ... > > Is it plugged in? Most laptop will only suspend when they are using > batteries.... No this is when it's running on batteries - I tracked it down to a change done between *default date=2000.01.13.23.00.00 builds - and suspend works *default date=2000.01.14.03.00.00 cannot build *default date=2000.01.14.06.00.00 cannot build *default date=2000.01.14.12.00.00 cannot build *default date=2000.01.15.03.00.00 cannot build *default date=2000.01.15.23.00.00 cannot build *default date=2000.01.16.08.00.00 cannot build *default date=2000.01.16.18.00.00 cannot build *default date=2000.01.17.02.00.00 cannot build *default date=2000.01.17.13.00.00 cannot build *default date=2000.01.17.23.00.00 cannot build *default date=2000.01.18.22.00.00 builds - but suspend doesn't work /Jesper -- Jesper Skriver, jesper(at)skriver(dot)dk - CCIE# 5456 Work: Network manager @ AS3292 (Tele Danmark DataNetworks) Private: Geek @ AS2109 (A much smaller network ;-) One Unix to rule them all, One Resolver to find them, One IP to bring them all and in the zone to bind them. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Jan 30 7:23:48 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from mail2.svr.pol.co.uk (mail2.svr.pol.co.uk [195.92.193.210]) by hub.freebsd.org (Postfix) with ESMTP id B9AAD150DA; Sun, 30 Jan 2000 07:23:14 -0800 (PST) (envelope-from s.mitchell@computer.org) Received: from modem-54.powder-blue-tang.dialup.pol.co.uk ([62.137.51.54] helo=lungfish.freeserve.co.uk) by mail2.svr.pol.co.uk with esmtp (Exim 3.13 #0) id 12Evpk-0004ON-00; Sun, 30 Jan 2000 15:00:13 +0000 Received: from goatsucker.org (orac.goatsucker.org [192.168.1.2]) by lungfish.freeserve.co.uk (8.8.8/8.8.8) with ESMTP id NAA00958; Sun, 30 Jan 2000 13:56:07 GMT (envelope-from scott) Received: (from scott@localhost) by goatsucker.org (8.9.2/8.9.3) id NAA01265; Sun, 30 Jan 2000 13:51:29 GMT (envelope-from scott) Date: Sun, 30 Jan 2000 13:51:29 +0000 From: Scott Mitchell To: freebsd-mobile@freebsd.org, freebsd-hackers@freebsd.org Cc: freebsd-xircom@lovett.com Subject: clk0 interrupt accounting weirdness ??? Message-ID: <20000130135129.F1158@lungfish.freeserve.co.uk> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary=liOOAslEiF7prFVr Content-Transfer-Encoding: 8bit X-Mailer: Mutt 0.95.3i X-Operating-System: FreeBSD 3.1-RELEASE i386 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org --liOOAslEiF7prFVr Content-Type: text/plain; charset=us-ascii Hi all, The attached thread (apologies for the volume of text, but it is all relevant) came up on freebsd-xircom last week. Jose Alcaide actually posted to -mobile on the same subject a week or so before, but got no response. We figure it's definitely nothing to do with the Xircom driver in particular and probably nothing to do with pccard, so I'm bouncing it to any interested kernel gurus. Essentially, the irq line to which clk0 interrupts are accounted (in the output from vmstat -i) changes when pccards are inserted/removed. The same effect has been seen with cards using the xe0 and ed0 drivers. Any ideas? Scott -- =========================================================================== Scott Mitchell | PGP Key ID |"If I can't have my coffee, I'm just Cambridge, England | 0x54B171B9 | like a dried up piece of roast goat" s.mitchell@computer.org | 0xAA775B8B | -- J. S. Bach. --liOOAslEiF7prFVr Content-Type: message/rfc822 Content-Transfer-Encoding: 8bit Return-Path: Received: from valis.goatsucker.org (valis.goatsucker.org [192.168.1.1]) by lungfish.freeserve.co.uk (8.8.8/8.8.8) with ESMTP id VAA01618 for ; Tue, 25 Jan 2000 21:13:36 GMT (envelope-from owner-freebsd-xircom@lovett.com) X-From_: owner-freebsd-xircom@lovett.com Tue Jan 25 16:13:07 2000 Envelope-to: scott@lungfish.freeserve.co.uk Delivery-date: Tue, 25 Jan 2000 16:13:07 +0000 Received: from pop.pol.net.uk by valis.goatsucker.org (fetchmail-4.3.8 POP3) for (multi-drop); Tue, 25 Jan 2000 21:13:36 GMT Received: from [130.88.200.94] (helo=probity.mcc.ac.uk) by mail8.svr.pol.co.uk with esmtp (Exim 3.13 #0) id 12D8aU-0002GG-00 for scott@lungfish.freeserve.co.uk; Tue, 25 Jan 2000 16:13:02 +0000 Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by probity.mcc.ac.uk with esmtp (Exim 1.92 #3) for scott@lungfish.freeserve.co.uk id 12D8aT-0005nB-00; Tue, 25 Jan 2000 16:13:01 +0000 Received: from serenity.mcc.ac.uk (serenity.mcc.ac.uk [130.88.200.93]) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with ESMTP id QAA12355 for ; Tue, 25 Jan 2000 16:13:00 GMT (envelope-from owner-freebsd-xircom@lovett.com) Received: from [212.74.0.25] (helo=florence.pavilion.net) by serenity.mcc.ac.uk with esmtp (Exim 1.92 #3) for scott@freebsd-uk.eu.org id 12D8aS-0005mf-00; Tue, 25 Jan 2000 16:13:00 +0000 Received: from gallia.lovett.com (gallia.lovett.com [207.126.105.195]) by florence.pavilion.net (8.9.3/8.8.8) with ESMTP id QAA90328 for ; Tue, 25 Jan 2000 16:07:56 GMT (envelope-from owner-freebsd-xircom@lovett.com) Received: from majordom by gallia.lovett.com with local (Exim 3.12 #1) id 12D8VJ-000EVN-00 for freebsd-xircom-outgoing@lovett.com; Tue, 25 Jan 2000 08:07:41 -0800 Received: from [158.227.6.43] (helo=polaris.we.lc.ehu.es) by gallia.lovett.com with esmtp (Exim 3.12 #1) id 12D8VE-000EVG-00 for freebsd-xircom@lovett.com; Tue, 25 Jan 2000 08:07:38 -0800 Received: from we.lc.ehu.es (v-ger [158.227.6.179]) by polaris.we.lc.ehu.es (8.9.1/8.9.1) with ESMTP id RAA13434 for ; Tue, 25 Jan 2000 17:07:21 +0100 (MET) Message-ID: <388DCA3A.B4AA61B0@we.lc.ehu.es> Date: Tue, 25 Jan 2000 17:07:22 +0100 From: "Jose M. Alcaide" Organization: Universidad del =?iso-8859-1?Q?Pa=EDs?= Vasco - Dpto. de Electricidad y =?iso-8859-1?Q?Electr=F3nica?= X-Mailer: Mozilla 4.7 [en] (X11; U; FreeBSD 3.4-RELEASE i386) X-Accept-Language: es-ES, es, en-US, en MIME-Version: 1.0 To: freebsd-xircom@lovett.com Subject: clk0 interrupts accounted to xe ??? Content-Type: text/plain; charset=iso-8859-1 X-MIME-Autoconverted: from 8bit to quoted-printable by polaris.we.lc.ehu.es id RAA13434 Sender: owner-freebsd-xircom@lovett.com Precedence: bulk Reply-To: freebsd-xircom@lovett.com Content-Transfer-Encoding: 8bit X-MIME-Autoconverted: from quoted-printable to 8bit by lungfish.freeserve.co.uk id VAA01618 Hello, I have just purchased a Xircom RE-100BTX. It works fine, but I found something very strange. After booting the system (with no pccard inserted), "vmstat -i" shows: interrupt total rate clk0 irq0 718701 100 ... But, just after I insert the Xircom card and it is detected and enabled, another "vmstat -i" shows: interrupt total rate clk0 irq3 732248 110 (IRQ3 is the first available interrupt in my system, and it is assigned to the Xircom card by the pccardd daemon. I am running FreeBSD 3.4-RELEASE, no PAO.) After inserting the card, the clk0 interrupts are accounted to the interrupt level used by the Xircom card (I have tried other IRQ levels with the same result). The 100 interrupts/second generated by the timer are added to the interrupts generated by the Ethernet adapter. Since I don't have any other PCMCIA cards, I don't know whether this "problem" only happens with the xe driver or, on the contrary, it is a general problem of the FreeBSD's pccard driver. Did anybody find this same behavior? -- JMA ----------------------------------------------------------------------- José Mª Alcaide | mailto:jose@we.lc.ehu.es Universidad del País Vasco | mailto:jmas@FreeBSD.org Dpto. de Electricidad y Electrónica | http://www.we.lc.ehu.es/~jose Facultad de Ciencias - Campus de Lejona | Tel.: +34-946012479 48940 Lejona (Vizcaya) - SPAIN | Fax: +34-946013071 ----------------------------------------------------------------------- "Beware of Programmers who carry screwdrivers" -- Leonard Brandwein --liOOAslEiF7prFVr Content-Type: message/rfc822 Return-Path: Received: from valis.goatsucker.org (valis.goatsucker.org [192.168.1.1]) by lungfish.freeserve.co.uk (8.8.8/8.8.8) with ESMTP id VAA01629 for ; Tue, 25 Jan 2000 21:13:37 GMT (envelope-from owner-freebsd-xircom@lovett.com) X-From_: owner-freebsd-xircom@lovett.com Tue Jan 25 16:36:46 2000 Envelope-to: scott@lungfish.freeserve.co.uk Delivery-date: Tue, 25 Jan 2000 16:36:46 +0000 Received: from pop.pol.net.uk by valis.goatsucker.org (fetchmail-4.3.8 POP3) for (multi-drop); Tue, 25 Jan 2000 21:13:37 GMT Received: from [130.88.200.93] (helo=serenity.mcc.ac.uk) by mail7.svr.pol.co.uk with esmtp (Exim 3.13 #0) id 12D8xR-0005Vn-00 for scott@lungfish.freeserve.co.uk; Tue, 25 Jan 2000 16:36:45 +0000 Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by serenity.mcc.ac.uk with esmtp (Exim 1.92 #3) for scott@lungfish.freeserve.co.uk id 12D8xQ-0006SD-00; Tue, 25 Jan 2000 16:36:45 +0000 Received: from serenity.mcc.ac.uk (serenity.mcc.ac.uk [130.88.200.93]) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with ESMTP id QAA12726 for ; Tue, 25 Jan 2000 16:36:44 GMT (envelope-from owner-freebsd-xircom@lovett.com) Received: from [212.74.0.25] (helo=florence.pavilion.net) by serenity.mcc.ac.uk with esmtp (Exim 1.92 #3) for scott@freebsd-uk.eu.org id 12D8xP-0006S2-00; Tue, 25 Jan 2000 16:36:43 +0000 Received: from gallia.lovett.com (gallia.lovett.com [207.126.105.195]) by florence.pavilion.net (8.9.3/8.8.8) with ESMTP id QAA04592 for ; Tue, 25 Jan 2000 16:33:23 GMT (envelope-from owner-freebsd-xircom@lovett.com) Received: from majordom by gallia.lovett.com with local (Exim 3.12 #1) id 12D8tx-000EWl-00 for freebsd-xircom-outgoing@lovett.com; Tue, 25 Jan 2000 08:33:09 -0800 Received: from [194.178.168.50] (helo=smtppzh.pzh.nl) by gallia.lovett.com with smtp (Exim 3.12 #1) id 12D8tv-000EWf-00 for freebsd-xircom@lovett.com; Tue, 25 Jan 2000 08:33:08 -0800 Received: FROM smtp.pzh.nl BY smtppzh.pzh.nl ; Tue Jan 25 17:31:37 2000 0000 Received: from PZH40-1-Message_Server by smtp.pzh.nl with Novell_GroupWise; Tue, 25 Jan 2000 17:31:42 +0100 Message-Id: X-Mailer: Novell GroupWise 5.5.2 Date: Tue, 25 Jan 2000 17:31:08 +0100 From: "ROGIER MULHUIJZEN" To: , Subject: Re: clk0 interrupts accounted to xe ??? Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Disposition: inline Sender: owner-freebsd-xircom@lovett.com Precedence: bulk Reply-To: freebsd-xircom@lovett.com >After inserting the card, the clk0 interrupts are accounted to the >interrupt level used by the Xircom card (I have tried other IRQ levels >with the same result). The 100 interrupts/second generated by the >timer are added to the interrupts generated by the Ethernet adapter. >Since I don't have any other PCMCIA cards, I don't know whether this >"problem" only happens with the xe driver or, on the contrary, it is >a general problem of the FreeBSD's pccard driver. Hmmm.... taking a quick look at my 'vmstat -i' output I see the same thing: clk0 irq10 2667404 102 ----bunch of others deleted---- IRQ10 is the IRQ I hooked to my RealPort. I'll give the ed0 card I have at home a shot tonight. DocWilco --liOOAslEiF7prFVr Content-Type: message/rfc822 Return-Path: Received: from valis.goatsucker.org (valis.goatsucker.org [192.168.1.1]) by lungfish.freeserve.co.uk (8.8.8/8.8.8) with ESMTP id WAA01507 for ; Wed, 26 Jan 2000 22:14:15 GMT (envelope-from owner-freebsd-xircom@lovett.com) X-From_: owner-freebsd-xircom@lovett.com Wed Jan 26 22:06:38 2000 Envelope-to: scott@lungfish.freeserve.co.uk Delivery-date: Wed, 26 Jan 2000 22:06:38 +0000 Received: from pop.freeserve.net by valis.goatsucker.org (fetchmail-4.3.8 POP3) for (single-drop); Wed, 26 Jan 2000 22:14:15 GMT Received: from [130.88.200.94] (helo=probity.mcc.ac.uk) by mail13.svr.pol.co.uk with esmtp (Exim 3.13 #0) id 12DaaC-0008LC-00 for scott@lungfish.freeserve.co.uk; Wed, 26 Jan 2000 22:06:36 +0000 Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by probity.mcc.ac.uk with esmtp (Exim 1.92 #3) for scott@lungfish.freeserve.co.uk id 12DaaC-0004tB-00; Wed, 26 Jan 2000 22:06:36 +0000 Received: from serenity.mcc.ac.uk (serenity.mcc.ac.uk [130.88.200.93]) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with ESMTP id WAA38206 for ; Wed, 26 Jan 2000 22:06:35 GMT (envelope-from owner-freebsd-xircom@lovett.com) Received: from [212.74.0.25] (helo=florence.pavilion.net) by serenity.mcc.ac.uk with esmtp (Exim 1.92 #3) for scott@freebsd-uk.eu.org id 12DaaB-000PMx-00; Wed, 26 Jan 2000 22:06:35 +0000 Received: from gallia.lovett.com (gallia.lovett.com [207.126.105.195]) by florence.pavilion.net (8.9.3/8.8.8) with ESMTP id WAA51861 for ; Wed, 26 Jan 2000 22:04:36 GMT (envelope-from owner-freebsd-xircom@lovett.com) Received: from majordom by gallia.lovett.com with local (Exim 3.12 #1) id 12DaXv-000G4s-00 for freebsd-xircom-outgoing@lovett.com; Wed, 26 Jan 2000 14:04:15 -0800 Received: from [195.92.193.210] (helo=mail2.svr.pol.co.uk) by gallia.lovett.com with esmtp (Exim 3.12 #1) id 12DaXu-000G4m-00 for freebsd-xircom@lovett.com; Wed, 26 Jan 2000 14:04:14 -0800 Received: from modem-33.electric-blue-damsel.dialup.pol.co.uk ([62.137.5.33] helo=lungfish.freeserve.co.uk) by mail2.svr.pol.co.uk with esmtp (Exim 3.13 #0) id 12DaXs-0004iL-00 for freebsd-xircom@lovett.com; Wed, 26 Jan 2000 22:04:12 +0000 Received: (from scott@localhost) by lungfish.freeserve.co.uk (8.8.8/8.8.8) id VAA00408; Wed, 26 Jan 2000 21:31:59 GMT (envelope-from scott) Message-ID: <20000126213159.55106@lungfish.freeserve.co.uk> Date: Wed, 26 Jan 2000 21:31:59 +0000 From: Scott Mitchell To: freebsd-xircom@lovett.com Subject: Re: clk0 interrupts accounted to xe ??? References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.89i In-Reply-To: ; from ROGIER MULHUIJZEN on Tue, Jan 25, 2000 at 05:31:08PM +0100 X-Operating-System: FreeBSD 2.2.6-RELEASE i386 Sender: owner-freebsd-xircom@lovett.com Precedence: bulk Reply-To: freebsd-xircom@lovett.com On Tue, Jan 25, 2000 at 05:31:08PM +0100, ROGIER MULHUIJZEN wrote: > >After inserting the card, the clk0 interrupts are accounted to the > >interrupt level used by the Xircom card (I have tried other IRQ > levels > >with the same result). The 100 interrupts/second generated by the > >timer are added to the interrupts generated by the Ethernet adapter. > >Since I don't have any other PCMCIA cards, I don't know whether this > >"problem" only happens with the xe driver or, on the contrary, it is > >a general problem of the FreeBSD's pccard driver. > > Hmmm.... taking a quick look at my 'vmstat -i' output I see the same > thing: > > clk0 irq10 2667404 102 > ----bunch of others deleted---- > > IRQ10 is the IRQ I hooked to my RealPort. > > I'll give the ed0 card I have at home a shot tonight. Another data point: Script started on Wed Jan 26 21:18:22 2000 orac 78 ~> vmstat -i interrupt total rate clk0 irq3 23175 99 rtc0 irq8 29662 127 fdc0 irq6 1 0 wdc0 irq14 1934 8 atkbd0 irq1 468 2 psm0 irq12 9 0 Total 55249 238 [xe0 inserted here] orac 79 ~> vmstat -i interrupt total rate clk0 irq10 33303 100 rtc0 irq8 42600 127 fdc0 irq6 1 0 wdc0 irq14 2088 6 atkbd0 irq1 501 1 psm0 irq12 9 0 Total 78502 235 orac 80 ~> exit irq3 is where my pccard controller typically lives; irq10 is (of course) the line occupied by xe0. I'll be interested to see what happens with Rogier's ed0 (I should probably borrow a 3Com card from work and try the same thing) but I suspect this is a case of the generic pccard code being weird rather than anything specific to the xe0 driver. Our code doesn't do much with interrupts except handle them when they go off :-) All the setup stuff is done by pccardd before xe get a look in... Scott -- =========================================================================== Scott Mitchell | PGP Key ID | "Eagles may soar, but weasels Cambridge, England | 0x54B171B9 | don't get sucked into jet engines" s.mitchell@computer.org | 0xAA775B8B | -- Anon --liOOAslEiF7prFVr Content-Type: message/rfc822 Return-Path: Received: from valis.goatsucker.org (valis.goatsucker.org [192.168.1.1]) by lungfish.freeserve.co.uk (8.8.8/8.8.8) with ESMTP id VAA00328 for ; Thu, 27 Jan 2000 21:08:13 GMT (envelope-from owner-freebsd-xircom@lovett.com) X-From_: owner-freebsd-xircom@lovett.com Wed Jan 26 22:54:23 2000 Envelope-to: scott@lungfish.freeserve.co.uk Delivery-date: Wed, 26 Jan 2000 22:54:23 +0000 Received: from pop.pol.net.uk by valis.goatsucker.org (fetchmail-4.3.8 POP3) for (multi-drop); Thu, 27 Jan 2000 21:08:13 GMT Received: from [130.88.200.94] (helo=probity.mcc.ac.uk) by mail8.svr.pol.co.uk with esmtp (Exim 3.13 #0) id 12DbKR-0007qe-00 for scott@lungfish.freeserve.co.uk; Wed, 26 Jan 2000 22:54:23 +0000 Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by probity.mcc.ac.uk with esmtp (Exim 1.92 #3) for scott@lungfish.freeserve.co.uk id 12DbKQ-0005wf-00; Wed, 26 Jan 2000 22:54:22 +0000 Received: from serenity.mcc.ac.uk (serenity.mcc.ac.uk [130.88.200.93]) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with ESMTP id WAA38851 for ; Wed, 26 Jan 2000 22:54:22 GMT (envelope-from owner-freebsd-xircom@lovett.com) Received: from [212.74.0.25] (helo=florence.pavilion.net) by serenity.mcc.ac.uk with esmtp (Exim 1.92 #3) for scott@freebsd-uk.eu.org id 12DbKP-0000Hz-00; Wed, 26 Jan 2000 22:54:21 +0000 Received: from gallia.lovett.com (gallia.lovett.com [207.126.105.195]) by florence.pavilion.net (8.9.3/8.8.8) with ESMTP id WAA57962 for ; Wed, 26 Jan 2000 22:52:17 GMT (envelope-from owner-freebsd-xircom@lovett.com) Received: from majordom by gallia.lovett.com with local (Exim 3.12 #1) id 12DbHx-000GA7-00 for freebsd-xircom-outgoing@lovett.com; Wed, 26 Jan 2000 14:51:49 -0800 Received: from [207.139.235.10] (helo=yossman.net ident=root) by gallia.lovett.com with esmtp (Exim 3.12 #1) id 12DbHw-000GA1-00 for freebsd-xircom@lovett.com; Wed, 26 Jan 2000 14:51:48 -0800 Received: from localhost (drwilco@localhost) by yossman.net (8.9.3/8.9.3) with ESMTP id SAA86008 for ; Wed, 26 Jan 2000 18:06:55 -0500 (EST) (envelope-from drwilco@drwilco.net) Date: Wed, 26 Jan 2000 18:06:55 -0500 (EST) From: drwilco X-Sender: drwilco@yossman.net To: freebsd-xircom@lovett.com Subject: Re: clk0 interrupts accounted to xe ??? In-Reply-To: <20000126213159.55106@lungfish.freeserve.co.uk> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-xircom@lovett.com Precedence: bulk Reply-To: freebsd-xircom@lovett.com > irq3 is where my pccard controller typically lives; irq10 is (of course) > the line occupied by xe0. I'll be interested to see what happens with > Rogier's ed0 (I should probably borrow a 3Com card from work and try the > same thing) but I suspect this is a case of the generic pccard code being > weird rather than anything specific to the xe0 driver. Our code doesn't do > much with interrupts except handle them when they go off :-) All the setup > stuff is done by pccardd before xe get a look in... > Hmmmm, my dmesg output says: pcic: controller irq 3 And as you can see below clk0 is on irq 7... Anyways here is the log of vmstat -i's with my RealPort in xe0 mode, my ed0 card and my RealPort in sio mode: After a clean boot: interrupt total rate clk0 irq7 15771 100 rtc0 irq8 20182 128 wdc0 irq14 2826 18 fdc0 irq6 1 0 atkbd0 irq1 495 3 psm0 irq12 4503 28 ppc0 irq5 1 0 stray irq4 1 0 Total 43780 278 After insertion of my RealPort in xe0 mode: interrupt total rate clk0 irq10 23540 100 rtc0 irq8 30124 128 wdc0 irq14 2858 12 fdc0 irq6 1 0 atkbd0 irq1 708 3 psm0 irq12 8715 37 ppc0 irq5 1 0 stray irq4 1 0 Total 65948 280 After a ping -f of another host: interrupt total rate clk0 irq10 52835 144 rtc0 irq8 46783 128 wdc0 irq14 2906 7 fdc0 irq6 1 0 atkbd0 irq1 1084 2 psm0 irq12 11997 32 ppc0 irq5 1 0 stray irq4 1 0 Total 115608 316 After a reboot with RealPort inserted in sio mode: interrupt total rate clk0 irq7 15470 101 rtc0 irq8 19656 128 wdc0 irq14 2841 18 fdc0 irq6 1 0 atkbd0 irq1 425 2 psm0 irq12 2550 16 ppc0 irq5 1 0 stray irq4 1 0 Total 40945 267 After a ping -f over ppp: interrupt total rate clk0 irq7 23016 126 rtc0 irq8 23286 127 wdc0 irq14 2864 15 fdc0 irq6 1 0 atkbd0 irq1 563 3 psm0 irq12 2550 14 ppc0 irq5 1 0 stray irq4 1 0 Total 52282 287 Here is my pccard.conf entry for my RealPort: card "Xircom" "16-bit Ethernet + Modem 56" config 0x17 "sio1" 10 # config 0x27 "xe0" 10 insert echo Xircom CreditCard Modem inserted remove echo Xircom CreditCard Modem removed Note that the sio driver has irq 10 configured, but that it doesn't show up on the vmstat list, but that the rate gets skewed a LOT. (The ping -f generated a few interrupt-level buffer overflows) I think we can safely say that this is either something in vmstat, or in pccardd. Warner, what's your take on this? DocWilco (It's weird being called Rogier online =) ) --liOOAslEiF7prFVr Content-Type: message/rfc822 Content-Transfer-Encoding: 8bit Return-Path: Received: from valis.goatsucker.org (valis.goatsucker.org [192.168.1.1]) by lungfish.freeserve.co.uk (8.8.8/8.8.8) with ESMTP id VAA00526 for ; Thu, 27 Jan 2000 21:08:39 GMT (envelope-from owner-freebsd-xircom@lovett.com) X-From_: owner-freebsd-xircom@lovett.com Wed Jan 26 23:29:17 2000 Envelope-to: scott@lungfish.freeserve.co.uk Delivery-date: Wed, 26 Jan 2000 23:29:17 +0000 Received: from pop.pol.net.uk by valis.goatsucker.org (fetchmail-4.3.8 POP3) for (multi-drop); Thu, 27 Jan 2000 21:08:39 GMT Received: from [130.88.200.94] (helo=probity.mcc.ac.uk) by imailg3.svr.pol.co.uk with esmtp (Exim 3.13 #0) id 12DbsD-0000Rk-00 for scott@lungfish.freeserve.co.uk; Wed, 26 Jan 2000 23:29:17 +0000 Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by probity.mcc.ac.uk with esmtp (Exim 1.92 #3) for scott@lungfish.freeserve.co.uk id 12DbsD-0006Om-00; Wed, 26 Jan 2000 23:29:17 +0000 Received: from serenity.mcc.ac.uk (serenity.mcc.ac.uk [130.88.200.93]) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with ESMTP id XAA39518 for ; Wed, 26 Jan 2000 23:29:16 GMT (envelope-from owner-freebsd-xircom@lovett.com) Received: from [212.74.0.25] (helo=florence.pavilion.net) by serenity.mcc.ac.uk with esmtp (Exim 1.92 #3) for scott@freebsd-uk.eu.org id 12DbsC-0001Ia-00; Wed, 26 Jan 2000 23:29:16 +0000 Received: from gallia.lovett.com (gallia.lovett.com [207.126.105.195]) by florence.pavilion.net (8.9.3/8.8.8) with ESMTP id XAA62540 for ; Wed, 26 Jan 2000 23:27:22 GMT (envelope-from owner-freebsd-xircom@lovett.com) Received: from majordom by gallia.lovett.com with local (Exim 3.12 #1) id 12DbqB-000GCj-00 for freebsd-xircom-outgoing@lovett.com; Wed, 26 Jan 2000 15:27:11 -0800 Received: from [158.227.6.43] (helo=polaris.we.lc.ehu.es) by gallia.lovett.com with esmtp (Exim 3.12 #1) id 12DbqA-000GCd-00 for freebsd-xircom@lovett.com; Wed, 26 Jan 2000 15:27:10 -0800 Received: from we.lc.ehu.es (lxpx70.lx.ehu.es [158.227.99.70]) by polaris.we.lc.ehu.es (8.9.1/8.9.1) with ESMTP id AAA05691 for ; Thu, 27 Jan 2000 00:27:05 +0100 (MET) Message-ID: <388F82C7.B37CF139@we.lc.ehu.es> Date: Thu, 27 Jan 2000 00:27:03 +0100 From: "Jose M. Alcaide" Organization: Universidad del =?iso-8859-1?Q?Pa=EDs?= Vasco - Dpto. de Electricidad y =?iso-8859-1?Q?Electr=F3nica?= X-Mailer: Mozilla 4.7 [en] (X11; U; FreeBSD 3.4-RELEASE i386) X-Accept-Language: es-ES, es, en-US, en MIME-Version: 1.0 To: freebsd-xircom@lovett.com Subject: Re: clk0 interrupts accounted to xe ??? References: Content-Type: text/plain; charset=iso-8859-1 X-MIME-Autoconverted: from 8bit to quoted-printable by polaris.we.lc.ehu.es id AAA05691 Sender: owner-freebsd-xircom@lovett.com Precedence: bulk Reply-To: freebsd-xircom@lovett.com Content-Transfer-Encoding: 8bit X-MIME-Autoconverted: from quoted-printable to 8bit by lungfish.freeserve.co.uk id VAA00526 drwilco wrote: > [...] > > I think we can safely say that this is either something in vmstat, or in > pccardd. Warner, what's your take on this? > I absolutely agree. The problem is not in the xe driver. I have carefully examined the vmstat and pccard sources. Vmstat is innocent; it simply uses kvm_read(), so the interrupt accounting is messed up in the kernel memory. Pccardd has nothing to do with interrupt registration; this support is in the pccard driver. And with respect to pccard, the calls to register_intr() appear to be OK. Really, I have no idea of where is the problem. We need a kernel guru :-) This thread should be moved to -mobile, I think. -- JMA ----------------------------------------------------------------------- José Mª Alcaide | mailto:jose@we.lc.ehu.es Universidad del País Vasco | mailto:jmas@FreeBSD.org Dpto. de Electricidad y Electrónica | http://www.we.lc.ehu.es/~jose Facultad de Ciencias - Campus de Lejona | Tel.: +34-946012479 48940 Lejona (Vizcaya) - SPAIN | Fax: +34-946013071 ----------------------------------------------------------------------- "Beware of Programmers who carry screwdrivers" -- Leonard Brandwein --liOOAslEiF7prFVr-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Jan 30 10:26:44 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from ns.yogotech.com (ns.yogotech.com [206.127.79.126]) by hub.freebsd.org (Postfix) with ESMTP id 675671512D for ; Sun, 30 Jan 2000 10:26:37 -0800 (PST) (envelope-from nate@yogotech.com) Received: from nomad.yogotech.com (nomad.yogotech.com [206.127.79.115]) by ns.yogotech.com (8.9.3/8.9.3) with ESMTP id LAA10828; Sun, 30 Jan 2000 11:26:06 -0700 (MST) (envelope-from nate@nomad.yogotech.com) Received: (from nate@localhost) by nomad.yogotech.com (8.8.8/8.8.8) id LAA13919; Sun, 30 Jan 2000 11:26:03 -0700 (MST) (envelope-from nate) Date: Sun, 30 Jan 2000 11:26:03 -0700 (MST) Message-Id: <200001301826.LAA13919@nomad.yogotech.com> From: Nate Williams MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit To: Jesper Skriver Cc: Nate Williams , mobile@FreeBSD.ORG, Niels Christian Bank-Pedersen Subject: Re: suspend problems with Dell Inspiron 3700 In-Reply-To: <20000130115554.A62677@skriver.dk> References: <20000123233639.A25328@bank-pedersen.dk> <20000124051239.A26570@skriver.dk> <200001300016.RAA11575@nomad.yogotech.com> <20000130115554.A62677@skriver.dk> X-Mailer: VM 6.34 under 19.16 "Lille" XEmacs Lucid Reply-To: nate@yogotech.com (Nate Williams) Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > On Sat, Jan 29, 2000 at 05:16:48PM -0700, Nate Williams wrote: > > > > sleep 5; zzz > > > > > > > > hack? Sounds like you're sleeping but then immediately waking up again. > > > > > > Doesn't do it here, my IBM ThinkPad 600E immediately wakes up again, see > > > my post on -CURRENT "apm suspend" ... > > > > Is it plugged in? Most laptop will only suspend when they are using > > batteries.... > > No this is when it's running on batteries - I tracked it down to a > change done between [ Deleted ] Sorry, I can't help here... Nate To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Jan 30 23:22:26 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from kirk.giovannelli.it (kirk.giovannelli.it [194.184.65.4]) by hub.freebsd.org (Postfix) with ESMTP id 86D7D14D86 for ; Sun, 30 Jan 2000 23:21:16 -0800 (PST) (envelope-from gmarco@giovannelli.it) Received: from suzy (modem05.masternet.it [194.184.65.15]) by kirk.giovannelli.it (8.9.3/8.9.3) with ESMTP id IAA10542 for ; Mon, 31 Jan 2000 08:21:06 +0100 (CET) (envelope-from gmarco@giovannelli.it) Message-Id: <4.2.0.58.20000131080012.015941f0@194.184.65.4> X-Sender: gmarco@194.184.65.4 X-Mailer: QUALCOMM Windows Eudora Pro Version 4.2.0.58 Date: Mon, 31 Jan 2000 08:19:32 +0100 To: mobile@freebsd.org From: Gianmarco Giovannelli Subject: Any advice on Asus M8x00 ? Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I think I'll receive an Asus M8300 (it is not a choice that is depending on my willing). But I am very scared about the gardware it comes in these notebook because I think there is a very few things that will be supported by FreeBSD. Please let me know something more about FreeBSD and these components: 1) Integrated Modem/ether: Lucent 1646 DSP Integrated mobile Modem/Fax/LAN module board design (Manufacture's option) Hardware (DSP) V.90 modem and Intel 82559 10/100 Fast-Ethernet controller chip n Video-conferencing I/F V.80 Compliance AC'97 2.1 and WfM 2.0 supported The modem is seen by Windog as WinLt (Lucent Tech.). I think it is not supported now (and in the near future). Ethernet board is the same I fear... 2) I can try to use my pccards modem/ether but the slot is: RICOH R5C475II PCMCIA 2.1 compliant, supports one Type II slot 32-bit PC CardBus architecture and Zoomed VideoTM supported and I am scared that perhaps it is not supported, Any info ? 3) The video card is: SMI 710 2D VGA chip 128 bit graphic accelerationg engine; 4 MB video memory embedded Dual view and dual application in Windows 95/98/NT with LCD and CRT independent resolution and refresh rate Portrait or landscape display to allowfor CRT 90-degree CRT rotation. Even if windows detects it as Lynx (or similar) as I remember well... Info ? Any news of Xfree/Xig/Metrolink support ? 4) The Sound card: AC ' 97 CODEC AD1881 Built-in AC'97 stereo sound, with 3D sound effects Full duplex audio Built-in stereo speaker and microphone I can leave without sound and I think I'll do with this notebook... :-) More info at: http://www.asus.com/products/notebook/M8000/spec.html If someone can help me with these informations I can try to convince the company to change idea at least for me :-) And if the situation is so bad please suggest a good laptop with at least a 13.3 (1024x768) lcd in the range of 2500-2800 USD that it is well supported by FreeBSD. Thanks for attention and sorry for the long post. Best Regards, Gianmarco Giovannelli , "Unix expert since yesterday" http://www.giovannelli.it/~gmarco http://www2.masternet.it To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Jan 30 23:59:49 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from polaris.we.lc.ehu.es (polaris.we.lc.ehu.es [158.227.6.43]) by hub.freebsd.org (Postfix) with ESMTP id 96DEC14F2E for ; Sun, 30 Jan 2000 23:59:45 -0800 (PST) (envelope-from jose@we.lc.ehu.es) Received: from we.lc.ehu.es (lxpxct.lx.ehu.es [158.227.99.171]) by polaris.we.lc.ehu.es (8.9.1/8.9.1) with ESMTP id AAA17890 for ; Mon, 31 Jan 2000 00:04:59 +0100 (MET) Message-ID: <3894C396.D31AF876@we.lc.ehu.es> Date: Mon, 31 Jan 2000 00:04:54 +0100 From: "Jose M. Alcaide" Organization: Universidad del =?iso-8859-1?Q?Pa=EDs?= Vasco - Dpto. de Electricidad y =?iso-8859-1?Q?Electr=F3nica?= X-Mailer: Mozilla 4.7 [en] (X11; U; FreeBSD 3.4-RELEASE i386) X-Accept-Language: es-ES, es, en-US, en MIME-Version: 1.0 To: freebsd-mobile@FreeBSD.org Subject: some questions about APM Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hello, I am a newbie in the laptop world, so I have several basic questions about APM. I'll be very thankful to anyone who answers any of these questions :) The laptop I am using is a Dell Inspiron 3700, and it is running 3.4-RELEASE. Also, I must say that I have carefully read the source of the apm(4) driver. 1. I am confused about the "idling CPU" support. My laptop has an APM BIOS setting called "Smart CPU" which, when enabled, "adjusts the CPU clock according to the needs of the application" [sic]. However, the apm(4) boot messages say "Idling CPU disabled" -when compiled with APM_DEBUG set-; this information is returned by the APM_INSTCHECK vm86 call to the APM BIOS. 2. Is there any way to know whether the APM BIOS halts the CPU when the "CPU idle" function is invoked? 3. What is the difference between APM "engage" and "enable"? 4. Are the APM BIOS settings overridden by the apm(4) initialization? (Note: I added VM86 support to the kernel). I set timeouts for LCD turnoff and system suspend, but they don't have any effect once apm(4) has been initialized -even before being enabled-: when I interrupt the system boot (in the loader, when APM has not been yet initialized), the APM BIOS timeouts work; but, after booting in single user mode (so apm has not been yet enabled), they don't. However, the "hard disk timeout" _does_ work. 5. Is the APM BIOS API available for free downloading? I followed a link from the PAO home page to the Intel web site, but it is broken; then, I searched the Intel web site for any APM developer guide, to no avail :( . Of course, I am willing to collaborate to improve the FreeBSD's APM support. As I said above, I'll be grateful for any answer to any of these questions. Cheers, -- JMA ----------------------------------------------------------------------- José Mª Alcaide | mailto:jose@we.lc.ehu.es Universidad del País Vasco | mailto:jmas@FreeBSD.org Dpto. de Electricidad y Electrónica | http://www.we.lc.ehu.es/~jose Facultad de Ciencias - Campus de Lejona | Tel.: +34-946012479 48940 Lejona (Vizcaya) - SPAIN | Fax: +34-946013071 ----------------------------------------------------------------------- "Beware of Programmers who carry screwdrivers" -- Leonard Brandwein To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Jan 31 1:39:58 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from ntua.gr (achilles.noc.ntua.gr [147.102.222.210]) by hub.freebsd.org (Postfix) with ESMTP id 20A9414DD0; Mon, 31 Jan 2000 01:39:49 -0800 (PST) (envelope-from past@netmode.ece.ntua.gr) Received: from netmode.ece.ntua.gr (dolly.netmode.ece.ntua.gr [147.102.13.10]) by ntua.gr (8.9.3/8.9.3) with ESMTP id LAA25259; Mon, 31 Jan 2000 11:39:42 +0200 (EET) Received: by netmode.ece.ntua.gr (Postfix, from userid 410) id 68B9C85C3; Mon, 31 Jan 2000 11:32:50 +0200 (EET) Date: Mon, 31 Jan 2000 11:32:49 +0200 From: Panagiotis Astithas To: Scott Mitchell Cc: freebsd-mobile@FreeBSD.ORG, freebsd-hackers@FreeBSD.ORG Subject: Re: clk0 interrupt accounting weirdness ??? Message-ID: <20000131113249.A23568@netmode.ece.ntua.gr> Reply-To: past@netmode.ntua.gr Mail-Followup-To: Scott Mitchell , freebsd-mobile@FreeBSD.ORG, freebsd-hackers@FreeBSD.ORG References: <20000130135129.F1158@lungfish.freeserve.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0i In-Reply-To: <20000130135129.F1158@lungfish.freeserve.co.uk>; from s.mitchell@computer.org on Sun, Jan 30, 2000 at 01:51:29PM +0000 X-Organizational-Unit: Network Management and Optimal Design Laboratory X-Organization: National Technical University of Athens, GREECE X-Work-Phone: +30-1-772-1-450 X-Work-FAX: +30-1-772-1-452 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Sun, Jan 30, 2000 at 01:51:29PM +0000, Scott Mitchell wrote: > Essentially, the irq line to which clk0 interrupts are accounted (in the > output from vmstat -i) changes when pccards are inserted/removed. The same > effect has been seen with cards using the xe0 and ed0 drivers. FWIW, I also experience the same behavior: past@laptop$ vmstat -i interrupt total rate clk0 irq10 488774 100 ... past@laptop$ grep config /etc/pccard.conf config 0x0 "ed0" 10 ... I did mention it on this list a while ago. Perhaps we should move this to -stable? -past To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Jan 31 1:55:25 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from ntua.gr (achilles.noc.ntua.gr [147.102.222.210]) by hub.freebsd.org (Postfix) with ESMTP id 020CB14BFC for ; Mon, 31 Jan 2000 01:55:19 -0800 (PST) (envelope-from past@netmode.ece.ntua.gr) Received: from netmode.ece.ntua.gr (dolly.netmode.ece.ntua.gr [147.102.13.10]) by ntua.gr (8.9.3/8.9.3) with ESMTP id LAA28949; Mon, 31 Jan 2000 11:51:32 +0200 (EET) Received: by netmode.ece.ntua.gr (Postfix, from userid 410) id 6D55385C3; Mon, 31 Jan 2000 11:44:40 +0200 (EET) Date: Mon, 31 Jan 2000 11:44:39 +0200 From: Panagiotis Astithas To: Parag Patel Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: Help with PCMCIA ether card Message-ID: <20000131114439.B23568@netmode.ece.ntua.gr> Reply-To: past@netmode.ntua.gr Mail-Followup-To: Parag Patel , freebsd-mobile@FreeBSD.ORG References: <6950.949106760@pinhead.parag.codegen.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0i In-Reply-To: <6950.949106760@pinhead.parag.codegen.com>; from parag@cgt.com on Fri, Jan 28, 2000 at 04:46:00PM -0800 X-Organizational-Unit: Network Management and Optimal Design Laboratory X-Organization: National Technical University of Athens, GREECE X-Work-Phone: +30-1-772-1-450 X-Work-FAX: +30-1-772-1-452 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Fri, Jan 28, 2000 at 04:46:00PM -0800, Parag Patel wrote: > > Hello. I was given a Toshiba 420CDT laptop to play with and I'm trying > to get it up on my local net. Unfortunately my local PC dealer didn't > have any of the known PCMCIA cards (listed in pccard.conf.sample) in > stock, so I (foolishly) took a chance on an Edimax EP-4101 16-bit PCMCIA > 10/100 ether card. > > Well, after some hacking around with pccard.conf and such, I can't seem > to figure out which driver (if any) support this card. The eidmax site > doesn't seem to have any more about this card's innards than the docs > that came with the card. > > The pccardc dumpcis output is appended below. I don't understand how > this data maps to the pccard.conf file. My guess is that > config 0x07 "ed0" ? > ought to work if the driver can understand this card, yes? > > At the moment, I'm booting and running the precompiled pccard kernel > that ships on the FBSD 3.4 CDs. I copied it off of the install floppy > to / as the default GENERIC kernel isn't setup to do pccard stuff. The > kernel's dmesg is also appended below. > > Any help would be much appreciated, even if it is to return the card. > Thanks in advance! > > > -- Parag Patel Try editing your /etc/pccard.conf, and inserting the following: card "PCMCIA" "FastEtherCard" config 0x7 "ed0" ? insert echo PCMCIA FastEtherCard inserted insert /etc/pccard_ether ed0 remove echo PCMCIA FastEtherCard removed remove /sbin/ifconfig ed0 delete If that doesn't work, try changing the "?" to every available irq (10 is a good candidate). I find it strange that every configuration index is 0x7 but perhaps it is normal. I hope this helps. -past To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Jan 31 7: 2:20 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from mail.webmonster.de (datasink.webmonster.de [194.162.162.209]) by hub.freebsd.org (Postfix) with SMTP id 6520C14CA8 for ; Mon, 31 Jan 2000 07:02:15 -0800 (PST) (envelope-from karsten@rohrbach.de) Received: (qmail 89547 invoked by uid 1000); 31 Jan 2000 15:02:13 -0000 Date: Mon, 31 Jan 2000 16:02:13 +0100 From: "Karsten W. Rohrbach" To: Nick Hibma Cc: Gorden Fischer , mobile@FreeBSD.ORG Subject: Re: Vaio 505S + fdc driver Message-ID: <20000131160213.B89178@rohrbach.de> Reply-To: karsten@rohrbach.de References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0i In-Reply-To: ; from n_hibma@webweaving.org on Sun, Jan 23, 2000 at 12:58:19PM +0000 X-Arbitrary-Number-Of-The-Day: 42 X-Sender: karsten@rohrbach.de Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org my n505x has a "Y-E Data Flashbuster" USB floppy, it gets attached as ugen0. didnt try the umass driver, since my -current is 20000105 i dont know the status of the umass code... /k Nick Hibma(n_hibma@webweaving.org)@Sun, Jan 23, 2000 at 12:58:19PM +0000: > > It's not a USB device. The 505's with a USB floppy come with the floppy > on a proper USB connector. If you want to prove it to yourself, compile > ugen module (cd /sys/modules/ugen; make load) and run usbd -e. If that > does not make a device show up, then there is no USB device connected to > your system. > > The replicator is a normal floppy drive for all I know. > > Nick > > > Has anyone try to make the fdc driver work for Vaio 505S? The drive is > > attached to a replicator (looks and feels like a USB device for me). > > > > I am unable to mount the floppy disk. The dmesg output verifies the > > problem. Is this problem been asked before? If so, can you tell me how > > to make it work? > > > > Fischer > > > > > > dmesg output: > > > > ======================================================================== > > Copyright (c) 1992-1999 FreeBSD Inc. > > Copyright (c) 1982, 1986, 1989, 1991, 1993 > > The Regents of the University of California. All rights reserved. > > FreeBSD 3.4-RELEASE #0: Sat Jan 22 21:11:24 PST 2000 > > root@sony.uniqsite.com:/usr/src/sys/compile/Sony > > Timecounter "i8254" frequency 1193182 Hz > > CPU: Celeron (331.58-MHz 686-class CPU) > > Origin = "GenuineIntel" Id = 0x66a Stepping = 10 > > Features=0x183f9ff > > real memory = 67108864 (65536K bytes) > > avail memory = 62357504 (60896K bytes) > > Pentium Pro MTRR support enabled > > Probing for devices on PCI bus 0: > > chip0: rev 0x03 on pci0.0.0 > > fxp0: rev 0x08 int a irq 9 on pci0.6.0 > > fxp0: Ethernet address 08:00:46:04:57:a0 > > chip1: rev 0x02 on pci0.7.0 > > ide_pci0: rev 0x01 on pci0.7.1 > > uhci0: rev 0x01 int d irq 9 on pci0.7.2 > > chip2: rev 0x02 on pci0.7.3 > > vga0: rev 0x12 int a irq 9 on pci0.8.0 > > pcic0: rev 0x00 int a irq 255 on pci0.10.0 > > RL5C4XX PCI Config Reg: [CSC isa irq] > > Probing for PnP devices: > > Probing for devices on the ISA bus: > > sc0 on isa > > sc0: VGA color <16 virtual consoles, flags=0x0> > > pcm0 not found > > atkbdc0 at 0x60-0x6f on motherboard > > atkbd0 irq 1 on isa > > psm0 irq 12 flags 0x800 on isa > > psm0: model Generic PS/2 mouse, device ID 0 > > sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa > > sio0: type 16550A > > sio1: configured irq 3 not in bitmap of probed irqs 0 > > sio1 not found at 0x2f8 > > fdc0: direction bit not set > > fdc0: cmd 3 failed at out byte 1 of 3 > > fdc0 not found at 0x3f0 > > wdc0 at 0x1f0-0x1f7 irq 14 flags 0xa0ffa0ff on isa > > wdc0: unit 0 (wd0): , DMA, 32-bit, multi-block-16 > > wd0: 6194MB (12685680 sectors), 13424 cyls, 15 heads, 63 S/T, 512 B/S > > wdc1 not found at 0x170 > > pcic0 at 0x3e0-0x3e1 irq 11 on isa > > PC-Card ctlr(0) Ricoh RL5C475/476 [CardBus bridge mode] (5 mem & 2 I/O windows) > > pcic0: slot 0 controller I/O address 0x3e0 > > pcic1: sharing irq 11 with other pcic > > pcic1 not found at 0x3e2 > > pcic1: sharing irq 11 with other pcic > > pcic1 not found at 0x3e4 > > vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa > > npx0 on motherboard > > npx0: INT 16 interface > > apm0 on isa > > apm: found APM BIOS version 1.2 > > usb0: > > uhub0 at usb0 > > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > > uhub0: 2 ports with 2 removable, self powered > > Initializing PC-card drivers: fdc sio wdc > > changing root device to wd0s2a > > Card inserted, slot 0 > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-mobile" in the body of the message > > > > -- > n_hibma@webweaving.org > n_hibma@freebsd.org USB project > http://www.etla.net/~n_hibma/ > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-mobile" in the body of the message -- > question = ( to ) ? be : ! be; // Wm. Shakespeare http://www.webmonster.de http://www.apache.de http://www.splatterworld.de (NIC-HDL KR433/KR11-RIPE) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Jan 31 7:18:34 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from mfo01.iij.ad.jp (mfo01.iij.ad.jp [202.232.2.118]) by hub.freebsd.org (Postfix) with ESMTP id 8EFCB14C14 for ; Mon, 31 Jan 2000 07:18:32 -0800 (PST) (envelope-from bishop@rr.iij4u.or.jp) Received: from rr.iij4u.or.jp (rr.iij4u.or.jp [210.130.0.42]) by mfo01.iij.ad.jp (8.8.8/MFO1.3) with ESMTP id AAA15094; Tue, 1 Feb 2000 00:18:26 +0900 (JST) Received: from localhost (h172.p048.iij4u.or.jp [210.130.48.172]) by rr.iij4u.or.jp (8.8.8+2.2IIJ/4U1.1) with ESMTP id AAA04038; Tue, 1 Feb 2000 00:18:24 +0900 (JST) To: karsten@rohrbach.de Cc: n_hibma@webweaving.org, gfish123@pacbell.net, mobile@FreeBSD.ORG Cc: bishop@rr.iij4u.or.jp Subject: Re: Vaio 505S + fdc driver From: MAEKAWA Masahide In-Reply-To: <20000131160213.B89178@rohrbach.de> References: <20000131160213.B89178@rohrbach.de> X-Mailer: Mew version 1.94.1 on Emacs 19.34 / Mule 2.3 (SUETSUMUHANA) Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-Id: <20000201001835B.bishop@rr.iij4u.or.jp> Date: Tue, 01 Feb 2000 00:18:35 +0900 X-Dispatcher: imput version 990905(IM130) Lines: 19 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org "Karsten W. Rohrbach" wrote: >my n505x has a "Y-E Data Flashbuster" USB floppy, it gets attached as >ugen0. didnt try the umass driver, since my -current is 20000105 i dont >know the status of the umass code... umass(4) doesn't support USB floppy drives. In near future, we can support them. Because they seem to work fine in my house. ;-) I'm very busy, so my work is late. So please wait a few seconds. Thanks. --- MAEKAWA Masahide --- URL: http://kerberos.math.sci.kobe-u.ac.jp/~maekawa/ --- Kobe University (Faculty of Science, Department of Mathematics) --- Powered by BSD/OS, FreeBSD, NetBSD, OpenBSD To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Jan 31 9:15:40 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from webweaving.org (calcaphon.demon.co.uk [193.237.19.5]) by hub.freebsd.org (Postfix) with ESMTP id 0ACC014D4B for ; Mon, 31 Jan 2000 09:15:02 -0800 (PST) (envelope-from n_hibma@webweaving.org) Received: from localhost (localhost [127.0.0.1]) by webweaving.org (8.9.3/8.9.3) with ESMTP id QAA04661; Mon, 31 Jan 2000 16:17:27 GMT (envelope-from n_hibma@webweaving.org) Date: Mon, 31 Jan 2000 16:17:27 +0000 (GMT) From: Nick Hibma X-Sender: n_hibma@localhost Reply-To: Nick Hibma To: "Karsten W. Rohrbach" Cc: Gorden Fischer , mobile@FreeBSD.ORG Subject: Re: Vaio 505S + fdc driver In-Reply-To: <20000131160213.B89178@rohrbach.de> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Not supported yet. I have one of those though (courtesy of Y-E Data, thanks Jim Blackson, and all the docu) and plan to start writing support for it soon. Nick On Mon, 31 Jan 2000, Karsten W. Rohrbach wrote: > my n505x has a "Y-E Data Flashbuster" USB floppy, it gets attached as > ugen0. didnt try the umass driver, since my -current is 20000105 i dont > know the status of the umass code... > /k > > Nick Hibma(n_hibma@webweaving.org)@Sun, Jan 23, 2000 at 12:58:19PM +0000: > > > > It's not a USB device. The 505's with a USB floppy come with the floppy > > on a proper USB connector. If you want to prove it to yourself, compile > > ugen module (cd /sys/modules/ugen; make load) and run usbd -e. If that > > does not make a device show up, then there is no USB device connected to > > your system. > > > > The replicator is a normal floppy drive for all I know. > > > > Nick > > > > > Has anyone try to make the fdc driver work for Vaio 505S? The drive is > > > attached to a replicator (looks and feels like a USB device for me). > > > > > > I am unable to mount the floppy disk. The dmesg output verifies the > > > problem. Is this problem been asked before? If so, can you tell me how > > > to make it work? > > > > > > Fischer > > > > > > > > > dmesg output: > > > > > > ======================================================================== > > > Copyright (c) 1992-1999 FreeBSD Inc. > > > Copyright (c) 1982, 1986, 1989, 1991, 1993 > > > The Regents of the University of California. All rights reserved. > > > FreeBSD 3.4-RELEASE #0: Sat Jan 22 21:11:24 PST 2000 > > > root@sony.uniqsite.com:/usr/src/sys/compile/Sony > > > Timecounter "i8254" frequency 1193182 Hz > > > CPU: Celeron (331.58-MHz 686-class CPU) > > > Origin = "GenuineIntel" Id = 0x66a Stepping = 10 > > > Features=0x183f9ff > > > real memory = 67108864 (65536K bytes) > > > avail memory = 62357504 (60896K bytes) > > > Pentium Pro MTRR support enabled > > > Probing for devices on PCI bus 0: > > > chip0: rev 0x03 on pci0.0.0 > > > fxp0: rev 0x08 int a irq 9 on pci0.6.0 > > > fxp0: Ethernet address 08:00:46:04:57:a0 > > > chip1: rev 0x02 on pci0.7.0 > > > ide_pci0: rev 0x01 on pci0.7.1 > > > uhci0: rev 0x01 int d irq 9 on pci0.7.2 > > > chip2: rev 0x02 on pci0.7.3 > > > vga0: rev 0x12 int a irq 9 on pci0.8.0 > > > pcic0: rev 0x00 int a irq 255 on pci0.10.0 > > > RL5C4XX PCI Config Reg: [CSC isa irq] > > > Probing for PnP devices: > > > Probing for devices on the ISA bus: > > > sc0 on isa > > > sc0: VGA color <16 virtual consoles, flags=0x0> > > > pcm0 not found > > > atkbdc0 at 0x60-0x6f on motherboard > > > atkbd0 irq 1 on isa > > > psm0 irq 12 flags 0x800 on isa > > > psm0: model Generic PS/2 mouse, device ID 0 > > > sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa > > > sio0: type 16550A > > > sio1: configured irq 3 not in bitmap of probed irqs 0 > > > sio1 not found at 0x2f8 > > > fdc0: direction bit not set > > > fdc0: cmd 3 failed at out byte 1 of 3 > > > fdc0 not found at 0x3f0 > > > wdc0 at 0x1f0-0x1f7 irq 14 flags 0xa0ffa0ff on isa > > > wdc0: unit 0 (wd0): , DMA, 32-bit, multi-block-16 > > > wd0: 6194MB (12685680 sectors), 13424 cyls, 15 heads, 63 S/T, 512 B/S > > > wdc1 not found at 0x170 > > > pcic0 at 0x3e0-0x3e1 irq 11 on isa > > > PC-Card ctlr(0) Ricoh RL5C475/476 [CardBus bridge mode] (5 mem & 2 I/O windows) > > > pcic0: slot 0 controller I/O address 0x3e0 > > > pcic1: sharing irq 11 with other pcic > > > pcic1 not found at 0x3e2 > > > pcic1: sharing irq 11 with other pcic > > > pcic1 not found at 0x3e4 > > > vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa > > > npx0 on motherboard > > > npx0: INT 16 interface > > > apm0 on isa > > > apm: found APM BIOS version 1.2 > > > usb0: > > > uhub0 at usb0 > > > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > > > uhub0: 2 ports with 2 removable, self powered > > > Initializing PC-card drivers: fdc sio wdc > > > changing root device to wd0s2a > > > Card inserted, slot 0 > > > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > with "unsubscribe freebsd-mobile" in the body of the message > > > > > > > -- > > n_hibma@webweaving.org > > n_hibma@freebsd.org USB project > > http://www.etla.net/~n_hibma/ > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-mobile" in the body of the message > > -- > > question = ( to ) ? be : ! be; // Wm. Shakespeare > http://www.webmonster.de http://www.apache.de http://www.splatterworld.de > (NIC-HDL KR433/KR11-RIPE) > > -- n_hibma@webweaving.org n_hibma@freebsd.org USB project http://www.etla.net/~n_hibma/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Jan 31 9:46:19 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from gluttony.peregrine.com (nat-352.peregrine.com [63.82.231.98]) by hub.freebsd.org (Postfix) with ESMTP id 7C29D14F65 for ; Mon, 31 Jan 2000 09:46:17 -0800 (PST) (envelope-from erich@peregrine.com) Received: from peregrine.com (sys461.peregrine.com [172.18.1.61]) by gluttony.peregrine.com (8.9.3/8.9.3) with ESMTP id JAA07695; Mon, 31 Jan 2000 09:43:43 -0800 (PST) (envelope-from erich@peregrine.com) Message-ID: <3895CA4D.ACA65FA5@peregrine.com> Date: Mon, 31 Jan 2000 09:45:49 -0800 From: Eric Hedstrom X-Mailer: Mozilla 4.7 [ja] (WinNT; U) X-Accept-Language: ja MIME-Version: 1.0 To: Gianmarco Giovannelli Cc: mobile@FreeBSD.ORG Subject: Re: Any advice on Asus M8x00 ? References: <4.2.0.58.20000131080012.015941f0@194.184.65.4> Content-Type: text/plain; charset=iso-2022-jp Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org The Intel ethernet is supported with the fxp driver, but the Lucent modem probably won't work. PC Cards are supported, but Cardbus cards aren't yet. I don't know about your video and audio; you could check www.xfree86.org for a list of supported video chipsets. Eric Gianmarco Giovannelli wrote: > > I think I'll receive an Asus M8300 (it is not a choice that is depending on > my willing). > But I am very scared about the gardware it comes in these notebook because > I think there is a very few things that will be supported by FreeBSD. > Please let me know something more about FreeBSD and these components: > > 1) Integrated Modem/ether: > Lucent 1646 DSP > Integrated mobile Modem/Fax/LAN module board design (Manufacture's option) > Hardware (DSP) V.90 modem and Intel 82559 10/100 Fast-Ethernet > controller chip n Video-conferencing I/F V.80 Compliance > AC'97 2.1 and WfM 2.0 supported > > The modem is seen by Windog as WinLt (Lucent Tech.). I think it is not > supported now (and in the near future). > Ethernet board is the same I fear... > > 2) I can try to use my pccards modem/ether but the slot is: > RICOH R5C475II > PCMCIA 2.1 compliant, supports one Type II slot > 32-bit PC CardBus architecture and Zoomed VideoTM supported > > and I am scared that perhaps it is not supported, Any info ? > > 3) The video card is: > SMI 710 2D VGA chip > 128 bit graphic accelerationg engine; 4 MB video memory embedded > Dual view and dual application in Windows 95/98/NT with LCD and CRT > independent resolution and refresh rate > Portrait or landscape display to allowfor CRT 90-degree CRT rotation. > > Even if windows detects it as Lynx (or similar) as I remember well... > Info ? Any news of Xfree/Xig/Metrolink support ? > > 4) The Sound card: > AC ' 97 CODEC AD1881 > Built-in AC'97 stereo sound, with 3D sound effects > Full duplex audio > Built-in stereo speaker and microphone > > I can leave without sound and I think I'll do with this notebook... :-) > > More info at: http://www.asus.com/products/notebook/M8000/spec.html > > If someone can help me with these informations I can try to convince the > company to change idea at least for me :-) And if the situation is so bad > please suggest a good laptop with at least a 13.3 (1024x768) lcd in the > range of 2500-2800 USD that it is well supported by FreeBSD. > > Thanks for attention and sorry for the long post. > > Best Regards, > Gianmarco Giovannelli , "Unix expert since yesterday" > http://www.giovannelli.it/~gmarco > http://www2.masternet.it > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-mobile" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Jan 31 10:21:43 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from tasogare.imasy.or.jp (tasogare.imasy.or.jp [202.227.24.5]) by hub.freebsd.org (Postfix) with ESMTP id CA8C514C25 for ; Mon, 31 Jan 2000 10:21:35 -0800 (PST) (envelope-from iwasaki@jp.FreeBSD.org) Received: from localhost (isdn54.imasy.or.jp [202.227.24.246]) by tasogare.imasy.or.jp (8.9.3+3.2W/3.7W-tasogare/smtpfeed 1.01) with ESMTP id DAA29152; Tue, 1 Feb 2000 03:21:26 +0900 (JST) (envelope-from iwasaki@jp.FreeBSD.org) Message-Id: <200001311821.DAA29152@tasogare.imasy.or.jp> To: jose@we.lc.ehu.es Cc: freebsd-mobile@FreeBSD.org Subject: Re: some questions about APM In-Reply-To: Your message of "Mon, 31 Jan 2000 00:04:54 +0100" <3894C396.D31AF876@we.lc.ehu.es> References: <3894C396.D31AF876@we.lc.ehu.es> X-Mailer: Mew version 1.93 on Emacs 19.34 / Mule 2.3 (SUETSUMUHANA) Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Date: Tue, 01 Feb 2000 03:21:25 +0900 From: Mitsuru IWASAKI X-Dispatcher: imput version 980905(IM100) Lines: 16 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, > 5. Is the APM BIOS API available for free downloading? I followed a link from > the PAO home page to the Intel web site, but it is broken; then, I searched > the Intel web site for any APM developer guide, to no avail :( . Of course, > I am willing to collaborate to improve the FreeBSD's APM support. Yes. I know only mirosoft web site; http://www.microsoft.com/HWDEV/busbios/amp_12.htm BTW, we're implement ACPI for FreeBSD, please see http://www.teleport.com/~acpi/ and http://www.jp.FreeBSD.org/acpi/ for more infomation. Now AML interpreter start working in userland. # your problem might be related with ACPI (APM compatible mode of ACPI?)... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Jan 31 11:29:25 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from pinhead.parag.codegen.com (207-44-235-154.CodeGen.COM [207.44.235.154]) by hub.freebsd.org (Postfix) with ESMTP id 7712A14CF7 for ; Mon, 31 Jan 2000 11:29:22 -0800 (PST) (envelope-from parag@pinhead.parag.codegen.com) Received: from pinhead.parag.codegen.com (parag@localhost.parag.codegen.com [127.0.0.1]) by pinhead.parag.codegen.com (8.9.3/8.9.3) with ESMTP id LAA65734; Mon, 31 Jan 2000 11:27:38 -0800 (PST) (envelope-from parag@pinhead.parag.codegen.com) To: Panagiotis Astithas Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: Help with PCMCIA ether card In-Reply-To: Message from Panagiotis Astithas of "Mon, 31 Jan 2000 11:44:39 +0200." <20000131114439.B23568@netmode.ece.ntua.gr> X-Image-URL: http://www.codegen.com/images/CG-logo-only.gif X-URL: http://www.codegen.com X-Face: =O'Kj74icvU|oS*<7gS/8'\Pbpm}okVj*@UC!IgkmZQAO!W[|iBiMs*|)n*`X ]pW%m>Oz_mK^Gdazsr.Z0/JsFS1uF8gBVIoChGwOy{EK=<6g?aHE`[\S]C]T0Wm Date: Mon, 31 Jan 2000 11:27:38 -0800 Message-ID: <65730.949346858@pinhead.parag.codegen.com> From: Parag Patel Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org >Try editing your /etc/pccard.conf, and inserting the following: >card "PCMCIA" "FastEtherCard" > config 0x7 "ed0" ? > insert echo PCMCIA FastEtherCard inserted > insert /etc/pccard_ether ed0 > remove echo PCMCIA FastEtherCard removed > remove /sbin/ifconfig ed0 delete > >If that doesn't work, try changing the "?" to every available irq (10 is a >good candidate). I find it strange that every configuration index is 0x7 but >perhaps it is normal. > >I hope this helps. Thanks, but unfortunately that didn't work either. I even went through trying a bunch of numbers instead of the 0x07 as well. After trying a bunch of permutations including the above, I finally gave up, exchanged (upgraded) the card for a 3Com Megahertz 574B. It isn't quite supported under 3.4 althouth I did make it work (ep0 didn't pick up the correct MAC addr but the bogus one it came up with still worked). But I upgraded the laptop to 4.0-CURRENT and it's quite happy now, with the correct MAC addr. For all I know, the Edimax card itself may have been bad. Thanks anyway! -- Parag To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Jan 31 22:50:19 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from haig.cs.ucl.ac.uk (haig.cs.ucl.ac.uk [128.16.6.8]) by builder.freebsd.org (Postfix) with SMTP id B36943D07 for ; Mon, 31 Jan 2000 22:50:16 -0800 (PST) Received: from ginger.cs.ucl.ac.uk by haig.cs.ucl.ac.uk with local SMTP id ; Tue, 1 Feb 2000 06:49:58 +0000 X-Mailer: exmh version 2.0.2 To: freebsd-mobile@FreeBSD.ORG Subject: making a wireless interface the default one Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Tue, 01 Feb 2000 06:46:12 +0000 Message-ID: <2986.949387572@cs.ucl.ac.uk> From: Theo PAGTZIS Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, could anyone hint on how I could make a wireless interface (wi0) from the PAO distribution the default interface while there are other fixed net interfaces on my PC box ? Thanks Theo To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Jan 31 23:32:10 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from rover.village.org (rover.village.org [204.144.255.49]) by builder.freebsd.org (Postfix) with ESMTP id 25EB33D04 for ; Mon, 31 Jan 2000 23:32:06 -0800 (PST) Received: from harmony.village.org (harmony.village.org [10.0.0.6]) by rover.village.org (8.9.3/8.9.3) with ESMTP id UAA05784; Mon, 31 Jan 2000 20:17:33 -0700 (MST) (envelope-from imp@harmony.village.org) Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id UAA10047; Mon, 31 Jan 2000 20:17:43 -0700 (MST) Message-Id: <200002010317.UAA10047@harmony.village.org> To: Gianmarco Giovannelli Subject: Re: Any advice on Asus M8x00 ? Cc: mobile@FreeBSD.org In-reply-to: Your message of "Mon, 31 Jan 2000 08:19:32 +0100." <4.2.0.58.20000131080012.015941f0@194.184.65.4> References: <4.2.0.58.20000131080012.015941f0@194.184.65.4> Date: Mon, 31 Jan 2000 20:17:43 -0700 From: Warner Losh Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In message <4.2.0.58.20000131080012.015941f0@194.184.65.4> Gianmarco Giovannelli writes: : The modem is seen by Windog as WinLt (Lucent Tech.). I think it is not : supported now (and in the near future). Yes. : Ethernet board is the same I fear... Most intel ethernet chips are supported. : 2) I can try to use my pccards modem/ether but the slot is: : RICOH R5C475II : PCMCIA 2.1 compliant, supports one Type II slot : 32-bit PC CardBus architecture and Zoomed VideoTM supported : : and I am scared that perhaps it is not supported, Any info ? This should be good. I have a very similar part in my machine. Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Jan 31 23:58:45 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from mail2.digital.com (mail2.digital.com [204.123.2.56]) by builder.freebsd.org (Postfix) with ESMTP id E3DB33D55 for ; Mon, 31 Jan 2000 23:58:39 -0800 (PST) Received: from pobox1.pa.dec.com (pobox1.pa.dec.com [16.1.240.19]) by mail2.digital.com (8.9.2/8.9.3/WV2.0h) with SMTP id XAA09953 for ; Mon, 31 Jan 2000 23:58:28 -0800 (PST) Received: from raquet.pa.dec.com by pobox1.pa.dec.com (5.65v3.2/1.1.10.5/07Nov97-1157AM) id AA23329; Mon, 31 Jan 2000 23:58:27 -0800 Received: from localhost by raquet.pa.dec.com (5.65v4.0/1.1.10.5/07Nov97-1157AM) id AA07425; Mon, 31 Jan 2000 23:58:27 -0800 Date: Mon, 31 Jan 2000 23:58:27 -0800 (PST) From: Kevin Leung To: freebsd-mobile@freebsd.org Subject: Q: does anyone have a fix to get OZ6832 PCMCIA CardBus bridge chip working under FreeBSD 3.4R Message-Id: Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I am having trouble getting the O2Micro OZ6832 PCMCIA CardBus bridge chip on a Thinkpad working under FreeBSD 3.4R. The boot up identifies it as vendor=1217 and device=6832 rev 0x34 irq 9. The reason I didnt think it was working is due to "pccardc dumpcis" reporting 0 slots occupied. I am using the PCCARD kernel config file in /sys/i386/conf. I recall reading that the OZ6832 can function in i82386 mode. Do I need to hack the /sys/pci/pcic_p.h and pcic_p.c and /sys/pccard/i82386.h files? -Kevin To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue Feb 1 0:56:38 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from hiro.netizen.com.au (hiro.netizen.com.au [203.30.75.2]) by builder.freebsd.org (Postfix) with ESMTP id 186E43D7C for ; Tue, 1 Feb 2000 00:56:34 -0800 (PST) Received: (from benno@localhost) by hiro.netizen.com.au (8.9.3/8.9.3) id QAA25983 for freebsd-mobile@freebsd.org; Tue, 1 Feb 2000 16:30:06 +1100 Date: Tue, 1 Feb 2000 16:30:06 +1100 From: Benno Rice To: freebsd-mobile@freebsd.org Subject: pccard.conf entries... Message-ID: <20000201163005.A24914@netizen.com.au> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.6i Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Here's a new entry: # Surecom EtherPerfect EP-427 card "TAMARACK" "Ethernet" config 0x21 "ed0" ? insert logger -t pccard:$device -s Surecom Ethernet card inserted insert /etc/pccard_ether $device remove logger -t pccard:$device -s Surecom Ethernet card removed remove ifconfig $device delete And the IC-CARD+ ethernet card I posted before works with the "config auto" stuff. The following diff to pccard.conf.sample makes both changes. --- /etc/pccard.conf.sample Fri Jan 28 10:00:09 2000 +++ /etc/pccard.conf Tue Feb 1 16:02:24 2000 @@ -786,7 +786,7 @@ # IC-CARD+ Ethernet card card "IC-CARD+" "IC-CARD+" - config 0x20 "ed0" ? + config auto "ed0" ? insert logger -t pccard:$device -s IC-CARD+ Ethernet card inserted insert /etc/pccard_ether $device remove logger -t pccard:$device -s IC-CARD+ Ethernet card removed @@ -797,3 +797,11 @@ config 0x22 "sio3" ? insert logger -t pccard:$device -s Banksia CardModem 56 inserted remove logger -t pccard:$device -s Banksia CardModem 56 removed + +# Surecom EtherPerfect EP-427 +card "TAMARACK" "Ethernet" + config 0x21 "ed0" ? + insert logger -t pccard:$device -s Surecom Ethernet card inserted + insert /etc/pccard_ether $device + remove logger -t pccard:$device -s Surecom Ethernet card removed + remove ifconfig $device delete -- Benno Rice "No, no. We're *sweet* and XNFP Aries Dark Subculture- *innocent* evil bastards." friendly Internet Geek benno@netizen.com.au "Defend your joy" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue Feb 1 7:14:56 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from lunatic.oneinsane.net (lunatic.oneinsane.net [207.113.133.231]) by builder.freebsd.org (Postfix) with ESMTP id 2A3553DFC for ; Tue, 1 Feb 2000 07:14:53 -0800 (PST) Received: by lunatic.oneinsane.net (Postfix, from userid 1000) id E4FE718E; Tue, 1 Feb 2000 07:14:37 -0800 (PST) Date: Tue, 1 Feb 2000 07:14:37 -0800 From: Ron 'The InSaNe One' Rosson To: freebsd-mobile@freebsd.org Subject: Netgear FA410TXC Message-ID: <20000201071437.C38378@lunatic.oneinsane.net> Reply-To: Ron Rosson Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0i X-Operating-System: FreeBSD lunatic.oneinsane.net 3.4-STABLE X-Moon: The Moon is Waning Crescent (14% of Full) X-Opinion: What you read here is my IMHO X-Disclaimer: I am a firm believer in RTFM X-WWW: http://www.oneinsane.net X-PGP-KEY: http://www.oneinsane.net/~insane/insane2-pgp5i.txt X-Uptime: 7:11AM up 14 days, 15:38, 2 users, load averages: 0.03, 0.15, 0.09 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I am having a hell of a time getting this card to switch to 100baseTx and changing it to FULL under 3.3-RELEASE+PAO Here is what I do: ifconfig ed0 media 100baseTX ifconfig: SIOCGIFMEDIA: Invalid argument ifconfig ed0 mediaopt full-duplex ifconfig: SIOCGIFMEDIA: Invalid argument Here is the output of ifconfig ed0 ed0: flags=8843 mtu 1500 Any ideas? TIA -- ------------------------------------------------------------------- Ron Rosson ... and a UNIX user said ... The InSaNe One rm -rf * insane@oneinsane.net and all was /dev/null and *void() ------------------------------------------------------------------- Science is the game we play with God to find out what His rules are. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue Feb 1 8: 3:21 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from polaris.we.lc.ehu.es (polaris.we.lc.ehu.es [158.227.6.43]) by builder.freebsd.org (Postfix) with ESMTP id A5B463E1D; Tue, 1 Feb 2000 08:02:57 -0800 (PST) Received: from we.lc.ehu.es (v-ger [158.227.6.179]) by polaris.we.lc.ehu.es (8.9.1/8.9.1) with ESMTP id RAA26049; Tue, 1 Feb 2000 17:01:23 +0100 (MET) Message-ID: <38970354.56AD3D1@we.lc.ehu.es> Date: Tue, 01 Feb 2000 17:01:24 +0100 From: "Jose M. Alcaide" Organization: Universidad del =?iso-8859-1?Q?Pa=EDs?= Vasco - Dpto. de Electricidad y =?iso-8859-1?Q?Electr=F3nica?= X-Mailer: Mozilla 4.7 [en] (X11; U; FreeBSD 3.4-RELEASE i386) X-Accept-Language: es-ES, es, en-US, en MIME-Version: 1.0 To: Scott Mitchell Cc: freebsd-mobile@FreeBSD.ORG, freebsd-hackers@FreeBSD.ORG, freebsd-xircom@lovett.com Subject: Re: clk0 interrupt accounting weirdness ??? References: <20000130135129.F1158@lungfish.freeserve.co.uk> Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Scott Mitchell wrote: > > The attached thread (apologies for the volume of text, but it is all > relevant) came up on freebsd-xircom last week. Jose Alcaide actually > posted to -mobile on the same subject a week or so before, but got no > response. We figure it's definitely nothing to do with the Xircom driver > in particular and probably nothing to do with pccard, so I'm bouncing it to > any interested kernel gurus. > > Essentially, the irq line to which clk0 interrupts are accounted (in the > output from vmstat -i) changes when pccards are inserted/removed. The same > effect has been seen with cards using the xe0 and ed0 drivers. > After searching __again__ (and deeper) the mail list archives, I found that this problem is old. Very, very old. Of all messages I found related to this problem, the more interesting (and "recent": 1998-11-29) ones are: http://www.FreeBSD.org/cgi/getmsg.cgi?fetch=43676+50452+/usr/local/www/db/text/1998/freebsd-mobile/19981129.freebsd-mobile and its follow up by Nate Williams: http://www.freebsd.org/cgi/getmsg.cgi?fetch=50452+0+/usr/local/www/db/text/1998/freebsd-mobile/19981129.freebsd-mobile Here is an excerpt: ------------- > > - pccard interrupts doesn't seem to get initialized correctly for statistics > > output (vmstat -i). After I insert a pccard, all of its interrupts get > > accounted for the clock interrupt, with the irq line of the clock interrupt > > changing to the one for the PCCard. > > This is a 'known bug', and requires a re-write of the way PCCARD probing > is done to fix it. (This rewrite would also fix a number of other bugs > as well, but there is no one interested in taking on the laptop issue to > completion.) ------------- Well, I read pccard.c and the calls to register_intr() -which I traced- look correct. I did not find anything bad with IRQ probing, but this does not mean that the problem does not exist :-) Maybe a more detailed explanation by a kernel guru ;-) could help some of us to solve the problem. -- JMA ----------------------------------------------------------------------- José Mª Alcaide | mailto:jose@we.lc.ehu.es Universidad del País Vasco | mailto:jmas@FreeBSD.org Dpto. de Electricidad y Electrónica | http://www.we.lc.ehu.es/~jose Facultad de Ciencias - Campus de Lejona | Tel.: +34-946012479 48940 Lejona (Vizcaya) - SPAIN | Fax: +34-946013071 ----------------------------------------------------------------------- "Beware of Programmers who carry screwdrivers" -- Leonard Brandwein To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue Feb 1 8:11:59 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from moek.pir.net (moek.pir.net [209.192.237.190]) by builder.freebsd.org (Postfix) with ESMTP id AFB0A3DFC for ; Tue, 1 Feb 2000 08:11:50 -0800 (PST) Received: from pir by moek.pir.net with local (Exim) id 12Ffu0-0001aH-00 for freebsd-mobile@freebsd.org; Tue, 01 Feb 2000 11:11:40 -0500 Date: Tue, 1 Feb 2000 11:11:39 -0500 From: Peter Radcliffe To: freebsd-mobile@freebsd.org Subject: duplex and 10/100 problems with ed and others (Re: Netgear FA410TXC) Message-ID: <20000201111139.B5633@pir.net> Mail-Followup-To: freebsd-mobile@freebsd.org References: <20000201071437.C38378@lunatic.oneinsane.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <20000201071437.C38378@lunatic.oneinsane.net>; from insane@lunatic.oneinsane.net on Tue, Feb 01, 2000 at 07:14:37AM -0800 X-fish: < Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Ron 'The InSaNe One' Rosson probably said: > ifconfig ed0 media 100baseTX > ifconfig: SIOCGIFMEDIA: Invalid argument > ifconfig ed0 mediaopt full-duplex > ifconfig: SIOCGIFMEDIA: Invalid argument From my similar problems with an ed card that I was trying to switch to full duplex I believe that the ed driver doesn't support doing this. Hopefully I'm wrong or this may change, but the lack of ability to switch these manually (or even autonegotiate properly when the same machine and cards negotiates properly with 'doze :( ) caused me no end of problems. Are there any pcmcia 10/100 cards supported by PAO that use a driver you can force if the negotiation doesn't work properly ? Anyone I can talk to about getting the ed driver to support the things several of us seem to want ? :/ P. -- pir pir@pir.net pir@net.tufts.edu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue Feb 1 8:34:51 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from moek.pir.net (moek.pir.net [209.192.237.190]) by builder.freebsd.org (Postfix) with ESMTP id 1A9E73EBA for ; Tue, 1 Feb 2000 08:34:33 -0800 (PST) Received: from pir by moek.pir.net with local (Exim) id 12FgFq-0001hd-00 ; Tue, 01 Feb 2000 11:34:14 -0500 Date: Tue, 1 Feb 2000 11:34:13 -0500 From: Peter Radcliffe To: pao-report@clave.gr.jp Cc: freebsd-mobile@freebsd.org Subject: New card: card "SiliconTech,Inc\." "[0-9]*MB Compact PC Card" Message-ID: <20000201113413.A6333@pir.net> Mail-Followup-To: pao-report@clave.gr.jp, freebsd-mobile@freebsd.org Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i X-fish: < Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I found a 16Mb compactflash card in a pcmcia adaptor. Labelled "Simple technology 16Mb". Seems to work well; Feb 1 11:27:20 disapp pccardd[370]: Card "SiliconTech,Inc."("16MB Compact PC Card") [Ver 3.0] [(null)] matched "SiliconTech,Inc\." ("[0-9]*MB Compact PC Card") [(null)] [(null)] card0: assign wdc1 iobase 0x260 irq 7 wdc1: unit 0 (wd1): wd1: 15MB (31488 sectors), 246 cyls, 4 heads, 32 S/T, 512 B/S wdc1: unloading -- done It expects iobase of 0x260 and cardio doesn't seem to change it :/ so I changed the base of my SanDisk flash to match and changed my kernel config so they could use the same IDE controller. controller wdc1 at isa? disable port 0x260 bio irq ? disk wd1 at wdc1 drive 0 Are there any plans to automate this ? It's kinda fugly to show people who are used to windows dealing with flash ATA :/ ------------------------- pccard.conf ------------------------- card "SiliconTech,Inc\." "[0-9]*MB Compact PC Card" config 0x1 "wdc1" any insert logger -s SiliconTech Flash ATA inserted remove logger -s SiliconTech Flash ATA removed --------------------------------------------------------------- ------------------------ dumpcis output ----------------------- Configuration data for card in slot 0 Tuple #1, code = 0x1 (Common memory descriptor), length = 4 000: df 4a 01 ff Common memory device information: Device number 1, type Function specific, WPS = ON Speed = 4.0 x 100 ns, Memory block size = reserved, 32 units Device number 2, type No device, WPS = OFF Speed = No speed, Memory block size = 512b, 1 units Tuple #2, code = 0x1c (Other conditions for common memory), length = 4 000: 02 d9 01 ff (3V card) Tuple #3, code = 0x18 (JEDEC descr for common memory), length = 2 000: df 01 Tuple #4, code = 0x20 (Manufacturer ID), length = 4 000: 4d 01 01 00 PCMCIA ID = 0x14d, OEM ID = 0x1 Tuple #5, code = 0x15 (Version 1 info), length = 49 000: 04 01 53 69 6c 69 63 6f 6e 54 65 63 68 2c 49 6e 010: 63 2e 00 31 36 4d 42 20 43 6f 6d 70 61 63 74 20 020: 50 43 20 43 61 72 64 00 56 65 72 20 33 2e 30 00 030: ff Version = 4.1, Manuf = [SiliconTech,Inc.], card vers = [16MB Compact PC Card] Addit. info = [Ver 3.0] Tuple #6, code = 0x21 (Functional ID), length = 2 000: 04 01 Fixed disk card - POST initialize Tuple #7, code = 0x22 (Functional EXT), length = 2 000: 01 01 Disk interface: IDE Tuple #8, code = 0x22 (Functional EXT), length = 3 000: 02 0c 0f Disk features: Silicon, Unique, Single Sleep, Standby, Idle, Low power, Tuple #9, code = 0x1a (Configuration map), length = 5 000: 01 03 00 02 0f Reg len = 2, config register addr = 0x200, last config = 0x3 Registers: XXXX---- Tuple #10, code = 0x1b (Configuration entry), length = 8 000: c0 40 a1 01 55 08 00 20 Config index = 0x0(default) Interface byte = 0x40 (memory) +RDY/-BSY active Vcc pwr: Nominal operating supply voltage: 5 x 1V Memory space length = 0x8 Max twin cards = 0 Misc attr: (Power down supported) Tuple #11, code = 0x1b (Configuration entry), length = 6 000: 00 01 21 b5 1e 4d Config index = 0x0 Vcc pwr: Nominal operating supply voltage: 3 x 1V, ext = 0x1e Max current average over 10 ms: 4.5 x 10mA Tuple #12, code = 0x1b (Configuration entry), length = 10 000: c1 41 99 01 55 64 f0 ff ff 20 Config index = 0x1(default) Interface byte = 0x41 (I/O) +RDY/-BSY active Vcc pwr: Nominal operating supply voltage: 5 x 1V Card decodes 4 address lines, full 8/16 Bit I/O IRQ modes: Level, Pulse, Shared IRQs: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Max twin cards = 0 Misc attr: (Power down supported) Tuple #13, code = 0x1b (Configuration entry), length = 6 000: 01 01 21 b5 1e 4d Config index = 0x1 Vcc pwr: Nominal operating supply voltage: 3 x 1V, ext = 0x1e Max current average over 10 ms: 4.5 x 10mA Tuple #14, code = 0x1b (Configuration entry), length = 15 000: c2 41 99 01 55 ea 61 f0 01 07 f6 03 01 ee 20 Config index = 0x2(default) Interface byte = 0x41 (I/O) +RDY/-BSY active Vcc pwr: Nominal operating supply voltage: 5 x 1V Card decodes 10 address lines, full 8/16 Bit I/O I/O address # 1: block start = 0x1f0 block length = 0x8 I/O address # 2: block start = 0x3f6 block length = 0x2 IRQ modes: Level, Pulse, Shared IRQ level = 14 Max twin cards = 0 Misc attr: (Power down supported) Tuple #15, code = 0x1b (Configuration entry), length = 6 000: 02 01 21 b5 1e 4d Config index = 0x2 Vcc pwr: Nominal operating supply voltage: 3 x 1V, ext = 0x1e Max current average over 10 ms: 4.5 x 10mA Tuple #16, code = 0x1b (Configuration entry), length = 15 000: c3 41 99 01 55 ea 61 70 01 07 76 03 01 ee 20 Config index = 0x3(default) Interface byte = 0x41 (I/O) +RDY/-BSY active Vcc pwr: Nominal operating supply voltage: 5 x 1V Card decodes 10 address lines, full 8/16 Bit I/O I/O address # 1: block start = 0x170 block length = 0x8 I/O address # 2: block start = 0x376 block length = 0x2 IRQ modes: Level, Pulse, Shared IRQ level = 14 Max twin cards = 0 Misc attr: (Power down supported) Tuple #17, code = 0x1b (Configuration entry), length = 6 000: 03 01 21 b5 1e 4d Config index = 0x3 Vcc pwr: Nominal operating supply voltage: 3 x 1V, ext = 0x1e Max current average over 10 ms: 4.5 x 10mA Tuple #18, code = 0x14 (No link), length = 0 Tuple #19, code = 0xff (Terminator), length = 0 1 slots found --------------------------------------------------------------- -- pir pir@pir.net pir@net.tufts.edu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue Feb 1 8:45:19 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from moek.pir.net (moek.pir.net [209.192.237.190]) by builder.freebsd.org (Postfix) with ESMTP id B7D494634 for ; Tue, 1 Feb 2000 08:39:55 -0800 (PST) Received: from pir by moek.pir.net with local (Exim) id 12FgLB-0001ib-00 ; Tue, 01 Feb 2000 11:39:45 -0500 Date: Tue, 1 Feb 2000 11:39:45 -0500 From: Peter Radcliffe To: pao-report@clave.gr.jp Cc: freebsd-mobile@freebsd.org Subject: Re: New card: card "SiliconTech,Inc\." "[0-9]*MB Compact PC Card" Message-ID: <20000201113945.C6333@pir.net> Mail-Followup-To: pao-report@clave.gr.jp, freebsd-mobile@freebsd.org References: <20000201113413.A6333@pir.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <20000201113413.A6333@pir.net>; from pir@pir.net on Tue, Feb 01, 2000 at 11:34:13AM -0500 X-fish: < Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Knew I'd forget something. FreeBSD disapp 3.4-RELEASE I'm using FreeBSD 3.3/4 + PAO cvsupped 2000/01/31 (the 3/4 is because PAO of that cvsup gives a 3.4-R based kernel and I havn't ugraded userland from 3.3-R to match yet). Peter Radcliffe probably said: > ------------------------- pccard.conf ------------------------- > card "SiliconTech,Inc\." "[0-9]*MB Compact PC Card" > config 0x1 "wdc1" any > insert logger -s SiliconTech Flash ATA inserted > remove logger -s SiliconTech Flash ATA removed > --------------------------------------------------------------- -- pir pir@pir.net pir@net.tufts.edu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue Feb 1 17:10:57 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from rover.village.org (rover.village.org [204.144.255.49]) by builder.freebsd.org (Postfix) with ESMTP id 1294B3FDD for ; Tue, 1 Feb 2000 17:10:54 -0800 (PST) Received: from harmony.village.org (harmony.village.org [10.0.0.6]) by rover.village.org (8.9.3/8.9.3) with ESMTP id SAA10089; Tue, 1 Feb 2000 18:10:46 -0700 (MST) (envelope-from imp@harmony.village.org) Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id SAA17633; Tue, 1 Feb 2000 18:11:07 -0700 (MST) Message-Id: <200002020111.SAA17633@harmony.village.org> To: Kevin Leung Subject: Re: Q: does anyone have a fix to get OZ6832 PCMCIA CardBus bridge chip working under FreeBSD 3.4R Cc: freebsd-mobile@FreeBSD.ORG In-reply-to: Your message of "Mon, 31 Jan 2000 23:58:27 PST." References: Date: Tue, 01 Feb 2000 18:11:07 -0700 From: Warner Losh Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In message Kevin Leung writes: : I am having trouble getting the O2Micro OZ6832 PCMCIA CardBus : bridge chip on a Thinkpad working under FreeBSD 3.4R. dmesg output please? Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue Feb 1 17:39:56 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from mail2.digital.com (mail2.digital.com [204.123.2.56]) by builder.freebsd.org (Postfix) with ESMTP id 1FE143FCC for ; Tue, 1 Feb 2000 17:39:53 -0800 (PST) Received: from pobox1.pa.dec.com (pobox1.pa.dec.com [16.1.240.19]) by mail2.digital.com (8.9.2/8.9.3/WV2.0h) with SMTP id RAA27891; Tue, 1 Feb 2000 17:39:41 -0800 (PST) Received: from padc22.pa.dec.com by pobox1.pa.dec.com (5.65v3.2/1.1.10.5/07Nov97-1157AM) id AA02513; Tue, 1 Feb 2000 17:39:41 -0800 Received: from localhost by padc22.pa.dec.com (8.8.8/1.1.10.5/07Nov97-1157AM) id RAA05630; Tue, 1 Feb 2000 17:39:40 -0800 (PST) Date: Tue, 1 Feb 2000 17:39:40 -0800 (PST) From: Kevin Leung To: Warner Losh Cc: Kevin Leung , freebsd-mobile@FreeBSD.ORG Subject: Re: Q: does anyone have a fix to get OZ6832 PCMCIA CardBus bridge chip working under FreeBSD 3.4R In-Reply-To: <200002020111.SAA17633@harmony.village.org> Message-Id: Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I got the PCMCIA to work, I followed one of the posters here response of disabling CardBus inteh BIOS and it now works. -Kevin On Tue, 1 Feb 2000, Warner Losh wrote: > In message Kevin Leung writes: > : I am having trouble getting the O2Micro OZ6832 PCMCIA CardBus > : bridge chip on a Thinkpad working under FreeBSD 3.4R. > > dmesg output please? > > Warner > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue Feb 1 17:50:40 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from rover.village.org (rover.village.org [204.144.255.49]) by builder.freebsd.org (Postfix) with ESMTP id 242923D70 for ; Tue, 1 Feb 2000 17:50:37 -0800 (PST) Received: from harmony.village.org (harmony.village.org [10.0.0.6]) by rover.village.org (8.9.3/8.9.3) with ESMTP id SAA10224; Tue, 1 Feb 2000 18:50:30 -0700 (MST) (envelope-from imp@harmony.village.org) Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id SAA17959; Tue, 1 Feb 2000 18:50:52 -0700 (MST) Message-Id: <200002020150.SAA17959@harmony.village.org> To: Kevin Leung Subject: Re: Q: does anyone have a fix to get OZ6832 PCMCIA CardBus bridge chip working under FreeBSD 3.4R Cc: Kevin Leung , freebsd-mobile@FreeBSD.ORG In-reply-to: Your message of "Tue, 01 Feb 2000 17:39:40 PST." References: Date: Tue, 01 Feb 2000 18:50:52 -0700 From: Warner Losh Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In message Kevin Leung writes: : I got the PCMCIA to work, I followed one of the posters here : response of disabling CardBus inteh BIOS and it now works. OK. Sounds good. Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 2 1: 0:13 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from freebsd.dk (freebsd.dk [212.242.42.178]) by builder.freebsd.org (Postfix) with ESMTP id 12D743F40 for ; Wed, 2 Feb 2000 01:00:11 -0800 (PST) Received: (from sos@localhost) by freebsd.dk (8.9.3/8.9.1) id KAA43405 for mobile@freebsd.org; Wed, 2 Feb 2000 10:00:04 +0100 (CET) (envelope-from sos) From: Soren Schmidt Message-Id: <200002020900.KAA43405@freebsd.dk> Subject: Diamond homefree wireless anybody?? To: mobile@freebsd.org Date: Wed, 2 Feb 2000 10:00:04 +0100 (CET) X-Mailer: ELM [version 2.4ME+ PL54 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org anybody have experience with those, can we use them ? -Søren To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 2 4:11:28 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from mailgate.Cadence.COM (mailgate.Cadence.COM [158.140.2.1]) by builder.freebsd.org (Postfix) with ESMTP id A1DFB3FB2 for ; Wed, 2 Feb 2000 04:11:26 -0800 (PST) Received: from symnt3.Cadence.COM (symnt3.Cadence.COM [194.32.101.100]) by mailgate.Cadence.COM (8.9.3/8.9.3) with ESMTP id EAA20445 for ; Wed, 2 Feb 2000 04:10:30 -0800 (PST) Message-Id: <200002021210.EAA20445@mailgate.Cadence.COM> Received: from pc287-cam.cadence.com ([194.32.96.83]) by symnt3.Cadence.COM with SMTP (Microsoft Exchange Internet Mail Service Version 5.5.2650.21) id DT71W450; Wed, 2 Feb 2000 12:09:54 -0000 Comments: Authenticated sender is From: "Duncan Barclay" To: freebsd-mobile@freebsd.org Date: Wed, 2 Feb 2000 12:10:23 +0000 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: Webgear wireless LAN Reply-To: dmlb@ragnet.demon.co.uk X-mailer: Pegasus Mail for Win32 (v2.53/R1) X-Received: By mailgate.Cadence.COM as EAA20445 at Wed Feb 2 04:10:30 2000 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi Anyone tried these cards out? The 2Mb/s cards are $139 for a pair at compUSA and Webgear provide a Linux (GPL) driver. They are based on Raytheons Raylan cards. I'm going to pick up a few cards and try and try to get them to work. This will involve writing a driver - but if I don't succeed then they will be useful at work as we design various wireless LAN kit. Can anyone can tell me how much and where to buy Lucent/NEC WaveLan cards in San Francisco? I'm coming over from the UK for a conference next week. Duncan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 2 5:13:14 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from blackhelicopters.org (geburah.blackhelicopters.org [209.69.178.18]) by builder.freebsd.org (Postfix) with ESMTP id 78EC53F90 for ; Wed, 2 Feb 2000 05:12:58 -0800 (PST) Received: (from mwlucas@localhost) by blackhelicopters.org (8.9.3/8.9.3) id IAA31574 for mobile@freebsd.org; Wed, 2 Feb 2000 08:12:50 -0500 (EST) (envelope-from mwlucas) From: Michael Lucas Message-Id: <200002021312.IAA31574@blackhelicopters.org> Subject: network card for 4.0 To: mobile@freebsd.org Date: Wed, 2 Feb 2000 08:12:50 -0500 (EST) X-Mailer: ELM [version 2.4ME+ PL43 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Now that 4.0 is leering around the corner at us, I'd like to install/test it on my laptop. Can anyone recommend a good network card that's still supported in 4.0? I understand the ne2k-clones are generally safe... anyone recommend a particular one? I'd like one that can still be ordered somewhere. ;) Thanks, ==ml To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 2 5:55:50 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from rectorat.ac-toulouse.fr (rectorat.ac-toulouse.fr [194.254.31.193]) by builder.freebsd.org (Postfix) with ESMTP id 421E2404D for ; Wed, 2 Feb 2000 05:55:41 -0800 (PST) Received: from alex.titine.fr.eu.org ([194.254.31.185]) by rectorat.ac-toulouse.fr (8.8.8/8.8.8) with ESMTP id OAA29160 for ; Wed, 2 Feb 2000 14:55:24 +0100 (MET) Received: by alex.titine.fr.eu.org (Postfix, from userid 1000) id 9BA3F5D238; Wed, 2 Feb 2000 14:55:21 +0100 (CET) To: mobile@FreeBSD.ORG Subject: Re: network card for 4.0 References: <200002021312.IAA31574@blackhelicopters.org> From: Eric Jacoboni Date: 02 Feb 2000 14:55:21 +0100 In-Reply-To: Michael Lucas's message of "Wed, 2 Feb 2000 08:12:50 -0500 (EST)" Message-ID: <87snzbu2t2.fsf@alex.titine.fr.eu.org> Lines: 11 User-Agent: Gnus/5.0803 (Gnus v5.8.3) XEmacs/21.1 (Bryce Canyon) MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Michael Lucas writes: > Can anyone recommend a good network card that's still supported in > 4.0? I understand the ne2k-clones are generally safe... anyone > recommend a particular one? I have a D-LINK 660CT... Works like a charm, and very cheap too ;-) -- Eric Jacoboni Ta mère, son mot de passe c'est « toto » ! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 2 7: 4:17 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from ns.skylink.it (ns.skylink.it [194.177.113.1]) by builder.freebsd.org (Postfix) with ESMTP id 86E7D4047 for ; Wed, 2 Feb 2000 07:04:09 -0800 (PST) Received: from kim.ispra.webweaving.org (va-187.skylink.it [194.185.55.187]) by ns.skylink.it (8.9.1/8.8.8) with ESMTP id QAA19025 for ; Wed, 2 Feb 2000 16:05:33 +0100 Received: from webweaving.org (burly.ispra.webweaving.org [10.0.0.21]) by kim.ispra.webweaving.org (8.8.8/8.8.5) with ESMTP id PAA10455 for ; Wed, 2 Feb 2000 15:03:24 GMT X-Passed: MX on Ispra.WebWeaving.org Wed, 2 Feb 2000 15:03:24 GMT and masked X-No-Spam: Neither the receipients nor the senders email address(s) are to be used for Unsolicited (Commercial) Email without the explicit written consent of either party; as a per-message fee is incurred for inbound and outbound traffic to the originator. Posted-Date: Wed, 2 Feb 2000 15:03:24 GMT Message-ID: <3898473C.9C5B9D4C@webweaving.org> Date: Wed, 02 Feb 2000 16:03:23 +0100 From: Dirk-Willem van Gulik Reply-To: dirkx@webweaving.org Organization: WebWeaving Consultancy X-Mailer: Mozilla 4.7 (Macintosh; I; PPC) X-Accept-Language: en MIME-Version: 1.0 To: mobile@freebsd.org Subject: BayStack 660 wireless card Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Apparently to get the BayStack 660 wirelss card to work with Onoe's most recent awi0 driver (and perhaps be able to talk the the Airport base station, the ultimate goal) I need to upgrade the 3.21 firmware to 3.40. There is some util at the nortelsite which should let you do it. The thing is.. it hangs. And I've tried 2 different laptop's and one isa/pcmcia adaptor, and 2 different 660 cards. All give the same hang. Has _any_one_ ever used their 'asp_v340.exe' 'ASPFLASH.exe' util with success ? And if so on what hardware ? (Since Bay is taken over by Nortel, support is rather.... nonexistent :-(). Txs, Dw. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 2 7:24:19 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from moran.grauel.com (usr1-19.mintel.net [63.81.123.34]) by builder.freebsd.org (Postfix) with ESMTP id A2EF84074 for ; Wed, 2 Feb 2000 07:23:54 -0800 (PST) Received: (from rjk@localhost) by moran.grauel.com (8.9.3/8.9.3) id KAA02462; Wed, 2 Feb 2000 10:23:46 -0500 (EST) (envelope-from rjk) From: Richard J Kuhns MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <14488.19458.180836.204176@localhost.grauel.com> Date: Wed, 2 Feb 2000 10:23:46 -0500 (EST) To: freebsd-mobile@freebsd.org Subject: FreeBSD 3.4 and Linksys ethernet card X-Mailer: VM 6.75 under 21.1 (patch 8) "Bryce Canyon" XEmacs Lucid Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hello. I'm having some fairly major problems with 3.4 on my laptop, and I'd really appreciate it if anyone could offer some suggestions. I was running 3.3-PAO until yesterday, but I had hopes that I'd be able to use `straight' -stable and so installed 3.4. As far as I can tell, everything is fine EXCEPT with my Linksys Combo PCMCIA EthernetCard (model EC2T). I performed the upgrade from 3.3-PAO by removing /usr/src, installing the sources fresh from the 3.4 CD, and doing a `make buildworld; make installworld'. I then built a new kernel (I based my kernel config file on the new GENERIC and LINT) and ran mergemaster. Everything looks fine, but when I insert the Linksys card I get the message "driver allocation failed for Linksys" on the console. I noticed that pccard.conf.sample (which I copied to pccard.conf) said to remove irq 5 from the list of available irqs if I have a builtin sound card. I do, so I did, but it made no difference. Following are extracts from my config file and dmesg output; any additional info will be supplied on request. Thanks for any help. Kernel config file: === controller pnp0 ... device apm0 at isa? controller card0 device pcic0 at card? device pcic1 at card? options PCIC_RESUME_RESET ... device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 === dmesg: === FreeBSD 3.4-RELEASE #0: Tue Feb 1 19:46:32 EST 2000 rjk@molap.grauel.com:/usr/src/sys/compile/MOLAP Timecounter "i8254" frequency 1193182 Hz CPU: Celeron (297.79-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x66a Stepping = 10 Features=0x187f9ff,MMX,FXSR> real memory = 67043328 (65472K bytes) avail memory = 62390272 (60928K bytes) Preloaded elf kernel "kernel" at 0xc029b000. Preloaded elf module "linux.ko" at 0xc029b09c. Pentium Pro MTRR support enabled Probing for devices on PCI bus 0: chip0: rev 0x03 on pci0.0.0 chip1: rev 0x03 on pci0.1.0 chip2: rev 0x02 on pci0.7.0 ide_pci0: rev 0x01 on pci0.7.1 chip3: rev 0x02 on pci0.7.3 chip4: rev 0x00 int a irq 255 on pci0.12.0 chip5: rev 0x00 int a irq 255 on pci0.12.1 Probing for devices on PCI bus 1: vga0: rev 0xdc int a irq 9 on pci1.0.0 Probing for PnP devices: Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> ed0 not found at 0x280 pcm0 not found atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 irq 12 on isa psm0: model Generic PS/2 mouse, device ID 0 sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): wd0: 6194MB (12685680 sectors), 13424 cyls, 15 heads, 63 S/T, 512 B/S wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 0 (atapi): , removable, accel, dma, iordis acd0: drive speed 4134KB/sec, 128KB cache acd0: supported read types: CD-R, CD-RW, CD-DA acd0: Audio: play, 16 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked ppc0 at 0x378 irq 7 on isa ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppi0: on ppbus 0 plip0: on ppbus 0 vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface apm0 on isa apm: found APM BIOS version 1.2 PC-Card VLSI 82C146 (5 mem & 2 I/O windows) pcic: controller irq 5 Initializing PC-card drivers: sio ed changing root device to wd0s1a -- Richard Kuhns rjk@grauel.com PO Box 6249 Tel: (765)477-6000 \ 100 Sawmill Road x319 Lafayette, IN 47903 (800)489-4891 / To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 2 7:48:45 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from moek.pir.net (moek.pir.net [209.192.237.190]) by builder.freebsd.org (Postfix) with ESMTP id 3D335406B for ; Wed, 2 Feb 2000 07:48:38 -0800 (PST) Received: from pir by moek.pir.net with local (Exim) id 12G21B-0001NM-00 for freebsd-mobile@freebsd.org; Wed, 02 Feb 2000 10:48:33 -0500 Date: Wed, 2 Feb 2000 10:48:33 -0500 From: Peter Radcliffe To: freebsd-mobile@freebsd.org Subject: Re: FreeBSD 3.4 and Linksys ethernet card Message-ID: <20000202104833.A4486@pir.net> Mail-Followup-To: freebsd-mobile@freebsd.org References: <14488.19458.180836.204176@localhost.grauel.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <14488.19458.180836.204176@localhost.grauel.com>; from rjk@grauel.com on Wed, Feb 02, 2000 at 10:23:46AM -0500 X-fish: < Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Richard J Kuhns probably said: > I was running 3.3-PAO until yesterday, but I had hopes that I'd be able to > use `straight' -stable and so installed 3.4. I still don't see the pcmcia support in the bare releases as good enough. > As far as I can tell, everything is fine EXCEPT with my Linksys Combo > PCMCIA EthernetCard (model EC2T). Particularly for wierd cards like that :) > I performed the upgrade from 3.3-PAO by removing /usr/src, installing the > sources fresh from the 3.4 CD, and doing a `make buildworld; make > installworld'. I then built a new kernel (I based my kernel config file on > the new GENERIC and LINT) and ran mergemaster. Everything looks fine, but > when I insert the Linksys card I get the message "driver allocation failed > for Linksys" on the console. > Kernel config file: > === > device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 > === I'd change this to; ed0 at isa? port ? net irq ? disable > dmesg: > === > Initializing PC-card drivers: sio ed Odd. That looks fine. Do you get a message saying what it is trying to allocate for the card ? With 3.4-PAO I get; Card inserted, slot 0 card0: assign ep0 iobase 0x260 irq 7 ep0: utp/bnc[*UTP*] address 00:60:08:92:be:73 I did a binary 3.4-R upgrade on this laptop and then cvsup-ed PAO, which is now based on a 3.4-R kernel (in general I find the cvsuped PAO kernel less of a pain to maintain than the patching method). Seems to have worked quite well. P. -- pir pir@pir.net pir@net.tufts.edu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 2 7:48:59 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from moran.grauel.com (usr1-19.mintel.net [63.81.123.34]) by builder.freebsd.org (Postfix) with ESMTP id 274024092 for ; Wed, 2 Feb 2000 07:48:56 -0800 (PST) Received: (from rjk@localhost) by moran.grauel.com (8.9.3/8.9.3) id KAA02536; Wed, 2 Feb 2000 10:48:54 -0500 (EST) (envelope-from rjk) From: Richard J Kuhns MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <14488.20966.207622.724127@localhost.grauel.com> Date: Wed, 2 Feb 2000 10:48:54 -0500 (EST) To: freebsd-mobile@FreeBSD.ORG Subject: Re: FreeBSD 3.4 and Linksys ethernet card In-Reply-To: <14488.19458.180836.204176@localhost.grauel.com> References: <14488.19458.180836.204176@localhost.grauel.com> X-Mailer: VM 6.75 under 21.1 (patch 8) "Bryce Canyon" XEmacs Lucid Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I know I'm replying to my own message, but I thought it would be nice to get this in the mailing list archives. The solution was to explicitly set irq 10 (which is what I'd set in my kernel config file) in pccard.conf, rather than letting it float. Thanks to Sean O'Connell at Duke University for the answer. -- Richard Kuhns rjk@grauel.com PO Box 6249 Tel: (765)477-6000 \ 100 Sawmill Road x319 Lafayette, IN 47903 (800)489-4891 / To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 2 9:31:18 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from pooh.elsevier.nl (pooh.elsevier.nl [145.36.9.32]) by builder.freebsd.org (Postfix) with ESMTP id D680240BC for ; Wed, 2 Feb 2000 09:30:55 -0800 (PST) Received: (from steve@localhost) by pooh.elsevier.nl (8.9.3/8.9.3) id RAA00725; Wed, 2 Feb 2000 17:25:38 GMT (envelope-from steve) Message-ID: X-Mailer: XFMail 1.4.0 on FreeBSD X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 In-Reply-To: <20000202104833.A4486@pir.net> Date: Wed, 02 Feb 2000 17:25:38 -0000 (GMT) From: "Steve O'Hara-Smith" To: Peter Radcliffe Subject: Re: FreeBSD 3.4 and Linksys ethernet card Cc: freebsd-mobile@freebsd.org Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On 02-Feb-00 Peter Radcliffe wrote: > I still don't see the pcmcia support in the bare releases as good enough. I have to be curious as to the shortcomings - it works fine for me. Granted that PAO supports more cards, but then I don't have any of them :) >> As far as I can tell, everything is fine EXCEPT with my Linksys Combo >> PCMCIA EthernetCard (model EC2T). > > Particularly for wierd cards like that :) PAO also does not support combo cards (or has that happened recently). To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 2 10:23:53 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from moek.pir.net (moek.pir.net [209.192.237.190]) by builder.freebsd.org (Postfix) with ESMTP id 3F74140C2 for ; Wed, 2 Feb 2000 10:23:51 -0800 (PST) Received: from pir by moek.pir.net with local (Exim) id 12G3u6-0002la-00 for freebsd-mobile@freebsd.org; Wed, 02 Feb 2000 12:49:22 -0500 Date: Wed, 2 Feb 2000 12:49:21 -0500 From: Peter Radcliffe To: freebsd-mobile@freebsd.org Subject: Re: FreeBSD 3.4 and Linksys ethernet card Message-ID: <20000202124921.H4486@pir.net> Mail-Followup-To: freebsd-mobile@freebsd.org References: <20000202104833.A4486@pir.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: ; from steveo@eircom.net on Wed, Feb 02, 2000 at 05:25:38PM -0000 X-fish: < Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Steve O'Hara-Smith probably said: > I have to be curious as to the shortcomings - it works fine for me. > Granted that PAO supports more cards, but then I don't have any of them :) There are occasions when I need to use a card I didn't expect to, so the extra card supprt is useful for me. Generally I find that the functionality is improved, although much of that has made it into 3.* more recently. Things like how the DHCP pcmcia interfaces are handled ... The non-PAO install also doesn't work on some laptops. > PAO also does not support combo cards (or has that happened recently). Theres only support for combo cards as one of their functions, as yet. P. -- pir pir@pir.net pir@net.tufts.edu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 2 11:47:54 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from mass.cdrom.com (ip46-106.eventsdigital.com [160.79.46.106]) by builder.freebsd.org (Postfix) with ESMTP id E18DC3FEF for ; Wed, 2 Feb 2000 11:47:51 -0800 (PST) Received: from mass.cdrom.com (localhost [127.0.0.1]) by mass.cdrom.com (8.9.3/8.9.3) with ESMTP id LAA00597; Wed, 2 Feb 2000 11:57:32 -0800 (PST) (envelope-from msmith@mass.cdrom.com) Message-Id: <200002021957.LAA00597@mass.cdrom.com> X-Mailer: exmh version 2.1.1 10/15/1999 To: Peter Radcliffe Cc: freebsd-mobile@freebsd.org Subject: Re: duplex and 10/100 problems with ed and others (Re: Netgear FA410TXC) In-reply-to: Your message of "Tue, 01 Feb 2000 11:11:39 EST." <20000201111139.B5633@pir.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Wed, 02 Feb 2000 11:57:26 -0800 From: Mike Smith Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > >From my similar problems with an ed card that I was trying to switch > to full duplex I believe that the ed driver doesn't support doing > this. > > Hopefully I'm wrong or this may change, but the lack of ability to > switch these manually (or even autonegotiate properly when the same > machine and cards negotiates properly with 'doze :( ) caused me no end > of problems. No, you're correct. There's no standard way to achieve this, and no documentation seems to be available on the various ways that the cards might do it. > Are there any pcmcia 10/100 cards supported by PAO that use a driver > you can force if the negotiation doesn't work properly ? Nope. Then again, I've _never_ been in a situation where I'd have needed to force the settings on the Netgear card I'm using, and I move it between a large number of hubs/switches. > Anyone I can talk to about getting the ed driver to support the things > several of us seem to want ? Find documentation, and the rest is simple. -- \\ Give a man a fish, and you feed him for a day. \\ Mike Smith \\ Tell him he should learn how to fish himself, \\ msmith@freebsd.org \\ and he'll hate you for a lifetime. \\ msmith@cdrom.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 2 21:16: 8 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from rover.village.org (rover.village.org [204.144.255.49]) by builder.freebsd.org (Postfix) with ESMTP id EE8AE423B for ; Wed, 2 Feb 2000 21:16:05 -0800 (PST) Received: from harmony.village.org (harmony.village.org [10.0.0.6]) by rover.village.org (8.9.3/8.9.3) with ESMTP id WAA15502; Wed, 2 Feb 2000 22:15:25 -0700 (MST) (envelope-from imp@harmony.village.org) Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id WAA10071; Wed, 2 Feb 2000 22:15:30 -0700 (MST) Message-Id: <200002030515.WAA10071@harmony.village.org> To: dmlb@ragnet.demon.co.uk Subject: Re: Webgear wireless LAN Cc: freebsd-mobile@FreeBSD.ORG In-reply-to: Your message of "Wed, 02 Feb 2000 12:10:23 GMT." <200002021210.EAA20445@mailgate.Cadence.COM> References: <200002021210.EAA20445@mailgate.Cadence.COM> Date: Wed, 02 Feb 2000 22:15:30 -0700 From: Warner Losh Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In message <200002021210.EAA20445@mailgate.Cadence.COM> "Duncan Barclay" writes: : I'm going to pick up a few cards and try and try to get them to work. : This will involve writing a driver - but if I don't succeed then they : will be useful at work as we design various wireless LAN kit. if_ray on NetBSD supports these. I plan on doing a driver after 4.0 freezes. Too much other stuff to do before the release. Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 2 23:12:23 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from c62443-a.frmt1.sfba.home.com (c62443-a.frmt1.sfba.home.com [24.0.69.165]) by builder.freebsd.org (Postfix) with ESMTP id 7259A4208 for ; Wed, 2 Feb 2000 23:12:21 -0800 (PST) Received: (from adsharma@localhost) by c62443-a.frmt1.sfba.home.com (8.9.3/8.9.3) id XAA31013; Wed, 2 Feb 2000 23:12:23 -0800 Date: Wed, 2 Feb 2000 23:12:23 -0800 From: Arun Sharma Message-Id: <200002030712.XAA31013@c62443-a.frmt1.sfba.home.com> To: sos@freebsd.dk Cc: mobile@freebsd.org Subject: Re: Diamond homefree wireless anybody?? In-Reply-To: <200002020900.KAA43405@freebsd.dk> References: <200002020900.KAA43405@freebsd.dk> Reply-To: adsharma@sharmas.dhs.org Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In muc.lists.freebsd.mobile, you wrote: > > anybody have experience with those, can we use them ? I know for a fact that Linux guys couldn't write a driver because Diamond didn't give them the hardware specs. -Arun To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Feb 3 10:34:40 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from anchor-post-32.mail.demon.net (anchor-post-32.mail.demon.net [194.217.242.90]) by builder.freebsd.org (Postfix) with ESMTP id 5CDAA3E2D for ; Thu, 3 Feb 2000 10:34:36 -0800 (PST) Received: from ragnet.demon.co.uk ([158.152.46.40]) by anchor-post-32.mail.demon.net with esmtp (Exim 2.12 #1) id 12GR1L-000BR1-0W; Thu, 3 Feb 2000 18:30:23 +0000 Received: from dmlb by ragnet.demon.co.uk with local (Exim 3.03 #1) id 12GGkx-000ESQ-00; Thu, 03 Feb 2000 07:32:47 +0000 Content-Length: 976 Message-ID: X-Mailer: XFMail 1.3 [p0] on FreeBSD X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 In-Reply-To: <200002030515.WAA10071@harmony.village.org> Date: Thu, 03 Feb 2000 07:32:47 -0000 (GMT) From: Duncan Barclay To: Warner Losh Subject: Re: Webgear wireless LAN Cc: freebsd-mobile@FreeBSD.ORG Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On 03-Feb-00 Warner Losh wrote: > In message <200002021210.EAA20445@mailgate.Cadence.COM> "Duncan Barclay" > writes: >: I'm going to pick up a few cards and try and try to get them to work. >: This will involve writing a driver - but if I don't succeed then they >: will be useful at work as we design various wireless LAN kit. > > if_ray on NetBSD supports these. I plan on doing a driver after 4.0 > freezes. Too much other stuff to do before the release. > > Warner That's great Warner. I'll try to get them working and pass whatever I end up with to you when you're ready. On a related note, do the FreeBSD WirelessLAN drivers speak to Windows boxes with the same card? Duncan --- ________________________________________________________________________ Duncan Barclay | God smiles upon the little children, dmlb@ragnet.demon.co.uk | the alcoholics, and the permanently stoned. ________________________________________________________________________ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Feb 3 12:35:38 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from rover.village.org (rover.village.org [204.144.255.49]) by builder.freebsd.org (Postfix) with ESMTP id B950F418F for ; Thu, 3 Feb 2000 12:35:30 -0800 (PST) Received: from harmony.village.org (harmony.village.org [10.0.0.6]) by rover.village.org (8.9.3/8.9.3) with ESMTP id LAA17499; Thu, 3 Feb 2000 11:48:16 -0700 (MST) (envelope-from imp@harmony.village.org) Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id LAA13170; Thu, 3 Feb 2000 11:48:28 -0700 (MST) Message-Id: <200002031848.LAA13170@harmony.village.org> To: Duncan Barclay Subject: Re: Webgear wireless LAN Cc: freebsd-mobile@FreeBSD.ORG In-reply-to: Your message of "Thu, 03 Feb 2000 07:32:47 GMT." References: Date: Thu, 03 Feb 2000 11:48:28 -0700 From: Warner Losh Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In message Duncan Barclay writes: : That's great Warner. I'll try to get them working and pass whatever I end : up with to you when you're ready. : : On a related note, do the FreeBSD WirelessLAN drivers speak to Windows boxes : with the same card? The NetBSD if_ray driver interoperates with windows boxes. I've not yet ported this driver. It needs similar work to the xircom driver but for more urgent reasons. Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Feb 3 17:13:42 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from sodium.network-alchemy.com (Sodium.Network-Alchemy.COM [199.46.17.134]) by builder.freebsd.org (Postfix) with ESMTP id 677A13D77 for ; Thu, 3 Feb 2000 17:13:41 -0800 (PST) Received: from sodium.network-alchemy.com (localhost.network-alchemy.com [127.0.0.1]) by sodium.network-alchemy.com (8.9.3/8.8.8) with ESMTP id RAA25578; Thu, 3 Feb 2000 17:13:53 -0800 (PST) (envelope-from key@sodium.network-alchemy.com) Message-Id: <200002040113.RAA25578@sodium.network-alchemy.com> To: freebsd-mobile@FreeBSD.ORG Cc: key@Network-Alchemy.COM Subject: Anyone using the IBM TP 390X with FreeBSD? Date: Thu, 03 Feb 2000 17:13:53 -0800 From: Ken Key Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi Folks, anyone using the IBM TP 390X with FreeBSD? If so, could you tell me know what the Cardbus controller chip is? Hopefully not an O2Micro like the i-series machines I've had come through. I can't find one to check out chipsets on. Thanks, Ken Key -- Ken Key (key@network-alchemy.com) Network Alchemy, Santa Cruz, CA To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Feb 3 19:15:57 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from oxygen.yy.ics.keio.ac.jp (oxygen.yy.ics.keio.ac.jp [131.113.47.3]) by builder.freebsd.org (Postfix) with ESMTP id AF2833D60 for ; Thu, 3 Feb 2000 19:15:53 -0800 (PST) Received: from lavender.yy.cs.keio.ac.jp (ppp169.dialup.st.keio.ac.jp [131.113.27.169]) by oxygen.yy.ics.keio.ac.jp (8.9.3+3.2W/3.7W) with ESMTP id MAA03573; Fri, 4 Feb 2000 12:16:03 +0900 (JST) (envelope-from sanpei@sanpei.org) Received: (from sanpei@localhost) by lavender.yy.cs.keio.ac.jp (8.9.3/3.7W) id MAA11246; Fri, 4 Feb 2000 12:15:48 +0900 (JST) Date: Fri, 4 Feb 2000 12:15:48 +0900 (JST) Message-Id: <200002040315.MAA11246@lavender.yy.cs.keio.ac.jp> To: key@Network-Alchemy.COM Cc: freebsd-mobile@FreeBSD.ORG, sanpei@sanpei.org Subject: Re: Anyone using the IBM TP 390X with FreeBSD? In-Reply-To: Your message of "Fri, 4 Feb 2000 10:13:53 JST". <200002040113.RAA25578@sodium.network-alchemy.com> From: sanpei@sanpei.org (MIHIRA Yoshiro) X-Mailer: mnews [version 1.21] 1997-12/23(Tue) Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org key@Network-Alchemy.COM Wrote: >> anyone using the IBM TP 390X with FreeBSD? If so, could you tell me >> know what the Cardbus controller chip is? Hopefully not an O2Micro >> like the i-series machines I've had come through. I can't find >> one to check out chipsets on. From Windows system property(?), 390X has ``Texas Instruments PCI-1251B CardBus Controller.'' Sorry I did not test PC-Card with FreeBSD. MIHIRA Yoshiro Yokohama, Japan. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Feb 4 6: 3:27 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from sawmill.grauel.com (sawmill.grauel.com [199.233.104.39]) by builder.freebsd.org (Postfix) with ESMTP id 4158E4146 for ; Fri, 4 Feb 2000 06:03:21 -0800 (PST) Received: (from rjk@localhost) by sawmill.grauel.com (8.9.3/8.8.8) id JAA16750; Fri, 4 Feb 2000 09:04:22 -0500 (EST) (envelope-from rjk) From: "Richard J. Kuhns" MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <14490.56422.239565.281827@sawmill.grauel.com> Date: Fri, 4 Feb 2000 09:04:22 -0500 (EST) To: freebsd-mobile@freebsd.org Subject: Laptop/Linksys Ethernet/FreeBSD 3.4 X-Mailer: VM 6.75 under 21.1 (patch 8) "Bryce Canyon" XEmacs Lucid Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Well, it looks like I spoke too soon earlier when I said it worked. After inserting the Linksys card I get Card inserted, slot 1 ed0: address 00:e0:98:07:52:2a, type NE2000 (16 bit) on the console (which is as far as I'd gone earlier when I said it worked), but any attempt to run ifconfig on ed0 produces a constant,steady beep, and the system is locked solid until I remove the card, at which time I get ed0: unload Return IRQ=10 Card removed, slot 1 Does anyone have anything I could/should try before cvsuping PAO? -- Richard Kuhns rjk@grauel.com PO Box 6249 Tel: (765)477-6000 \ 100 Sawmill Road x319 Lafayette, IN 47903 (800)489-4891 / To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Feb 4 7:23:48 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from probity.mcc.ac.uk (probity.mcc.ac.uk [130.88.200.94]) by builder.freebsd.org (Postfix) with ESMTP id CCBAD41A3 for ; Fri, 4 Feb 2000 07:23:44 -0800 (PST) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by probity.mcc.ac.uk with esmtp (Exim 1.92 #3) for mobile@freebsd.org id 12GkaT-000LyU-00; Fri, 4 Feb 2000 15:23:57 +0000 Received: from localhost (jcm@localhost) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with ESMTP id PAA19306 for ; Fri, 4 Feb 2000 15:23:57 GMT (envelope-from jcm@dogma.freebsd-uk.eu.org) Date: Fri, 4 Feb 2000 15:23:56 +0000 (GMT) From: Jonathon McKitrick To: mobile@freebsd.org Subject: suspend/resume on toshiba 4010cdt Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi all, i'm having a problem with my pcmcia modem card and the suspend/resume feature. Two questions, actually. First, i got my kernel config from someone else running the same machine, so it is a little different. When i try to use the original one, it doesn't work. Details: running 3.4 stable (no PAO) i *did* have the experimental APM option in the kernel, but that crashed on resuming even when ppp was not connected so i removed it. i'm trying to go from memory here, so i apologize if details are sketchy.... The serial config options for sio in my kernel are exactly the same as the ones in GENERIC. In the pccard.conf file, my card is configged for sio2, rather than 1 or 0. The odd thing is, if i change this to sio0 or sio1, and change the ppp.conf entry to cuaa0 or cuaa1, i get a bad file descriptor when dialing. Question 1: why when i change my pccard.conf from sio2 to sio0 or sio1 (like in the example file for the exact same card) does it give me a bad file descriptor error? Now on to #2. I finally got FreeBSD to recognize my card when resuming, but *only* when i am not connected. I recently had my battery go critical (i was trying to drain it for maintenance purposes) and so the computer suspended. When i plugged in to AC and restarted, it couldn't allocate the Toshiba card driver. Then, when i tried to reboot, i got a page fault deep inside ppp. Question 2: I realize i should close/quit ppp before shutdown, but if this is unavoidable, how can i prevent ppp from crashing on resuming? Better yet, how can i get the OS to reset the pccard modem on resuming so i can redial? -=> jm <=- "If you can't learn to do something well, learn to enjoy doing it poorly." To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Feb 4 7:24:29 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from probity.mcc.ac.uk (probity.mcc.ac.uk [130.88.200.94]) by builder.freebsd.org (Postfix) with ESMTP id DEA0541A3 for ; Fri, 4 Feb 2000 07:24:26 -0800 (PST) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by probity.mcc.ac.uk with esmtp (Exim 1.92 #3) for mobile@freebsd.org id 12GkbD-000Lyq-00; Fri, 4 Feb 2000 15:24:43 +0000 Received: from localhost (jcm@localhost) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with ESMTP id PAA19311 for ; Fri, 4 Feb 2000 15:24:43 GMT (envelope-from jcm@dogma.freebsd-uk.eu.org) Date: Fri, 4 Feb 2000 15:24:43 +0000 (GMT) From: Jonathon McKitrick To: mobile@freebsd.org Subject: suspend/resume on toshiba Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org One last thing: please cc reply, since i am not in this list -=> jm <=- "If you can't learn to do something well, learn to enjoy doing it poorly." To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Feb 4 19:44:10 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from cc942873-a.ewndsr1.nj.home.com (cc942873-a.ewndsr1.nj.home.com [24.2.89.207]) by builder.freebsd.org (Postfix) with ESMTP id AA76644F7 for ; Fri, 4 Feb 2000 19:44:05 -0800 (PST) Received: (from cjc@localhost) by cc942873-a.ewndsr1.nj.home.com (8.9.3/8.9.3) id WAA45698 for freebsd-mobile@freebsd.org; Fri, 4 Feb 2000 22:49:30 -0500 (EST) (envelope-from cjc) Date: Fri, 4 Feb 2000 22:49:30 -0500 From: "Crist J. Clark" To: freebsd-mobile@freebsd.org Subject: Install on DELL Latitude and Xircom CreditCard Ethernet Message-ID: <20000204224930.B44997@cc942873-a.ewndsr1.nj.home.com> Reply-To: cjclark@home.com Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0i Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I am trying to install FreeBSD 3.3 (PAO) on my DELL Latitude XPi over a network. The problem is that the kernel cannot seem to be able to find my card. The card is a Xircom CreditCard Ethernet IIps. In the Win98 that came on the HDD, the Ethernet card occupies IRQ 10 and I/O 0x110 and the PCMCIA slot is IRQ 15, I/O 0x3E0, and the range is 0D0000. Unfortunately, although I have this info, you can't configure the ex0 device in the kernel setup. I have two cards in the notebook, the Xircom and a Megahertz Modem XJ4336. I've swapped the cards and the modem is found when plugged into either slot, so I think the kernel negotiates the PCMCIA fine. What do I need to do to be able to use this Ethernet card during the install? Or am I doing something wrong. Other than the two cards, I think it's a fairly straight forward DELL Latitude with integrated sound and IR port sucking up IRQs, but there should be enough for both cards. Kinda frustrating. I was trying to do the install using a parallel port PPP setup between my notebook and tower last night to no avail. I figured once I got my Ethernet card it would be a breeze... Well... *sigh* Any help appreciated. -- Crist J. Clark cjclark@home.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat Feb 5 5:45:55 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from grom.mw.mil.pl (grom.mw.mil.pl [153.19.192.1]) by builder.freebsd.org (Postfix) with ESMTP id 499DC4494 for ; Sat, 5 Feb 2000 05:45:49 -0800 (PST) Received: from mw.mil.pl (centy.mw.mil.pl [153.19.192.9]) by grom.mw.mil.pl (8.9.3/8.9.3) with ESMTP id OAA77797 for ; Sat, 5 Feb 2000 14:50:18 +0100 (CET) (envelope-from pawel@mw.mil.pl) Message-ID: <389C29DD.66A9726B@mw.mil.pl> Date: Sat, 05 Feb 2000 14:47:09 +0100 From: Pawel Jaskorzynski X-Mailer: Mozilla 4.7 [en] (X11; I; FreeBSD 3.4-STABLE i386) X-Accept-Language: en MIME-Version: 1.0 To: "freebsd-mobile@FreeBSD.ORG" Subject: ATT Paradyne 14.4 modem, need help Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi all, I would like to make a use of my old ATT Paradyne KeepInTouch modem card. Well, it lookes like I am doing something wrong, or maybe the card is odder than I thought. Insertion and removal processes seem to work fine, but when I try to access the modem through cu, the machine freezes, and I get kernel panic, page fault while in kernel mode (or something like that). Could anyone give me a hint on what I am doing wrong, or maybe say that this card simply won't work? I am running 3.4-STABLE cvsupped aound the 10th of January. I enabled pccard stuff in the kernel, etc., this seems to work with my Xircom PS2 card (sort of, rather unusable, but works). i added the following entry to the /etc/pccard.conf: # AT&T Paradyne KeepInTouch 14.4 modem card "AT&T Paradyne" "KeepInTouch Card" config 0x23 "sio3" 9 insert echo ATT Paradyne 14.4 inserted remove echo ATT Paradyne 14.4 removed When I insert and remove the card, the kernel says: (insert card) Card inserted, slot 0 sio3: type 16550A (remove card) sio3: unload,gone Return IRQ=9 Card removed, slot 0 Slot 0, unfielded interrupt (0) The pccardc dumpcis output is: Configuration data for card in slot 0 Tuple #1, code = 0x1 (Common memory descriptor), length = 2 000: d1 00 Common memory device information: Device number 1, type Function specific, WPS = OFF Speed = 250nS, Memory block size = 512b, 1 units Tuple #2, code = 0x17 (Attribute memory descriptor), length = 2 000: 61 18 Attribute memory device information: Device number 1, type SRAM, WPS = OFF Speed = 250nS, Memory block size = 512b, 4 units Tuple #3, code = 0x15 (Version 1 info), length = 52 000: 04 01 41 54 26 54 20 50 61 72 61 64 79 6e 65 00 010: 4b 65 65 70 49 6e 54 6f 75 63 68 20 43 61 72 64 020: 00 33 37 36 31 20 20 20 00 43 30 31 2e 31 31 2e 030: 30 30 00 ff Version = 4.1, Manuf = [AT&T Paradyne],card vers = [KeepInTouch Card] Addit. info = [3761 ],[C01.11.00] Tuple #4, code = 0x20 (Manufacturer ID), length = 4 000: ff ff 00 01 PCMCIA ID = 0xffff, OEM ID = 0x100 Tuple #5, code = 0x21 (Functional ID), length = 2 000: 02 01 Serial port/modem - POST initialize Tuple #6, code = 0x22 (Functional EXT), length = 4 000: 00 02 0f 7f Serial interface extension: 16550 UART, Parity - Space,Mark,Odd,Even, Tuple #7, code = 0x22 (Functional EXT), length = 9 000: 01 1f 28 70 05 00 70 d0 00 Modem interface capabilities: Tuple #8, code = 0x22 (Functional EXT), length = 12 000: 02 00 06 1f 0c 03 03 1f 07 00 00 b5 Data modem services available: Tuple #9, code = 0x22 (Functional EXT), length = 8 000: 13 00 06 0e 00 22 00 b5 Tuple #10, code = 0x22 (Functional EXT), length = 8 000: 23 00 06 0e 00 22 00 b5 Tuple #11, code = 0x1a (Configuration map), length = 5 000: 01 23 e0 07 07 Reg len = 2, config register addr = 0x7e0, last config = 0x23 Registers: XXX----- Tuple #12, code = 0x1b (Configuration entry), length = 36 000: e0 c1 9e 7f 55 c5 4b d5 19 86 50 86 50 26 34 37 010: 8e 7d 86 0e 86 1a 35 35 e8 14 5f a3 60 f8 03 07 020: 30 bc 86 28 Config index = 0x20(default) Interface byte = 0xc1 (I/O) +RDY/-BSY active, wait signal supported Vcc pwr: Nominal operating supply voltage: 5 x 1V Minimum operating supply voltage: 4 x 1V, ext = 0x4b Maximum operating supply voltage: 5 x 1V, ext = 0x19 Continuous supply current: 1 x 100mA, ext = 0x50 Max current average over 1 second: 1 x 100mA, ext = 0x50 Max current average over 10 ms: 2 x 100mA Power down supply current: 3 x 1mA Vpp pwr: Nominal operating supply voltage: 1.2 x 10V, ext = 0x7d Minimum operating supply voltage: 1 x 10V, ext = 0xe Maximum operating supply voltage: 1 x 10V, ext = 0x1a Max current average over 1 second: 3 x 10mA Max current average over 10 ms: 3 x 10mA Wait scale Speed = 1.2 x 10 us RDY/BSY scale Speed = 1.2 x 10 us, scaled by 100 Card decodes 20 address lines IRQ modes: IRQs: BERR 2 4 8 9 10 11 12 14 Max twin cards = 0 Misc attr: (Power down supported) Tuple #13, code = 0x1b (Configuration entry), length = 7 000: 21 08 a3 60 f8 02 07 Config index = 0x21 Card decodes 3 address lines, 8 Bit I/O only I/O address # 1: block start = 0x2f8 block length = 0x8 Tuple #14, code = 0x1b (Configuration entry), length = 7 000: 22 08 a3 60 e8 03 07 Config index = 0x22 Card decodes 3 address lines, 8 Bit I/O only I/O address # 1: block start = 0x3e8 block length = 0x8 Tuple #15, code = 0x1b (Configuration entry), length = 7 000: 23 08 a3 60 e8 02 07 Config index = 0x23 Card decodes 3 address lines, 8 Bit I/O only I/O address # 1: block start = 0x2e8 block length = 0x8 Tuple #16, code = 0xff (Terminator), length = 0 2 slots found I have set sio3 in the kernel to io 0x2e8 and irq 9. I tried it both disabled and enabled in the kernel config (shouldn't matter, anyway), no difference. Thanks, Pawel To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat Feb 5 12:15:26 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from grom.mw.mil.pl (grom.mw.mil.pl [153.19.192.1]) by builder.freebsd.org (Postfix) with ESMTP id 9B6B746A8 for ; Sat, 5 Feb 2000 12:15:18 -0800 (PST) Received: from mw.mil.pl (centy.mw.mil.pl [153.19.192.9]) by grom.mw.mil.pl (8.9.3/8.9.3) with ESMTP id VAA86102 for ; Sat, 5 Feb 2000 21:19:56 +0100 (CET) (envelope-from pawel@mw.mil.pl) Message-ID: <389C8531.CE05D651@mw.mil.pl> Date: Sat, 05 Feb 2000 21:16:49 +0100 From: Pawel Jaskorzynski X-Mailer: Mozilla 4.7 [en] (X11; I; FreeBSD 3.4-STABLE i386) X-Accept-Language: en MIME-Version: 1.0 To: "freebsd-mobile@FreeBSD.ORG" Subject: Re: ATT Paradyne 14.4 modem, need help References: <389C29DD.66A9726B@mw.mil.pl> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org OK, I found it in an old post, the pccard.conf entry should look like: # AT&T Paradyne KeepInTouch 14.4 modem card "AT&T Paradyne" "KeepInTouch Card" config 0x23 "sio3" reset 1000 insert echo ATT Paradyne 14.4 inserted remove echo ATT Paradyne 14.4 removed Good, that I kept that old stuff... ;) Thanks, Pawel To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat Feb 5 14:51:24 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from ptavv.es.net (ptavv.es.net [198.128.4.29]) by builder.freebsd.org (Postfix) with ESMTP id 4E72045F1; Sat, 5 Feb 2000 14:51:17 -0800 (PST) Received: from ptavv.es.net (localhost [127.0.0.1]) by ptavv.es.net (8.8.8/8.8.8) with ESMTP id OAA12829; Sat, 5 Feb 2000 14:51:45 -0800 (PST) Message-Id: <200002052251.OAA12829@ptavv.es.net> To: cjclark@home.com Cc: freebsd-mobile@FreeBSD.ORG, questions@FreeBSD.ORG Subject: Re: Install on DELL Latitude and Xircom CreditCard Ethernet In-reply-to: Your message of "Fri, 04 Feb 2000 22:49:30 EST." <20000204224930.B44997@cc942873-a.ewndsr1.nj.home.com> Date: Sat, 05 Feb 2000 14:51:45 -0800 From: "Kevin Oberman" Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > Date: Fri, 4 Feb 2000 22:49:30 -0500 > From: "Crist J. Clark" > Sender: owner-freebsd-mobile@FreeBSD.ORG > > I am trying to install FreeBSD 3.3 (PAO) on my DELL Latitude XPi over > a network. The problem is that the kernel cannot seem to be able to > find my card. The card is a Xircom CreditCard Ethernet IIps. In the > Win98 that came on the HDD, the Ethernet card occupies IRQ 10 and I/O > 0x110 and the PCMCIA slot is IRQ 15, I/O 0x3E0, and the range is > 0D0000. Unfortunately, although I have this info, you can't configure > the ex0 device in the kernel setup. > > I have two cards in the notebook, the Xircom and a Megahertz Modem > XJ4336. I've swapped the cards and the modem is found when plugged > into either slot, so I think the kernel negotiates the PCMCIA fine. > > What do I need to do to be able to use this Ethernet card during the > install? Or am I doing something wrong. Other than the two cards, I > think it's a fairly straight forward DELL Latitude with integrated > sound and IR port sucking up IRQs, but there should be enough for > both cards. > > Kinda frustrating. I was trying to do the install using a parallel > port PPP setup between my notebook and tower last night to no avail. > I figured once I got my Ethernet card it would be a breeze... Well... > *sigh* Unfortunately the generic kernel is not built with support for the Xircom cards. This is mostly because of conflicts with other drivers, so you need to install FreeBSD somewhere so you can re-build the kernel for the Xircom card. I have a desktop FreeBSD system at home where I configure and build all kernels for my laptop. You need to edit your configuration by un-commenting the xe device line and commenting out the ze and zp lines. Rebuild the kernel. You can also make other changes at this time, of course. To get the card to work you will also need to edit the rc.conf file to enable pccard support (see the man pages) and create a pccard.conf file. You should be able to simply copy the /etc/pccard.conf.sample to /etc/pccard.conf and edit it to lock down the IRQ to 10. Once that is done, the Xircom will probably work fine, but I have never tried on your system, so your mileage may vary. There is a Xircom on FreeBSD mail list you might want to join. See http://ukug.uk.freebsd.org/~scott/xe_drv/ for more information. R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: oberman@es.net Phone: +1 510 486-8634 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat Feb 5 19:23:30 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from cc942873-a.ewndsr1.nj.home.com (cc942873-a.ewndsr1.nj.home.com [24.2.89.207]) by builder.freebsd.org (Postfix) with ESMTP id 7E07146B6; Sat, 5 Feb 2000 19:23:13 -0800 (PST) Received: (from cjc@localhost) by cc942873-a.ewndsr1.nj.home.com (8.9.3/8.9.3) id WAA14681; Sat, 5 Feb 2000 22:27:22 -0500 (EST) (envelope-from cjc) Date: Sat, 5 Feb 2000 22:27:21 -0500 From: "Crist J. Clark" To: Kevin Oberman Cc: cjclark@home.com, freebsd-mobile@FreeBSD.ORG, questions@FreeBSD.ORG Subject: Re: Install on DELL Latitude and Xircom CreditCard Ethernet Message-ID: <20000205222721.A14610@cc942873-a.ewndsr1.nj.home.com> Reply-To: cjclark@home.com References: <20000204224930.B44997@cc942873-a.ewndsr1.nj.home.com> <200002052251.OAA12829@ptavv.es.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0i In-Reply-To: <200002052251.OAA12829@ptavv.es.net>; from oberman@es.net on Sat, Feb 05, 2000 at 02:51:45PM -0800 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Sat, Feb 05, 2000 at 02:51:45PM -0800, Kevin Oberman wrote: > > Date: Fri, 4 Feb 2000 22:49:30 -0500 > > From: "Crist J. Clark" > > Sender: owner-freebsd-mobile@FreeBSD.ORG > > > > I am trying to install FreeBSD 3.3 (PAO) on my DELL Latitude XPi over > > a network. The problem is that the kernel cannot seem to be able to > > find my card. The card is a Xircom CreditCard Ethernet IIps. In the > > Win98 that came on the HDD, the Ethernet card occupies IRQ 10 and I/O > > 0x110 and the PCMCIA slot is IRQ 15, I/O 0x3E0, and the range is > > 0D0000. Unfortunately, although I have this info, you can't configure > > the ex0 device in the kernel setup. > > > > I have two cards in the notebook, the Xircom and a Megahertz Modem > > XJ4336. I've swapped the cards and the modem is found when plugged > > into either slot, so I think the kernel negotiates the PCMCIA fine. > > > > What do I need to do to be able to use this Ethernet card during the > > install? Or am I doing something wrong. Other than the two cards, I > > think it's a fairly straight forward DELL Latitude with integrated > > sound and IR port sucking up IRQs, but there should be enough for > > both cards. > > > > Kinda frustrating. I was trying to do the install using a parallel > > port PPP setup between my notebook and tower last night to no avail. > > I figured once I got my Ethernet card it would be a breeze... Well... > > *sigh* > > Unfortunately the generic kernel is not built with support for the > Xircom cards. This is mostly because of conflicts with other drivers, > so you need to install FreeBSD somewhere so you can re-build the > kernel for the Xircom card. I have a desktop FreeBSD system at home > where I configure and build all kernels for my laptop. > > You need to edit your configuration by un-commenting the xe device > line and commenting out the ze and zp lines. Rebuild the kernel. You > can also make other changes at this time, of course. The xe0 device _is_ in the list of "Network" devices during the boot config. The ze0 and zp0 devices are there, but I disable them in the config. > To get the card to work you will also need to edit the rc.conf file to > enable pccard support (see the man pages) and create a pccard.conf > file. You should be able to simply copy the /etc/pccard.conf.sample to > /etc/pccard.conf and edit it to lock down the IRQ to 10. PCCARD support is already enabled, right? These are the PAO floppies. My PCCARD modem is found just fine. I'm a bit confused as to why I need to rebuild all of this. I thought the whole idea of the PAO install floppies was to have this stuff done already? Making a new kernel for the notebook is not really any problem, but I'd rather know for sure that it will solve my problem before I do it. > Once that is done, the Xircom will probably work fine, but I have > never tried on your system, so your mileage may vary. > > There is a Xircom on FreeBSD mail list you might want to join. See > http://ukug.uk.freebsd.org/~scott/xe_drv/ for more information. Thanks for the pointer. -- Crist J. Clark cjclark@home.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat Feb 5 20:15:38 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from rover.village.org (rover.village.org [204.144.255.49]) by builder.freebsd.org (Postfix) with ESMTP id 2868946CC; Sat, 5 Feb 2000 20:15:34 -0800 (PST) Received: from harmony.village.org (harmony.village.org [10.0.0.6]) by rover.village.org (8.9.3/8.9.3) with ESMTP id VAA29000; Sat, 5 Feb 2000 21:16:02 -0700 (MST) (envelope-from imp@harmony.village.org) Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id VAA12619; Sat, 5 Feb 2000 21:16:07 -0700 (MST) Message-Id: <200002060416.VAA12619@harmony.village.org> To: "Kevin Oberman" Subject: Re: Install on DELL Latitude and Xircom CreditCard Ethernet Cc: cjclark@home.com, freebsd-mobile@FreeBSD.ORG, questions@FreeBSD.ORG In-reply-to: Your message of "Sat, 05 Feb 2000 14:51:45 PST." <200002052251.OAA12829@ptavv.es.net> References: <200002052251.OAA12829@ptavv.es.net> Date: Sat, 05 Feb 2000 21:16:07 -0700 From: Warner Losh Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In message <200002052251.OAA12829@ptavv.es.net> "Kevin Oberman" writes: : Unfortunately the generic kernel is not built with support for the : Xircom cards. This is mostly because of conflicts with other drivers, No. It isn't built with default because it doesn't work. Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat Feb 5 20:23:14 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from rover.village.org (rover.village.org [204.144.255.49]) by builder.freebsd.org (Postfix) with ESMTP id 70CD046F2; Sat, 5 Feb 2000 20:23:11 -0800 (PST) Received: from harmony.village.org (harmony.village.org [10.0.0.6]) by rover.village.org (8.9.3/8.9.3) with ESMTP id VAA29040; Sat, 5 Feb 2000 21:23:41 -0700 (MST) (envelope-from imp@harmony.village.org) Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id VAA12742; Sat, 5 Feb 2000 21:23:46 -0700 (MST) Message-Id: <200002060423.VAA12742@harmony.village.org> To: cjclark@home.com Subject: Re: Install on DELL Latitude and Xircom CreditCard Ethernet Cc: Kevin Oberman , freebsd-mobile@FreeBSD.ORG, questions@FreeBSD.ORG In-reply-to: Your message of "Sat, 05 Feb 2000 23:27:30 EST." <20000205232730.B14610@cc942873-a.ewndsr1.nj.home.com> References: <20000205232730.B14610@cc942873-a.ewndsr1.nj.home.com> <200002052251.OAA12829@ptavv.es.net> <200002060416.VAA12619@harmony.village.org> Date: Sat, 05 Feb 2000 21:23:46 -0700 From: Warner Losh Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In message <20000205232730.B14610@cc942873-a.ewndsr1.nj.home.com> "Crist J. Clark" writes: : Whoa!!! Hold on. Xircom CreditCard Ethernet IIps are said to be : supported. From : http://home.jp.FreeBSD.org/~toshi/PAO3/SUPPORTED.CARDS, It is supported in PAO3, but it isn't working in current at the moment. Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat Feb 5 20:26: 2 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from cc942873-a.ewndsr1.nj.home.com (cc942873-a.ewndsr1.nj.home.com [24.2.89.207]) by builder.freebsd.org (Postfix) with ESMTP id C36F14615; Sat, 5 Feb 2000 20:25:57 -0800 (PST) Received: (from cjc@localhost) by cc942873-a.ewndsr1.nj.home.com (8.9.3/8.9.3) id XAA16052; Sat, 5 Feb 2000 23:27:30 -0500 (EST) (envelope-from cjc) Date: Sat, 5 Feb 2000 23:27:30 -0500 From: "Crist J. Clark" To: Warner Losh Cc: Kevin Oberman , cjclark@home.com, freebsd-mobile@FreeBSD.ORG, questions@FreeBSD.ORG Subject: Re: Install on DELL Latitude and Xircom CreditCard Ethernet Message-ID: <20000205232730.B14610@cc942873-a.ewndsr1.nj.home.com> Reply-To: cjclark@home.com References: <200002052251.OAA12829@ptavv.es.net> <200002060416.VAA12619@harmony.village.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0i In-Reply-To: <200002060416.VAA12619@harmony.village.org>; from imp@village.org on Sat, Feb 05, 2000 at 09:16:07PM -0700 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Sat, Feb 05, 2000 at 09:16:07PM -0700, Warner Losh wrote: > In message <200002052251.OAA12829@ptavv.es.net> "Kevin Oberman" writes: > : Unfortunately the generic kernel is not built with support for the > : Xircom cards. This is mostly because of conflicts with other drivers, > > No. It isn't built with default because it doesn't work. Whoa!!! Hold on. Xircom CreditCard Ethernet IIps are said to be supported. From http://home.jp.FreeBSD.org/~toshi/PAO3/SUPPORTED.CARDS, ----------------------------------------------------------------------- Current Status ----------------------------------------------------------------------- Type Card Status Driver ----------------------------------------------------------------------- Ethernet . . . Xircom CreditCard Ethernet Adaptor IIps OK xe (PS-CE2-10) Which is my card. Is there a problem with these cards I am missing? I only got this one after I checked it was on that list. -- Crist J. Clark cjclark@home.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Feb 6 0:44:58 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from quack.kfu.com (quack.kfu.com [170.1.70.2]) by builder.freebsd.org (Postfix) with ESMTP id 1612C3D1B for ; Sun, 6 Feb 2000 00:44:56 -0800 (PST) Received: from icarus.kfu.com (icarus.kfu.com [170.1.70.17]) by quack.kfu.com (8.9.2/8.9.3) with ESMTP id XAA31400 for ; Sat, 5 Feb 2000 23:58:10 -0800 (PST) (envelope-from nsayer@quack.kfu.com) Received: from quack.kfu.com by icarus.kfu.com with ESMTP (8.9.3//ident-1.0) id XAA00431; Sat, 5 Feb 2000 23:58:10 -0800 (PST) Message-ID: <389D2991.2C2C345C@quack.kfu.com> Date: Sun, 06 Feb 2000 07:58:09 +0000 From: Nick Sayer X-Mailer: Mozilla 4.7 [en] (X11; U; Linux 2.2.12 i386) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-mobile@freebsd.org Subject: ata2 flash cards with -current? Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org My laptop has two IDE controllers, one for the hard disk and one for the DVD. I just upgraded to -current. Everything worked after a short struggle, except one. I used to use this config line in 3.4+PAO: config 0x1 "wdc2" any cardio 0x340 16 There does not seem to be any way to do anything like this in -current's pccard.conf, and config 0x1 "ata2" ? results in ENXIO at insert time. My kernel config says just "device ata", since the two built-in controllers are PCI. any thoughts? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Feb 6 17: 0:58 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from ptavv.es.net (ptavv.es.net [198.128.4.29]) by builder.freebsd.org (Postfix) with ESMTP id 291593E07; Sun, 6 Feb 2000 17:00:55 -0800 (PST) Received: from ptavv.es.net (localhost [127.0.0.1]) by ptavv.es.net (8.8.8/8.8.8) with ESMTP id RAA03533; Sun, 6 Feb 2000 17:01:27 -0800 (PST) Message-Id: <200002070101.RAA03533@ptavv.es.net> To: cjclark@home.com Cc: Warner Losh , freebsd-mobile@FreeBSD.ORG, questions@FreeBSD.ORG Subject: Re: Install on DELL Latitude and Xircom CreditCard Ethernet In-reply-to: Your message of "Sat, 05 Feb 2000 23:27:30 EST." <20000205232730.B14610@cc942873-a.ewndsr1.nj.home.com> Date: Sun, 06 Feb 2000 17:01:27 -0800 From: "Kevin Oberman" Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I must apologize. I missed the PAO in you initial message. I'm running standard 3.4-Release and not PAO. It works fine, there. Seems odd that PAO would fail when vanilla FBSD works, but that seems to be the case. R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: oberman@es.net Phone: +1 510 486-8634 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Feb 6 19: 7: 6 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from cc942873-a.ewndsr1.nj.home.com (cc942873-a.ewndsr1.nj.home.com [24.2.89.207]) by builder.freebsd.org (Postfix) with ESMTP id DDC723E3C; Sun, 6 Feb 2000 19:07:00 -0800 (PST) Received: (from cjc@localhost) by cc942873-a.ewndsr1.nj.home.com (8.9.3/8.9.3) id WAA19880; Sun, 6 Feb 2000 22:11:22 -0500 (EST) (envelope-from cjc) Date: Sun, 6 Feb 2000 22:11:22 -0500 From: "Crist J. Clark" To: Warner Losh Cc: cjclark@home.com, Kevin Oberman , freebsd-mobile@FreeBSD.ORG, questions@FreeBSD.ORG Subject: Re: Install on DELL Latitude and Xircom CreditCard Ethernet Message-ID: <20000206221122.C18352@cc942873-a.ewndsr1.nj.home.com> Reply-To: cjclark@home.com References: <20000205232730.B14610@cc942873-a.ewndsr1.nj.home.com> <200002052251.OAA12829@ptavv.es.net> <200002060416.VAA12619@harmony.village.org> <20000205232730.B14610@cc942873-a.ewndsr1.nj.home.com> <200002060423.VAA12742@harmony.village.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0i In-Reply-To: <200002060423.VAA12742@harmony.village.org>; from imp@village.org on Sat, Feb 05, 2000 at 09:23:46PM -0700 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Sat, Feb 05, 2000 at 09:23:46PM -0700, Warner Losh wrote: > In message <20000205232730.B14610@cc942873-a.ewndsr1.nj.home.com> "Crist J. Clark" writes: > : Whoa!!! Hold on. Xircom CreditCard Ethernet IIps are said to be > : supported. From > : http://home.jp.FreeBSD.org/~toshi/PAO3/SUPPORTED.CARDS, > > It is supported in PAO3, but it isn't working in current at the > moment. I'm not so sure about the 3.4 PAO either. I change the IRQ of the PCCARD controller to 15 and when it starts to look for the cards, panic general protection fault syncing disks... done Fatal trap 9: general protection fault while in kernel mode instruction pointer = 0x8:0xc024de3f stack pointer = 0x10:0xc2eab8ac frame pointer = 0x10:0xc2eab8b0 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 12 (pccardd) interrupt mask = net tty bio cam trap number = 9 panic general protection fault Automatic reboot in 15 seconds - press a key on the console to abort Fatal trap 9: general protection fault while in kernel mode instruction pointer = 0x8:0xc024de3f stack pointer = 0x10:0xc2eab7cc frame pointer = 0x10:0xc2eab7d0 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 12 (pccardd) interrupt mask = net tty bio cam trap number = 9 panic general protection fault Automatic reboot in 15 seconds - press a key on the console to abort I went back to the PAO 3.3 that I had been using (but didn't find the card), and actually looked at the config in the mfsroot. There was no Xircom CreditCard Ethernet IIps entry in the pccard.conf file on 3.3. I added one and then tried the 3.3 kern.flp and the modifed mfsroot. It GFP'ed too. I tried building a custom kernel for the notebook, but I did not get anywhere. I think I'll try that again. Anyway, has anyone successfully used the Xircom CreditCard Ethernet IIps with the PAO GENERIC kernel? -- Crist J. Clark cjclark@home.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Feb 6 21:32:18 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from rover.village.org (rover.village.org [204.144.255.49]) by builder.freebsd.org (Postfix) with ESMTP id 50B203D07 for ; Sun, 6 Feb 2000 21:32:15 -0800 (PST) Received: from harmony.village.org (harmony.village.org [10.0.0.6]) by rover.village.org (8.9.3/8.9.3) with ESMTP id WAA32621; Sun, 6 Feb 2000 22:32:54 -0700 (MST) (envelope-from imp@harmony.village.org) Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id WAA18976; Sun, 6 Feb 2000 22:33:11 -0700 (MST) Message-Id: <200002070533.WAA18976@harmony.village.org> To: Nick Sayer Subject: Re: ata2 flash cards with -current? Cc: freebsd-mobile@FreeBSD.ORG In-reply-to: Your message of "Sun, 06 Feb 2000 07:58:09 GMT." <389D2991.2C2C345C@quack.kfu.com> References: <389D2991.2C2C345C@quack.kfu.com> Date: Sun, 06 Feb 2000 22:33:10 -0700 From: Warner Losh Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In message <389D2991.2C2C345C@quack.kfu.com> Nick Sayer writes: : I just upgraded to -current. Everything worked after a short struggle, : except one. : There does not seem to be any way to do anything like this in : -current's pccard.conf, and : config 0x1 "ata2" ? : results in ENXIO at insert time. My kernel config says just "device : ata", since the two built-in controllers are PCI. For a variety of very frustrating reasons, ata isn't supported yet at pccard. Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Feb 7 2:58: 0 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from astralblue.com (adsl-209-76-108-39.dsl.snfc21.pacbell.net [209.76.108.39]) by builder.freebsd.org (Postfix) with ESMTP id B29BA3D60 for ; Mon, 7 Feb 2000 02:57:58 -0800 (PST) Received: from localhost (ab@localhost) by astralblue.com (8.9.3/8.9.3) with ESMTP id CAA39857; Mon, 7 Feb 2000 02:58:40 -0800 (PST) (envelope-from ab@astralblue.com) Date: Mon, 7 Feb 2000 02:58:39 -0800 (PST) From: "Eugene M. Kim" To: Nick Sayer Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: ata2 flash cards with -current? In-Reply-To: <389D2991.2C2C345C@quack.kfu.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Apparently there are too many variaties of ATA PCCard devices that requires different access methods, and there isn't a clean way to accomodate all these into our ata driver. I guess the situation will be better when both ata and pccard code are fully migrated into the newbus architecture. Eugene On Sun, 6 Feb 2000, Nick Sayer wrote: | My laptop has two IDE controllers, one for the hard disk and one for the | DVD. | I just upgraded to -current. Everything worked after a short struggle, | except | one. | | I used to use this config line in 3.4+PAO: | | config 0x1 "wdc2" any cardio 0x340 16 | | There does not seem to be any way to do anything like this in | -current's pccard.conf, and | | config 0x1 "ata2" ? | | results in ENXIO at insert time. My kernel config says just "device | ata", | since the two built-in controllers are PCI. | | any thoughts? -- Eugene M. Kim "Is your music unpopular? Make it popular; make music which people like, or make people who like your music." To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Feb 7 7:43:43 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from wombat.core.gelsen-net.de (wombat.core.gelsen-net.de [212.6.185.125]) by builder.freebsd.org (Postfix) with ESMTP id EB4A63F2A for ; Mon, 7 Feb 2000 07:43:35 -0800 (PST) Received: from server.intrabol.local (pm3213.dial.gelsen-net.de [212.6.182.77]) by wombat.core.gelsen-net.de (8.9.1b+Sun/8.9.1) with ESMTP id QAA05413 for ; Mon, 7 Feb 2000 16:45:21 +0100 (MET) Received: (from jojo@localhost) by server.intrabol.local (8.9.3/8.9.3) id QAA12866 for freebsd-mobile@FreeBSD.ORG; Mon, 7 Feb 2000 16:46:01 +0100 (CET) (envelope-from jojo) Message-Id: <200002071546.QAA12866@server.intrabol.local> Date: Mon, 7 Feb 2000 16:46:01 +0100 (CET) From: jojo@buchonline.net Subject: D-Link DFE 650TX + Toshiba Satellite 2650XDVD To: FreeBSDMobile MIME-Version: 1.0 Content-Type: TEXT/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8BIT Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, someone out there with a working D-Link DFE 650TX pccard-nic on a Toshiba Satellite 2650XDVD laptop (PAO 3.4)? I´ve read the PAO-FAQ (ed0: device timeout) but haven´t managed to get it working. Regards, Joachim -- Hans-Joachim Leidinger buch online jojo@buchonline.net Munscheidstr. 14 FAX: +49 209 1971449 45886 Gelsenkirchen FAX: 0209 1671449 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Feb 7 12:31:30 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from mail2.svr.pol.co.uk (mail2.svr.pol.co.uk [195.92.193.210]) by builder.freebsd.org (Postfix) with ESMTP id 8D3564291; Mon, 7 Feb 2000 12:30:58 -0800 (PST) Received: from modem-149.bicolor-pseudochromis.dialup.pol.co.uk ([62.136.231.149] helo=lungfish.freeserve.co.uk) by mail2.svr.pol.co.uk with esmtp (Exim 3.13 #0) id 12Huol-0005zz-00; Mon, 07 Feb 2000 20:31:31 +0000 Received: (from scott@localhost) by lungfish.freeserve.co.uk (8.8.8/8.8.8) id LAA00800; Sun, 6 Feb 2000 11:42:17 GMT (envelope-from scott) Message-ID: <20000206114217.12519@lungfish.freeserve.co.uk> Date: Sun, 6 Feb 2000 11:42:17 +0000 From: Scott Mitchell To: cjclark@home.com, Warner Losh Cc: Kevin Oberman , freebsd-mobile@FreeBSD.ORG, questions@FreeBSD.ORG Subject: Re: Install on DELL Latitude and Xircom CreditCard Ethernet References: <200002052251.OAA12829@ptavv.es.net> <200002060416.VAA12619@harmony.village.org> <20000205232730.B14610@cc942873-a.ewndsr1.nj.home.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.89i In-Reply-To: <20000205232730.B14610@cc942873-a.ewndsr1.nj.home.com>; from Crist J. Clark on Sat, Feb 05, 2000 at 11:27:30PM -0500 X-Operating-System: FreeBSD 2.2.6-RELEASE i386 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Sat, Feb 05, 2000 at 11:27:30PM -0500, Crist J. Clark wrote: > On Sat, Feb 05, 2000 at 09:16:07PM -0700, Warner Losh wrote: > > In message <200002052251.OAA12829@ptavv.es.net> "Kevin Oberman" writes: > > : Unfortunately the generic kernel is not built with support for the > > : Xircom cards. This is mostly because of conflicts with other drivers, > > > > No. It isn't built with default because it doesn't work. > > Whoa!!! Hold on. Xircom CreditCard Ethernet IIps are said to be > supported. From > http://home.jp.FreeBSD.org/~toshi/PAO3/SUPPORTED.CARDS, I dunno about PAO, but the IIps is only semi-supported on my stock xe driver (which comes with 3.3 and 3.4; you shouldn't need PAO to use it). For 'semi-supported' read "it might work, it might not, we haven't worked out why yet". Probably shouldn't mention this now, but you'd have been better off with a Xircom CE3 card -- not only will it connect to 100Mbit networks, but they generally work out of the box with the xe driver. Definitely worth joining the freebsd-xircom list while you get this sorted out. Scott -- =========================================================================== Scott Mitchell | PGP Key ID | "Eagles may soar, but weasels Cambridge, England | 0x54B171B9 | don't get sucked into jet engines" s.mitchell@computer.org | 0xAA775B8B | -- Anon To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Feb 7 13:37:10 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from cc942873-a.ewndsr1.nj.home.com (cc942873-a.ewndsr1.nj.home.com [24.2.89.207]) by builder.freebsd.org (Postfix) with ESMTP id 8D7AF3FFE; Mon, 7 Feb 2000 13:37:03 -0800 (PST) Received: (from cjc@localhost) by cc942873-a.ewndsr1.nj.home.com (8.9.3/8.9.3) id QAA59066; Mon, 7 Feb 2000 16:37:41 -0500 (EST) (envelope-from cjc) Date: Mon, 7 Feb 2000 16:37:41 -0500 From: "Crist J. Clark" To: Scott Mitchell Cc: cjclark@home.com, Warner Losh , Kevin Oberman , freebsd-mobile@FreeBSD.ORG, questions@FreeBSD.ORG Subject: Re: Install on DELL Latitude and Xircom CreditCard Ethernet Message-ID: <20000207163740.A58810@cc942873-a.ewndsr1.nj.home.com> Reply-To: cjclark@home.com References: <200002052251.OAA12829@ptavv.es.net> <200002060416.VAA12619@harmony.village.org> <20000205232730.B14610@cc942873-a.ewndsr1.nj.home.com> <20000206114217.12519@lungfish.freeserve.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0i In-Reply-To: <20000206114217.12519@lungfish.freeserve.co.uk>; from s.mitchell@computer.org on Sun, Feb 06, 2000 at 11:42:17AM +0000 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Sun, Feb 06, 2000 at 11:42:17AM +0000, Scott Mitchell wrote: > On Sat, Feb 05, 2000 at 11:27:30PM -0500, Crist J. Clark wrote: > > On Sat, Feb 05, 2000 at 09:16:07PM -0700, Warner Losh wrote: > > > In message <200002052251.OAA12829@ptavv.es.net> "Kevin Oberman" writes: > > > : Unfortunately the generic kernel is not built with support for the > > > : Xircom cards. This is mostly because of conflicts with other drivers, > > > > > > No. It isn't built with default because it doesn't work. > > > > Whoa!!! Hold on. Xircom CreditCard Ethernet IIps are said to be > > supported. From > > http://home.jp.FreeBSD.org/~toshi/PAO3/SUPPORTED.CARDS, > > I dunno about PAO, but the IIps is only semi-supported on my stock xe > driver (which comes with 3.3 and 3.4; you shouldn't need PAO to use it). > For 'semi-supported' read "it might work, it might not, we haven't worked > out why yet". Probably shouldn't mention this now, but you'd have been > better off with a Xircom CE3 card -- not only will it connect to 100Mbit > networks, but they generally work out of the box with the xe driver. I wanted to be able to do 10BaseT (RJ-45) or 10Base2 (BNC). I don't think I can do that with the CE3. But I did have the choice of getting a Linksys card... but I thought that the Xircom would be a better choice than a NE2000-clone. :( Guess that was a bad call. > Definitely worth joining the freebsd-xircom list while you get this sorted > out. Will do. -- Crist J. Clark cjclark@home.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Feb 7 14:53: 0 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from moek.pir.net (moek.pir.net [209.192.237.190]) by builder.freebsd.org (Postfix) with ESMTP id 5954740B5 for ; Mon, 7 Feb 2000 14:52:47 -0800 (PST) Received: from pir by moek.pir.net with local (Exim) id 12Hx27-0004EL-00 for freebsd-mobile@FreeBSD.ORG; Mon, 07 Feb 2000 17:53:27 -0500 Date: Mon, 7 Feb 2000 17:53:27 -0500 From: Peter Radcliffe To: freebsd-mobile@FreeBSD.ORG Subject: Adaptec 1460B, PAO3 and cdrom drive problems. Message-ID: <20000207175326.G9141@pir.net> Mail-Followup-To: freebsd-mobile@FreeBSD.ORG References: <20000204224930.B44997@cc942873-a.ewndsr1.nj.home.com> <200002052251.OAA12829@ptavv.es.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <200002052251.OAA12829@ptavv.es.net>; from oberman@es.net on Sat, Feb 05, 2000 at 02:51:45PM -0800 X-fish: < Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org With the re-introduction of the aic driver to PAO I went out and bought an Adpatec 1460B. The laptop is a Sony 505TR running FreeBSD 3.4-PAO. After a quick kernel recompile to add all the appropriate scsi options it appeared to work fine with an external disk. I then tried with a scsi cdrom drive and although it was detected and I get the cd0: comments I don't appear to be able to use it ... I tried 3 different cdrom drives and 3 different CDs :/ The external IDE cdrom drive I have works fine, so I'm assuming it's not a generic cd problem and the scsi cdrom drive works fine with windows 98 :/ Anyone else had this working ? P. options SCSI_DELAY=8000 #Be pessimistic about Joe SCSI device controller aic0 at isa? port ? cam irq ? disable controller scbus0 device da0 #SCSI direct access devices (aka disks) device sa0 #SCSI tapes device pass0 #CAM passthrough driver device cd0 #Only need one of these, the code dynamically grows device pt0 at scbus? # SCSI processor type Card inserted, slot 0 Feb 6 00:00:13 disapp pccardd[81]: Card "Adaptec, Inc."("APA-1460 SCSI Host Adapter") [Version 0.01] [(null)] matched "Adaptec, Inc\." ("APA-1460.*") [(null)] [(null)] card0: assign aic0 iobase 0x340 irq 7 aic0: aic6360, dma, disconnection, parity check da0 at aic0 bus 0 target 3 lun 0 da0: Fixed Direct Access SCSI-2 device da0: 5.000MB/s transfers (5.000MHz, offset 8), Tagged Queueing Enabled da0: 1006MB (2061108 512 byte sectors: 64H 32S/T 1006C) pir@disapp# mount /dev/da0s1e /mnt pir@disapp# df /mnt Filesystem 1K-blocks Used Avail Capacity Mounted on /dev/da0s1e 998367 700337 218161 76% /mnt pir@disapp# ls -aFl /mnt total 700338 drwxr-xr-x 2 root wheel 512 Feb 5 18:09 ./ drwxr-xr-x 22 root wheel 512 Feb 6 00:00 ../ -rw------- 1 root wheel 39413760 Feb 5 17:48 disapp..dump -rw------- 1 root wheel 645324800 Feb 5 18:09 disapp.usr.dump -rw------- 1 root wheel 32010240 Feb 5 18:09 disapp.var.dump pir@disapp# umount /mnt [...] cd0 at aic0 bus 0 target 6 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 5.000MB/s transfers (5.000MHz, offset 8) cd0: cd present [1318424 x 512 byte records] pir@disapp# mount_cd9660 /dev/cd0a /mnt mount_cd9660: Device not configured pir@disapp# cdcontrol -f /dev/cd0a eject cdcontrol: no disc in drive /dev/cd0a pir@disapp# mount_cd9660 /dev/cd0c /mnt mount_cd9660: Device not configured pir@disapp# cdcontrol -f /dev/cd0c eject cdcontrol: no disc in drive /dev/cd0a -- pir pir@pir.net pir@net.tufts.edu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue Feb 8 11:55:36 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from mail.rdc3.on.home.com (ha1.rdc3.on.home.com [24.2.9.68]) by builder.freebsd.org (Postfix) with ESMTP id 933974354 for ; Tue, 8 Feb 2000 11:55:26 -0800 (PST) Received: from tea.thpoon.com ([24.114.152.71]) by mail.rdc3.on.home.com (InterMail v4.01.01.02 201-229-111-106) with ESMTP id <20000208195229.ISSK10570.mail.rdc3.on.home.com@tea.thpoon.com> for ; Tue, 8 Feb 2000 11:52:29 -0800 Received: from antipode by tea.thpoon.com with local (Exim 3.12 #1 (Debian)) id 12IGil-0004eR-00 for ; Tue, 08 Feb 2000 14:54:47 -0500 To: freebsd-mobile@FreeBSD.ORG Subject: Binary drivers for Lucent modems on Thinkpads X-Face: 0=A/O5-+sE[Tf%X>rYr?Y5LD4,:^'jaJ!4jC&UR*ZrrK2>^`g22Qeb]!:d;}2YJ|Hq"LHdF OX`jWX|AT-WVFQ(TPhFVak)0nt$aEdlOq=1~D,:\z5QlVOrZ2(H,mKg=Xr|'VlHA="r Organization: Wgaf From: Arcady Genkin Date: 08 Feb 2000 14:54:47 -0500 Message-ID: <87aelbpj08.fsf@tea.thpoon.com> Lines: 10 User-Agent: Gnus/5.0803 (Gnus v5.8.3) XEmacs/21.1 (Bryce Canyon) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I've just bought a Thinkpad 240. I've heard that Lucent provides binary Linux drivers for its built-in winmodem. Does anyone know if these drivers are also available for FreeBSD or if there's any way to get the linux version work under FreeBSD? Thanks! -- Arcady Genkin http://www.thpoon.com Nostalgia isn't what it used to be. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue Feb 8 14:55:58 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from www.geocrawler.com (sourceforge.net [198.186.203.33]) by builder.freebsd.org (Postfix) with ESMTP id F04323E2E for ; Tue, 8 Feb 2000 13:41:42 -0800 (PST) Received: (from nobody@localhost) by www.geocrawler.com (8.9.3/8.9.3) id NAA30464; Tue, 8 Feb 2000 13:37:54 -0800 Date: Tue, 8 Feb 2000 13:37:54 -0800 Message-Id: <200002082137.NAA30464@www.geocrawler.com> To: freebsd-mobile@freebsd.org Subject: Confused about PCIC From: "Gail Pickett" Reply-To: "Gail Pickett" Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org This message was sent from Geocrawler.com by "Gail Pickett" Be sure to reply to that address. I am attempting to get my PCMCIA modem working on my laptop and have browsed through the e-mail on this mailing list, but I am confused about how to get PCIC loaded. I am currently attempting to load PCIC with kldload and I get the message: kldload: can't load pcic: No such file or directory Is pcic a file or a device? And where do I get it from as there is no such file on my laptop? Thanks. Geocrawler.com - The Knowledge Archive To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 9 1:14:27 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from rover.village.org (rover.village.org [204.144.255.49]) by builder.freebsd.org (Postfix) with ESMTP id E95813EFF for ; Tue, 8 Feb 2000 23:28:08 -0800 (PST) Received: from harmony.village.org (harmony.village.org [10.0.0.6]) by rover.village.org (8.9.3/8.9.3) with ESMTP id AAA40618; Wed, 9 Feb 2000 00:27:37 -0700 (MST) (envelope-from imp@harmony.village.org) Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id AAA32672; Wed, 9 Feb 2000 00:28:18 -0700 (MST) Message-Id: <200002090728.AAA32672@harmony.village.org> To: Arcady Genkin Subject: Re: Binary drivers for Lucent modems on Thinkpads Cc: freebsd-mobile@FreeBSD.ORG In-reply-to: Your message of "08 Feb 2000 14:54:47 EST." <87aelbpj08.fsf@tea.thpoon.com> References: <87aelbpj08.fsf@tea.thpoon.com> Date: Wed, 09 Feb 2000 00:28:18 -0700 From: Warner Losh Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In message <87aelbpj08.fsf@tea.thpoon.com> Arcady Genkin writes: : Does anyone know if these drivers are also available for FreeBSD or if : there's any way to get the linux version work under FreeBSD? No. No. No. This may change in the future. Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 9 5:13:54 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from oxygen.yy.ics.keio.ac.jp (oxygen.yy.ics.keio.ac.jp [131.113.47.3]) by builder.freebsd.org (Postfix) with ESMTP id A54F73E53; Wed, 9 Feb 2000 05:13:44 -0800 (PST) Received: from lavender.yy.cs.keio.ac.jp (ppp131.dialup.st.keio.ac.jp [131.113.27.131]) by oxygen.yy.ics.keio.ac.jp (8.9.3+3.2W/3.7W) with ESMTP id WAA23334; Wed, 9 Feb 2000 22:13:10 +0900 (JST) (envelope-from sanpei@sanpei.org) Received: (from sanpei@localhost) by lavender.yy.cs.keio.ac.jp (8.9.3/3.7W) id TAA30840; Wed, 9 Feb 2000 19:21:03 +0900 (JST) Message-Id: <200002091021.TAA30840@lavender.yy.cs.keio.ac.jp> Subject: ata flash card support under FreeBSD-4-current To: mobile@FreeBSD.ORG Cc: sos@FreeBSD.org X-Mailer: Mew version 1.70 on Emacs 19.34.1 / Mule 2.3 Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Date: Wed, 09 Feb 2000 19:21:03 +0900 From: MIHIRA Sanpei Yoshiro Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I tested Doug Ambrisko's ATA flash card code for FreeBSD-4-current sys/dev/ata on January. But that code did not have detach code, so we can't re-insert flush card. I want to use ata flush card under -current. Does someone have any plan or experimental code? --- MIHIRA Sanpei Yoshiro Yokohama, Japan. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 9 6:34:22 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from manchaca.ece.utexas.edu (manchaca.ece.utexas.edu [128.83.59.38]) by builder.freebsd.org (Postfix) with ESMTP id 972263EFB for ; Wed, 9 Feb 2000 06:34:08 -0800 (PST) Received: from tick.ece.utexas.edu (tick.ece.utexas.edu [128.83.59.31]) by manchaca.ece.utexas.edu (8.9.3/8.9.0) with SMTP id IAA29847 for ; Wed, 9 Feb 2000 08:33:39 -0600 (CST) Date: Wed, 9 Feb 2000 08:33:39 -0600 (CST) From: Michael Chin-yuan Wu To: freebsd-mobile@freebsd.org Subject: Re: Megahertz pccard (fwd) Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Content-Transfer-Encoding: QUOTED-PRINTABLE Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org _________________________________________________________________ Michael Chin-Yuan Wu Department of Electrical Engineering, The University of Texas at Austin mwu@ece.utexas.edu ---------- Forwarded message ---------- Date: Wed, 9 Feb 2000 03:51:34 -0600 From: "Wu, Michael Chin-Yuan" To: mwu@ece.utexas.edu Subject: Re: Megahertz pccard=20 -- =B9]=A4M=B6Q=A4@=B3=CE=A1A=ABo=B7Q=B8u=A8}=B9=CF=A1C Strive for the very best; The outcome is not important. ----- Original Message ----- From: "Wu, Michael Chin-Yuan" To: "Forrest Aldrich" ; "Warner Losh" Cc: ; "Gerald Abshez" ; Sent: Wednesday, February 09, 2000 3:47 AM Subject: Re: Megahertz pccard | -----BEGIN PGP SIGNED MESSAGE----- | Hash: SHA1 | | Hello Everyone | | I am having trouble configuring the above laptop to work | with FreeBSD 3.4-release/4.0-current and the NIC | The NIC is 3com FE574Bt[supported in pccard.conf.sample] | The following is my setup as file attachments, | Can somebody give me some ideas? | Thanks in advance | - - -- | Hardware | Asus MP83000 PII366 | Ricoh RL5C475 Cardbus Controller | One PCMCIA slot | One IDE Controller at IRQ 14 | Intel 82440MX PCI Bus Master | IrDA v3.0 | FE574B-3com 10/100 LAN PCCARD, not cardbus | | - - -- | Windows98SE reports the following | PCMCIA Shared memory Start 000C0000 end 00FFFFFF | Length 00001000 | - - From Control panel--->System | PCMCIA Card Services Memory Range 08000000-08000FFF | RICOH RL5C475 Cardbus Controller | I/O 1400-141F IRQ 11 0C000000-0C000FFF | Sound at IRQ5 | 3com FE574BT at IRQ 15 [very weird] I/O 1400-141F | | | | | - -- | =B9]=A4M=B6Q=A4@=B3=CE=A1A=ABo=B7Q=B8u=A8}=B9=CF=A1C | Strive for the very best; The outcome is not important. | - ----- Original Message ----- | From: "Warner Losh" | To: "Forrest Aldrich" | Cc: ; "Gerald Abshez" ; | Sent: Tuesday, February 08, 2000 12:09 PM | Subject: Re: Megahertz pccard | | | | In message <4.2.2.20000208123416.00a154d0@216.67.12.69> Forrest Aldrich= writes: | | : I'm using the floppies from the 01/27 CURRENT (as that's all they pro= vide | | : now, on current.freebsd.org)... and I can't get it to recognize the | | : cards. Period. When it goes to initialize, and time for installat= ion, | | : nothing shows up for NICs... just ppp, lp0, etc. | | : | | : Is very frustrating! | | : | | : | | : For what it's worth, here are the card numbers I have: | | : | | : | | : 3CCFEM556 B | | : 3CCFE574BT | | | | Boot -v and send me the output. You can get to the dmesg output from | | before the console switch by using the scroll lock key. After the | | switch, it is on vty2 or something like that. | | | | | -----BEGIN PGP SIGNATURE----- | Version: PGPfreeware 6.5.2 for non-commercial use | | iQA/AwUBOKE3to+pn6xwqVlNEQIuCgCeJvWuz5EFPt7WKOZO1Z19IeEnQboAnjIf | HD6dTaBPsEigZ7OgzbhVWB8L | =3D2Wr5 | -----END PGP SIGNATURE----- | | | begin 666 dmesg_boot_v.txt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`` ` end begin 666 consoleoutput.txt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ed, 9 Feb 2000 08:19:24 -0800 (PST) Received: by moo.sysabend.org (Postfix, from userid 1004) id 5D7337555; Wed, 9 Feb 2000 08:21:57 -0800 (PST) Received: from localhost (localhost [127.0.0.1]) by moo.sysabend.org (Postfix) with ESMTP id 593B11D8A for ; Wed, 9 Feb 2000 08:21:57 -0800 (PST) Date: Wed, 9 Feb 2000 08:21:57 -0800 (PST) From: Jamie Bowden To: mobile@freebsd.org Subject: Dell Latitude and 3.4-R Message-ID: Approved: yep X-representing: Only myself. X-badge: We don't need no stinking badges. X-obligatory-profanity: Fuck X-moo: Moo. MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I would like to report the following machine as succesfully being a freebsd host, just as a data point: With Thanks to Bill Paul for hitting me with the appropriate clue stick as necessary. The dmesg below reports the chip as being a celeron (BeOS did the same), but it's not. I don't know what's up with that. I'm compiling XFree86 3.3.6 now, and I'll report back if it supports the NeoMagic MagicMedia 256ZX if anyone's interested. Dell Latitude CPi R w/Intel Pro/100 PCCard and Zoom 56k PCMCIA LT Modem (non winmodem of course): Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.4-RELEASE #1: Tue Feb 8 15:00:42 GMT 2000 root@ghast:/usr/src/sys/compile/ghast Timecounter "i8254" frequency 1193182 Hz CPU: Celeron (397.05-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x66a Stepping = 10 Features=0x183f9ff real memory = 134217728 (131072K bytes) avail memory = 128094208 (125092K bytes) Preloaded elf kernel "kernel" at 0xc024e000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc024e09c. Pentium Pro MTRR support enabled Probing for devices on PCI bus 0: chip0: rev 0x03 on pci0.0.0 chip1: rev 0x03 on pci0.1.0 chip2: rev 0x01 int a irq 11 on pci0.3.0 chip3: rev 0x01 int a irq 11 on pci0.3.1 chip4: rev 0x02 on pci0.7.0 ide_pci0: rev 0x01 on pci0.7.1 chip5: rev 0x02 on pci0.7.3 Probing for devices on PCI bus 1: vga0: rev 0x00 int a irq 11 on pci1.0.0 Probing for PnP devices: Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 irq 12 on isa psm0: model Generic PS/2 mouse, device ID 0 sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): wd0: 6194MB (12685680 sectors), 13424 cyls, 15 heads, 63 S/T, 512 B/S wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 0 (atapi): , removable, intr, dma, iordis acd0: drive speed 4134KB/sec, 128KB cache acd0: supported read types: CD-R, CD-RW, CD-DA acd0: Audio: play, 16 volume levels acd0: Mechanism: ejectable tray acd0: Medium: CD-ROM 120mm data disc loaded, unlocked ppc0 at 0x378 irq 7 flags 0x40 on isa ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold lpt0: on ppbus 0 lpt0: Interrupt-driven port ppi0: on ppbus 0 plip0: on ppbus 0 xe0: probe xe0 not found vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface PC-Card VLSI 82C146 (5 mem & 2 I/O windows) pcic: controller irq 3 Initializing PC-card drivers: xe sio changing root device to wd0s3a Card inserted, slot 0 Card inserted, slot 1 wd0s2: raw partition size != slice size wd0s2: start 4192965, end 8385929, size 4192965 wd0s2c: start 4192965, end 12675284, size 8482320 wd0s2: truncating raw partition wd0s2: rejecting partition in BSD label: it isn't entirely within the slice wd0s2: start 4192965, end 8385929, size 4192965 wd0s2e: start 4717253, end 12675284, size 7958032 xe: Probing for unit 0 xe0: attach xe0: Intel CE3, bonding version 0x45, 100Mbps capable xe0: DingoID = 0x444b, RevisionID = 0x1, VendorID = 0 xe0: Ethernet address 00:a0:c9:bc:3e:b4 xe0: init xe0: enable_intr xe0: watchdog timeout; resetting card xe0: stop xe0: disable_intr xe0: hard_reset xe0: setmedia xe0: disable_intr xe0: init xe0: setmedia xe0: disable_intr xe0: soft_reset xe0: silicon revision = 4 xe0: disable_intr xe0: MII registers: 0:3000 1:7809 4:01e1 5:0000 6:0000 xe0: setmedia xe0: disable_intr xe0: MII registers: 0:3000 1:782d 4:01e1 5:40a1 6:0000 xe0: init xe0: enable_intr sio1: type 16550A Jamie Bowden -- "Of course, that's sort of like asking how other than Marketing, Microsoft is different from any other software company..." Kenneth G. Cavness To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 9 9:42:44 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from soda.csua.Berkeley.edu (soda.CSUA.Berkeley.EDU [128.32.43.52]) by builder.freebsd.org (Postfix) with ESMTP id AD94D4043 for ; Wed, 9 Feb 2000 09:42:38 -0800 (PST) Received: from ida-89-77.Reshall.Berkeley.EDU (ida-89-77.Reshall.Berkeley.EDU [169.229.89.77]) by soda.csua.Berkeley.edu (8.8.8/) via ESMTP id JAA07716 for ; Wed, 9 Feb 2000 09:37:22 -0800 (PST) env-from (brian@CSUA.Berkeley.EDU) Date: Wed, 9 Feb 2000 09:37:23 -0800 (PST) From: "Brian W. Buchanan" X-Sender: brian@smarter.than.nu To: freebsd-mobile@freebsd.org Subject: xe0 and -current Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I just purchased an Intel EtherExpress PRO/100 16 bit card and am attempting to use it on my Libretto running -current. I've rebuilt my kernel to include xe0, but can't get the card to attach. # uname -a FreeBSD deimos 4.0-19991216-CURRENT FreeBSD 4.0-19991216-CURRENT #3: Wed Feb 9 09:28:26 PST 2000 brian@deimos:/usr/src/sys/compile/DEIMOS i386 # tail -3 /var/log/messages Feb 9 09:32:31 deimos /kernel: pccard: card inserted, slot 1 Feb 9 09:32:42 deimos /kernel: devclass_alloc_unit: xe0 already exists, using next available unit number Feb 9 09:32:42 deimos pccardd[43]: driver allocation failed for Intel(EtherExpress(TM) PRO/100 PC Card Mobile Adapter16): Device not configured Any hints? -- Brian Buchanan brian@CSUA.Berkeley.EDU -------------------------------------------------------------------------- FreeBSD - The Power to Serve! http://www.freebsd.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 9 10:53:22 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from rover.village.org (rover.village.org [204.144.255.49]) by builder.freebsd.org (Postfix) with ESMTP id 7ADED413A for ; Wed, 9 Feb 2000 10:53:19 -0800 (PST) Received: from harmony.village.org (harmony.village.org [10.0.0.6]) by rover.village.org (8.9.3/8.9.3) with ESMTP id LAA42713; Wed, 9 Feb 2000 11:52:49 -0700 (MST) (envelope-from imp@harmony.village.org) Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id LAA35909; Wed, 9 Feb 2000 11:53:38 -0700 (MST) Message-Id: <200002091853.LAA35909@harmony.village.org> To: "Gail Pickett" Subject: Re: Confused about PCIC Cc: freebsd-mobile@FreeBSD.org In-reply-to: Your message of "Tue, 08 Feb 2000 13:37:54 PST." <200002082137.NAA30464@www.geocrawler.com> References: <200002082137.NAA30464@www.geocrawler.com> Date: Wed, 09 Feb 2000 11:53:37 -0700 From: Warner Losh Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In message <200002082137.NAA30464@www.geocrawler.com> "Gail Pickett" writes: : Is pcic a file or a device? And where do I get : it from as there is no such file on my laptop? What rev of the OS are you using? Older revs have pcic as a loadable device, but it is broken there. You may need to bite the bullet and compile it into your kernel. Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 9 10:54:38 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from rover.village.org (rover.village.org [204.144.255.49]) by builder.freebsd.org (Postfix) with ESMTP id 2D7034157 for ; Wed, 9 Feb 2000 10:54:36 -0800 (PST) Received: from harmony.village.org (harmony.village.org [10.0.0.6]) by rover.village.org (8.9.3/8.9.3) with ESMTP id LAA42721; Wed, 9 Feb 2000 11:54:08 -0700 (MST) (envelope-from imp@harmony.village.org) Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id LAA35929; Wed, 9 Feb 2000 11:54:56 -0700 (MST) Message-Id: <200002091854.LAA35929@harmony.village.org> To: "Brian W. Buchanan" Subject: Re: xe0 and -current Cc: freebsd-mobile@FreeBSD.ORG In-reply-to: Your message of "Wed, 09 Feb 2000 09:37:23 PST." References: Date: Wed, 09 Feb 2000 11:54:56 -0700 From: Warner Losh Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In message "Brian W. Buchanan" writes: : I just purchased an Intel EtherExpress PRO/100 16 bit card and am Are you sure the EtherExpress is a Xircom related card? If so, you are are out of luck for a while. I have one or two things to add to pccard to make it able to support this. Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 9 10:59:23 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from icx.net (icx.net [206.96.250.2]) by builder.freebsd.org (Postfix) with ESMTP id ADD3841A3 for ; Wed, 9 Feb 2000 10:59:19 -0800 (PST) Received: from gail (pm14i.icx.net [216.82.7.168]) by icx.net (IDG-2.7/1.3nr) with SMTP id NAA01712 for ; Wed, 9 Feb 2000 13:58:50 -0500 (EST) Message-Id: <3.0.6.32.20000209140042.0079b100@mailhub.icx.net> X-Sender: gmpicket@mailhub.icx.net X-Mailer: QUALCOMM Windows Eudora Light Version 3.0.6 (32) Date: Wed, 09 Feb 2000 14:00:42 -0500 To: freebsd-mobile@FreeBSD.org From: "Gail M. Pickett" Subject: Re: Confused about PCIC In-Reply-To: <200002091853.LAA35909@harmony.village.org> References: <200002082137.NAA30464@www.geocrawler.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I am using 3.3-release. Gail At 11:53 AM 2/9/00 -0700, you wrote: >In message <200002082137.NAA30464@www.geocrawler.com> "Gail Pickett" writes: >: Is pcic a file or a device? And where do I get >: it from as there is no such file on my laptop? > >What rev of the OS are you using? Older revs have pcic as a loadable >device, but it is broken there. You may need to bite the bullet and >compile it into your kernel. > >Warner > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 9 13:20:39 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from mail2.svr.pol.co.uk (mail2.svr.pol.co.uk [195.92.193.210]) by builder.freebsd.org (Postfix) with ESMTP id ADB6E4290; Wed, 9 Feb 2000 13:20:07 -0800 (PST) Received: from modem-8.passer-angel.dialup.pol.co.uk ([62.137.47.8] helo=lungfish.freeserve.co.uk) by mail2.svr.pol.co.uk with esmtp (Exim 3.13 #0) id 12IeVR-0004ef-00; Wed, 09 Feb 2000 21:18:38 +0000 Received: (from scott@localhost) by lungfish.freeserve.co.uk (8.8.8/8.8.8) id VAA01160; Tue, 8 Feb 2000 21:38:26 GMT (envelope-from scott) Message-ID: <20000208213825.22434@lungfish.freeserve.co.uk> Date: Tue, 8 Feb 2000 21:38:25 +0000 From: Scott Mitchell To: cjclark@home.com Cc: Warner Losh , Kevin Oberman , freebsd-mobile@FreeBSD.ORG, questions@FreeBSD.ORG Subject: Re: Install on DELL Latitude and Xircom CreditCard Ethernet References: <200002052251.OAA12829@ptavv.es.net> <200002060416.VAA12619@harmony.village.org> <20000205232730.B14610@cc942873-a.ewndsr1.nj.home.com> <20000206114217.12519@lungfish.freeserve.co.uk> <20000207163740.A58810@cc942873-a.ewndsr1.nj.home.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.89i In-Reply-To: <20000207163740.A58810@cc942873-a.ewndsr1.nj.home.com>; from Crist J. Clark on Mon, Feb 07, 2000 at 04:37:41PM -0500 X-Operating-System: FreeBSD 2.2.6-RELEASE i386 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Mon, Feb 07, 2000 at 04:37:41PM -0500, Crist J. Clark wrote: > On Sun, Feb 06, 2000 at 11:42:17AM +0000, Scott Mitchell wrote: > > On Sat, Feb 05, 2000 at 11:27:30PM -0500, Crist J. Clark wrote: > > > On Sat, Feb 05, 2000 at 09:16:07PM -0700, Warner Losh wrote: > > > > In message <200002052251.OAA12829@ptavv.es.net> "Kevin Oberman" writes: > > > > : Unfortunately the generic kernel is not built with support for the > > > > : Xircom cards. This is mostly because of conflicts with other drivers, > > > > > > > > No. It isn't built with default because it doesn't work. > > > > > > Whoa!!! Hold on. Xircom CreditCard Ethernet IIps are said to be > > > supported. From > > > http://home.jp.FreeBSD.org/~toshi/PAO3/SUPPORTED.CARDS, > > > > I dunno about PAO, but the IIps is only semi-supported on my stock xe > > driver (which comes with 3.3 and 3.4; you shouldn't need PAO to use it). > > For 'semi-supported' read "it might work, it might not, we haven't worked > > out why yet". Probably shouldn't mention this now, but you'd have been > > better off with a Xircom CE3 card -- not only will it connect to 100Mbit > > networks, but they generally work out of the box with the xe driver. > > I wanted to be able to do 10BaseT (RJ-45) or 10Base2 (BNC). I don't > think I can do that with the CE3. Indeed you can't. > But I did have the choice of getting a Linksys card... but I thought > that the Xircom would be a better choice than a NE2000-clone. :( Guess > that was a bad call. It might not be a total wipeout -- we've had about a 50% success rate with the few CE2 users who've posted on freebsd-xircom. Getting the driver to work for the (easily ten times as many) CE3/CEM56 users has been the priority, though. So you never know, it might just work, or start to work with a little encouragement. I'd get rid of PAO unless you really need it for some other card; it will only complicate diagnosis of any problems. Scott -- =========================================================================== Scott Mitchell | PGP Key ID | "Eagles may soar, but weasels Cambridge, England | 0x54B171B9 | don't get sucked into jet engines" s.mitchell@computer.org | 0xAA775B8B | -- Anon To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 9 16:42:40 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from alpo.whistle.com (alpo.whistle.com [207.76.204.38]) by builder.freebsd.org (Postfix) with ESMTP id 831594288 for ; Wed, 9 Feb 2000 16:42:25 -0800 (PST) Received: from whistle.com (crab.whistle.com [207.76.205.112]) by alpo.whistle.com (8.9.1a/8.9.1) with ESMTP id QAA95067; Wed, 9 Feb 2000 16:41:51 -0800 (PST) Received: (from ambrisko@localhost) by whistle.com (8.9.3/8.9.1) id QAA77975; Wed, 9 Feb 2000 16:41:27 -0800 (PST) (envelope-from ambrisko) From: Doug Ambrisko Message-Id: <200002100041.QAA77975@whistle.com> Subject: Updated patches for pccard ata driver -current To: imp@village.org, freebsd-mobile@freebsd.org Date: Wed, 9 Feb 2000 16:41:27 -0800 (PST) X-Mailer: ELM [version 2.4ME+ PL61 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org This is for last nights -current (nuke any other patches). I still don't have detach/removal working but might be closer to that now. It's based on Warner latest patches so flash cards should work. I verified it works with my external hard drive and cdrom. Doug A. Index: ata-all.c =================================================================== RCS file: /cvs/freebsd/src/sys/dev/ata/ata-all.c,v retrieving revision 1.47 diff -c -r1.47 ata-all.c *** ata-all.c 2000/02/04 10:20:20 1.47 --- ata-all.c 2000/02/10 00:31:09 *************** *** 30,35 **** --- 30,36 ---- #include "ata.h" #include "apm.h" + #include "card.h" #include "isa.h" #include "pci.h" #include "atadisk.h" *************** *** 88,93 **** --- 89,103 ---- static void btrim(int8_t *, int32_t); static void bpack(int8_t *, int8_t *, int32_t); + #if NCARD > 0 + static int ata_pccard_attach __P((device_t dev)); + static int ata_pccard_detach __P((device_t dev)); + static int ata_pccard_probe __P((device_t dev)); + /* XXX */ + extern void ad_drvinit(void); + extern void atapi_init(void); + #endif /* NCARD > 0 */ + /* local vars */ static int32_t atanlun = 2; static struct intr_config_hook *ata_attach_hook = NULL; *************** *** 187,192 **** --- 197,332 ---- DRIVER_MODULE(ata, isa, ata_isa_driver, ata_devclass, 0, 0); #endif + #if NCARD > 0 + static int + ata_pccard_probe(dev) + device_t dev; + { + struct resource *port; + int rid; + int32_t res; + int32_t lun; + static struct intr_config_hook *tmp; + + /* Allocate the port range */ + rid = 0; + port = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 0, ~0, 16, RF_ACTIVE); + /* XXX 16 shouldn't be hard coded */ + + if (!port) + return (ENOMEM); + + /* don't worry about conflict since PCCard code should have checked + already */ + /* + * XXX ALTPORT not used in pccard XXX + * Here's the i/o map for isa vs pccard + * Offset isa pccard + * DATA 0 0 + * ERROR 1 1 R + * FEATURE 1 1 W + * COUNT 2 2 W + * IREASON 2 2 R + * SECTOR 3 3 + * CYL_LSB 4 4 + * CYL_MSB 5 5 + * DRIVE 6 6 + * CMD 7 7 + * STATUS 7 7 + * ALTSTATUS 206 8 R + * CTLR 206 8 W + * wd_digin 207 9 + */ + + /* trick ata_probe to not queue up interrupts since interupts + are active now */ + tmp=ata_attach_hook; + ata_attach_hook = 1; + + res = ata_probe(rman_get_start(port), + rman_get_start(port) + ATA_ALTPORT_ONE_WINDOW, 0, dev, &lun); + + /* restore hook */ + ata_attach_hook = tmp; + + bus_release_resource(dev, SYS_RES_IOPORT, rid, port); + + if (res) { + isa_set_portsize(dev, res); + *(int *)device_get_softc(dev) = lun; + atadevices[lun]->flags |= ATA_USE_16BIT; + return 0; + } + return ENXIO; + } + + static int + ata_pccard_attach(dev) + device_t dev; + { + struct resource *port; + struct resource *irq; + void *ih; + int iorid; + int irqrid; + int status; + + /* Allocate the port range and interrupt */ + iorid = 0; + port = bus_alloc_resource(dev, SYS_RES_IOPORT, &iorid, 0, ~0, 1, + RF_ACTIVE); + if (!port) { + /* XXX Need to free things ? */ + return (ENOMEM); + } + + irqrid = 0; + irq = bus_alloc_resource(dev, SYS_RES_IRQ, &irqrid, 0, ~0, 1, RF_ACTIVE); + if (!irq) { + /* XXX Need to free things ? */ + bus_release_resource(dev, SYS_RES_IOPORT, iorid, port); + return (ENOMEM); + } + status = bus_setup_intr(dev, irq, INTR_TYPE_BIO, ataintr, + atadevices[*(int *)device_get_softc(dev)], &ih); + + /* XXX The following really should just scan *THIS* device XXX */ + /* XXX Also, we need to do more than just ad XXX */ + + if (status == 0) { + ata_attach(dev); + } + return status; + } + + + static int + ata_pccard_detach(dev) + device_t dev; + { + printf("I can't be dettached ata\n"); + return EIO; + } + + + static device_method_t ata_pccard_methods[] = { + /* Device interface */ + DEVMETHOD(device_probe, ata_pccard_probe), + DEVMETHOD(device_attach, ata_pccard_attach), + DEVMETHOD(device_detach, ata_pccard_detach), + + { 0, 0 } + }; + + static driver_t ata_pccard_driver = { + "ata", + ata_pccard_methods, + sizeof(int), + }; + + DRIVER_MODULE(ata, pccard, ata_pccard_driver, ata_devclass, 0, 0); + #endif (NCARD > 0) + #if NPCI > 0 static const char * ata_pcimatch(device_t dev) *************** *** 655,661 **** * of non-exsistent devices and thereby long delays */ for (ctlr=0; ctlrdevices & ATA_ATA_SLAVE) if (ata_getparam(atadevices[ctlr], ATA_SLAVE, ATA_C_ATA_IDENTIFY)) atadevices[ctlr]->devices &= ~ATA_ATA_SLAVE; --- 795,802 ---- * of non-exsistent devices and thereby long delays */ for (ctlr=0; ctlrdevices & ATA_PROBED)) continue; if (atadevices[ctlr]->devices & ATA_ATA_SLAVE) if (ata_getparam(atadevices[ctlr], ATA_SLAVE, ATA_C_ATA_IDENTIFY)) atadevices[ctlr]->devices &= ~ATA_ATA_SLAVE; *************** *** 673,679 **** #if NATADISK > 0 /* now we know whats there, do the real attach, first the ATA disks */ for (ctlr=0; ctlrdevices & ATA_ATA_MASTER) ad_attach(atadevices[ctlr], ATA_MASTER); if (atadevices[ctlr]->devices & ATA_ATA_SLAVE) --- 814,821 ---- #if NATADISK > 0 /* now we know whats there, do the real attach, first the ATA disks */ for (ctlr=0; ctlrdevices & ATA_PROBED)) continue; if (atadevices[ctlr]->devices & ATA_ATA_MASTER) ad_attach(atadevices[ctlr], ATA_MASTER); if (atadevices[ctlr]->devices & ATA_ATA_SLAVE) *************** *** 683,695 **** #if NATAPICD > 0 || NATAPIFD > 0 || NATAPIST > 0 /* then the atapi devices */ for (ctlr=0; ctlrdevices & ATA_ATAPI_MASTER) atapi_attach(atadevices[ctlr], ATA_MASTER); if (atadevices[ctlr]->devices & ATA_ATAPI_SLAVE) atapi_attach(atadevices[ctlr], ATA_SLAVE); } #endif if (ata_attach_hook) { config_intrhook_disestablish(ata_attach_hook); free(ata_attach_hook, M_ATA); --- 825,843 ---- #if NATAPICD > 0 || NATAPIFD > 0 || NATAPIST > 0 /* then the atapi devices */ for (ctlr=0; ctlrdevices & ATA_PROBED)) continue; if (atadevices[ctlr]->devices & ATA_ATAPI_MASTER) atapi_attach(atadevices[ctlr], ATA_MASTER); if (atadevices[ctlr]->devices & ATA_ATAPI_SLAVE) atapi_attach(atadevices[ctlr], ATA_SLAVE); } #endif + /* mark all current controllers probed for devices */ + for (ctlr=0; ctlrdevices |= ATA_PROBED; + } if (ata_attach_hook) { config_intrhook_disestablish(ata_attach_hook); free(ata_attach_hook, M_ATA); Index: ata-all.h =================================================================== RCS file: /cvs/freebsd/src/sys/dev/ata/ata-all.h,v retrieving revision 1.23 diff -c -r1.23 ata-all.h *** ata-all.h 2000/01/28 13:35:42 1.23 --- ata-all.h 2000/02/10 00:31:09 *************** *** 87,92 **** --- 87,93 ---- #define ATA_S_BUSY 0x80 /* busy */ #define ATA_ALTPORT 0x206 /* alternate Status register */ + #define ATA_ALTPORT_ONE_WINDOW 0x08 /* Alternate port for pccard */ #define ATA_A_IDS 0x02 /* disable interrupts */ #define ATA_A_RESET 0x04 /* RESET controller */ #define ATA_A_4BIT 0x08 /* 4 head bits */ *************** *** 281,286 **** --- 282,288 ---- #define ATA_ATA_SLAVE 0x02 #define ATA_ATAPI_MASTER 0x04 #define ATA_ATAPI_SLAVE 0x08 + #define ATA_PROBED 0x10 u_int8_t status; /* last controller status */ u_int8_t error; /* last controller error */ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 9 17: 0:44 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from rover.village.org (rover.village.org [204.144.255.49]) by builder.freebsd.org (Postfix) with ESMTP id 09BE24183 for ; Wed, 9 Feb 2000 17:00:40 -0800 (PST) Received: from harmony.village.org (harmony.village.org [10.0.0.6]) by rover.village.org (8.9.3/8.9.3) with ESMTP id SAA43771; Wed, 9 Feb 2000 18:00:12 -0700 (MST) (envelope-from imp@harmony.village.org) Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id SAA37788; Wed, 9 Feb 2000 18:01:03 -0700 (MST) Message-Id: <200002100101.SAA37788@harmony.village.org> To: Doug Ambrisko Subject: Re: Updated patches for pccard ata driver -current Cc: freebsd-mobile@freebsd.org In-reply-to: Your message of "Wed, 09 Feb 2000 16:41:27 PST." <200002100041.QAA77975@whistle.com> References: <200002100041.QAA77975@whistle.com> Date: Wed, 09 Feb 2000 18:01:03 -0700 From: Warner Losh Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In message <200002100041.QAA77975@whistle.com> Doug Ambrisko writes: : This is for last nights -current (nuke any other patches). I still don't : have detach/removal working but might be closer to that now. It's based : on Warner latest patches so flash cards should work. I verified it works : with my external hard drive and cdrom. Thanks Doug. I'll test these tonight and get them committed to the tree before 4.0. I noticed a couple of tweaks that might be needed, but it is high time this get into the tree. Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 9 18:48:47 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from grace.speakeasy.org (grace.speakeasy.org [216.254.0.2]) by builder.freebsd.org (Postfix) with ESMTP id 38C674301 for ; Wed, 9 Feb 2000 18:48:45 -0800 (PST) Received: from mjw-1.dsl.speakeasy.net (mjw-1.dsl.speakeasy.net [216.231.36.128]) by grace.speakeasy.org (8.9.3/8.9.3) with ESMTP id SAA29414 for ; Wed, 9 Feb 2000 18:48:19 -0800 Date: Wed, 09 Feb 2000 21:46:19 -0500 From: Matt White To: freebsd-mobile@freebsd.org Subject: Realport support? Message-ID: <945006694.950132779@mjw-1.dsl.speakeasy.net> X-Mailer: Mulberry (Win32) [2.0.0b7, s/n S-100002] MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Is the Xircom Cardbus Realport 10/100 card on the list of cards to get working as part of the glorious cardbus project? If not, could it be added? How's the project going? Anything I could do to help out? -Matt To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 9 19:32: 6 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from rover.village.org (rover.village.org [204.144.255.49]) by builder.freebsd.org (Postfix) with ESMTP id 8FEC942E3 for ; Wed, 9 Feb 2000 19:32:03 -0800 (PST) Received: from harmony.village.org (harmony.village.org [10.0.0.6]) by rover.village.org (8.9.3/8.9.3) with ESMTP id UAA44307; Wed, 9 Feb 2000 20:31:38 -0700 (MST) (envelope-from imp@harmony.village.org) Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id UAA38727; Wed, 9 Feb 2000 20:32:30 -0700 (MST) Message-Id: <200002100332.UAA38727@harmony.village.org> To: "Gail M. Pickett" Subject: Re: Confused about PCIC Cc: freebsd-mobile@FreeBSD.ORG In-reply-to: Your message of "Wed, 09 Feb 2000 14:00:42 EST." <3.0.6.32.20000209140042.0079b100@mailhub.icx.net> References: <3.0.6.32.20000209140042.0079b100@mailhub.icx.net> <200002082137.NAA30464@www.geocrawler.com> Date: Wed, 09 Feb 2000 20:32:29 -0700 From: Warner Losh Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In message <3.0.6.32.20000209140042.0079b100@mailhub.icx.net> "Gail M. Pickett" writes: : I am using 3.3-release. 3.3 built the pcic module, but one couldn't load it into the kernel successfully, IIRC. You'll need to add pcic to your kernel config file. Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 9 19:33:16 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from rover.village.org (rover.village.org [204.144.255.49]) by builder.freebsd.org (Postfix) with ESMTP id 61F62433C for ; Wed, 9 Feb 2000 19:33:13 -0800 (PST) Received: from harmony.village.org (harmony.village.org [10.0.0.6]) by rover.village.org (8.9.3/8.9.3) with ESMTP id UAA44316; Wed, 9 Feb 2000 20:32:47 -0700 (MST) (envelope-from imp@harmony.village.org) Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id UAA38747; Wed, 9 Feb 2000 20:33:40 -0700 (MST) Message-Id: <200002100333.UAA38747@harmony.village.org> To: Matt White Subject: Re: Realport support? Cc: freebsd-mobile@FreeBSD.ORG In-reply-to: Your message of "Wed, 09 Feb 2000 21:46:19 EST." <945006694.950132779@mjw-1.dsl.speakeasy.net> References: <945006694.950132779@mjw-1.dsl.speakeasy.net> Date: Wed, 09 Feb 2000 20:33:40 -0700 From: Warner Losh Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In message <945006694.950132779@mjw-1.dsl.speakeasy.net> Matt White writes: : Is the Xircom Cardbus Realport 10/100 card on the list of cards to get : working as part of the glorious cardbus project? If not, could it be : added? How's the project going? Anything I could do to help out? Yes. N/A. Slowly due to work and release pressures. Not sure what would be best at this point, likely start reading and understanding the dev/pccard and dev/pcic code. Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 9 19:34:28 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from rover.village.org (rover.village.org [204.144.255.49]) by builder.freebsd.org (Postfix) with ESMTP id B368C437E for ; Wed, 9 Feb 2000 19:34:23 -0800 (PST) Received: from harmony.village.org (harmony.village.org [10.0.0.6]) by rover.village.org (8.9.3/8.9.3) with ESMTP id UAA44324 for ; Wed, 9 Feb 2000 20:33:56 -0700 (MST) (envelope-from imp@harmony.village.org) Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id UAA38770 for ; Wed, 9 Feb 2000 20:34:49 -0700 (MST) Message-Id: <200002100334.UAA38770@harmony.village.org> To: mobile@freebsd.org Subject: Installing on laptops, a question Date: Wed, 09 Feb 2000 20:34:49 -0700 From: Warner Losh Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I just had a frustrating experience trying to install onto a laptop at a local university. Would anybody object if I added an option to sysinstall that would allow one to tell it to tell pccard which irqs to use for pccards (AND NO OTHER IRQs)? Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 9 20:16:42 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from mjw-0.dsl.speakeasy.net (mjw-0.dsl.speakeasy.net [216.231.36.127]) by builder.freebsd.org (Postfix) with ESMTP id B4123437B for ; Wed, 9 Feb 2000 20:16:38 -0800 (PST) Received: (from worlock@localhost) by mjw-0.dsl.speakeasy.net (8.9.3/8.9.3) id XAA01452; Wed, 9 Feb 2000 23:12:02 -0500 (EST) (envelope-from worlock) Date: Wed, 9 Feb 2000 23:12:02 -0500 (EST) From: Worlock Message-Id: <200002100412.XAA01452@mjw-0.dsl.speakeasy.net> To: freebsd-mobile@FreeBSD.ORG Subject: Re: Realport support? In-Reply-To: <200002100333.UAA38747@harmony.village.org> References: <945006694.950132779@mjw-1.dsl.speakeasy.net> <200002100333.UAA38747@harmony.village.org> Reply-To: worlock+usenet@dhp.com Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In mail.freebsd.mobile, you wrote: >In message <945006694.950132779@mjw-1.dsl.speakeasy.net> Matt White writes: >: Is the Xircom Cardbus Realport 10/100 card on the list of cards to get >: working as part of the glorious cardbus project? If not, could it be >: added? How's the project going? Anything I could do to help out? > >Yes. N/A. Slowly due to work and release pressures. Not sure what >would be best at this point, likely start reading and understanding >the dev/pccard and dev/pcic code. Sure, I can do that. -Matt To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 9 20:56:14 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from freebie.lemis.com (freebie.lemis.com [192.109.197.137]) by builder.freebsd.org (Postfix) with ESMTP id 447ED430F for ; Wed, 9 Feb 2000 20:56:10 -0800 (PST) Received: (from grog@localhost) by freebie.lemis.com (8.9.3/8.9.0) id PAA68289; Thu, 10 Feb 2000 15:26:14 +1030 (CST) Date: Thu, 10 Feb 2000 15:26:14 +1030 From: Greg Lehey To: Warner Losh Cc: FreeBSD mobile Mailing List Subject: Re: Installing on laptops, a question Message-ID: <20000210152614.F67060@freebie.lemis.com> References: <200002100334.UAA38770@harmony.village.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: <200002100334.UAA38770@harmony.village.org> WWW-Home-Page: http://www.lemis.com/~grog X-PGP-Fingerprint: 6B 7B C3 8C 61 CD 54 AF 13 24 52 F8 6D A4 95 EF Organization: LEMIS, PO Box 460, Echunga SA 5153, Australia Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-41-739-7062 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Wednesday, 9 February 2000 at 20:34:49 -0700, Warner Losh wrote: > > I just had a frustrating experience trying to install onto a laptop at > a local university. Would anybody object if I added an option to > sysinstall that would allow one to tell it to tell pccard which irqs > to use for pccards (AND NO OTHER IRQs)? No, sounds like a good idea to me. Greg -- Finger grog@lemis.com for PGP public key See complete headers for address and phone numbers To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Feb 10 3:14:48 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from ns.skylink.it (ns.skylink.it [194.177.113.1]) by builder.freebsd.org (Postfix) with ESMTP id C720C4425 for ; Thu, 10 Feb 2000 03:14:34 -0800 (PST) Received: from kim.ispra.webweaving.org (va-163.skylink.it [194.185.55.163]) by ns.skylink.it (8.9.1/8.8.8) with ESMTP id MAA13007; Thu, 10 Feb 2000 12:16:01 +0100 Received: from webweaving.org (burly.ispra.webweaving.org [10.0.0.21]) by kim.ispra.webweaving.org (8.8.8/8.8.5) with ESMTP id LAA16899; Thu, 10 Feb 2000 11:00:29 GMT X-Passed: MX on Ispra.WebWeaving.org Thu, 10 Feb 2000 11:00:29 GMT and masked X-No-Spam: Neither the receipients nor the senders email address(s) are to be used for Unsolicited (Commercial) Email without the explicit written consent of either party; as a per-message fee is incurred for inbound and outbound traffic to the originator. Posted-Date: Thu, 10 Feb 2000 11:00:29 GMT Message-ID: <38A29A4D.A6B717FE@webweaving.org> Date: Thu, 10 Feb 2000 12:00:30 +0100 From: Dirk-Willem van Gulik Reply-To: dirkx@webweaving.org Organization: WebWeaving Consultancy X-Mailer: Mozilla 4.7 (Macintosh; I; PPC) X-Accept-Language: en MIME-Version: 1.0 To: Warner Losh Cc: mobile@FreeBSD.ORG Subject: Re: Installing on laptops, a question References: <200002100334.UAA38770@harmony.village.org> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Warner Losh wrote: > > I just had a frustrating experience trying to install onto a laptop at > a local university. Would anybody object if I added an option to > sysinstall that would allow one to tell it to tell pccard which irqs > to use for pccards (AND NO OTHER IRQs)? yes, Yes, YES ! I recognize this. Compaq's have this problem too. PnP screwwy. Please Dw To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Feb 10 4: 6:50 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from ns.sagem.com (frontal.sagem.com [62.160.59.33]) by builder.freebsd.org (Postfix) with ESMTP id A67A3440F for ; Thu, 10 Feb 2000 04:06:30 -0800 (PST) Received: (from uucp@localhost) by ns.sagem.com (8.9.3/8.9.3/at-19991104) with UUCP id NAA19501; Thu, 10 Feb 2000 13:10:57 +0100 From: robert.brive@sagem.com Received: from mlksrv61.mlk ([134.20.0.40]) by acces_in.sagem.fr (8.9.3/8.9.3/cc-19990810) with SMTP id NAA19097; Thu, 10 Feb 2000 13:09:20 +0100 Received: from 134.20.0.216 by mlksrv61.mlk (InterScan E-Mail VirusWall NT); Thu, 10 Feb 2000 13:04:35 +0100 (Paris, Madrid) Received: by delta.sagem.com(Lotus SMTP MTA v4.6.4 (830.2 3-23-1999)) id C1256881.00425DD1 ; Thu, 10 Feb 2000 13:04:53 +0100 X-Lotus-FromDomain: SAGEM Reply-To: dirkx@webweaving.org To: Warner Losh Cc: mobile@FreeBSD.ORG Message-ID: Date: Thu, 10 Feb 2000 13:04:04 +0100 Subject: Re: Installing on laptops, a question Mime-Version: 1.0 Content-type: multipart/mixed; Boundary="0__=kyDaWGEHGLhGR97XEN4w0AUp7KYBWBZzeVif9gVKQ6YtL7wRXNwb18fS" Content-Disposition: inline Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org --0__=kyDaWGEHGLhGR97XEN4w0AUp7KYBWBZzeVif9gVKQ6YtL7wRXNwb18fS Content-type: text/plain; charset=us-ascii Content-Disposition: inline Warner Losh wrote: > > I just had a frustrating experience trying to install onto a laptop at > a local university. Would anybody object if I added an option to > sysinstall that would allow one to tell it to tell pccard which irqs > to use for pccards (AND NO OTHER IRQs)? yes, Yes, YES ! I recognize this. Compaq's have this problem too. PnP screwwy. Please Dw To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message --0__=kyDaWGEHGLhGR97XEN4w0AUp7KYBWBZzeVif9gVKQ6YtL7wRXNwb18fS Content-type: application/octet-stream; name="att1.eml" Content-Disposition: attachment; filename="att1.eml" Content-transfer-encoding: base64 UmVjZWl2ZWQ6IGZyb20gbWxrc3J2NjEubWxrIChbMTM0LjIwLjAuNDBdKSBieSBkZWx0YS5zYWdl bS5jb20gKExvdHVzIFNNVFAgTVRBIHY0LjYuNCAgKDgzMC4yIDMtMjMtMTk5OSkpIHdpdGggU01U UCBpZCBDMTI1Njg4MS4wMDNFMDk2ODsgVGh1LCAxMCBGZWIgMjAwMCAxMjoxNzozNiArMDEwMA0K UmVjZWl2ZWQ6IGZyb20gMTM0LjIwLjMuMjE0IGJ5IG1sa3NydjYxLm1sayAoSW50ZXJTY2FuIEUt TWFpbCBWaXJ1c1dhbGwgTlQpOyBUaHUsIDEwIEZlYiAyMDAwIDEyOjE3OjExICswMTAwIChQYXJp cywgTWFkcmlkKQ0KUmVjZWl2ZWQ6IChmcm9tIHV1Y3BAbG9jYWxob3N0KQ0KCWJ5IGFjY2VzMi5z YWdlbS5mciAoOC45LjMvOC45LjMvY2MtMTk5OTA4MTApIHdpdGggVVVDUCBpZCBNQUEyNjEyNg0K CWZvciBicml2ZUBzYWdlbS5jb207IFRodSwgMTAgRmViIDIwMDAgMTI6MjM6MDAgKzAxMDANClJl Y2VpdmVkOiBmcm9tIHBhY3RvbGUuc2FnZW0uZnIgKHBhY3RvbGUuc2FnZW0uZnIgWzE5NC4zLjE4 Ni42NV0pDQoJYnkgZnJvbnRhbDIuc2FnZW0uY29tICg4LjkuMy84LjkuMy9hdC0xOTk5MTEwNCkg d2l0aCBFU01UUCBpZCBNQUEyNDE0MA0KCWZvciA8YnJpdmVAc2FnZW0uY29tPjsgVGh1LCAxMCBG ZWIgMjAwMCAxMjoyMDo0OSArMDEwMA0KUmVjZWl2ZWQ6IChmcm9tIGRhZW1vbkBsb2NhbGhvc3Qp DQoJYnkgcGFjdG9sZS5zYWdlbS5mciAoOC45LjMvOC45LjMpIGlkIE1BQTgwNjMyDQoJZm9yIGJy aXZlQHNhZ2VtLmNvbTsgVGh1LCAxMCBGZWIgMjAwMCAxMjowNTowOSArMDEwMCAoQ0VUKQ0KUmVj ZWl2ZWQ6IGZyb20gYnVpbGRlci5mcmVlYnNkLm9yZyAoYnVpbGRlci5GcmVlQlNELk9SRyBbMjA0 LjIxNi4yNy4yNF0pDQoJYnkgcGFjdG9sZS5zYWdlbS5mciAoOC45LjMvOC45LjMpIHdpdGggRVNN VFAgaWQgTUFBODA2MjgNCglmb3IgPGJyaXZlQHNhZ2VtLmZyPjsgVGh1LCAxMCBGZWIgMjAwMCAx MjowNTowNyArMDEwMCAoQ0VUKQ0KUmVjZWl2ZWQ6IGJ5IGJ1aWxkZXIuZnJlZWJzZC5vcmcgKFBv c3RmaXgsIGZyb20gdXNlcmlkIDUzOCkNCglpZCAzMTM5QzQ0MzI7IFRodSwgMTAgRmViIDIwMDAg MDM6MTQ6NDggLTA4MDAgKFBTVCkNClJlY2VpdmVkOiBmcm9tIGxvY2FsaG9zdCAobG9jYWxob3N0 IFsxMjcuMC4wLjFdKQ0KCWJ5IGJ1aWxkZXIuZnJlZWJzZC5vcmcgKFBvc3RmaXgpIHdpdGggU01U UA0KCWlkIDFCNzVERTA7IFRodSwgMTAgRmViIDIwMDAgMDM6MTQ6NDcgLTA4MDAgKFBTVCkNClJl Y2VpdmVkOiBieSBidWlsZGVyLmZyZWVic2Qub3JnIChidWxrX21haWxlciB2MS4xMik7IFRodSwg MTAgRmViIDIwMDAgMDM6MTQ6NDcgLTA4MDANCkRlbGl2ZXJlZC1UbzogZnJlZWJzZC1tb2JpbGVA ZnJlZWJzZC5vcmcNClJlY2VpdmVkOiBmcm9tIG5zLnNreWxpbmsuaXQgKG5zLnNreWxpbmsuaXQg WzE5NC4xNzcuMTEzLjFdKQ0KCWJ5IGJ1aWxkZXIuZnJlZWJzZC5vcmcgKFBvc3RmaXgpIHdpdGgg RVNNVFAgaWQgQzcyMEM0NDI1DQoJZm9yIDxtb2JpbGVARnJlZUJTRC5PUkc+OyBUaHUsIDEwIEZl YiAyMDAwIDAzOjE0OjM0IC0wODAwIChQU1QpDQpSZWNlaXZlZDogZnJvbSBraW0uaXNwcmEud2Vi d2VhdmluZy5vcmcgKHZhLTE2My5za3lsaW5rLml0IFsxOTQuMTg1LjU1LjE2M10pDQoJYnkgbnMu c2t5bGluay5pdCAoOC45LjEvOC44LjgpIHdpdGggRVNNVFAgaWQgTUFBMTMwMDc7DQoJVGh1LCAx MCBGZWIgMjAwMCAxMjoxNjowMSArMDEwMA0KUmVjZWl2ZWQ6IGZyb20gd2Vid2VhdmluZy5vcmcg KGJ1cmx5LmlzcHJhLndlYndlYXZpbmcub3JnIFsxMC4wLjAuMjFdKQ0KCWJ5IGtpbS5pc3ByYS53 ZWJ3ZWF2aW5nLm9yZyAoOC44LjgvOC44LjUpIHdpdGggRVNNVFAgaWQgTEFBMTY4OTk7DQoJVGh1 LCAxMCBGZWIgMjAwMCAxMTowMDoyOSBHTVQNClgtUGFzc2VkOiBNWCBvbiBJc3ByYS5XZWJXZWF2 aW5nLm9yZyBUaHUsIDEwIEZlYiAyMDAwIDExOjAwOjI5IEdNVCBhbmQgbWFza2VkDQpYLU5vLVNw YW06IE5laXRoZXIgdGhlIHJlY2VpcGllbnRzIG5vciB0aGUgc2VuZGVycyBlbWFpbCBhZGRyZXNz KHMpIGFyZQ0KCXRvIGJlIHVzZWQgZm9yIFVuc29saWNpdGVkIChDb21tZXJjaWFsKSBFbWFpbCB3 aXRob3V0IHRoZQ0KCWV4cGxpY2l0IHdyaXR0ZW4gY29uc2VudCBvZiBlaXRoZXIgcGFydHk7IGFz IGEgcGVyLW1lc3NhZ2UNCglmZWUgaXMgaW5jdXJyZWQgZm9yIGluYm91bmQgYW5kIG91dGJvdW5k IHRyYWZmaWMgdG8gdGhlIG9yaWdpbmF0b3IuDQpQb3N0ZWQtRGF0ZTogVGh1LCAxMCBGZWIgMjAw MCAxMTowMDoyOSBHTVQNCk1lc3NhZ2UtSUQ6IDwzOEEyOUE0RC5BNkI3MTdGRUB3ZWJ3ZWF2aW5n Lm9yZz4NCkRhdGU6IFRodSwgMTAgRmViIDIwMDAgMTI6MDA6MzAgKzAxMDANCkZyb206IERpcmst V2lsbGVtIHZhbiBHdWxpayA8ZGlya3hAd2Vid2VhdmluZy5vcmc+DQpSZXBseS1UbzogZGlya3hA d2Vid2VhdmluZy5vcmcNCk9yZ2FuaXphdGlvbjogV2ViV2VhdmluZyBDb25zdWx0YW5jeQ0KWC1N YWlsZXI6IE1vemlsbGEgNC43IChNYWNpbnRvc2g7IEk7IFBQQykNClgtQWNjZXB0LUxhbmd1YWdl OiBlbg0KTUlNRS1WZXJzaW9uOiAxLjANClRvOiBXYXJuZXIgTG9zaCA8aW1wQHZpbGxhZ2Uub3Jn Pg0KQ2M6IG1vYmlsZUBGcmVlQlNELk9SRw0KU3ViamVjdDogUmU6IEluc3RhbGxpbmcgb24gbGFw dG9wcywgYSBxdWVzdGlvbg0KUmVmZXJlbmNlczogPDIwMDAwMjEwMDMzNC5VQUEzODc3MEBoYXJt b255LnZpbGxhZ2Uub3JnPg0KQ29udGVudC1UeXBlOiB0ZXh0L3BsYWluOyBjaGFyc2V0PXVzLWFz Y2lpDQpDb250ZW50LVRyYW5zZmVyLUVuY29kaW5nOiA3Yml0DQpTZW5kZXI6IG93bmVyLWZyZWVi c2QtbW9iaWxlQEZyZWVCU0QuT1JHDQpYLUxvb3A6IEZyZWVCU0Qub3JnDQpQcmVjZWRlbmNlOiBi dWxrDQoNCg0KDQpXYXJuZXIgTG9zaCB3cm90ZToNCj4gDQo+IEkganVzdCBoYWQgYSBmcnVzdHJh dGluZyBleHBlcmllbmNlIHRyeWluZyB0byBpbnN0YWxsIG9udG8gYSBsYXB0b3AgYXQNCj4gYSBs b2NhbCB1bml2ZXJzaXR5LiAgV291bGQgYW55Ym9keSBvYmplY3QgaWYgSSBhZGRlZCBhbiBvcHRp b24gdG8NCj4gc3lzaW5zdGFsbCB0aGF0IHdvdWxkIGFsbG93IG9uZSB0byB0ZWxsIGl0IHRvIHRl bGwgcGNjYXJkIHdoaWNoIGlycXMNCj4gdG8gdXNlIGZvciBwY2NhcmRzIChBTkQgTk8gT1RIRVIg SVJRcyk/DQoNCnllcywgWWVzLCBZRVMgISBJIHJlY29nbml6ZSB0aGlzLiBDb21wYXEncyBoYXZl IHRoaXMgcHJvYmxlbSB0b28uIFBuUCBzY3Jld3d5Lg0KDQoJUGxlYXNlDQoNCgkJRHcNCg0KDQpU byBVbnN1YnNjcmliZTogc2VuZCBtYWlsIHRvIG1ham9yZG9tb0BGcmVlQlNELm9yZw0Kd2l0aCAi dW5zdWJzY3JpYmUgZnJlZWJzZC1tb2JpbGUiIGluIHRoZSBib2R5IG9mIHRoZSBtZXNzYWdlDQo= --0__=kyDaWGEHGLhGR97XEN4w0AUp7KYBWBZzeVif9gVKQ6YtL7wRXNwb18fS-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Feb 10 5:27:46 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from mars.siad.net (mail.siad.net [207.105.242.58]) by builder.freebsd.org (Postfix) with ESMTP id 7DB353F89 for ; Thu, 10 Feb 2000 05:27:33 -0800 (PST) Received: from siad.net (localhost [127.0.0.1]) by mars.siad.net (8.9.3/8.9.3) with ESMTP id FAA38585 for ; Thu, 10 Feb 2000 05:38:45 GMT (envelope-from don@siad.net) Message-ID: <38A24EE5.6CD2C2C5@siad.net> Date: Thu, 10 Feb 2000 05:38:45 +0000 From: "Don L. Belcher" Organization: SIAD, Inc. X-Mailer: Mozilla 4.7 [en] (X11; I; FreeBSD 3.4-RELEASE i386) X-Accept-Language: zh-TW, en MIME-Version: 1.0 To: freebsd-mobile@FreeBSD.ORG Subject: Cardbus Attribute memory access problem? Content-Type: multipart/mixed; boundary="------------D724008792CEB1440D06AB9A" Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org This is a multi-part message in MIME format. --------------D724008792CEB1440D06AB9A Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit I would like to have FreeBSD working on my portable and have network card working. My computer is a EPS Technologies APEX 233 mhz, I don't seem to be reading Attribute memory correctly (maybe not enabled for some reason). I'm sending 6 files as attachmets with information. If you need any more information or this is the wrong email address to ask for help let me know. --------------D724008792CEB1440D06AB9A Content-Type: text/plain; charset=us-ascii; name="EPS_PAO" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="EPS_PAO" # # Sample Laptop Configuration # for lenlen.ntc.keio.ac.jp (Toshiba Libretto 50CT) # Tatsumi Hosokawa # machine "i386" cpu "I586_CPU" #cpu "I686_CPU" ident EPS_PAO maxusers 32 options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, "NFS" req'ed options MFS #Memory Filesystem options MFS_ROOT #MFS usable as root device, "MFS" req'ed options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options SYSVSHM options SYSVSEM options SYSVMSG options USER_LDT #allow user-level control of i386 ldt options "VM86" # If your laptop have not had Windoze95-Ready BIOS, please update it. # Such old BIOS'es sometimes have critical bugs at 32-bit protected # mode APM BIOS interface (which have not used by Windoze 3.1). # PC-card suspend/resume support (experimental) #options APM_PCCARD_RESUME options PCIC_RESUME_RESET # Keep power for serial cards when the system suspends # (If your machine hangs up when you try to suspend the system with # FAX/Modem PCMCIA card, uncomment this option). #options SIO_SUSP_KEEP_PWR # Detach SCSI devices when the SCSI card is removed #options SCSI_DETACH # Detach ATAPI devices when the ATA card is removed options ATAPI_DETACH # Japanese version of WaveLAN PCMCIA uses 2.4GHz band instead of 915MHz # band that US version uses. If you want to use Japanese version of # WaveLAN, uncomment this line, or edit the corresponding config entry # of /etc/pccard.conf. #options "WAVELAN_PCMCIA_24" # Suspend the system when the battery status is "Low" #options "APM_BATT_LOW_SUSPEND" # If you want to use NTP on laptop machines, uncomment the following # option. Current APM implementation affects NTP client. #options "APM_NO_CLOCK_ADJUST" # Some X-servers cannot survive suspend/resume on laptop. # This option kicks her when the system is resumed from suspended mode. #options SYSCONS_VTY_RESUME # PAO Enhanced PCI-PCIC support (experimental) options CB_TEST options FORCE_IRQ_ROUTING config kernel root on wd0 controller isa0 controller pnp0 controller eisa0 controller pci0 # Dont remove these two lines! pseudo-device card 1 # You must use "flags 0x1" when you don't hear any negotiation noise(?) # if you use modem card, or pccardd doesn't read cis tuple, tell you # 'No card in database for"(null)"("(null)")' in case of Cirrus Logic's # pcic is your PC. controller card0 device pcic0 at isa? port 0x3e0 flags 0x1 irq 11 #device pcic0 at isa? port 0x3e0 irq 11 device pcic0 at isa? port 0x3e4 flags irq 11 device pcic1 at isa? port 0x3e2 # for HiNote Ultra II device pcic1 at isa? port 0x3e4 # for Chandra II controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 controller fdc1 at isa? disable port "IO_YEFDC" bio irq 6 disk fd2 at fdc1 drive 0 disk fd3 at fdc1 drive 1 options FDC_YE options "CMD640" # work around CMD640 chip deficiency controller wdc0 at isa? port "IO_WD1" bio irq 14 disk wd0 at wdc0 drive 0 controller wdc1 at isa? port "IO_WD2" bio irq 15 disk wd1 at wdc1 drive 0 controller wdc2 at isa? disable port "IO_WD2" bio irq 15 disk wd2 at wdc2 drive 0 controller wdc3 at isa? disable port "IO_WD2" bio irq 15 disk wd3 at wdc3 drive 0 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device acd0 #IDE CD-ROM device wfd0 #IDE floppy (LS-120) # A single entry for any of these controllers (ncr, ahb, ahc) is # sufficient for any number of installed devices. #controller ncr0 #controller ahb0 #controller ahc0 #controller isp0 #controller dpt0 #controller adv0 at isa? port ? cam irq ? #controller adw0 #controller bt0 at isa? port ? cam irq ? #controller aha0 at isa? port ? cam irq ? # Don't support CAM #controller aic0 at isa? port 0x340 bio irq 11 #controller amd0 #controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 #controller nca0 at isa? port 0x1f88 bio irq 10 #controller nca1 at isa? port 0x350 bio irq 5 #controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 #controller spc0 at isa? port 0x320 bio irq 11 iomem 0xd0000 flags 0x01 # Future domain and Q-logic PC-card SCSI drivers # ported from NetBSD/pc98 (based on NetBSD 1.2) #options SCSI_LOW # XXX: for ncv? and stg? driver #controller ncv0 at isa? port 0x320 bio irq 5 #controller stg0 at isa? port 0x320 bio irq 5 #controller scbus0 #device da0 #device od0 #See LINT for possible `od' options. #device sa0 #device pass0 #device cd0 #Only need one of these, the code dynamically grows #device wt0 at isa? port 0x300 bio irq 5 drq 1 #device mcd0 at isa? port 0x300 bio irq 10 #controller matcd0 at isa? port 0x230 bio #device scd0 at isa? port 0x230 bio # atkbdc0 controlls both the keyboard and the PS/2 mouse controller atkbdc0 at isa? port IO_KBD tty device atkbd0 at isa? tty irq 1 device psm0 at isa? tty irq 12 device vga0 at isa? port ? conflicts # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? tty # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? tty #options XSERVER # support for X server #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Mandatory, don't remove device npx0 at isa? port IO_NPX irq 13 # # Laptop support (see LINT for more options) # device apm0 at isa? # Advanced Power Management #options APM_BROKEN_STATCLOCK # Workaround some buggy APM BIOS device sio0 at isa? port "IO_COM1" tty irq 4 device sio1 at isa? port "IO_COM2" tty irq 3 device sio2 at isa? disable port "IO_COM3" tty irq 5 device sio3 at isa? disable port "IO_COM4" tty irq 9 device sio4 at isa? disable port "IO_COM3" tty irq 5 #device mse0 at isa? port 0x23c tty irq 5 # Parallel port device ppc0 at isa? port? net irq 7 controller ppbus0 device nlpt0 at ppbus? device plip0 at ppbus? device ppi0 at ppbus? #controller vpo0 at ppbus? # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. #device ax0 #device de0 #device fxp0 #device mx0 #device pn0 #device rl0 #device tl0 #device tx0 #device vr0 #device vx0 #device wb0 device xl0 device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 device ed1 at isa? disable port 0x300 net irq 10 iomem 0xd8000 #device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 device ep0 at isa? port 0x300 net irq 10 device ep1 at isa? disable port 0x300 net irq 10 #device ex0 at isa? port? net irq? #device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 #device lnc0 at isa? port 0x280 net irq 10 drq 0 #device sn0 at isa? port 0x300 net irq 10 #device sn1 at isa? disable port 0x300 net irq 10 #device wlp0 at isa? port 0x300 net irq 11 #device wlp1 at isa? disable port 0x300 net irq 11 #device cs0 at isa? disable port 0x300 net irq ? #device cnw0 at isa? port 0x300 net irq 5 #device cnw1 at isa? disable port 0x300 net irq 5 # do not enable ze0 and zp0 (these devices are obsolete) ##device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 ##device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 # IBM Smart Capture PCMCIA card #device scc0 #device scc1 # Hitachi microcomputer system Speach Synthesizer card #device hss0 #device hss1 # PCMCIA Joystick device joy0 at isa? port "IO_GAME" pseudo-device loop pseudo-device ether pseudo-device sl 1 # DHCP uses BPF (Berkeley Packet Filter) pseudo-device bpfilter 4 # ijppp uses tun instead of ppp device #pseudo-device ppp 1 pseudo-device vn 1 pseudo-device tun 1 pseudo-device pty 16 pseudo-device gzip # Exec gzipped a.out's options DDB # KTRACE enables the system-call tracing facility ktrace(2). # This adds 4 KB bloat to your kernel, and slightly increases # the costs of each syscall. #options KTRACE #kernel tracing # This provides support for System V shared memory. # # USB support #controller uhci0 #controller ohci0 #controller usb0 # # for the moment we have to specify the priorities of the device # drivers explicitly by the ordering in the list below. This will # be changed in the future. # #device ums0 #device ukbd0 #device ulpt0 #device uhub0 #device ucom0 #device umodem0 #device hid0 #device ugen0 # #options USB_DEBUG #options USBVERBOSE options "P1003_1B" options "_KPOSIX_PRIORITY_SCHEDULING" options "_KPOSIX_VERSION=199309L" # opl: Yamaha OPL-2 and OPL-3 FM - SB, SB Pro, SB 16, ProAudioSpectrum controller snd0 device opl0 at isa? port 0x388 device awe0 at isa? port 0x620 device sbmidi0 at isa? port 0x330 device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr device joy0 at isa? port "IO_GAME" --------------D724008792CEB1440D06AB9A Content-Type: text/plain; charset=us-ascii; name="dmesg.data" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg.data" -1 0 0 0 0 Yes No wdc1 0x170 15 -1 0 0 1 0 Yes No wdc2 0x170 15 -1 0 0 2 0 No No wdc3 0x170 15 -1 0 0 3 0 No No atkbdc0 0x60 -1 -1 0 0 0 0 Yes No atkbd0 0xffffffff 1 -1 0 0 0 0 Yes No psm0 0xffffffff 12 -1 0 0 0 0 Yes No sc0 0xffffffff -1 -1 0 0 0 0 Yes No sio0 0x3f8 4 -1 0 0 0 0 Yes No sio1 0x2f8 3 -1 0 0 1 0 Yes No sio2 0x3e8 5 -1 0 0 2 0 No No sio3 0x2e8 9 -1 0 0 3 0 No No sio4 0x3e8 5 -1 0 0 4 0 No No ppc0 0xffffffff 7 -1 0 0 0 0 Yes No ed0 0x280 10 -1 d8000 0 0 0 Yes No ed1 0x300 10 -1 d8000 0 1 0 No No ep0 0x300 10 -1 0 0 0 0 Yes No ep1 0x300 10 -1 0 0 1 0 No No pcic0 0x3e0 11 -1 d0000 0 0 0x1 Yes No pcic1 0x3e2 -1 -1 0 0 1 0 Yes No Device port irq drq iomem iosize unit flags enab confl pcic1 0x3e4 -1 -1 0 0 1 0 Yes No vga0 0xffffffff -1 -1 0 0 0 0 Yes Yes npx0 0xf0 13 -1 0 0 0 0 Yes No apm0 0xffffffff -1 -1 0 0 0 0 Yes No joy0 0x201 -1 -1 0 0 0 0 Yes No opl0 0x388 -1 -1 0 0 0 0 Yes No awe0 0x620 -1 -1 0 0 0 0 Yes No sbmidi0 0x330 -1 -1 0 0 0 0 Yes No sb0 0x220 5 1 0 0 0 0 Yes No joy0 0x201 -1 -1 0 0 0 0 Yes No Number of EISA slots to probe: 10 config> ls Device port irq drq iomem iosize unit flags enab confl fdc0 0x3f0 6 2 0 0 0 0 Yes No fdc1 0x3a8 6 -1 0 0 1 0 No No wdc0 0x1f0 14 -1 0 0 0 0 Yes No wdc1 0x170 15 -1 0 0 1 0 Yes No wdc2 0x170 15 -1 0 0 2 0 No No wdc3 0x170 15 -1 0 0 3 0 No No atkbdc0 0x60 -1 -1 0 0 0 0 Yes No atkbd0 0xffffffff 1 -1 0 0 0 0 Yes No psm0 0xffffffff 12 -1 0 0 0 0 Yes No sc0 0xffffffff -1 -1 0 0 0 0 Yes No sio0 0x3f8 4 -1 0 0 0 0 Yes No sio1 0x2f8 3 -1 0 0 1 0 Yes No sio2 0x3e8 5 -1 0 0 2 0 No No sio3 0x2e8 9 -1 0 0 3 0 No No sio4 0x3e8 5 -1 0 0 4 0 No No ppc0 0xffffffff 7 -1 0 0 0 0 Yes No ed0 0x280 10 -1 d8000 0 0 0 Yes No ed1 0x300 10 -1 d8000 0 1 0 No No ep0 0x300 10 -1 0 0 0 0 Yes No ep1 0x300 10 -1 0 0 1 0 No No pcic0 0x3e0 11 -1 d0000 0 0 0x1 Yes No pcic1 0x3e2 -1 -1 0 0 1 0 Yes No Device port irq drq iomem iosize unit flags enab confl pcic1 0x3e4 -1 -1 0 0 1 0 Yes No vga0 0xffffffff -1 -1 0 0 0 0 Yes Yes npx0 0xf0 13 -1 0 0 0 0 Yes No apm0 0xffffffff -1 -1 0 0 0 0 Yes No joy0 0x201 -1 -1 0 0 0 0 Yes No opl0 0x388 -1 -1 0 0 0 0 Yes No awe0 0x620 -1 -1 0 0 0 0 Yes No sbmidi0 0x330 -1 -1 0 0 0 0 Yes No sb0 0x220 5 1 0 0 0 0 Yes No joy0 0x201 -1 -1 0 0 0 0 Yes No Number of EISA slots to probe: 10 config> exit avail memory = 127565824 (124576K bytes) Preloaded elf kernel "kernel" at 0xc02d9000. Probing for devices on PCI bus 0: chip0: rev 0x01 on pci0.0.0 chip1: rev 0x01 on pci0.1.0 ELCR2 00 -> 04 ide_pci0: rev 0x01 on pci0.1.1 chip2: rev 0x01 on pci0.1.3 vga0: rev 0xc4 on pci0.6.0 pcic0: rev 0x01 int a irq 255 on pci0.7.0 TI113X PCI Config Reg: [ring enable][speaker enable][CSC parallel isa irq][FUNC pci int] pcic1: rev 0x01 int b irq 255 on pci0.7.1 TI113X PCI Config Reg: [ring enable][speaker enable][CSC parallel isa irq][FUNC pci int] Probing for PnP devices: Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> ed0 not found at 0x280 atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 irq 12 on isa psm0: model Generic PS/2 mouse, device ID 0 sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): wd0: 4887MB (10009440 sectors), 10592 cyls, 15 heads, 63 S/T, 512 B/S wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 0 (atapi): , removable, accel, dma, iordy acd0: drive speed 2416KB/sec, 128KB cache acd0: supported read types: CD-DA acd0: Audio: play, 16 volume levels acd0: Mechanism: ejectable tray acd0: Medium: CD-ROM 120mm photo disc loaded, unlocked wdc1: unit 1 (atapi): , removable, intr, iordis wfd0: medium type unknown (no disk) wfd0: buggy Zip drive, 64-block transfer limit set ppc0 at 0x378 irq 7 on isa ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppi0: on ppbus 0 plip0: on ppbus 0 ep0 not found at 0x300 pcic0 at 0x3e0-0x3e1 irq 11 maddr 0xd0000 flags 0x1 on isa PC-Card ctlr(0) TI PCI-1131 [CardBus bridge mode] (5 mem & 2 I/O windows) pcic0: slot 0 controller I/O address 0x0 pcic0: slot 1 controller I/O address 0x0 pcic1: sharing irq 11 with other pcic pcic1 not found at 0x3e2 pcic1: sharing irq 11 with other pcic pcic1 not found at 0x3e4 vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface apm0 on isa apm: found APM BIOS version 1.2 joy0 at 0x201 on isa joy0: joystick opl0 at 0x388 on isa snd0: awe0 not found at 0x620 sbmidi0 not found at 0x330 sb0 at 0x220 irq 5 drq 1 on isa NOTE! SB Pro support required with your soundcard! snd0: Initializing PC-card drivers: fdc ed ep joy sio wdc Intel Pentium detected, installing workaround for F00F bug changing root device to wd0s2a Card inserted, slot 1 IP packet filtering initialized, divert disabled, rule-based forwarding disabled, logging disabled Card removed, slot 1 Card inserted, slot 1 Card removed, slot 1 Card inserted, slot 0 Card removed, slot 0 Card inserted, slot 0 --------------D724008792CEB1440D06AB9A Content-Type: text/plain; charset=us-ascii; name="dumpcis.data" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dumpcis.data" Code 14 not found Code 14 not found code Unknown ignored Code 105 not found Code 105 not found code Unknown ignored Code 48 not found Code 48 not found code Unknown ignored Configuration data for card in slot 0 Tuple #1, code = 0x0 (Null tuple), length = 0 Tuple #2, code = 0x0 (Null tuple), length = 0 Tuple #3, code = 0x0 (Null tuple), length = 0 2 slots found --------------D724008792CEB1440D06AB9A Content-Type: text/plain; charset=us-ascii; name="pccardd.data" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="pccardd.data" Code 14 not found Code 14 not found code Unknown ignored Code 105 not found Code 105 not found code Unknown ignored Code 48 not found Code 48 not found code Unknown ignored --------------D724008792CEB1440D06AB9A Content-Type: text/plain; charset=us-ascii; name="rdattr.data" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="rdattr.data" 0000: 0e 00 00 00 00 00 00 00 69 0b 00 30 00 00 00 00 0010: 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0090: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0110: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0120: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0130: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0140: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0150: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0170: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0190: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 --------------D724008792CEB1440D06AB9A Content-Type: text/plain; charset=us-ascii; name="rdreg.data" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="rdreg.data" Registers for slot 0 00: 84 6f 98 60 00 bf 00 00 00 00 00 00 00 00 00 00 10: 00 00 00 00 00 00 c2 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Registers for slot 1 00: 84 00 00 00 00 ff 00 00 00 00 00 00 00 00 00 00 10: 00 00 00 00 00 00 c2 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 --------------D724008792CEB1440D06AB9A-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Feb 10 7:32:39 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from mail2.svr.pol.co.uk (mail2.svr.pol.co.uk [195.92.193.210]) by builder.freebsd.org (Postfix) with ESMTP id 7C2F144A9 for ; Thu, 10 Feb 2000 07:32:30 -0800 (PST) Received: from modem-230.bicolor-dottyback.dialup.pol.co.uk ([62.136.230.230] helo=lungfish.freeserve.co.uk) by mail2.svr.pol.co.uk with esmtp (Exim 3.13 #0) id 12IvZg-0003rT-00; Thu, 10 Feb 2000 15:32:09 +0000 Received: (from scott@localhost) by lungfish.freeserve.co.uk (8.8.8/8.8.8) id WAA02242; Wed, 9 Feb 2000 22:12:28 GMT (envelope-from scott) Message-ID: <20000209221227.63920@lungfish.freeserve.co.uk> Date: Wed, 9 Feb 2000 22:12:27 +0000 From: Scott Mitchell To: Warner Losh , "Brian W. Buchanan" Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: xe0 and -current References: <200002091854.LAA35929@harmony.village.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.89i In-Reply-To: <200002091854.LAA35929@harmony.village.org>; from Warner Losh on Wed, Feb 09, 2000 at 11:54:56AM -0700 X-Operating-System: FreeBSD 2.2.6-RELEASE i386 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Wed, Feb 09, 2000 at 11:54:56AM -0700, Warner Losh wrote: > In message "Brian W. Buchanan" writes: > : I just purchased an Intel EtherExpress PRO/100 16 bit card and am > > Are you sure the EtherExpress is a Xircom related card? If so, you > are are out of luck for a while. I have one or two things to add to > pccard to make it able to support this. Yup, these cards (the 16-bit ones anyway) are functionally identical to a Xircom CE3. It should work fine on 3.x for now. Scott -- =========================================================================== Scott Mitchell | PGP Key ID | "Eagles may soar, but weasels Cambridge, England | 0x54B171B9 | don't get sucked into jet engines" s.mitchell@computer.org | 0xAA775B8B | -- Anon To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Feb 10 7:36:19 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from frmug.org (frmug-gw.frmug.org [193.56.58.252]) by builder.freebsd.org (Postfix) with ESMTP id 4AA7D44A7 for ; Thu, 10 Feb 2000 07:36:10 -0800 (PST) Received: (from uucp@localhost) by frmug.org (8.9.3/frmug-2.5/nospam) with UUCP id QAA11030 for freebsd-mobile@FreeBSD.org; Thu, 10 Feb 2000 16:35:43 +0100 (CET) (envelope-from roberto@keltia.freenix.fr) Received: by keltia.freenix.fr (Postfix, from userid 101) id E77988877; Thu, 10 Feb 2000 08:06:50 +0100 (CET) Date: Thu, 10 Feb 2000 08:06:50 +0100 From: Ollivier Robert To: FreeBSD mobile Mailing List Subject: Re: Installing on laptops, a question Message-ID: <20000210080650.A26008@keltia.freenix.fr> Mail-Followup-To: FreeBSD mobile Mailing List References: <200002100334.UAA38770@harmony.village.org> <20000210152614.F67060@freebie.lemis.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0i In-Reply-To: <20000210152614.F67060@freebie.lemis.com>; from grog@lemis.com on Thu, Feb 10, 2000 at 03:26:14PM +1030 X-Operating-System: FreeBSD 4.0-CURRENT/ELF AMD-K6/200 & 2x PPro/200 SMP Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org [ forcing irq usage in sysinstall for pccard ] According to Greg Lehey: > No, sounds like a good idea to me. Agreed, I got bitten by that as well. -- Ollivier ROBERT -=- FreeBSD: The Power to Serve! -=- roberto@keltia.freenix.fr FreeBSD keltia.freenix.fr 4.0-CURRENT #77: Thu Dec 30 12:49:51 CET 1999 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Feb 10 10:27:35 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from alpo.whistle.com (alpo.whistle.com [207.76.204.38]) by builder.freebsd.org (Postfix) with ESMTP id 8CD66454B for ; Thu, 10 Feb 2000 10:27:24 -0800 (PST) Received: from whistle.com (crab.whistle.com [207.76.205.112]) by alpo.whistle.com (8.9.1a/8.9.1) with ESMTP id KAA16376; Thu, 10 Feb 2000 10:27:01 -0800 (PST) Received: (from ambrisko@localhost) by whistle.com (8.9.3/8.9.1) id KAA90609; Thu, 10 Feb 2000 10:27:08 -0800 (PST) (envelope-from ambrisko) From: Doug Ambrisko Message-Id: <200002101827.KAA90609@whistle.com> Subject: Update to pccard ata changes (removal support) To: imp@village.org, freebsd-mobile@freebsd.org Date: Thu, 10 Feb 2000 10:27:07 -0800 (PST) X-Mailer: ELM [version 2.4ME+ PL61 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I have now added removal support to the ata driver for pccard. Caveats, the devices increment each time they are inserted and removed. Also I do not checks for mounted devices etc. yet. I'm not sure what the details are to deal with this (since as the card is being ripped out there won't be time to sync the device). So your machine might panic. I don't know and haven't tested this. I also need to look at the incrementing device issue. I thought it would be usefull to get this code out before I start to investigate that. I have tested it with my external hard disk, CD-Rom and Zip. They all seemed to handle it fine. Device accesses to old device names failed somewhat gracefully (ie. no panic but some error messages). Please let me know how it works. Again this is relative to -current. Doug A. Index: ata-all.c =================================================================== RCS file: /cvs/freebsd/src/sys/dev/ata/ata-all.c,v retrieving revision 1.47 diff -c -r1.47 ata-all.c *** ata-all.c 2000/02/04 10:20:20 1.47 --- ata-all.c 2000/02/10 18:17:34 *************** *** 30,35 **** --- 30,36 ---- #include "ata.h" #include "apm.h" + #include "card.h" #include "isa.h" #include "pci.h" #include "atadisk.h" *************** *** 88,93 **** --- 89,103 ---- static void btrim(int8_t *, int32_t); static void bpack(int8_t *, int8_t *, int32_t); + #if NCARD > 0 + static int ata_pccard_attach __P((device_t dev)); + static int ata_pccard_detach __P((device_t dev)); + static int ata_pccard_probe __P((device_t dev)); + /* XXX */ + extern void ad_drvinit(void); + extern void atapi_init(void); + #endif /* NCARD > 0 */ + /* local vars */ static int32_t atanlun = 2; static struct intr_config_hook *ata_attach_hook = NULL; *************** *** 187,192 **** --- 197,354 ---- DRIVER_MODULE(ata, isa, ata_isa_driver, ata_devclass, 0, 0); #endif + #if NCARD > 0 + static int + ata_pccard_probe(dev) + device_t dev; + { + struct resource *port; + int rid; + int32_t res; + int32_t lun; + static struct intr_config_hook *tmp; + + /* Allocate the port range */ + rid = 0; + port = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 0, ~0, 16, RF_ACTIVE); + /* XXX 16 shouldn't be hard coded */ + + if (!port) + return (ENOMEM); + + /* don't worry about conflict since PCCard code should have checked + already */ + /* + * XXX ALTPORT not used in pccard XXX + * Here's the i/o map for isa vs pccard + * Offset isa pccard + * DATA 0 0 + * ERROR 1 1 R + * FEATURE 1 1 W + * COUNT 2 2 W + * IREASON 2 2 R + * SECTOR 3 3 + * CYL_LSB 4 4 + * CYL_MSB 5 5 + * DRIVE 6 6 + * CMD 7 7 + * STATUS 7 7 + * ALTSTATUS 206 8 R + * CTLR 206 8 W + * wd_digin 207 9 + */ + + /* trick ata_probe to not queue up interrupts since interupts + are active now */ + tmp=ata_attach_hook; + ata_attach_hook = 1; + + res = ata_probe(rman_get_start(port), + rman_get_start(port) + ATA_ALTPORT_ONE_WINDOW, 0, dev, &lun); + + /* restore hook */ + ata_attach_hook = tmp; + + bus_release_resource(dev, SYS_RES_IOPORT, rid, port); + + if (res) { + isa_set_portsize(dev, res); + *(int *)device_get_softc(dev) = lun; + atadevices[lun]->flags |= ATA_USE_16BIT; + return 0; + } + return ENXIO; + } + + static int + ata_pccard_attach(dev) + device_t dev; + { + struct ata_softc *sc = atadevices[*(int *)device_get_softc(dev)]; + int status; + + /* Allocate the port range and interrupt */ + sc->port_res = bus_alloc_resource(dev, SYS_RES_IOPORT, &sc->port_rid, + 0, ~0, 1, RF_ACTIVE); + if (!sc->port_res) { + /* XXX Need to free things ? */ + return (ENOMEM); + } + + sc->irq_res = bus_alloc_resource(dev, SYS_RES_IRQ, &sc->irq_rid, + 0, ~0, 1, RF_ACTIVE); + if (!sc->irq_res) { + /* XXX Need to free things ? */ + bus_release_resource(dev, SYS_RES_IOPORT, sc->port_rid, sc->port_res); + return (ENOMEM); + } + status = bus_setup_intr(dev, sc->irq_res, INTR_TYPE_BIO, ataintr, + atadevices[*(int *)device_get_softc(dev)], + &sc->irq_handle); + + /* XXX The following really should just scan *THIS* device XXX */ + /* XXX Also, we need to do more than just ad XXX */ + + if (status == 0) { + ata_attach(dev); + } + return status; + } + + + static int + ata_pccard_detach(dev) + device_t dev; + { + struct ata_softc *sc = atadevices[*(int *)device_get_softc(dev)]; + + if (sc->gone) { + device_printf(dev,"already unloaded\n"); + return(0); + } + + sc->gone = 1; + + bus_teardown_intr(dev, sc->irq_res, sc->irq_handle); + + if (sc->port_res) { + bus_release_resource(dev, SYS_RES_IOPORT, + sc->port_rid, sc->port_res); + sc->port_res = 0; + } + if (sc->irq_res) { + bus_release_resource(dev, SYS_RES_IRQ, + sc->irq_rid, sc->irq_res); + sc->irq_res = 0; + } + + atadevices[*(int *)device_get_softc(dev)]=NULL; + + free(sc, M_DEVBUF); + + device_printf(dev,"unloaded\n"); + return (0); + } + + + static device_method_t ata_pccard_methods[] = { + /* Device interface */ + DEVMETHOD(device_probe, ata_pccard_probe), + DEVMETHOD(device_attach, ata_pccard_attach), + DEVMETHOD(device_detach, ata_pccard_detach), + + { 0, 0 } + }; + + static driver_t ata_pccard_driver = { + "ata", + ata_pccard_methods, + sizeof(int), + }; + + DRIVER_MODULE(ata, pccard, ata_pccard_driver, ata_devclass, 0, 0); + #endif (NCARD > 0) + #if NPCI > 0 static const char * ata_pcimatch(device_t dev) *************** *** 655,661 **** * of non-exsistent devices and thereby long delays */ for (ctlr=0; ctlrdevices & ATA_ATA_SLAVE) if (ata_getparam(atadevices[ctlr], ATA_SLAVE, ATA_C_ATA_IDENTIFY)) atadevices[ctlr]->devices &= ~ATA_ATA_SLAVE; --- 817,824 ---- * of non-exsistent devices and thereby long delays */ for (ctlr=0; ctlrdevices & ATA_PROBED)) continue; if (atadevices[ctlr]->devices & ATA_ATA_SLAVE) if (ata_getparam(atadevices[ctlr], ATA_SLAVE, ATA_C_ATA_IDENTIFY)) atadevices[ctlr]->devices &= ~ATA_ATA_SLAVE; *************** *** 673,679 **** #if NATADISK > 0 /* now we know whats there, do the real attach, first the ATA disks */ for (ctlr=0; ctlrdevices & ATA_ATA_MASTER) ad_attach(atadevices[ctlr], ATA_MASTER); if (atadevices[ctlr]->devices & ATA_ATA_SLAVE) --- 836,843 ---- #if NATADISK > 0 /* now we know whats there, do the real attach, first the ATA disks */ for (ctlr=0; ctlrdevices & ATA_PROBED)) continue; if (atadevices[ctlr]->devices & ATA_ATA_MASTER) ad_attach(atadevices[ctlr], ATA_MASTER); if (atadevices[ctlr]->devices & ATA_ATA_SLAVE) *************** *** 683,695 **** #if NATAPICD > 0 || NATAPIFD > 0 || NATAPIST > 0 /* then the atapi devices */ for (ctlr=0; ctlrdevices & ATA_ATAPI_MASTER) atapi_attach(atadevices[ctlr], ATA_MASTER); if (atadevices[ctlr]->devices & ATA_ATAPI_SLAVE) atapi_attach(atadevices[ctlr], ATA_SLAVE); } #endif if (ata_attach_hook) { config_intrhook_disestablish(ata_attach_hook); free(ata_attach_hook, M_ATA); --- 847,865 ---- #if NATAPICD > 0 || NATAPIFD > 0 || NATAPIST > 0 /* then the atapi devices */ for (ctlr=0; ctlrdevices & ATA_PROBED)) continue; if (atadevices[ctlr]->devices & ATA_ATAPI_MASTER) atapi_attach(atadevices[ctlr], ATA_MASTER); if (atadevices[ctlr]->devices & ATA_ATAPI_SLAVE) atapi_attach(atadevices[ctlr], ATA_SLAVE); } #endif + /* mark all current controllers probed for devices */ + for (ctlr=0; ctlrdevices |= ATA_PROBED; + } if (ata_attach_hook) { config_intrhook_disestablish(ata_attach_hook); free(ata_attach_hook, M_ATA); Index: ata-all.h =================================================================== RCS file: /cvs/freebsd/src/sys/dev/ata/ata-all.h,v retrieving revision 1.23 diff -c -r1.23 ata-all.h *** ata-all.h 2000/01/28 13:35:42 1.23 --- ata-all.h 2000/02/10 18:17:34 *************** *** 87,92 **** --- 87,93 ---- #define ATA_S_BUSY 0x80 /* busy */ #define ATA_ALTPORT 0x206 /* alternate Status register */ + #define ATA_ALTPORT_ONE_WINDOW 0x08 /* Alternate port for pccard */ #define ATA_A_IDS 0x02 /* disable interrupts */ #define ATA_A_RESET 0x04 /* RESET controller */ #define ATA_A_4BIT 0x08 /* 4 head bits */ *************** *** 281,286 **** --- 282,288 ---- #define ATA_ATA_SLAVE 0x02 #define ATA_ATAPI_MASTER 0x04 #define ATA_ATAPI_SLAVE 0x08 + #define ATA_PROBED 0x10 u_int8_t status; /* last controller status */ u_int8_t error; /* last controller error */ *************** *** 300,306 **** #if NAPM > 0 struct apmhook resume_hook; /* hook for apm */ #endif ! }; /* array to hold all ata softc's */ --- 302,313 ---- #if NAPM > 0 struct apmhook resume_hook; /* hook for apm */ #endif ! int port_rid; /* resource id for port range */ ! struct resource* port_res; /* resource for port range */ ! int irq_rid; /* resource id for irq */ ! struct resource* irq_res; /* resource for irq */ ! void* irq_handle; /* handle for irq handler */ ! int gone; }; /* array to hold all ata softc's */ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Feb 10 10:40:46 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from freebsd.dk (freebsd.dk [212.242.42.178]) by builder.freebsd.org (Postfix) with ESMTP id 70B454686 for ; Thu, 10 Feb 2000 10:40:37 -0800 (PST) Received: (from sos@localhost) by freebsd.dk (8.9.3/8.9.1) id TAA39117; Thu, 10 Feb 2000 19:40:04 +0100 (CET) (envelope-from sos) From: Soren Schmidt Message-Id: <200002101840.TAA39117@freebsd.dk> Subject: Re: Update to pccard ata changes (removal support) In-Reply-To: <200002101827.KAA90609@whistle.com> from Doug Ambrisko at "Feb 10, 2000 10:27:07 am" To: ambrisko@whistle.com (Doug Ambrisko) Date: Thu, 10 Feb 2000 19:40:04 +0100 (CET) Cc: imp@village.org, freebsd-mobile@FreeBSD.ORG X-Mailer: ELM [version 2.4ME+ PL54 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org It seems Doug Ambrisko wrote: > I have now added removal support to the ata driver for pccard. > > Caveats, the devices increment each time they are inserted and removed. > Also I do not checks for mounted devices etc. yet. I'm not sure what > the details are to deal with this (since as the card is being ripped out > there won't be time to sync the device). So your machine might panic. > I don't know and haven't tested this. I also need to look at the > incrementing device issue. I thought it would be usefull to get this > code out before I start to investigate that. > > I have tested it with my external hard disk, CD-Rom and Zip. They > all seemed to handle it fine. Device accesses to old device names > failed somewhat gracefully (ie. no panic but some error messages). > > Please let me know how it works. Again this is relative to -current. ARGH! this will loose memory allocated in the subdrivers, also inc'ing the device # are a no go, you will run out of softc's... I have thought about this, and when I get a spare hour I'll implement it... However find below my version of your previous patch set, please let me know how it works (I have no way of testing it here)... There are a few other cosmetic changes in there, this is part of the next update, and not all was easily pulled out... Index: ata-all.c =================================================================== RCS file: /home/ncvs/src/sys/dev/ata/ata-all.c,v retrieving revision 1.47 diff -u -r1.47 ata-all.c --- ata-all.c 2000/02/04 10:20:20 1.47 +++ ata-all.c 2000/02/10 16:01:40 @@ -31,6 +31,7 @@ #include "ata.h" #include "apm.h" #include "isa.h" +#include "card.h" #include "pci.h" #include "atadisk.h" #include "atapicd.h" @@ -105,12 +106,11 @@ }; static int -ata_isaprobe(device_t dev) +ata_isa_probe(device_t dev) { struct resource *port; int rid; - int32_t ctlr, res; - int32_t lun; + int32_t ctlr, res, lun; /* Check isapnp ids */ if (ISA_PNP_PROBE(device_get_parent(dev), dev, ata_ids) == ENXIO) @@ -125,13 +125,10 @@ /* check if allready in use by a PCI device */ for (ctlr = 0; ctlr < atanlun; ctlr++) { if (atadevices[ctlr] && atadevices[ctlr]->ioaddr==rman_get_start(port)){ - printf("ata-isa%d: already registered as ata%d\n", - device_get_unit(dev), ctlr); bus_release_resource(dev, SYS_RES_IOPORT, 0, port); return ENXIO; } } - lun = 0; res = ata_probe(rman_get_start(port), rman_get_start(port) + ATA_ALTPORT, 0, dev, &lun); @@ -148,7 +145,7 @@ } static int -ata_isaattach(device_t dev) +ata_isa_attach(device_t dev) { struct resource *port; struct resource *irq; @@ -173,8 +170,8 @@ static device_method_t ata_isa_methods[] = { /* Device interface */ - DEVMETHOD(device_probe, ata_isaprobe), - DEVMETHOD(device_attach, ata_isaattach), + DEVMETHOD(device_probe, ata_isa_probe), + DEVMETHOD(device_attach, ata_isa_attach), { 0, 0 } }; @@ -187,6 +184,88 @@ DRIVER_MODULE(ata, isa, ata_isa_driver, ata_devclass, 0, 0); #endif +#if NCARD > 0 +static int +ata_pccard_probe(device_t dev) +{ + struct resource *port; + int rid; + int32_t res, lun; + + /* Allocate the port range */ + rid = 0; + port = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 0, ~0, 16, RF_ACTIVE); + if (!port) + return (ENOMEM); + + /* dont have ata_probe() hook into the intr_config chain */ + if (!ata_attach_hook) + ata_attach_hook = (struct intr_config_hook *)-1; + + lun = 0; + res = ata_probe(rman_get_start(port), + rman_get_start(port) + ATA_ALTPORT_PCCARD, 0, dev, &lun); + + if (ata_attach_hook == (struct intr_config_hook *)-1) + ata_attach_hook = NULL; + + bus_release_resource(dev, SYS_RES_IOPORT, rid, port); + + if (res) { + isa_set_portsize(dev, res); + *(int *)device_get_softc(dev) = lun; + atadevices[lun]->flags |= ATA_USE_16BIT; + return 0; + } + return ENXIO; +} + +static int +ata_pccard_attach(device_t dev) +{ + struct resource *port; + struct resource *irq; + void *ih; + int rid; + int status; + + /* Allocate the port range and interrupt */ + rid = 0; + port = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 0, ~0, 1, RF_ACTIVE); + if (!port) { + return (ENOMEM); + } + + rid = 0; + irq = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0, ~0, 1, RF_ACTIVE); + if (!irq) { + bus_release_resource(dev, SYS_RES_IOPORT, 0, port); + return (ENOMEM); + } + status = bus_setup_intr(dev, irq, INTR_TYPE_BIO, ataintr, + atadevices[*(int *)device_get_softc(dev)], &ih); + if (status) + return status; + ata_attach(dev); + return 0; +} + +static device_method_t ata_pccard_methods[] = { + /* Device interface */ + DEVMETHOD(device_probe, ata_pccard_probe), + DEVMETHOD(device_attach, ata_pccard_attach), + { 0, 0 } +}; + +static driver_t ata_pccard_driver = { + "ata", + ata_pccard_methods, + sizeof(int), +}; + +DRIVER_MODULE(ata, pccard, ata_pccard_driver, ata_devclass, 0, 0); +#endif (NCARD > 0) + #if NPCI > 0 static const char * ata_pcimatch(device_t dev) @@ -261,7 +342,7 @@ } static int -ata_pciprobe(device_t dev) +ata_pci_probe(device_t dev) { const char *desc = ata_pcimatch(dev); @@ -274,7 +355,7 @@ } static int -ata_pciattach(device_t dev) +ata_pci_attach(device_t dev) { int unit = device_get_unit(dev); struct ata_softc *scp; @@ -489,8 +570,8 @@ static device_method_t ata_pci_methods[] = { /* Device interface */ - DEVMETHOD(device_probe, ata_pciprobe), - DEVMETHOD(device_attach, ata_pciattach), + DEVMETHOD(device_probe, ata_pci_probe), + DEVMETHOD(device_attach, ata_pci_attach), { 0, 0 } }; @@ -629,6 +710,7 @@ bzero(ata_attach_hook, sizeof(struct intr_config_hook)); ata_attach_hook->ich_func = ata_attach; + ata_attach_hook->ich_arg = NULL; if (config_intrhook_establish(ata_attach_hook) != 0) { ata_printf(scp, -1, "config_intrhook_establish failed\n"); free(ata_attach_hook, M_TEMP); @@ -645,17 +727,19 @@ } void -ata_attach(void *dummy) +ata_attach(void *dev) { int32_t ctlr; /* * run through atadevices[] and look for real ATA & ATAPI devices * using the hints we found in the early probe to avoid probing - * of non-exsistent devices and thereby long delays + * of non-exsistent devices and thereby long delays. + * if dev is !NULL only try that device. */ for (ctlr=0; ctlrdevices & ATA_ATA_SLAVE) if (ata_getparam(atadevices[ctlr], ATA_SLAVE, ATA_C_ATA_IDENTIFY)) atadevices[ctlr]->devices &= ~ATA_ATA_SLAVE; @@ -673,7 +757,8 @@ #if NATADISK > 0 /* now we know whats there, do the real attach, first the ATA disks */ for (ctlr=0; ctlrdevices & ATA_ATA_MASTER) ad_attach(atadevices[ctlr], ATA_MASTER); if (atadevices[ctlr]->devices & ATA_ATA_SLAVE) @@ -683,7 +768,8 @@ #if NATAPICD > 0 || NATAPIFD > 0 || NATAPIST > 0 /* then the atapi devices */ for (ctlr=0; ctlrdevices & ATA_ATAPI_MASTER) atapi_attach(atadevices[ctlr], ATA_MASTER); if (atadevices[ctlr]->devices & ATA_ATAPI_SLAVE) Index: ata-all.h =================================================================== RCS file: /home/ncvs/src/sys/dev/ata/ata-all.h,v retrieving revision 1.23 diff -u -r1.23 ata-all.h --- ata-all.h 2000/01/28 13:35:42 1.23 +++ ata-all.h 2000/02/10 09:33:59 @@ -86,7 +86,8 @@ #define ATA_S_READY 0x40 /* drive ready */ #define ATA_S_BUSY 0x80 /* busy */ -#define ATA_ALTPORT 0x206 /* alternate Status register */ +#define ATA_ALTPORT 0x206 /* alternate status register */ +#define ATA_ALTPORT_PCCARD 0x8 /* for PCCARD its different */ #define ATA_A_IDS 0x02 /* disable interrupts */ #define ATA_A_RESET 0x04 /* RESET controller */ #define ATA_A_4BIT 0x08 /* 4 head bits */ @@ -99,7 +100,6 @@ #define ATA_OP_CONTINUES 0x01 #define ATA_DEV(unit) ((unit == ATA_MASTER) ? 0 : 1) #define ATA_PARAM(scp, unit) scp->dev_param[ATA_DEV(unit)] - /* busmaster DMA related defines */ #define ATA_BM_OFFSET1 0x08 -Søren To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Feb 10 11:12:24 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from alpo.whistle.com (alpo.whistle.com [207.76.204.38]) by builder.freebsd.org (Postfix) with ESMTP id 69E8E44E2 for ; Thu, 10 Feb 2000 11:12:21 -0800 (PST) Received: from whistle.com (crab.whistle.com [207.76.205.112]) by alpo.whistle.com (8.9.1a/8.9.1) with ESMTP id LAA17779; Thu, 10 Feb 2000 11:12:01 -0800 (PST) Received: (from ambrisko@localhost) by whistle.com (8.9.3/8.9.1) id LAA91194; Thu, 10 Feb 2000 11:11:38 -0800 (PST) (envelope-from ambrisko) From: Doug Ambrisko Message-Id: <200002101911.LAA91194@whistle.com> Subject: Re: Update to pccard ata changes (removal support) In-Reply-To: <200002101840.TAA39117@freebsd.dk> from Soren Schmidt at "Feb 10, 2000 07:40:04 pm" To: Soren Schmidt Date: Thu, 10 Feb 2000 11:11:38 -0800 (PST) Cc: imp@village.org, freebsd-mobile@FreeBSD.ORG X-Mailer: ELM [version 2.4ME+ PL61 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Soren Schmidt writes: [Charset ISO-8859-1 unsupported, filtering to ASCII...] | It seems Doug Ambrisko wrote: | > Caveats, the devices increment each time they are inserted and removed. | > Also I do not checks for mounted devices etc. yet. I'm not sure what | > the details are to deal with this (since as the card is being ripped out | > there won't be time to sync the device). So your machine might panic. | > I don't know and haven't tested this. I also need to look at the | > incrementing device issue. I thought it would be usefull to get this | > code out before I start to investigate that. | | ARGH! this will loose memory allocated in the subdrivers, also inc'ing | the device # are a no go, you will run out of softc's... | I have thought about this, and when I get a spare hour I'll implement | it... I agree but it atleast it has code for the controller to come and go and that part worked. A few people have asked for this feature so I thought I'd try it and get comments/help. So with this you don't have to reboot after swapping cards around. The major change was the newbus resources & id's need to be saved so it could be unregistered from newbus on detach. Also another problem is probably the incrementing lun's for the the controller. It should scan for the first available one in the ata_devices array after (0 or 1 since they seems to be special). | However find below my version of your previous patch set, please let | me know how it works (I have no way of testing it here)... | There are a few other cosmetic changes in there, this is part of | the next update, and not all was easily pulled out... I tested with my external CD-Rom & hard disk (with and with an internal IDE drive attached) and it worked fine. To save you time I could add the controller removal part to your patches so you have working code for that part? Thanks for looking at it, Doug A. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Feb 10 11:33:10 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from freebsd.dk (freebsd.dk [212.242.42.178]) by builder.freebsd.org (Postfix) with ESMTP id 332D4450A for ; Thu, 10 Feb 2000 11:33:05 -0800 (PST) Received: (from sos@localhost) by freebsd.dk (8.9.3/8.9.1) id UAA39333; Thu, 10 Feb 2000 20:30:06 +0100 (CET) (envelope-from sos) From: Soren Schmidt Message-Id: <200002101930.UAA39333@freebsd.dk> Subject: Re: Update to pccard ata changes (removal support) In-Reply-To: <200002101911.LAA91194@whistle.com> from Doug Ambrisko at "Feb 10, 2000 11:11:38 am" To: ambrisko@whistle.com (Doug Ambrisko) Date: Thu, 10 Feb 2000 20:30:06 +0100 (CET) Cc: imp@village.org, freebsd-mobile@FreeBSD.ORG X-Mailer: ELM [version 2.4ME+ PL54 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org It seems Doug Ambrisko wrote: > I agree but it atleast it has code for the controller to come and > go and that part worked. A few people have asked for this feature so > I thought I'd try it and get comments/help. So with this you don't > have to reboot after swapping cards around. The major change was the > newbus resources & id's need to be saved so it could be unregistered > from newbus on detach. > > Also another problem is probably the incrementing lun's for the the > controller. It should scan for the first available one in the > ata_devices array after (0 or 1 since they seems to be special). Well, I'll take a stap at it as soon as I get the time... > | However find below my version of your previous patch set, please let > | me know how it works (I have no way of testing it here)... > | There are a few other cosmetic changes in there, this is part of > | the next update, and not all was easily pulled out... > > I tested with my external CD-Rom & hard disk (with and with an internal > IDE drive attached) and it worked fine. To save you time I could add the > controller removal part to your patches so you have working code for that > part? I already have the framework in there, so no need. > Thanks for looking at it, You're welcome, as soon as I get the other items that I have pending tests on done, I'll commit this too. The detach stuff will have to wait until I get time to implement it proberly in the subdrivers, if all goes well I might have a version for you over the weekend... -Søren To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Feb 10 15:59:16 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from nothing-going-on.demon.co.uk (nothing-going-on.demon.co.uk [193.237.89.66]) by builder.freebsd.org (Postfix) with ESMTP id D56064530 for ; Thu, 10 Feb 2000 15:59:07 -0800 (PST) Received: from kilt.nothing-going-on.org (kilt.nothing-going-on.org [192.168.1.18]) by nothing-going-on.demon.co.uk (8.9.3/8.9.3) with ESMTP id WAA92287 for ; Thu, 10 Feb 2000 22:48:01 GMT (envelope-from nik@catkin.nothing-going-on.org) Received: (from nik@localhost) by kilt.nothing-going-on.org (8.9.3/8.9.3) id VAA57219 for mobile@freebsd.org; Thu, 10 Feb 2000 21:38:25 GMT (envelope-from nik@catkin.nothing-going-on.org) Date: Thu, 10 Feb 2000 21:38:25 +0000 From: Nik Clayton To: mobile@freebsd.org Subject: Mobile FreeBSD Message-ID: <20000210213824.A45875@kilt.nothing-going-on.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.4i Organization: FreeBSD Project Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org How do folks, I've got a laptop running FreeBSD with no problems (I can hear the crys of envy from the crowd now). I'm kicking around a few ideas as to how to most effectively use a Unix mobile computer, and would welcome any input from everyone else. In my ideal world, I've got a server, holding home directories, mail store, common applications, and so on. Then there are several client machines sharing files with NFS, possibly using NIS, and so on. For preference, I'd like to be able to pull the laptop off this network for periods of time, and have things just work. Specifically, this means applications that would normally be shared, home directories still available, mail store active, and so on. Some of this is do-able. For example, making the laptop a slave NIS server should keep NIS working while it's disconnected. The tricky bit, as far as I can see, is going to be the file sharing. In particular, when the laptop is plugged back in to the network, any changes made to shared files while the laptop was away (regardless of whether those changes were made on the laptop or on the network) should be integrated. At the moment, I'm kludging my way round this with a script that I run before the laptop is removed, and after it returns. This script just rsyncs some necessary directories (home directories, that sort of thing), and sends any mail that's been written on the road and queued on the laptop, and so on. This works, but it's a bit of a hack, and it also means that there's a delay between getting the laptop back to the network, and being able to do any useful work with it (an rsync of something like the CVS tree can take 15 minutes, even over an uncongested 100Mb network). Things like CVSup don't really help that much, as the CVS tree is only a small part of the data that's transferred, and CVSup falls back to the rsync algorithm on non-CVS files anyway). From what I've read, Coda might be able to help in this sort of situation, but it looks like quite a large sledgehammer for this particular nut, and I believe it's really going to require keeping track of -current to be effective -- if I can avoid that, I'd like to, as I don't really have the resources to effectively track -current. For the time being, I don't think there's really an effective solution to this sort of problem. But I'd be interested in other people's perspectives on the problem. N -- If you want to imagine the future, imagine a tennis shoe stamping on a penguin's face forever. --- with apologies to George Orwell To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Feb 10 20:54:57 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from rover.village.org (rover.village.org [204.144.255.49]) by builder.freebsd.org (Postfix) with ESMTP id 2B98C4664 for ; Thu, 10 Feb 2000 20:54:54 -0800 (PST) Received: from harmony.village.org (harmony.village.org [10.0.0.6]) by rover.village.org (8.9.3/8.9.3) with ESMTP id VAA48763; Thu, 10 Feb 2000 21:54:38 -0700 (MST) (envelope-from imp@harmony.village.org) Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id VAA47045; Thu, 10 Feb 2000 21:55:42 -0700 (MST) Message-Id: <200002110455.VAA47045@harmony.village.org> To: "Don L. Belcher" Subject: Re: Cardbus Attribute memory access problem? Cc: freebsd-mobile@FreeBSD.ORG In-reply-to: Your message of "Thu, 10 Feb 2000 05:38:45 GMT." <38A24EE5.6CD2C2C5@siad.net> References: <38A24EE5.6CD2C2C5@siad.net> Date: Thu, 10 Feb 2000 21:55:42 -0700 From: Warner Losh Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In message <38A24EE5.6CD2C2C5@siad.net> "Don L. Belcher" writes: : I would like to have FreeBSD working on my portable and have network : card working. My computer is a EPS Technologies APEX 233 mhz, I : don't seem to be reading Attribute memory correctly (maybe not : enabled for some reason). I'm sending 6 files as attachmets with : information. If you need any more information or this is the wrong : email address to ask for help let me know. Cardbus isn't supported. They are 3.3V devices, and FreeBSD also doesn't support 3.3v devices.... Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Feb 10 21:51:47 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from grey.cloud.rain.com (c1029014-a.bvrtn1.or.home.com [24.12.160.67]) by builder.freebsd.org (Postfix) with ESMTP id AE68F4688 for ; Thu, 10 Feb 2000 21:51:44 -0800 (PST) Received: (qmail 8735 invoked from network); 11 Feb 2000 05:46:31 -0000 Received: from localhost.cloud.rain.com (HELO cloud.rain.com) (@127.0.0.1) by localhost.cloud.rain.com with SMTP; 11 Feb 2000 05:46:31 -0000 To: Nik Clayton Cc: mobile@freebsd.org Subject: Re: Mobile FreeBSD References: <20000210213824.A45875@kilt.nothing-going-on.org> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-ID: <8731.950247991.1@cloud.rain.com> Date: Thu, 10 Feb 2000 21:46:31 -0800 Message-ID: <8732.950247991@cloud.rain.com> From: Bill Trost Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Nik Clayton writes: For preference, I'd like to be able to pull the laptop off this network for periods of time, and have things just work... The tricky bit, as far as I can see, is going to be the file sharing. In particular, when the laptop is plugged back in to the network, any changes made to shared files while the laptop was away (regardless of whether those changes were made on the laptop or on the network) should be integrated. That sounds like the coda filesystem, which is included as part of the distribution (there is also a reference at www.freebsd.org/projects). As I understand it, it requires a machine dedicated to being the coda server, and it has this itsy 100 MB cache on the clients, but it might meet your needs. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Feb 10 21:52:37 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from grey.cloud.rain.com (c1029014-a.bvrtn1.or.home.com [24.12.160.67]) by builder.freebsd.org (Postfix) with ESMTP id 5B9F44637 for ; Thu, 10 Feb 2000 21:52:35 -0800 (PST) Received: (qmail 8766 invoked from network); 11 Feb 2000 05:48:00 -0000 Received: from localhost.cloud.rain.com (HELO cloud.rain.com) (@127.0.0.1) by localhost.cloud.rain.com with SMTP; 11 Feb 2000 05:48:00 -0000 To: mobile@freebsd.org Subject: my previous message MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-ID: <8762.950248080.1@cloud.rain.com> Date: Thu, 10 Feb 2000 21:48:00 -0800 Message-ID: <8763.950248080@cloud.rain.com> From: Bill Trost Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I apologize for my reply to Nik Clayton's message. I didn't bother to finish reading the message before dashing off a reply, and obviously I didn't say anything he didn't already know. Sorry. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Feb 10 22:41: 9 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from rover.village.org (rover.village.org [204.144.255.49]) by builder.freebsd.org (Postfix) with ESMTP id 54AE745D7 for ; Thu, 10 Feb 2000 22:41:05 -0800 (PST) Received: from harmony.village.org (harmony.village.org [10.0.0.6]) by rover.village.org (8.9.3/8.9.3) with ESMTP id XAA49302; Thu, 10 Feb 2000 23:40:49 -0700 (MST) (envelope-from imp@harmony.village.org) Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id XAA47947; Thu, 10 Feb 2000 23:41:55 -0700 (MST) Message-Id: <200002110641.XAA47947@harmony.village.org> To: Soren Schmidt Subject: Re: Update to pccard ata changes (removal support) Cc: ambrisko@whistle.com (Doug Ambrisko), freebsd-mobile@FreeBSD.ORG In-reply-to: Your message of "Thu, 10 Feb 2000 19:40:04 +0100." <200002101840.TAA39117@freebsd.dk> References: <200002101840.TAA39117@freebsd.dk> Date: Thu, 10 Feb 2000 23:41:55 -0700 From: Warner Losh Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In message <200002101840.TAA39117@freebsd.dk> Soren Schmidt writes: : However find below my version of your previous patch set, please let : me know how it works (I have no way of testing it here)... : There are a few other cosmetic changes in there, this is part of : the next update, and not all was easily pulled out... This patch works OK for me. My CF card works w/o a hitch. My cdrom doesn't work, my guess is some kind of powerup sequence for the cdrom is needed before it will detect: ata1: iobase=0x0170 altiobase=0x0178 bmaddr=0x0000 ata1: mask=03 status0=00 status1=00 ata1: mask=03 status0=00 status1=00 ata1: devices = 0x0 ata2: iobase=0x0240 altiobase=0x0248 bmaddr=0x0000 ata2: mask=03 status0=50 status1=00 ata2: mask=03 status0=50 status1=00 ata2: devices = 0x1 My CLIK panics my kernel: ata1 at port 0x180-0x18f irq 11 slot 0 on pccard0 ata2-master: floppy device - NO DRIVER! Fatal trap 12: page fault while in kernel mode Also, the altiobase is wrong for the cdrom. It should be the usual isa ata addresses. Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Feb 10 23:35:24 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from freebsd.dk (freebsd.dk [212.242.42.178]) by builder.freebsd.org (Postfix) with ESMTP id F2BA54615 for ; Thu, 10 Feb 2000 23:35:17 -0800 (PST) Received: (from sos@localhost) by freebsd.dk (8.9.3/8.9.1) id IAA41570; Fri, 11 Feb 2000 08:34:51 +0100 (CET) (envelope-from sos) From: Soren Schmidt Message-Id: <200002110734.IAA41570@freebsd.dk> Subject: Re: Update to pccard ata changes (removal support) In-Reply-To: <200002110641.XAA47947@harmony.village.org> from Warner Losh at "Feb 10, 2000 11:41:55 pm" To: imp@village.org (Warner Losh) Date: Fri, 11 Feb 2000 08:34:51 +0100 (CET) Cc: ambrisko@whistle.com (Doug Ambrisko), freebsd-mobile@FreeBSD.ORG X-Mailer: ELM [version 2.4ME+ PL54 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org It seems Warner Losh wrote: > This patch works OK for me. My CF card works w/o a hitch. My cdrom > doesn't work, my guess is some kind of powerup sequence for the cdrom > is needed before it will detect: How are they located the CF on ata1 and the CDROM on ata2 ?? > ata1: iobase=0x0170 altiobase=0x0178 bmaddr=0x0000 > ata1: mask=03 status0=00 status1=00 > ata1: mask=03 status0=00 status1=00 > ata1: devices = 0x0 > ata2: iobase=0x0240 altiobase=0x0248 bmaddr=0x0000 > ata2: mask=03 status0=50 status1=00 > ata2: mask=03 status0=50 status1=00 > ata2: devices = 0x1 > > My CLIK panics my kernel: > > ata1 at port 0x180-0x18f irq 11 slot 0 on pccard0 > ata2-master: floppy device - NO DRIVER! > Fatal trap 12: page fault while in kernel mode Damn I thought I fixed that panic, is this with the latest -current ?? Ouch I see it, commit comming.... > Also, the altiobase is wrong for the cdrom. It should be the usual > isa ata addresses. Uhm, if it bound via the pccard routines it can not be at the usual place, there is no way to know when it should be one or the other... -Søren To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Feb 10 23:45:37 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from rover.village.org (rover.village.org [204.144.255.49]) by builder.freebsd.org (Postfix) with ESMTP id 5B01B469B for ; Thu, 10 Feb 2000 23:45:30 -0800 (PST) Received: from harmony.village.org (harmony.village.org [10.0.0.6]) by rover.village.org (8.9.3/8.9.3) with ESMTP id AAA49450; Fri, 11 Feb 2000 00:45:03 -0700 (MST) (envelope-from imp@harmony.village.org) Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id AAA48200; Fri, 11 Feb 2000 00:46:09 -0700 (MST) Message-Id: <200002110746.AAA48200@harmony.village.org> To: Soren Schmidt Subject: Re: Update to pccard ata changes (removal support) Cc: ambrisko@whistle.com (Doug Ambrisko), freebsd-mobile@FreeBSD.ORG In-reply-to: Your message of "Fri, 11 Feb 2000 08:34:51 +0100." <200002110734.IAA41570@freebsd.dk> References: <200002110734.IAA41570@freebsd.dk> Date: Fri, 11 Feb 2000 00:46:09 -0700 From: Warner Losh Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In message <200002110734.IAA41570@freebsd.dk> Soren Schmidt writes: : It seems Warner Losh wrote: : > This patch works OK for me. My CF card works w/o a hitch. My cdrom : > doesn't work, my guess is some kind of powerup sequence for the cdrom : > is needed before it will detect: : : How are they located the CF on ata1 and the CDROM on ata2 ?? cdrom at ata1, eject cdrom at ata2. I then rebooted and the CF worked w/o incident (I didn't try before the reboot). Sorry I wasn't clear. : > ata1: iobase=0x0170 altiobase=0x0178 bmaddr=0x0000 : > ata1: mask=03 status0=00 status1=00 : > ata1: mask=03 status0=00 status1=00 : > ata1: devices = 0x0 : > ata2: iobase=0x0240 altiobase=0x0248 bmaddr=0x0000 : > ata2: mask=03 status0=50 status1=00 : > ata2: mask=03 status0=50 status1=00 : > ata2: devices = 0x1 : > : > My CLIK panics my kernel: : > : > ata1 at port 0x180-0x18f irq 11 slot 0 on pccard0 : > ata2-master: floppy device - NO DRIVER! : > Fatal trap 12: page fault while in kernel mode : : Damn I thought I fixed that panic, is this with the latest -current ?? : Ouch I see it, commit comming.... Yes. Here's more details, lemme know if you need more. Looks like the floppy driver needs a little work. Or it might just be the two windows problem. What's in the altstatus register? What is it used for? pccard: card inserted, slot 0 ata1 at port 0x180-0x18f irq 11 slot 0 on pccard0 (null): MODE_SENSE_BIG - ILLEGAL REQUEST asc=24 ascq=00 error=00 (null): MODE_SENSE_BIG - ILLEGAL REQUEST asc=24 ascq=00 error=00 (null): MODE_SENSE_BIG - ILLEGAL REQUEST asc=24 ascq=00 error=00 ata2-master: floppy device - NO DRIVER! Fatal trap 12: page fault while in kernel mode fault virtual address = 0x4 fault code = supervisor read, page not present instruction pointer = 0x8:0xc0221ca9 stack pointer = 0x10:0xc86b8cd4 frame pointer = 0x10:0xc86b8d04 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 50 (pccardd) interrupt mask = none : > Also, the altiobase is wrong for the cdrom. It should be the usual : > isa ata addresses. : : Uhm, if it bound via the pccard routines it can not be at the usual : place, there is no way to know when it should be one or the other... Yes. That was a comment about the pccard attachment code not being completely right. Sorry I wasn't clear. I know how to tell the difference and hope to make a small change shortly. Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Feb 10 23:53:18 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from freebsd.dk (freebsd.dk [212.242.42.178]) by builder.freebsd.org (Postfix) with ESMTP id 7F52D45C5 for ; Thu, 10 Feb 2000 23:53:10 -0800 (PST) Received: (from sos@localhost) by freebsd.dk (8.9.3/8.9.1) id IAA41633; Fri, 11 Feb 2000 08:52:44 +0100 (CET) (envelope-from sos) From: Soren Schmidt Message-Id: <200002110752.IAA41633@freebsd.dk> Subject: Re: Update to pccard ata changes (removal support) In-Reply-To: <200002110746.AAA48200@harmony.village.org> from Warner Losh at "Feb 11, 2000 00:46:09 am" To: imp@village.org (Warner Losh) Date: Fri, 11 Feb 2000 08:52:44 +0100 (CET) Cc: ambrisko@whistle.com (Doug Ambrisko), freebsd-mobile@FreeBSD.ORG X-Mailer: ELM [version 2.4ME+ PL54 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org It seems Warner Losh wrote: > > cdrom at ata1, eject cdrom at ata2. I then rebooted and the CF worked > w/o incident (I didn't try before the reboot). Sorry I wasn't clear. Ah, ok... > > Yes. Here's more details, lemme know if you need more. Looks like > the floppy driver needs a little work. Or it might just be the two > windows problem. What's in the altstatus register? What is it used > for? I just committed a fix for the panic, real braino :( still too little sleep I guess... The altio address is only used for resetting the device, nothing else. > pccard: card inserted, slot 0 > ata1 at port 0x180-0x18f irq 11 slot 0 on pccard0 > (null): MODE_SENSE_BIG - ILLEGAL REQUEST asc=24 ascq=00 error=00 > (null): MODE_SENSE_BIG - ILLEGAL REQUEST asc=24 ascq=00 error=00 > (null): MODE_SENSE_BIG - ILLEGAL REQUEST asc=24 ascq=00 error=00 URK! it doesn't like MODE_SENSE, IOmega is still not taking the ATAPI std seriously, like the ZIP, _sigh_, well the panic should now be gone, try to see how far it gets then... > : Uhm, if it bound via the pccard routines it can not be at the usual > : place, there is no way to know when it should be one or the other... > > Yes. That was a comment about the pccard attachment code not being > completely right. Sorry I wasn't clear. I know how to tell the > difference and hope to make a small change shortly. OK, let me know and I'll try to incorporate it. I'm trying to integrate some of the new stuff dfr has done, but in a different manner, that should make things easier, especially the detach stuff... -Søren To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Feb 11 0: 1: 6 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from rover.village.org (rover.village.org [204.144.255.49]) by builder.freebsd.org (Postfix) with ESMTP id C080446B6 for ; Fri, 11 Feb 2000 00:01:03 -0800 (PST) Received: from harmony.village.org (harmony.village.org [10.0.0.6]) by rover.village.org (8.9.3/8.9.3) with ESMTP id BAA49495; Fri, 11 Feb 2000 01:00:50 -0700 (MST) (envelope-from imp@harmony.village.org) Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id BAA48279; Fri, 11 Feb 2000 01:01:56 -0700 (MST) Message-Id: <200002110801.BAA48279@harmony.village.org> To: Soren Schmidt Subject: Re: Update to pccard ata changes (removal support) Cc: ambrisko@whistle.com (Doug Ambrisko), freebsd-mobile@FreeBSD.ORG In-reply-to: Your message of "Fri, 11 Feb 2000 08:52:44 +0100." <200002110752.IAA41633@freebsd.dk> References: <200002110752.IAA41633@freebsd.dk> Date: Fri, 11 Feb 2000 01:01:56 -0700 From: Warner Losh Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In message <200002110752.IAA41633@freebsd.dk> Soren Schmidt writes: : I just committed a fix for the panic, real braino :( still too little : sleep I guess... OK. I'll not try until I cvsup again. : The altio address is only used for resetting the device, nothing else. Would a device fail to properly reset w/o it? : URK! it doesn't like MODE_SENSE, IOmega is still not taking the : ATAPI std seriously, like the ZIP, _sigh_, well the panic should : now be gone, try to see how far it gets then... OK. Will do. : OK, let me know and I'll try to incorporate it. I'm trying to integrate : some of the new stuff dfr has done, but in a different manner, that : should make things easier, especially the detach stuff... Sure. The changes I have are minor to the last version you sent out. Time to reboot... Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Feb 11 0:12: 9 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from freebsd.dk (freebsd.dk [212.242.42.178]) by builder.freebsd.org (Postfix) with ESMTP id 8F14C4688 for ; Fri, 11 Feb 2000 00:12:06 -0800 (PST) Received: (from sos@localhost) by freebsd.dk (8.9.3/8.9.1) id JAA41705; Fri, 11 Feb 2000 09:11:47 +0100 (CET) (envelope-from sos) From: Soren Schmidt Message-Id: <200002110811.JAA41705@freebsd.dk> Subject: Re: Update to pccard ata changes (removal support) In-Reply-To: <200002110801.BAA48279@harmony.village.org> from Warner Losh at "Feb 11, 2000 01:01:56 am" To: imp@village.org (Warner Losh) Date: Fri, 11 Feb 2000 09:11:47 +0100 (CET) Cc: ambrisko@whistle.com (Doug Ambrisko), freebsd-mobile@FreeBSD.ORG X-Mailer: ELM [version 2.4ME+ PL54 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org It seems Warner Losh wrote: > : The altio address is only used for resetting the device, nothing else. > > Would a device fail to properly reset w/o it? Yes, you wont be able to do a reset. > : OK, let me know and I'll try to incorporate it. I'm trying to integrate > : some of the new stuff dfr has done, but in a different manner, that > : should make things easier, especially the detach stuff... > > Sure. The changes I have are minor to the last version you sent out. OK > Time to reboot... Sounds like a windows user :) -Søren To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Feb 11 0:57:27 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from rover.village.org (rover.village.org [204.144.255.49]) by builder.freebsd.org (Postfix) with ESMTP id 55E3646C3 for ; Fri, 11 Feb 2000 00:57:24 -0800 (PST) Received: from harmony.village.org (harmony.village.org [10.0.0.6]) by rover.village.org (8.9.3/8.9.3) with ESMTP id BAA49608; Fri, 11 Feb 2000 01:57:10 -0700 (MST) (envelope-from imp@harmony.village.org) Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id BAA48566; Fri, 11 Feb 2000 01:58:17 -0700 (MST) Message-Id: <200002110858.BAA48566@harmony.village.org> To: Soren Schmidt Subject: Re: Update to pccard ata changes (removal support) Cc: ambrisko@whistle.com (Doug Ambrisko), freebsd-mobile@FreeBSD.ORG In-reply-to: Your message of "Fri, 11 Feb 2000 09:11:47 +0100." <200002110811.JAA41705@freebsd.dk> References: <200002110811.JAA41705@freebsd.dk> Date: Fri, 11 Feb 2000 01:58:17 -0700 From: Warner Losh Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In message <200002110811.JAA41705@freebsd.dk> Soren Schmidt writes: : > Would a device fail to properly reset w/o it? : : Yes, you wont be able to do a reset. ok. I've made some changes, but they don't seem to make any difference with my problem child cdrom. The ata floppy panic fix patches weren't at the cvsup server, so I didn't get a chance to test that fix. It is likely better to go ahead with the patches as we have them. : Sounds like a windows user :) Bite your tongue. Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Feb 11 2:26:42 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from bluebottle.calcaphon.com (calcaphon.demon.co.uk [193.237.19.5]) by builder.freebsd.org (Postfix) with ESMTP id 675524709; Fri, 11 Feb 2000 02:26:07 -0800 (PST) Received: from henny.webweaving.org (dhcp36.calcaphon.com [10.0.1.36]) by bluebottle.calcaphon.com (8.9.3/8.9.1) with ESMTP id KAA10395; Fri, 11 Feb 2000 10:25:42 GMT (envelope-from n_hibma@calcaphon.com) Received: from localhost (localhost [127.0.0.1]) by henny.webweaving.org (8.9.3/8.9.3) with ESMTP id WAA02285; Thu, 10 Feb 2000 22:46:42 GMT (envelope-from n_hibma@calcaphon.com) Date: Thu, 10 Feb 2000 22:46:42 +0000 (GMT) From: Nick Hibma X-Sender: n_hibma@localhost Reply-To: Nick Hibma To: Warner Losh Cc: mobile@freebsd.org, scsi@freebsd.org Subject: Re: aic pccard attachment patch In-Reply-To: <200001120657.XAA12127@harmony.village.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Warner, A stupid question: did you try the detach? The detach in umass.c (new version) is exactly the same and it bombs my system, when trying to free the SIM. Nick > I've taken the CAM patches that have been floating around the nomads > list and also written a pccard attachment for the aic driver. The > patches can be found at > http://www.freebsd.org/~imp/aic-patch > > They appear to work for me, but I've not stress tested them beyond > card insertion/extraction. I'll grab a scsi device and do more > testing, but nonetheless am fairly confident that these will work > fairly well. > > You'll also need to add aic to the database of cards in > /etc/pccard.conf. > > card "Adaptec, Inc." "APA-1460 SCSI Host Adapter" > config 0x9 "aic0" ? > is what I'm using. > > Please let me know what you think.... Especially the cam parts of the > patch. > > Warner > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-mobile" in the body of the message > -- n_hibma@webweaving.org n_hibma@freebsd.org USB project http://www.etla.net/~n_hibma/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Feb 11 8:14:46 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from moek.pir.net (moek.pir.net [209.192.237.190]) by builder.freebsd.org (Postfix) with ESMTP id 2C5B64734; Fri, 11 Feb 2000 08:14:00 -0800 (PST) Received: from pir by moek.pir.net with local (Exim) id 12JIh8-0003SU-00 ; Fri, 11 Feb 2000 11:13:22 -0500 Date: Fri, 11 Feb 2000 11:13:21 -0500 From: Peter Radcliffe To: Nick Hibma Cc: Warner Losh , mobile@freebsd.org, scsi@freebsd.org Subject: Re: aic pccard attachment patch Message-ID: <20000211111321.A12769@pir.net> Mail-Followup-To: Nick Hibma , Warner Losh , mobile@freebsd.org, scsi@freebsd.org References: <200001120657.XAA12127@harmony.village.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: ; from n_hibma@calcaphon.com on Thu, Feb 10, 2000 at 10:46:42PM +0000 X-fish: < Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Nick Hibma probably said: > A stupid question: did you try the detach? The detach in umass.c (new > version) is exactly the same and it bombs my system, when trying to free > the SIM. Using 3.4-PAO with the recently included aic stuff I don't have any problems with detatch - don't know if this is exactly the same code, though. I just can't mount any scsi cdrom drives :/ Disks work fine, all the scsi kernel entries in place, the scsi cdrom device is seen but doing anything with /dev/cd0* gives me "device not configured" :/ P. > > I've taken the CAM patches that have been floating around the nomads > > list and also written a pccard attachment for the aic driver. The > > patches can be found at > > http://www.freebsd.org/~imp/aic-patch > > > > They appear to work for me, but I've not stress tested them beyond > > card insertion/extraction. I'll grab a scsi device and do more > > testing, but nonetheless am fairly confident that these will work > > fairly well. > > > > You'll also need to add aic to the database of cards in > > /etc/pccard.conf. > > > > card "Adaptec, Inc." "APA-1460 SCSI Host Adapter" > > config 0x9 "aic0" ? > > is what I'm using. > > > > Please let me know what you think.... Especially the cam parts of the > > patch. -- pir pir@pir.net pir@net.tufts.edu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Feb 11 8:25:28 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from rover.village.org (rover.village.org [204.144.255.49]) by builder.freebsd.org (Postfix) with ESMTP id 94DAB4720; Fri, 11 Feb 2000 08:25:21 -0800 (PST) Received: from harmony.village.org (harmony.village.org [10.0.0.6]) by rover.village.org (8.9.3/8.9.3) with ESMTP id JAA50712; Fri, 11 Feb 2000 09:25:03 -0700 (MST) (envelope-from imp@harmony.village.org) Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id JAA49978; Fri, 11 Feb 2000 09:26:14 -0700 (MST) Message-Id: <200002111626.JAA49978@harmony.village.org> To: Nick Hibma Subject: Re: aic pccard attachment patch Cc: mobile@freebsd.org, scsi@freebsd.org In-reply-to: Your message of "Thu, 10 Feb 2000 22:46:42 GMT." References: Date: Fri, 11 Feb 2000 09:26:14 -0700 From: Warner Losh Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In message Nick Hibma writes: : A stupid question: did you try the detach? The detach in umass.c (new : version) is exactly the same and it bombs my system, when trying to free : the SIM. Worked last time I tried it. However, it seems fragile on camcontrol rescan. Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Feb 11 8:49:20 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from Intrepid.srv.paranet.com (kirkwood.paranet.com [199.164.131.35]) by builder.freebsd.org (Postfix) with ESMTP id 4A8743D3F for ; Fri, 11 Feb 2000 08:49:06 -0800 (PST) Received: from spr96864 (dhcp-53-234.kan.paranet.com [172.16.53.234]) by Intrepid.srv.paranet.com (8.7.1/8.7.1) with SMTP id KAA15410 for ; Fri, 11 Feb 2000 10:48:51 -0600 (CST) Reply-To: From: "J. Mike Needham" To: Subject: Test- Please disregard Date: Fri, 11 Feb 2000 10:52:05 -0600 Message-ID: <000001bf74b0$54e67a00$ea3510ac@spr96864.hq.sprint.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2377.0 Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V4.72.2106.4 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org test J. Mike Needham Technical Solutions Consultant Sprint Paranet-Kansas City jmneedha@sprintparanet.com pager: 1-800-724-3508 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Feb 11 8:50:38 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from bluebottle.calcaphon.com (calcaphon.demon.co.uk [193.237.19.5]) by builder.freebsd.org (Postfix) with ESMTP id 3DEBA4790; Fri, 11 Feb 2000 08:49:55 -0800 (PST) Received: from calcaphon.com (dhcp26.calcaphon.com [10.0.1.26]) by bluebottle.calcaphon.com (8.9.3/8.9.1) with ESMTP id QAA14149; Fri, 11 Feb 2000 16:48:49 GMT (envelope-from n_hibma@calcaphon.com) Message-ID: <38A4ADF1.56F1041C@calcaphon.com> Date: Fri, 11 Feb 2000 16:48:49 -0800 From: Nick Hibma Organization: Qube X-Mailer: Mozilla 4.61 [en] (WinNT; I) X-Accept-Language: en MIME-Version: 1.0 To: Warner Losh Cc: mobile@freebsd.org, scsi@freebsd.org Subject: Re: aic pccard attachment patch References: <200002111626.JAA49978@harmony.village.org> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Right, that's what I perceived as well. Ok, that means that I haven't made a mistake somewhere. Nick Warner Losh wrote: > > In message Nick Hibma writes: > : A stupid question: did you try the detach? The detach in umass.c (new > : version) is exactly the same and it bombs my system, when trying to free > : the SIM. > > Worked last time I tried it. However, it seems fragile on camcontrol > rescan. > > Warner > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-scsi" in the body of the message -- Work: n_hibma@calcaphon.com Personal: n_hibma@webweaving.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Feb 11 8:54:43 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from rover.village.org (rover.village.org [204.144.255.49]) by builder.freebsd.org (Postfix) with ESMTP id 383A03D76; Fri, 11 Feb 2000 08:54:28 -0800 (PST) Received: from harmony.village.org (harmony.village.org [10.0.0.6]) by rover.village.org (8.9.3/8.9.3) with ESMTP id JAA50924; Fri, 11 Feb 2000 09:54:14 -0700 (MST) (envelope-from imp@harmony.village.org) Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id JAA50147; Fri, 11 Feb 2000 09:55:25 -0700 (MST) Message-Id: <200002111655.JAA50147@harmony.village.org> To: Nick Hibma Subject: Re: aic pccard attachment patch Cc: mobile@freebsd.org, scsi@freebsd.org In-reply-to: Your message of "Fri, 11 Feb 2000 16:48:49 PST." <38A4ADF1.56F1041C@calcaphon.com> References: <38A4ADF1.56F1041C@calcaphon.com> <200002111626.JAA49978@harmony.village.org> Date: Fri, 11 Feb 2000 09:55:25 -0700 From: Warner Losh Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In message <38A4ADF1.56F1041C@calcaphon.com> Nick Hibma writes: : Ok, that means that I haven't made a mistake somewhere. Yes. Justin tells me that this may be due to the devfs stuff not being able to cope with devices arriving and leaving at interrupt level. I haven't had the time to dig into it deeply... Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Feb 11 9: 6:14 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from Intrepid.srv.paranet.com (kirkwood.paranet.com [199.164.131.35]) by builder.freebsd.org (Postfix) with ESMTP id BD6D83D8A for ; Fri, 11 Feb 2000 09:06:11 -0800 (PST) Received: from spr96864 (dhcp-53-234.kan.paranet.com [172.16.53.234]) by Intrepid.srv.paranet.com (8.7.1/8.7.1) with SMTP id LAA16263 for ; Fri, 11 Feb 2000 11:06:01 -0600 (CST) Reply-To: From: "J. Mike Needham" To: "Mobile-FreeBSD (E-mail)" Subject: Installation Question on NT Date: Fri, 11 Feb 2000 11:09:16 -0600 Message-ID: <000101bf74b2$bac66c70$ea3510ac@spr96864.hq.sprint.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2377.0 Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V4.72.2106.4 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hello: I am sure this is covered in the FAQs though I couldn't find it, so I submit it to the group. I am wishing to make a mobile install of FBSD/PAO with the machine dual booting WinNT. The reason I have to do this off the bat is this is a work requirement. The NT is functioning properly and I have set up partitions for FBSD using PowerQuest Partition Magic 5.0. I will need to load everything via the NT Bootloader. The partitions are setup as follows on my 10 GB Hard Drive: 2581 MB NTFS (My existing resized WinNT partition) 2040 MB FAT16 (to be used as a common area for files between the two OS's) 4965 MB FreeSpace (Future home of FreeBSD) ____ 9586 MB Total The background information above brings me to the install question. I have downloaded FBSD 3.3 Release and PAO files that go with it. I know the installer looks for the files on c:\freebsd which is my NTFS partition, the drive letters for the two partitions being C (NTFS)and D (FAT16)respectively. Can you install FBSD from an NTFS partition or is there a way to move the install directory to the D partition and direct the installer to look for the FBSD files there? Thanks and sorry for the long winded explanation, but I felt the background information was important to alleviate the sure-to-come responses about why I would want to do this ;-) Hope someone can help. J. Mike Needham Technical Solutions Consultant Sprint Paranet-Kansas City jmneedha@sprintparanet.com pager: 1-800-724-3508 J. Mike Needham Technical Solutions Consultant Sprint Paranet-Kansas City jmneedha@sprintparanet.com pager: 1-800-724-3508 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Feb 11 9: 8:10 2000 Delivered-To: freebsd-mobile@freebsd.org Received: by builder.freebsd.org (Postfix, from userid 608) id C9FC23D46; Fri, 11 Feb 2000 09:08:08 -0800 (PST) From: "Jonathan M. Bresler" To: jmneedha@sprintparanet.com Cc: mobile@freebsd.org In-reply-to: <000001bf74b0$54e67a00$ea3510ac@spr96864.hq.sprint.com> (jmneedha@sprintparanet.com) Subject: Re: Test- Please disregard References: <000001bf74b0$54e67a00$ea3510ac@spr96864.hq.sprint.com> Message-Id: <20000211170808.C9FC23D46@builder.freebsd.org> Date: Fri, 11 Feb 2000 09:08:08 -0800 (PST) Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org dont send test messages to any list other than freebsd-test@freebsd.org. doing so can get you removed from the lists. before you send test messages to freebsd-test, you may wish to subscribe to freebsd-test. jmb > Sender: owner-freebsd-mobile@FreeBSD.ORG > X-Loop: FreeBSD.org > Precedence: bulk > > test > > J. Mike Needham To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Feb 11 9:38: 3 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from panzer.kdm.org (panzer.kdm.org [216.160.178.169]) by builder.freebsd.org (Postfix) with ESMTP id A24D53D0B; Fri, 11 Feb 2000 09:37:55 -0800 (PST) Received: (from ken@localhost) by panzer.kdm.org (8.9.3/8.9.1) id KAA57052; Fri, 11 Feb 2000 10:37:08 -0700 (MST) (envelope-from ken) Date: Fri, 11 Feb 2000 10:37:08 -0700 From: "Kenneth D. Merry" To: Peter Radcliffe Cc: Nick Hibma , Warner Losh , mobile@FreeBSD.ORG, scsi@FreeBSD.ORG Subject: Re: aic pccard attachment patch Message-ID: <20000211103708.A57034@panzer.kdm.org> References: <200001120657.XAA12127@harmony.village.org> <20000211111321.A12769@pir.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0i In-Reply-To: <20000211111321.A12769@pir.net>; from pir@pir.net on Fri, Feb 11, 2000 at 11:13:21AM -0500 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Fri, Feb 11, 2000 at 11:13:21 -0500, Peter Radcliffe wrote: > Nick Hibma probably said: > > A stupid question: did you try the detach? The detach in umass.c (new > > version) is exactly the same and it bombs my system, when trying to free > > the SIM. > > Using 3.4-PAO with the recently included aic stuff I don't have any > problems with detatch - don't know if this is exactly the same code, > though. > > I just can't mount any scsi cdrom drives :/ > Disks work fine, all the scsi kernel entries in place, the scsi cdrom > device is seen but doing anything with /dev/cd0* gives me "device > not configured" :/ Is your CD drive probed? Does it show up in the dmesg? Can you send your dmesg output? Ken -- Kenneth Merry ken@kdm.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Feb 11 9:53:24 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from polaris.we.lc.ehu.es (polaris.we.lc.ehu.es [158.227.6.43]) by builder.freebsd.org (Postfix) with ESMTP id 3F10847CE for ; Fri, 11 Feb 2000 09:52:43 -0800 (PST) Received: from we.lc.ehu.es (v-ger [158.227.6.179]) by polaris.we.lc.ehu.es (8.9.1/8.9.1) with ESMTP id SAA04627 for ; Fri, 11 Feb 2000 18:52:05 +0100 (MET) Message-ID: <38A44C3D.6B2B39A6@we.lc.ehu.es> Date: Fri, 11 Feb 2000 18:51:57 +0100 From: "Jose M. Alcaide" Organization: Universidad del =?iso-8859-1?Q?Pa=EDs?= Vasco - Dpto. de Electricidad y =?iso-8859-1?Q?Electr=F3nica?= X-Mailer: Mozilla 4.7 [en] (X11; U; FreeBSD 3.4-RELEASE i386) X-Accept-Language: es-ES, es, en-US, en MIME-Version: 1.0 To: freebsd-mobile@FreeBSD.org Subject: "interrupt-level buffer overflows" with Xircom RealPort Modem 56 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hello, I have just purchased a Xircom RealPort Modem 56 (PCMCIA). I easily got it working as sio1 adding an entry to pccard.conf. However, messages like these appeared on the console while I was testing the modem from user-ppp (term), typing commands such as "AT&V" or "ATI11", which give some lines of output: sio1: 31 more interrupt-level buffer overflows (total 31) sio1: 273 more interrupt-level buffer overflows (total 273) sio1: 437 more interrupt-level buffer overflows (total 710) ... and so on. After reading the sio(4) manpage and briefly examining sio.c, I disabled the FIFO with sio flags 0x20, and the messages went away. However, this modem supposedly has (or emulates) a 16550A, which has a 16-byte FIFO. I also tried sio flags 0x08 (polled output) and 0x08000000 (8-byte FIFO) to no avail. Only disabling the FIFO works, but this could affect performance. The laptop is new, a Dell Inspiron 3700 with a Celeron 433, so that this is not a CPU speed problem. And a PCMCIA Ethernet card works fine, so that this is not a general interrupt processing problem. A final note: I had "AUTO_EOI1" enabled in the kernel, but removing it did not make any effect on the buffer overflows. Any ideas? Is anyone using other similar Xircom modems, and having this same problem? Thanks, -- JMA ----------------------------------------------------------------------- José Mª Alcaide | mailto:jose@we.lc.ehu.es Universidad del País Vasco | mailto:jmas@FreeBSD.org Dpto. de Electricidad y Electrónica | http://www.we.lc.ehu.es/~jose Facultad de Ciencias - Campus de Lejona | Tel.: +34-946012479 48940 Lejona (Vizcaya) - SPAIN | Fax: +34-946013071 ----------------------------------------------------------------------- "Beware of Programmers who carry screwdrivers" -- Leonard Brandwein To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Feb 11 10:44:49 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from lunatic.oneinsane.net (lunatic.oneinsane.net [207.113.133.231]) by builder.freebsd.org (Postfix) with ESMTP id 73C0A4734 for ; Fri, 11 Feb 2000 10:44:31 -0800 (PST) Received: by lunatic.oneinsane.net (Postfix, from userid 1000) id 55DF91A9; Fri, 11 Feb 2000 10:44:21 -0800 (PST) Date: Fri, 11 Feb 2000 10:44:21 -0800 From: Ron 'The InSaNe One' Rosson To: freebsd-mobile@freebsd.org Subject: CVSUP PAO Message-ID: <20000211104421.A50639@lunatic.oneinsane.net> Reply-To: Ron Rosson Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0i X-Operating-System: FreeBSD lunatic.oneinsane.net 3.4-STABLE X-Moon: The Moon is Waxing Crescent (37% of Full) X-Opinion: What you read here is my IMHO X-Disclaimer: I am a firm believer in RTFM X-WWW: http://www.oneinsane.net X-PGP-KEY: http://www.oneinsane.net/~insane/insane2-pgp5i.txt X-Uptime: 10:39AM up 1 day, 18:06, 1 user, load averages: 0.00, 0.00, 0.00 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org When cvsuping PAO, is it as simple as doing it on a non pao box. For instance: Normal Server: cvsup stable-supfile cd /usr/src make world cd /usr/src/sys/i386/conf config GENERIC cd ../../compile/GENERIC make depend make make install shutdown -r now !!! New fresh system !!! PAO System: cvsup pao3-supfile cd ??? <------ should this be /usr/PAO3/src ??? make world cd /usr/src/sys/i386/conf config GENERIC cd ../../compile/GENERIC make depend make make install -- ------------------------------------------------------------------- Ron Rosson ... and a UNIX user said ... The InSaNe One rm -rf * insane@oneinsane.net and all was /dev/null and *void() ------------------------------------------------------------------- I'd explain it to you, but your brain would explode. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Feb 11 11:14:37 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from moek.pir.net (moek.pir.net [209.192.237.190]) by builder.freebsd.org (Postfix) with ESMTP id 88A5D4784; Fri, 11 Feb 2000 11:14:19 -0800 (PST) Received: from pir by moek.pir.net with local (Exim) id 12JLW5-0004VY-00 ; Fri, 11 Feb 2000 14:14:09 -0500 Date: Fri, 11 Feb 2000 14:14:09 -0500 From: Peter Radcliffe To: freebsd-mobile@freebsd.org, scsi@FreeBSD.ORG Subject: Re: Adaptec 1460B, PAO3 and cdrom drive problems. Message-ID: <20000211141408.C14877@pir.net> Mail-Followup-To: freebsd-mobile@freebsd.org, scsi@FreeBSD.ORG Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i X-fish: < Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Accidentally sent this to scsi, mobile and freebsd-mobile, so it bounced. P. ----- Forwarded message from Peter Radcliffe ----- "Kenneth D. Merry" probably said: > On Fri, Feb 11, 2000 at 11:13:21 -0500, Peter Radcliffe wrote: > > I just can't mount any scsi cdrom drives :/ > > Disks work fine, all the scsi kernel entries in place, the scsi cdrom > > device is seen but doing anything with /dev/cd0* gives me "device > > not configured" :/ > > Is your CD drive probed? Does it show up in the dmesg? Can you send your > dmesg output? Yes, yes, and yes. Heres what I sent to mobile origionally about this. Thanks, P. Peter Radcliffe probably said: > options SCSI_DELAY=8000 #Be pessimistic about Joe SCSI device > controller aic0 at isa? port ? cam irq ? disable > controller scbus0 > device da0 #SCSI direct access devices (aka disks) > device sa0 #SCSI tapes > device pass0 #CAM passthrough driver > device cd0 #Only need one of these, the code dynamically grows > device pt0 at scbus? # SCSI processor type > > > Card inserted, slot 0 > Feb 6 00:00:13 disapp pccardd[81]: Card "Adaptec, Inc."("APA-1460 SCSI > Host Adapter") [Version 0.01] [(null)] matched "Adaptec, Inc\." > ("APA-1460.*") [(null)] [(null)] > card0: assign aic0 iobase 0x340 irq 7 > aic0: aic6360, dma, disconnection, parity check > da0 at aic0 bus 0 target 3 lun 0 > da0: Fixed Direct Access SCSI-2 device > da0: 5.000MB/s transfers (5.000MHz, offset 8), Tagged Queueing Enabled > da0: 1006MB (2061108 512 byte sectors: 64H 32S/T 1006C) > > pir@disapp# mount /dev/da0s1e /mnt > pir@disapp# df /mnt > Filesystem 1K-blocks Used Avail Capacity Mounted on > /dev/da0s1e 998367 700337 218161 76% /mnt > pir@disapp# ls -aFl /mnt > total 700338 > drwxr-xr-x 2 root wheel 512 Feb 5 18:09 ./ > drwxr-xr-x 22 root wheel 512 Feb 6 00:00 ../ > -rw------- 1 root wheel 39413760 Feb 5 17:48 disapp..dump > -rw------- 1 root wheel 645324800 Feb 5 18:09 disapp.usr.dump > -rw------- 1 root wheel 32010240 Feb 5 18:09 disapp.var.dump > pir@disapp# umount /mnt > > > > > [...] > cd0 at aic0 bus 0 target 6 lun 0 > cd0: Removable CD-ROM SCSI-2 device > cd0: 5.000MB/s transfers (5.000MHz, offset 8) > cd0: cd present [1318424 x 512 byte records] > > pir@disapp# mount_cd9660 /dev/cd0a /mnt > mount_cd9660: Device not configured > pir@disapp# cdcontrol -f /dev/cd0a eject > cdcontrol: no disc in drive /dev/cd0a > pir@disapp# mount_cd9660 /dev/cd0c /mnt > mount_cd9660: Device not configured > pir@disapp# cdcontrol -f /dev/cd0c eject > cdcontrol: no disc in drive /dev/cd0a ----- End forwarded message ----- -- pir pir@pir.net pir@net.tufts.edu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Feb 11 11:41:44 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from panzer.kdm.org (panzer.kdm.org [216.160.178.169]) by builder.freebsd.org (Postfix) with ESMTP id 254643DB4; Fri, 11 Feb 2000 11:41:33 -0800 (PST) Received: (from ken@localhost) by panzer.kdm.org (8.9.3/8.9.1) id MAA57854; Fri, 11 Feb 2000 12:41:18 -0700 (MST) (envelope-from ken) Date: Fri, 11 Feb 2000 12:41:18 -0700 From: "Kenneth D. Merry" To: freebsd-mobile@FreeBSD.ORG, scsi@FreeBSD.ORG Subject: Re: Adaptec 1460B, PAO3 and cdrom drive problems. Message-ID: <20000211124118.A57790@panzer.kdm.org> References: <200001120657.XAA12127@harmony.village.org> <20000211111321.A12769@pir.net> <20000211103708.A57034@panzer.kdm.org> <20000204224930.B44997@cc942873-a.ewndsr1.nj.home.com> <200002052251.OAA12829@ptavv.es.net> <20000207175326.G9141@pir.net> <20000211134533.B14877@pir.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0i In-Reply-To: <20000211134533.B14877@pir.net>; from pir@pir.net on Fri, Feb 11, 2000 at 01:45:33PM -0500 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Fri, Feb 11, 2000 at 13:45:33 -0500, Peter Radcliffe wrote: > "Kenneth D. Merry" probably said: > > On Fri, Feb 11, 2000 at 11:13:21 -0500, Peter Radcliffe wrote: > > > I just can't mount any scsi cdrom drives :/ > > > Disks work fine, all the scsi kernel entries in place, the scsi cdrom > > > device is seen but doing anything with /dev/cd0* gives me "device > > > not configured" :/ > > > > Is your CD drive probed? Does it show up in the dmesg? Can you send your > > dmesg output? > > Yes, yes, and yes. > Heres what I sent to mobile origionally about this. [ ... ] > Peter Radcliffe probably said: > > options SCSI_DELAY=8000 #Be pessimistic about Joe SCSI device > > controller aic0 at isa? port ? cam irq ? disable > > controller scbus0 > > device da0 #SCSI direct access devices (aka disks) > > device sa0 #SCSI tapes > > device pass0 #CAM passthrough driver > > device cd0 #Only need one of these, the code dynamically grows > > device pt0 at scbus? # SCSI processor type [ ... ] > > > > > > > > [...] > > cd0 at aic0 bus 0 target 6 lun 0 > > cd0: Removable CD-ROM SCSI-2 device > > cd0: 5.000MB/s transfers (5.000MHz, offset 8) > > cd0: cd present [1318424 x 512 byte records] That's odd -- your CDROM drive is using 512 byte sectors. Try flipping the dip switch or whatever to change it to 2K sectors. > > pir@disapp# mount_cd9660 /dev/cd0a /mnt > > mount_cd9660: Device not configured > > pir@disapp# cdcontrol -f /dev/cd0a eject > > cdcontrol: no disc in drive /dev/cd0a > > pir@disapp# mount_cd9660 /dev/cd0c /mnt > > mount_cd9660: Device not configured > > pir@disapp# cdcontrol -f /dev/cd0c eject > > cdcontrol: no disc in drive /dev/cd0a Okay, try this: camcontrol tur cd0 -v camcontrol inquiry cd0 -v Maybe we can narrow this down to either a SCSI problem or some other sort of problem. Also, try changing your drive to 2K sectors. Ken -- Kenneth Merry ken@kdm.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Feb 11 12: 1:18 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from moek.pir.net (moek.pir.net [209.192.237.190]) by builder.freebsd.org (Postfix) with ESMTP id 4B97C3DAE; Fri, 11 Feb 2000 12:00:58 -0800 (PST) Received: from pir by moek.pir.net with local (Exim) id 12JMFF-0004m2-00 ; Fri, 11 Feb 2000 15:00:49 -0500 Date: Fri, 11 Feb 2000 15:00:48 -0500 From: Peter Radcliffe To: freebsd-mobile@FreeBSD.ORG, scsi@FreeBSD.ORG Subject: Re: Adaptec 1460B, PAO3 and cdrom drive problems. Message-ID: <20000211150048.J14877@pir.net> Mail-Followup-To: freebsd-mobile@FreeBSD.ORG, scsi@FreeBSD.ORG References: <200001120657.XAA12127@harmony.village.org> <20000211111321.A12769@pir.net> <20000211103708.A57034@panzer.kdm.org> <20000204224930.B44997@cc942873-a.ewndsr1.nj.home.com> <200002052251.OAA12829@ptavv.es.net> <20000207175326.G9141@pir.net> <20000211134533.B14877@pir.net> <20000211124118.A57790@panzer.kdm.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <20000211124118.A57790@panzer.kdm.org>; from ken@kdm.org on Fri, Feb 11, 2000 at 12:41:18PM -0700 X-fish: < Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org "Kenneth D. Merry" probably said: > That's odd -- your CDROM drive is using 512 byte sectors. Try flipping the > dip switch or whatever to change it to 2K sectors. I can't. It's a Sun cdrom drive, which only does 512 bytes. > camcontrol tur cd0 -v > camcontrol inquiry cd0 -v pir@disapp# camcontrol tur cd0 -v Unit is not ready (pass0:aic0:0:6:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (pass0:aic0:0:6:0): UNIT ATTENTION asc:28,0 (pass0:aic0:0:6:0): Not ready to ready change, medium may have changed pir@disapp# camcontrol tur cd0 -v Unit is ready pir@disapp# camcontrol inquiry cd0 -v pass0: Removable CD-ROM SCSI-2 device pass0: Serial Number [ pass0: 3.300MB/s transfers > Maybe we can narrow this down to either a SCSI problem or some other sort > of problem. Also, try changing your drive to 2K sectors. This setup works under windows, so I was assuming it wasn't a SCSI problem. The same drive works on my Adaptec 3940UW in my desktop FreeBSD box. Thanks, P. -- pir pir@pir.net pir@net.tufts.edu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Feb 11 12: 7:22 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from panzer.kdm.org (panzer.kdm.org [216.160.178.169]) by builder.freebsd.org (Postfix) with ESMTP id 6302A4170; Fri, 11 Feb 2000 12:06:49 -0800 (PST) Received: (from ken@localhost) by panzer.kdm.org (8.9.3/8.9.1) id NAA58047; Fri, 11 Feb 2000 13:06:38 -0700 (MST) (envelope-from ken) Date: Fri, 11 Feb 2000 13:06:38 -0700 From: "Kenneth D. Merry" To: Peter Radcliffe Cc: freebsd-mobile@FreeBSD.ORG, scsi@FreeBSD.ORG Subject: Re: Adaptec 1460B, PAO3 and cdrom drive problems. Message-ID: <20000211130638.A58011@panzer.kdm.org> References: <200001120657.XAA12127@harmony.village.org> <20000211111321.A12769@pir.net> <20000211103708.A57034@panzer.kdm.org> <20000204224930.B44997@cc942873-a.ewndsr1.nj.home.com> <200002052251.OAA12829@ptavv.es.net> <20000207175326.G9141@pir.net> <20000211134533.B14877@pir.net> <20000211124118.A57790@panzer.kdm.org> <20000211150048.J14877@pir.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0i In-Reply-To: <20000211150048.J14877@pir.net>; from pir@pir.net on Fri, Feb 11, 2000 at 03:00:48PM -0500 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Fri, Feb 11, 2000 at 15:00:48 -0500, Peter Radcliffe wrote: > "Kenneth D. Merry" probably said: > > That's odd -- your CDROM drive is using 512 byte sectors. Try flipping the > > dip switch or whatever to change it to 2K sectors. > > I can't. It's a Sun cdrom drive, which only does 512 bytes. Ahh. > > camcontrol tur cd0 -v > > camcontrol inquiry cd0 -v > > pir@disapp# camcontrol tur cd0 -v > Unit is not ready > (pass0:aic0:0:6:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 > (pass0:aic0:0:6:0): UNIT ATTENTION asc:28,0 > (pass0:aic0:0:6:0): Not ready to ready change, medium may have changed > pir@disapp# camcontrol tur cd0 -v > Unit is ready > pir@disapp# camcontrol inquiry cd0 -v > pass0: Removable CD-ROM SCSI-2 device > pass0: Serial Number [ > pass0: 3.300MB/s transfers > > > Maybe we can narrow this down to either a SCSI problem or some other sort > > of problem. Also, try changing your drive to 2K sectors. > > This setup works under windows, so I was assuming it wasn't a SCSI > problem. The same drive works on my Adaptec 3940UW in my desktop > FreeBSD box. Hmm. Well, try putting some printfs in cdopen() in src/sys/cam/scsi/scsi_cd.c, and see where it is bailing out. Ken -- Kenneth Merry ken@kdm.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Feb 11 12:43: 6 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from moek.pir.net (moek.pir.net [209.192.237.190]) by builder.freebsd.org (Postfix) with ESMTP id C52133DAD; Fri, 11 Feb 2000 12:42:56 -0800 (PST) Received: from pir by moek.pir.net with local (Exim) id 12JMtn-0004zv-00 ; Fri, 11 Feb 2000 15:42:43 -0500 Date: Fri, 11 Feb 2000 15:42:42 -0500 From: Peter Radcliffe To: "Kenneth D. Merry" Cc: freebsd-mobile@FreeBSD.ORG, scsi@FreeBSD.ORG Subject: Re: Adaptec 1460B, PAO3 and cdrom drive problems. Message-ID: <20000211154242.K14877@pir.net> Mail-Followup-To: "Kenneth D. Merry" , freebsd-mobile@FreeBSD.ORG, scsi@FreeBSD.ORG References: <20000211111321.A12769@pir.net> <20000211103708.A57034@panzer.kdm.org> <20000204224930.B44997@cc942873-a.ewndsr1.nj.home.com> <200002052251.OAA12829@ptavv.es.net> <20000207175326.G9141@pir.net> <20000211134533.B14877@pir.net> <20000211124118.A57790@panzer.kdm.org> <20000211150048.J14877@pir.net> <20000211130638.A58011@panzer.kdm.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <20000211130638.A58011@panzer.kdm.org>; from ken@kdm.org on Fri, Feb 11, 2000 at 01:06:38PM -0700 X-fish: < Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org "Kenneth D. Merry" probably said: > Hmm. Well, try putting some printfs in cdopen() in > src/sys/cam/scsi/scsi_cd.c, and see where it is bailing out. I did that (and added CAM_DEBUG), recompiled, rebooted, tested and got ... no printfs. A little more poking showed up some differences between /dev/cd0* on the laptop and /dev/cd0* on another machine. cd /dev; ./MAKEDEV cd0 solved the problem. Mounts fine now :) Thanks for the help - turned out to be my fault. P. -- pir pir@pir.net pir@net.tufts.edu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat Feb 12 1:18: 6 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from smtp.shikoku.ne.jp (smtp.shikoku.ne.jp [210.157.171.3]) by builder.freebsd.org (Postfix) with SMTP id 0F1DA3DA4 for ; Sat, 12 Feb 2000 01:18:03 -0800 (PST) Received: (qmail 28868 invoked by alias); 12 Feb 2000 18:17:58 +0900 Received: (qmail 28855 invoked from network); 12 Feb 2000 18:17:56 +0900 Received: from a087.uwajima.shikoku.ne.jp (HELO shikoku.ne.jp) (210.157.174.87) by smtp.shikoku.ne.jp with SMTP; 12 Feb 2000 18:17:56 +0900 Date: Sat, 12 Feb 2000 18:15:58 +0900 (JST) Message-Id: <20000212.181558.104040061.nin@smtp.shikoku.ne.jp> To: insane@lunatic.oneinsane.net Cc: freebsd-mobile@freebsd.org Subject: Re: CVSUP PAO From: Ninomiya Hideyuki In-Reply-To: <20000211104421.A50639@lunatic.oneinsane.net> References: <20000211104421.A50639@lunatic.oneinsane.net> X-Mailer: Mew version 1.95b26 on XEmacs 21.1 (Bryce Canyon) X-PGP-Fingerprint: 6C59 EC08 5B23 6490 44D0 7CD3 DA40 219F 7114 8553 X-PGP-Public-Key: http://user.shikoku.ne.jp/~nin/pgp/public-key.txt X-URL: http://user.shikoku.ne.jp/~nin/index.html Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hello ! I'm Japanese PAO user. "Ron 'The InSaNe One' Rosson" wrote Fri, 11 Feb 2000 10:44:21 -0800 Subject: CVSUP PAO Message-ID: <20000211104421.A50639@lunatic.oneinsane.net> > When cvsuping PAO, is it as simple as doing it on a non pao box. For > instance: > PAO System: > cvsup pao3-supfile > cd ??? <------ should this be /usr/PAO3/src ??? Yes. cd /usr/PAO3/src/ > make world No. There is not a "world" target in PAO source Makefile. cd /usr/PAO3/src/include.PAO make make install cd .. make make install I think that You had better do it in this way. > cd /usr/src/sys/i386/conf No. usr/src/sys/i386/conf is not the place of PAO. It is just /usr/PAO3/src/sys/i386/conf. > config GENERIC No. GENERIC configuration file is not a thing of PAO. Identifier of a normal thing of configuration file of PAO is PAO_ALL. It is right to do with config PAO_ALL If this mail is useful for you, I am happy. --- * This message is a thing by output of automatic translation. * * Therefore it will be for there to be a lot of funny parts. * * Please approve it. * Ninomiya(family name) Hideyuki(fast name) @ ehime japan mailto:nin@shikoku.ne.jp PGP-Fingerprint:6C59 EC08 5B23 6490 44D0 7CD3 DA40 219F 7114 8553 PGP-Public-Key: http://user.shikoku.ne.jp/~nin/pgp/public-key.txt To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat Feb 12 5:40:29 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from pimout4-int.prodigy.net (pimout4-1.prodigy.net [207.115.58.238]) by builder.freebsd.org (Postfix) with ESMTP id 14C433F36 for ; Sat, 12 Feb 2000 05:40:26 -0800 (PST) Received: from prodigy.net (CHRLB107-29.splitrock.net [209.252.206.6]) by pimout4-int.prodigy.net (8.8.5/8.8.5) with ESMTP id IAA38308 for ; Sat, 12 Feb 2000 08:40:20 -0500 Message-ID: <38A561F1.E34382FD@prodigy.net> Date: Sat, 12 Feb 2000 08:36:49 -0500 From: Ken Hoelmer X-Mailer: Mozilla 4.7 [en] (X11; I; Linux 2.2.14 i686) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-mobile@FreeBSD.ORG Subject: no card in database for ""("") Content-Type: multipart/mixed; boundary="------------522DE840D9ADDED7E4ED18CA" Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org This is a multi-part message in MIME format. --------------522DE840D9ADDED7E4ED18CA Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Newbie question: I am receiving the no card in database for ""("") message after making the changes and recompiling FreeBSD 3.4 on my Dell Latitude P3-500 with the Xircom RealPort Ethernet/Modem (32 bit). If I run the pccardc dumpcis - I only get back two lines. not the many lines I have seen on other's pages. Where and what do I need to modify to eliminate that message and get the PCMCIA card working? Everything else is working beautifully. Thanks in advance, Ken --------------522DE840D9ADDED7E4ED18CA Content-Type: text/x-vcard; charset=us-ascii; name="kwhoelmer.vcf" Content-Transfer-Encoding: 7bit Content-Description: Card for Ken Hoelmer Content-Disposition: attachment; filename="kwhoelmer.vcf" begin:vcard n:Hoelmer;Ken tel;home:704-598-8668 tel;work:704-423-2526 x-mozilla-html:TRUE url:http://pages.prodigy.net/kwhoelmer adr:;;4624 Kirkgard Trail;Charlotte;NC;28269;USA version:2.1 email;internet:kwhoelmer@prodigy.net x-mozilla-cpt:;0 fn:Ken Hoelmer end:vcard --------------522DE840D9ADDED7E4ED18CA-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat Feb 12 6:15: 0 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from polaris.we.lc.ehu.es (polaris.we.lc.ehu.es [158.227.6.43]) by builder.freebsd.org (Postfix) with ESMTP id 81C3B3E85; Sat, 12 Feb 2000 06:14:54 -0800 (PST) Received: from we.lc.ehu.es (lxpxdo.lx.ehu.es [158.227.99.192]) by polaris.we.lc.ehu.es (8.9.1/8.9.1) with ESMTP id PAA06288; Sat, 12 Feb 2000 15:14:49 +0100 (MET) Message-ID: <38A56AD6.8C3E1A97@we.lc.ehu.es> Date: Sat, 12 Feb 2000 15:14:46 +0100 From: "Jose M. Alcaide" Organization: Universidad del =?iso-8859-1?Q?Pa=EDs?= Vasco - Dpto. de Electricidad y =?iso-8859-1?Q?Electr=F3nica?= X-Mailer: Mozilla 4.7 [en] (X11; U; FreeBSD 3.4-RELEASE i386) X-Accept-Language: es-ES, es, en-US, en MIME-Version: 1.0 To: freebsd-hardware@FreeBSD.org Cc: freebsd-mobile@FreeBSD.org Subject: [fix and RFC] interrupt-level buffer overflows with Xircom PCMCIA modem Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I have just purchased a Xircom RealPort Modem 56, which I easily got working as sio1 after adding an entry to pccard.conf (the laptop runs 3.4-RELEASE). However, I was getting many messages like these on the console: sio1: 31 more interrupt-level buffer overflows (total 31) sio1: 273 more interrupt-level buffer overflows (total 273) sio1: 437 more interrupt-level buffer overflows (total 710) ... and so on. I tested this problem simply using the user-ppp's terminal, and typing modem commands such as "AT&V" or "ATI11", which give several lines of output. I must clearly state that the modem has RTS/CTS flow control enabled (AT&K3). And the laptop is new: a Dell Inspiron 3700 with a Celeron-433 processor, so that the system speed or load are not the causes of this problem. The first "solution" I tried was to disable the 16550A's FIFO using the sio(4) flag "0x02". The messages went away, indeed, but I was seeing ~3000 interrupts/second for sio1, and this is very bad. Then, I thought that increasing the sio's receive and/or send buffer sizes could be a better solution, so that after reading sys/i386/isa/sio.c I found the RS_IBUFSIZE macro, #defined to 256, and I incremented its value to 1024. This means that the memory dedicated to sio buffers grow from 1 Kbyte to 4 Kbyte for each sio device. Anyway, I compiled a new kernel and the buffer overflows dissapeared (with the 16550A's FIFO re-enabled, of course). Now, the conclusions: perhaps RS_IBUFSIZE=256 is too low for some devices (notably internal modems); it's only a theory. Or perhaps some devices have problems with RTS/CTS flow control. In any case, I suggest the addition of a new kernel configuration option for permitting to change RS_IBUFSIZE to any desired value. Any comments or ideas? -- JMA ----------------------------------------------------------------------- José Mª Alcaide | mailto:jose@we.lc.ehu.es Universidad del País Vasco | mailto:jmas@FreeBSD.org Dpto. de Electricidad y Electrónica | http://www.we.lc.ehu.es/~jose Facultad de Ciencias - Campus de Lejona | Tel.: +34-946012479 48940 Lejona (Vizcaya) - SPAIN | Fax: +34-946013071 ----------------------------------------------------------------------- "Beware of Programmers who carry screwdrivers" -- Leonard Brandwein To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat Feb 12 7:54:28 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from smtp1.san.rr.com (smtp1.san.rr.com [24.25.195.37]) by builder.freebsd.org (Postfix) with ESMTP id 256353F17 for ; Sat, 12 Feb 2000 07:54:26 -0800 (PST) Received: from ucsd.edu ([24.30.148.224]) by smtp1.san.rr.com (Post.Office MTA v3.5.3 release 223 ID# 0-0U10L2S100V35) with ESMTP id com; Sat, 12 Feb 2000 07:54:25 -0800 Message-ID: <38A5822A.7829CAA2@ucsd.edu> Date: Sat, 12 Feb 2000 07:54:18 -0800 From: Eric Hedstrom X-Mailer: Mozilla 4.7 [en] (Win95; U) X-Accept-Language: en MIME-Version: 1.0 To: Ken Hoelmer Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: no card in database for ""("") References: <38A561F1.E34382FD@prodigy.net> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Howdy, Ken Hoelmer wrote: > > Newbie question: I am receiving the no card in database for ""("") > message after making the changes and recompiling FreeBSD 3.4 on my Dell > Latitude P3-500 with the Xircom RealPort Ethernet/Modem (32 bit). ^^^^^^ This is the problem--Cardbus cards aren't supported yet. Eric To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat Feb 12 9:13:58 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from mailman.zeta.org.au (mailman.zeta.org.au [203.26.10.16]) by builder.freebsd.org (Postfix) with ESMTP id 55E013F45; Sat, 12 Feb 2000 09:13:46 -0800 (PST) Received: from bde.zeta.org.au (bde.zeta.org.au [203.2.228.102]) by mailman.zeta.org.au (8.8.7/8.8.7) with ESMTP id EAA09932; Sun, 13 Feb 2000 04:16:21 +1100 Date: Sun, 13 Feb 2000 04:13:19 +1100 (EST) From: Bruce Evans X-Sender: bde@alphplex.bde.org To: "Jose M. Alcaide" Cc: freebsd-hardware@FreeBSD.ORG, freebsd-mobile@FreeBSD.ORG Subject: Re: [fix and RFC] interrupt-level buffer overflows with Xircom PCMCIA modem In-Reply-To: <38A56AD6.8C3E1A97@we.lc.ehu.es> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Sat, 12 Feb 2000, Jose M. Alcaide wrote: > Now, the conclusions: perhaps RS_IBUFSIZE=256 is too low for some devices > (notably internal modems); it's only a theory. Or perhaps some devices Too large for devices with broken 16550 emulation. > have problems with RTS/CTS flow control. In any case, I suggest RTS emulation is probably also broken for there to be a problem. Ideally, the sender should check its version of RTS (i.e., CTS) before sending each character. For bug for bug compatibility with 16550 senders, the sender only needs to check it every 16th character. > the addition of a new kernel configuration option for permitting > to change RS_IBUFSIZE to any desired value. RS_IBUFSIZE doesn't exist in -current. Instead, the buffer is sized to hold 4 ticks (4.0 / hz seconds) worth of input at the current input speed (or 128 bytes if that is larger). Bruce To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat Feb 12 11: 2: 2 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from freesbee.wheel.dk (freesbee.wheel.dk [193.162.159.97]) by builder.freebsd.org (Postfix) with ESMTP id 982DE3FAB for ; Sat, 12 Feb 2000 11:01:44 -0800 (PST) Received: by freesbee.wheel.dk (Postfix, from userid 1001) id 8FC443E3D; Sat, 12 Feb 2000 20:01:05 +0100 (CET) Date: Sat, 12 Feb 2000 20:01:05 +0100 From: Jesper Skriver To: mobile@FreeBSD.org Subject: Support for Eicon Diva Pro ISDN pccard adapter Message-ID: <20000212200105.A36317@skriver.dk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0i Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, Does anyone have any idea of how to get such a thing to work (in -current) ? I assume it's just a serial port to the system, but the below says Tuple #4, code = 0x21 (Functional ID), length = 2 000: 06 00 Network/LAN adapter I don't know is this means, that it's not a serial port, or ? pccardc dumpcis: Configuration data for card in slot 1 Tuple #1, code = 0x1 (Common memory descriptor), length = 3 000: 00 00 ff Common memory device information: Device number 1, type No device, WPS = OFF Speed = No speed, Memory block size = 512b, 1 units Tuple #2, code = 0x15 (Version 1 info), length = 37 000: 01 04 45 69 63 6f 6e 20 44 69 65 68 6c 00 44 69 010: 76 61 20 50 72 6f 00 30 35 2e 30 33 2e 39 36 00 020: 31 2d 31 00 ff Version = 1.4, Manuf = [Eicon Diehl],card vers = [Diva Pro] Addit. info = [05.03.96],[1-1] Tuple #3, code = 0x20 (Manufacturer ID), length = 4 000: 21 01 32 20 PCMCIA ID = 0x121, OEM ID = 0x2032 Tuple #4, code = 0x21 (Functional ID), length = 2 000: 06 00 Network/LAN adapter Tuple #5, code = 0x1a (Configuration map), length = 6 000: 01 01 c0 00 01 ff Reg len = 2, config register addr = 0xc0, last config = 0x1 Registers: X------- Tuple #6, code = 0x1b (Configuration entry), length = 12 000: c1 81 19 71 55 7d 7d 7d 44 30 ff ff Config index = 0x1(default) Interface byte = 0x81 (I/O) wait signal supported Vcc pwr: Nominal operating supply voltage: 5 x 1V Max current average over 1 second: 9 x 10mA Max current average over 10 ms: 9 x 10mA Power down supply current: 9 x 10mA Card decodes 4 address lines, limited 8/16 Bit I/O IRQ modes: Pulse IRQ level = 4 Tuple #7, code = 0x14 (No link), length = 0 Tuple #8, code = 0xff (Terminator), length = 0 /Jesper -- Jesper Skriver, jesper(at)skriver(dot)dk - CCIE #5456 Work: Network manager @ AS3292 (Tele Danmark DataNetworks) Private: Geek @ AS2109 (A much smaller network ;-) One Unix to rule them all, One Resolver to find them, One IP to bring them all and in the zone to bind them. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat Feb 12 11:10: 9 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from mass.cdrom.com (castles560.castles.com [208.214.165.124]) by builder.freebsd.org (Postfix) with ESMTP id 3FABE3F5D for ; Sat, 12 Feb 2000 11:10:04 -0800 (PST) Received: from mass.cdrom.com (localhost [127.0.0.1]) by mass.cdrom.com (8.9.3/8.9.3) with ESMTP id LAA04520; Sat, 12 Feb 2000 11:21:19 -0800 (PST) (envelope-from msmith@mass.cdrom.com) Message-Id: <200002121921.LAA04520@mass.cdrom.com> X-Mailer: exmh version 2.1.1 10/15/1999 To: Jesper Skriver Cc: mobile@FreeBSD.org Subject: Re: Support for Eicon Diva Pro ISDN pccard adapter In-reply-to: Your message of "Sat, 12 Feb 2000 20:01:05 +0100." <20000212200105.A36317@skriver.dk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Sat, 12 Feb 2000 11:21:18 -0800 From: Mike Smith Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > Hi, > > Does anyone have any idea of how to get such a thing to work (in > -current) ? > > I assume it's just a serial port to the system, but the below says > > Tuple #4, code = 0x21 (Functional ID), length = 2 > 000: 06 00 > Network/LAN adapter > > I don't know is this means, that it's not a serial port, or ? That's correct. > pccardc dumpcis: The information here is probably not enough for our braindead pccard code to get it right; with no configuration entries it won't be able to guesstimate a valid configuration. It's impossible to tell from this whether the card does or doesn't look like a serial port; I'd say more likely not though (it has 16 I/O registers, rather than the 8 that a standard UART has). > Configuration data for card in slot 1 > Tuple #1, code = 0x1 (Common memory descriptor), length = 3 > 000: 00 00 ff > Common memory device information: > Device number 1, type No device, WPS = OFF > Speed = No speed, Memory block size = 512b, 1 units > Tuple #2, code = 0x15 (Version 1 info), length = 37 > 000: 01 04 45 69 63 6f 6e 20 44 69 65 68 6c 00 44 69 > 010: 76 61 20 50 72 6f 00 30 35 2e 30 33 2e 39 36 00 > 020: 31 2d 31 00 ff > Version = 1.4, Manuf = [Eicon Diehl],card vers = [Diva Pro] > Addit. info = [05.03.96],[1-1] > Tuple #3, code = 0x20 (Manufacturer ID), length = 4 > 000: 21 01 32 20 > PCMCIA ID = 0x121, OEM ID = 0x2032 > Tuple #4, code = 0x21 (Functional ID), length = 2 > 000: 06 00 > Network/LAN adapter > Tuple #5, code = 0x1a (Configuration map), length = 6 > 000: 01 01 c0 00 01 ff > Reg len = 2, config register addr = 0xc0, last config = 0x1 > Registers: X------- > Tuple #6, code = 0x1b (Configuration entry), length = 12 > 000: c1 81 19 71 55 7d 7d 7d 44 30 ff ff > Config index = 0x1(default) > Interface byte = 0x81 (I/O) wait signal supported > Vcc pwr: > Nominal operating supply voltage: 5 x 1V > Max current average over 1 second: 9 x 10mA > Max current average over 10 ms: 9 x 10mA > Power down supply current: 9 x 10mA > Card decodes 4 address lines, limited 8/16 Bit I/O > IRQ modes: Pulse > IRQ level = 4 > Tuple #7, code = 0x14 (No link), length = 0 > Tuple #8, code = 0xff (Terminator), length = 0 > > > /Jesper > > -- > Jesper Skriver, jesper(at)skriver(dot)dk - CCIE #5456 > Work: Network manager @ AS3292 (Tele Danmark DataNetworks) > Private: Geek @ AS2109 (A much smaller network ;-) > > One Unix to rule them all, One Resolver to find them, > One IP to bring them all and in the zone to bind them. > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-mobile" in the body of the message > -- \\ Give a man a fish, and you feed him for a day. \\ Mike Smith \\ Tell him he should learn how to fish himself, \\ msmith@freebsd.org \\ and he'll hate you for a lifetime. \\ msmith@cdrom.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat Feb 12 13:44:33 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from pollux.nevada.edu (pollux.nevada.edu [131.216.1.217]) by builder.freebsd.org (Postfix) with ESMTP id 115C74033 for ; Sat, 12 Feb 2000 13:44:31 -0800 (PST) Received: from localhost (slumos@localhost) by pollux.nevada.edu (8.8.8/8.8.8) with ESMTP id NAA17386 for ; Sat, 12 Feb 2000 13:44:32 -0800 (PST) X-Authentication-Warning: pollux.nevada.edu: slumos owned process doing -bs Date: Sat, 12 Feb 2000 13:44:31 -0800 (PST) From: Steve Lumos To: freebsd-mobile@freebsd.org Subject: OZ6832 Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I'm trying to get running on an IBM Thinkpad i1452, but the O2micro OZ6832 PC-Card (vendor = 1217, dev = 6832) bridge does not appear to be supported. I've tried 3.4-RELEASE and PAO3. I peeked at the 4.0 sources and there is no detection code for it there either. Net searching shows messages going back to 2.2.6, so I assume this is not a new chip. There were even patches posted to bsd-nomads (in 1998), but I can't read the surrounding text so I havn't tried applying them. Can anybody tell me anything about this chip? I also have a 3Com/Mhz 10/100 LAN Card (3CCFE574BT) that is not specifically listed as supported, but I was planning to just try the ep driver. Is anyone else using this card successfully? Does anyone know an alternate place to search FreeBSD mailing lists until the main site is back up? Thanks. Steve To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat Feb 12 13:54:52 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from mail.nyct.net (bsd4.nyct.net [204.141.86.6]) by builder.freebsd.org (Postfix) with ESMTP id B242B3FD8 for ; Sat, 12 Feb 2000 13:54:49 -0800 (PST) Received: from bsd1.nyct.net (efutch@bsd1.nyct.net [204.141.86.3]) by mail.nyct.net (8.8.8/8.8.7) with ESMTP id QAA05194; Sat, 12 Feb 2000 16:54:47 -0500 (EST) (envelope-from efutch@nyct.net) Date: Sat, 12 Feb 2000 16:54:47 -0500 (EST) From: "Eric D. Futch" To: Steve Lumos Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: OZ6832 In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Sat, 12 Feb 2000, Steve Lumos wrote: >I also have a 3Com/Mhz 10/100 LAN Card (3CCFE574BT) that is not >specifically listed as supported, but I was planning to just try the ep >driver. Is anyone else using this card successfully? > I've been using this card in my old 486 laptop running PAO3, since I broke the X-Jack off my OfficeConnect 572BT anyway. I seems to work very well. > >Steve > -- Eric Futch New York Connect.Net, Ltd. efutch@nyct.net Technical Support Staff http://www.nyct.net (212) 293-2620 "Bringing New York The Internet Access It Deserves" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat Feb 12 14:24:27 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from ptldpop2.ptld.uswest.net (ptldpop2.ptld.uswest.net [198.36.160.2]) by builder.freebsd.org (Postfix) with SMTP id 034EC4006 for ; Sat, 12 Feb 2000 14:24:25 -0800 (PST) Received: (qmail 26357 invoked by alias); 12 Feb 2000 22:24:24 -0000 Delivered-To: fixup-freebsd-mobile@FreeBSD.ORG@fixme Received: (qmail 26230 invoked by uid 0); 12 Feb 2000 22:24:17 -0000 Received: from fdslppp250.ptld.uswest.net (HELO laptop.cybcon.com) (216.161.92.250) by ptldpop2.ptld.uswest.net with SMTP; 12 Feb 2000 22:24:17 -0000 Content-Length: 1260 Message-ID: X-Mailer: XFMail 1.4.0 on FreeBSD X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 In-Reply-To: Date: Sat, 12 Feb 2000 14:24:04 -0800 (PST) Reply-To: bwoods2@uswest.net From: William Woods To: "Eric D. Futch" Subject: Re: OZ6832 Cc: freebsd-mobile@FreeBSD.ORG, Steve Lumos Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Sure am useing it, here is my pccard.conf listing for it. #3Com Fast Etherlink card "3Com" "Megahertz 574B" config 0x1 "ep0" 9 insert echo 3Com Fast Etherlink 3C574B inserted insert /etc/pccard_ether ep0 remove echo 3Com Fast Etherlink 3C574B removed remove /sbin/ifconfig ep0 delete On 12-Feb-00 Eric D. Futch wrote: > On Sat, 12 Feb 2000, Steve Lumos wrote: > >>I also have a 3Com/Mhz 10/100 LAN Card (3CCFE574BT) that is not >>specifically listed as supported, but I was planning to just try the ep >>driver. Is anyone else using this card successfully? >> > I've been using this card in my old 486 laptop running PAO3, since I broke > the X-Jack off my OfficeConnect 572BT anyway. I seems to work very well. > >> >>Steve >> > > -- > Eric Futch New York Connect.Net, Ltd. > efutch@nyct.net Technical Support Staff > http://www.nyct.net (212) 293-2620 > "Bringing New York The Internet Access It Deserves" > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-mobile" in the body of the message ---------------------------------- E-Mail: William Woods Date: 12-Feb-00 Time: 14:23:11l ---------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat Feb 12 15: 4:58 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from smtp1.san.rr.com (smtp1.san.rr.com [24.25.195.37]) by builder.freebsd.org (Postfix) with ESMTP id A862A409E for ; Sat, 12 Feb 2000 15:04:51 -0800 (PST) Received: from ucsd.edu ([24.30.148.224]) by smtp1.san.rr.com (Post.Office MTA v3.5.3 release 223 ID# 0-0U10L2S100V35) with ESMTP id com; Sat, 12 Feb 2000 15:04:54 -0800 Message-ID: <38A5E70E.31C12349@ucsd.edu> Date: Sat, 12 Feb 2000 15:04:46 -0800 From: Eric Hedstrom X-Mailer: Mozilla 4.7 [en] (Win95; U) X-Accept-Language: en MIME-Version: 1.0 To: Steve Lumos Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: OZ6832 References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org You need to turn off Cardbus support in the Thinkpad's BIOS setup. Also, if you have Windows on the same machine, turn the computer off before booting FreeBSD, rather than just rebooting from Windows. Eric Steve Lumos wrote: > > I'm trying to get running on an IBM Thinkpad i1452, but the O2micro OZ6832 > PC-Card (vendor = 1217, dev = 6832) bridge does not appear to be > supported. I've tried 3.4-RELEASE and PAO3. I peeked at the 4.0 sources > and there is no detection code for it there either. > > Net searching shows messages going back to 2.2.6, so I assume this is not > a new chip. There were even patches posted to bsd-nomads (in 1998), but I > can't read the surrounding text so I havn't tried applying them. > > Can anybody tell me anything about this chip? > > I also have a 3Com/Mhz 10/100 LAN Card (3CCFE574BT) that is not > specifically listed as supported, but I was planning to just try the ep > driver. Is anyone else using this card successfully? > > Does anyone know an alternate place to search FreeBSD mailing lists until > the main site is back up? > > Thanks. > > Steve > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-mobile" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat Feb 12 16: 4:25 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from pollux.nevada.edu (pollux.nevada.edu [131.216.1.217]) by builder.freebsd.org (Postfix) with ESMTP id A0A7E4134 for ; Sat, 12 Feb 2000 16:04:22 -0800 (PST) Received: from localhost (slumos@localhost) by pollux.nevada.edu (8.8.8/8.8.8) with ESMTP id QAA19628; Sat, 12 Feb 2000 16:04:23 -0800 (PST) X-Authentication-Warning: pollux.nevada.edu: slumos owned process doing -bs Date: Sat, 12 Feb 2000 16:04:23 -0800 (PST) From: Steve Lumos To: Eric Hedstrom Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: OZ6832 In-Reply-To: <38A5E70E.31C12349@ucsd.edu> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Sat, 12 Feb 2000, Eric Hedstrom wrote: > You need to turn off Cardbus support in the Thinkpad's BIOS setup. Also, if > you have Windows on the same machine, turn the computer off before booting > FreeBSD, rather than just rebooting from Windows. > > Eric I don't see any place in the BIOS setup or the "Notebook Manager" setup program under Windows where I can do that. Are there any other i Series users out there who have it working? Steve To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat Feb 12 18:58:54 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from smtp1.san.rr.com (smtp1.san.rr.com [24.25.195.37]) by builder.freebsd.org (Postfix) with ESMTP id 69850409C for ; Sat, 12 Feb 2000 18:58:51 -0800 (PST) Received: from ucsd.edu ([24.30.148.224]) by smtp1.san.rr.com (Post.Office MTA v3.5.3 release 223 ID# 0-0U10L2S100V35) with ESMTP id com; Sat, 12 Feb 2000 18:58:54 -0800 Message-ID: <38A61DE6.3451C7E@ucsd.edu> Date: Sat, 12 Feb 2000 18:58:46 -0800 From: Eric Hedstrom X-Mailer: Mozilla 4.7 [en] (Win95; U) X-Accept-Language: en MIME-Version: 1.0 To: Steve Lumos Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: OZ6832 References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org What version of FreeBSD are you using? I got both 2.2.8 and 3.4-RELEASE (not PAO) going this way on a Thinkpad 1410 (which has the same O2micro controller). On the 1410 you hit F1 at boot time to get into BIOS setup, and Cardbus enable/disable is an option on the "Advanced Settings" screen. Can you send in a dmesg of what it does find? Eric Steve Lumos wrote: > > On Sat, 12 Feb 2000, Eric Hedstrom wrote: > > You need to turn off Cardbus support in the Thinkpad's BIOS setup. Also, if > > you have Windows on the same machine, turn the computer off before booting > > FreeBSD, rather than just rebooting from Windows. > > > > Eric > > I don't see any place in the BIOS setup or the "Notebook Manager" setup > program under Windows where I can do that. Are there any other i Series > users out there who have it working? > > Steve To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Feb 13 0:48:41 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from rover.village.org (rover.village.org [204.144.255.49]) by builder.freebsd.org (Postfix) with ESMTP id E4B483E31; Sun, 13 Feb 2000 00:48:38 -0800 (PST) Received: from harmony.village.org (harmony.village.org [10.0.0.6]) by rover.village.org (8.9.3/8.9.3) with ESMTP id BAA58767; Sun, 13 Feb 2000 01:48:42 -0700 (MST) (envelope-from imp@harmony.village.org) Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id BAA62580; Sun, 13 Feb 2000 01:50:13 -0700 (MST) Message-Id: <200002130850.BAA62580@harmony.village.org> To: Mike Smith Subject: Re: Support for Eicon Diva Pro ISDN pccard adapter Cc: Jesper Skriver , mobile@FreeBSD.ORG In-reply-to: Your message of "Sat, 12 Feb 2000 11:21:18 PST." <200002121921.LAA04520@mass.cdrom.com> References: <200002121921.LAA04520@mass.cdrom.com> Date: Sun, 13 Feb 2000 01:50:13 -0700 From: Warner Losh Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In message <200002121921.LAA04520@mass.cdrom.com> Mike Smith writes: : The information here is probably not enough for our braindead pccard code : to get it right; with no configuration entries it won't be able to : guesstimate a valid configuration. But there are config entries. The pccard should be able to cope with it. I don't see anything in the CIS that pccard would have trouble with. braindead likely is a bit strong... : > Card decodes 4 address lines, limited 8/16 Bit I/O We can put this at any 16 byte boundary.... : It's impossible to tell from this : whether the card does or doesn't look like a serial port; I'd say more : likely not though (it has 16 I/O registers, rather than the 8 that a : standard UART has). Most pccard that implement ISDN have special register sets. This card doesn't sound familiar. Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Feb 13 1:55:29 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from freesbee.wheel.dk (freesbee.wheel.dk [193.162.159.97]) by builder.freebsd.org (Postfix) with ESMTP id CDDB24160 for ; Sun, 13 Feb 2000 01:55:27 -0800 (PST) Received: by freesbee.wheel.dk (Postfix, from userid 1001) id B3CD43E3C; Sun, 13 Feb 2000 10:55:32 +0100 (CET) Date: Sun, 13 Feb 2000 10:55:32 +0100 From: Jesper Skriver To: Warner Losh Cc: mobile@FreeBSD.ORG Subject: Re: Support for Eicon Diva Pro ISDN pccard adapter Message-ID: <20000213105532.B38687@skriver.dk> References: <200002121921.LAA04520@mass.cdrom.com> <200002130850.BAA62580@harmony.village.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0i In-Reply-To: <200002130850.BAA62580@harmony.village.org>; from imp@village.org on Sun, Feb 13, 2000 at 01:50:13AM -0700 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Sun, Feb 13, 2000 at 01:50:13AM -0700, Warner Losh wrote: > In message <200002121921.LAA04520@mass.cdrom.com> Mike Smith writes: > : The information here is probably not enough for our braindead pccard code > : to get it right; with no configuration entries it won't be able to > : guesstimate a valid configuration. > > But there are config entries. The pccard should be able to cope with > it. I don't see anything in the CIS that pccard would have trouble > with. braindead likely is a bit strong... > > : > Card decodes 4 address lines, limited 8/16 Bit I/O > > We can put this at any 16 byte boundary.... > > : It's impossible to tell from this > : whether the card does or doesn't look like a serial port; I'd say more > : likely not though (it has 16 I/O registers, rather than the 8 that a > : standard UART has). > > Most pccard that implement ISDN have special register sets. This card > doesn't sound familiar. I've only got this card, but as I don't run windows, I have little use for it, as it is. Would it help, if I shipped it to you ? Only I need to get it back, as it's Tele Danmark's property ... /Jesper -- Jesper Skriver, jesper(at)skriver(dot)dk - CCIE #5456 Work: Network manager @ AS3292 (Tele Danmark DataNetworks) Private: Geek @ AS2109 (A much smaller network ;-) One Unix to rule them all, One Resolver to find them, One IP to bring them all and in the zone to bind them. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Feb 13 5:19: 1 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from mail2.svr.pol.co.uk (mail2.svr.pol.co.uk [195.92.193.210]) by builder.freebsd.org (Postfix) with ESMTP id 734A941A5 for ; Sun, 13 Feb 2000 05:18:57 -0800 (PST) Received: from modem-34.false-clownfish.dialup.pol.co.uk ([62.137.10.34] helo=lungfish.freeserve.co.uk) by mail2.svr.pol.co.uk with esmtp (Exim 3.13 #0) id 12JyvS-0002UX-00; Sun, 13 Feb 2000 13:18:58 +0000 Received: (from scott@localhost) by lungfish.freeserve.co.uk (8.8.8/8.8.8) id PAA00957; Sat, 12 Feb 2000 15:15:58 GMT (envelope-from scott) Message-ID: <20000212151557.17516@lungfish.freeserve.co.uk> Date: Sat, 12 Feb 2000 15:15:57 +0000 From: Scott Mitchell To: Ken Hoelmer , freebsd-mobile@FreeBSD.ORG Subject: Re: no card in database for ""("") References: <38A561F1.E34382FD@prodigy.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.89i In-Reply-To: <38A561F1.E34382FD@prodigy.net>; from Ken Hoelmer on Sat, Feb 12, 2000 at 08:36:49AM -0500 X-Operating-System: FreeBSD 2.2.6-RELEASE i386 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Sat, Feb 12, 2000 at 08:36:49AM -0500, Ken Hoelmer wrote: > Newbie question: I am receiving the no card in database for ""("") > message after making the changes and recompiling FreeBSD 3.4 on my Dell > Latitude P3-500 with the Xircom RealPort Ethernet/Modem (32 bit). I take it by '32-bit' you mean this is the CardBus version of the RealPort? If so, I'm afraid you're out of luck. There is no FreeBSD driver for this card (yet; the 16-bit versions do work however) and in any case 3.4 doesn't support CardBus devices. Solutions? Get a 16bit Ethernet/Modem card (the Xircom ones work fine) or wait until 4.0 is released with CardBus support and the driver for your card is written... Scott -- =========================================================================== Scott Mitchell | PGP Key ID | "Eagles may soar, but weasels Cambridge, England | 0x54B171B9 | don't get sucked into jet engines" s.mitchell@computer.org | 0xAA775B8B | -- Anon To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Feb 13 12:34:51 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from pollux.nevada.edu (pollux.nevada.edu [131.216.1.217]) by builder.freebsd.org (Postfix) with ESMTP id BB8B7405E for ; Sun, 13 Feb 2000 12:34:48 -0800 (PST) Received: from localhost (slumos@localhost) by pollux.nevada.edu (8.8.8/8.8.8) with ESMTP id MAA05443 for ; Sun, 13 Feb 2000 12:34:58 -0800 (PST) X-Authentication-Warning: pollux.nevada.edu: slumos owned process doing -bs Date: Sun, 13 Feb 2000 12:34:57 -0800 (PST) From: Steve Lumos To: freebsd-mobile@freebsd.org Subject: OZ6832/ThinkPad i1452 fixed (was Re: OZ6832) In-Reply-To: <38A61DE6.3451C7E@ucsd.edu> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I downloaded the latest BIOS update from IBM and it works now. There is still no Cardbus option in the BIOS setup, so I guess they are probably trying to do something clever instead. I successfully booted Windows and then FreeBSD with a power-cycle in between and it continued working. I didn't try without power-cycling yet. Steve On Sat, 12 Feb 2000, Eric Hedstrom wrote: > What version of FreeBSD are you using? I got both 2.2.8 and 3.4-RELEASE (not > PAO) going this way on a Thinkpad 1410 (which has the same O2micro > controller). On the 1410 you hit F1 at boot time to get into BIOS setup, and > Cardbus enable/disable is an option on the "Advanced Settings" screen. > > Can you send in a dmesg of what it does find? > > Eric > > Steve Lumos wrote: > > > > On Sat, 12 Feb 2000, Eric Hedstrom wrote: > > > You need to turn off Cardbus support in the Thinkpad's BIOS setup. Also, if > > > you have Windows on the same machine, turn the computer off before booting > > > FreeBSD, rather than just rebooting from Windows. > > > > > > Eric > > > > I don't see any place in the BIOS setup or the "Notebook Manager" setup > > program under Windows where I can do that. Are there any other i Series > > users out there who have it working? > > > > Steve > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-mobile" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Feb 13 12:41:58 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from pollux.nevada.edu (pollux.nevada.edu [131.216.1.217]) by builder.freebsd.org (Postfix) with ESMTP id C4FBE46BC for ; Sun, 13 Feb 2000 12:41:56 -0800 (PST) Received: from localhost (slumos@localhost) by pollux.nevada.edu (8.8.8/8.8.8) with ESMTP id MAA06085 for ; Sun, 13 Feb 2000 12:42:06 -0800 (PST) X-Authentication-Warning: pollux.nevada.edu: slumos owned process doing -bs Date: Sun, 13 Feb 2000 12:42:06 -0800 (PST) From: Steve Lumos To: freebsd-mobile@freebsd.org Subject: APM questions Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hibernation works great for me, which is especially cool since it inexplicably stopped working in Windows several weeks ago. I'm wondering about a couple things: Should I be able to use the APM specific hotkeys (e.g. Fn-F12 to hibernate on my ThinkPad 1452)? I configured the Xstartup/Xreset files to chown /dev/apm and /dev/apmctl to the X user so they can run battery monitors, zzz, etc. Is this considered the right thing to do, or can it be a bad thing? Steve To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Feb 14 2: 7:30 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from milhouse.cnbinc.com (martin2.lnk.telstra.net [139.130.137.91]) by builder.freebsd.org (Postfix) with ESMTP id D43573D38 for ; Mon, 14 Feb 2000 02:07:17 -0800 (PST) Received: from bender (bender.cnbinc.com [203.38.182.20]) by milhouse.cnbinc.com (8.9.3/8.9.3) with SMTP id UAA30227 for ; Mon, 14 Feb 2000 20:34:44 +1030 (CST) (envelope-from diskiller@cnbinc.com) Message-ID: <002201bf76d2$e923a3e0$14b626cb@bender.cnbinc.com> From: "Martin Minkus" To: Subject: Tecra 4000 Date: Mon, 14 Feb 2000 20:34:40 +1030 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_001F_01BF772A.EB026E00" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2615.200 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2615.200 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org This is a multi-part message in MIME format. ------=_NextPart_000_001F_01BF772A.EB026E00 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I'm looking at a secondhand Toshiba Tecra 4000 and am considering = purchasing it. I can't boot FBSD on it. (It refuses to boot of the CD, it just ignores = it, and continues to boot Win95). It does boot the Windows NT4 and NT5 (2000) cds, so i'm assuming it's = BIOS is a bit picky and doesn't like my FBSD 3.3 and 3.4 boot cd's. = (works on my old compaq laptop fine) It doesn't have a disk drive either, so that option is out too. So i = can't get FBSD onto it. Now, my question is, DOES Fbsd work on this laptop, does it work WELL, = and are there any known 'issues' or 'problems', etc. The toshiba laptops = are some of the best compaitibility-wise (i had a toshiba tecra 570 or = something a few years back, and FBSD ran wonderfully!!!. Since then, i = got a Compaq and have regretted it since, having wierd problems with it = always. Tho PAO came to the rescue). So, i am assuming the Tecra 4000 will work great, i just need to buy an = external fdd so i can install FBSD on it. It has an internal modem, = which i assume is a WinModem, and is the only thing that won't work. It = also has the docking station, and i'm assuming that will all work ? = (USB, Ethernet, etc). Tho i'll mostly use my PCCARD WaveLAN and ethernet = card from the compaq/old tecra that i've always used under FBSD. Please reply to me personally, as i'm not subscribed to this particular = mailing list. If i hear good things about it, i'll buy it, and buy it an fdd, and get = FBSD onto it :). This is a celeron 350 i believe, 64mb ram, and 6.1gb = hdd. (i can't even check the processor, Win95a says its a Pentium Pro, = and thats it? lol) Thankyou martin. -- diskiller@cnbinc.com Linux/FreeBSD hacker Please use PGP: http://www.diskiller.net/pgp.html ------=_NextPart_000_001F_01BF772A.EB026E00 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
I'm looking at a secondhand Toshiba = Tecra 4000 and=20 am considering purchasing it.
 
I can't boot FBSD on it. (It refuses to = boot of the=20 CD, it just ignores it, and continues to boot Win95).
It does boot the Windows NT4 and NT5 = (2000) cds, so=20 i'm assuming it's BIOS is a bit picky and doesn't like my FBSD 3.3 and = 3.4 boot=20 cd's. (works on my old compaq laptop fine)
 
It doesn't have a disk drive either, so = that option=20 is out too. So i can't get FBSD onto it.
 
 
Now, my question is, DOES Fbsd work on = this laptop,=20 does it work WELL, and are there any known 'issues' or 'problems', etc. = The=20 toshiba laptops are some of the best compaitibility-wise (i had a = toshiba tecra=20 570 or something a few years back, and FBSD ran wonderfully!!!. Since = then, i=20 got a Compaq and have regretted it since, having wierd problems with it = always.=20 Tho PAO came to the rescue).
 
So, i am assuming the Tecra 4000 will = work great, i=20 just need to buy an external fdd so i can install FBSD on it. It has an = internal=20 modem, which i assume is a WinModem, and is the only thing that won't = work. It=20 also has the docking station, and i'm assuming that will all work ? = (USB,=20 Ethernet, etc). Tho i'll mostly use my PCCARD WaveLAN and ethernet card = from the=20 compaq/old tecra that i've always used under FBSD.
 
Please reply to me personally, as i'm = not=20 subscribed to this particular mailing list.
 
If i hear good things about it, i'll = buy it, and=20 buy it an fdd, and get FBSD onto it :). This is a celeron 350 i believe, = 64mb=20 ram, and 6.1gb hdd. (i can't even check the processor, Win95a says its a = Pentium=20 Pro, and thats it? lol)
 
Thankyou
martin.
 
--
diskiller@cnbinc.com
Linux/Fr= eeBSD=20 hacker
 
Please use PGP: http://www.diskiller.net/pgp.h= tml
------=_NextPart_000_001F_01BF772A.EB026E00-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Feb 14 2:22:24 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from milhouse.cnbinc.com (martin2.lnk.telstra.net [139.130.137.91]) by builder.freebsd.org (Postfix) with ESMTP id 567C23E83 for ; Mon, 14 Feb 2000 02:22:20 -0800 (PST) Received: from bender (bender.cnbinc.com [203.38.182.20]) by milhouse.cnbinc.com (8.9.3/8.9.3) with SMTP id UAA30244 for ; Mon, 14 Feb 2000 20:49:48 +1030 (CST) (envelope-from diskiller@cnbinc.com) Message-ID: <002b01bf76d5$034aab40$14b626cb@bender.cnbinc.com> From: "Martin Minkus" To: Subject: Sorry, 8000 not 4000 Date: Mon, 14 Feb 2000 20:49:44 +1030 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0028_01BF772D.05B75D80" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2615.200 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2615.200 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org This is a multi-part message in MIME format. ------=_NextPart_000_0028_01BF772D.05B75D80 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Sorry, thats a Tecra 8000 not a Tecra 4000. My mistake. -- diskiller@cnbinc.com Linux/FreeBSD hacker Please use PGP: http://www.diskiller.net/pgp.html ------=_NextPart_000_0028_01BF772D.05B75D80 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Sorry, thats a Tecra 8000 not a Tecra=20 4000.
 
My mistake.
 
--
diskiller@cnbinc.com
Linux/Fr= eeBSD=20 hacker
 
Please use PGP: http://www.diskiller.net/pgp.h= tml
------=_NextPart_000_0028_01BF772D.05B75D80-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Feb 14 3: 9:29 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from gorilla.mchh.siemens.de (gorilla.mchh.siemens.de [194.138.158.18]) by builder.freebsd.org (Postfix) with ESMTP id 58D1F3D2C for ; Mon, 14 Feb 2000 03:09:18 -0800 (PST) Received: from blues.mchh.siemens.de (mail3.mchh.siemens.de [194.138.158.227] (may be forged)) by gorilla.mchh.siemens.de (8.9.3/8.9.3) with ESMTP id MAA28689; Mon, 14 Feb 2000 12:08:37 +0100 (MET) Received: from mchh246e.demchh201e.icn.siemens.de ([218.1.68.146]) by blues.mchh.siemens.de (8.9.1/8.9.1) with ESMTP id MAA06427; Mon, 14 Feb 2000 12:06:59 +0100 (MET) Received: by MCHH246E with Internet Mail Service (5.5.2448.0) id <1RB3NPWS>; Mon, 14 Feb 2000 12:09:57 +0100 Message-ID: <67E0BE167008D31185F60008C7289DA009C192@mchh218e.demchh201e.oen.siemens.de> From: Reifenberger Michael To: "'Martin Minkus'" Cc: "'freebsd-mobile@FreeBSD.ORG'" Subject: AW: Tecra 4000 Date: Mon, 14 Feb 2000 12:09:54 +0100 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2448.0) Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, I'm running FreeBSD-current successfully on the Tecra8000. The only issues are sporadic resume-faulures after suspend/resume = (after pressing the power-on button for resume the screen stays black and one = has to push the reset-button. Then a "resume failure" occures on the screen = and a normal startup occures) and pccard cant use the (from the BIOS = choosen)=20 shared IRQ 11 for insert/eject notification. It get assigned an unused = IRQ but doesn't seem to work -> so poll mode only. Besides that its stable and fast, X works too. Bye/2 ------ Michael Reifenberger - IT, UNIX, R/3-Basis Work: Michael.Reifenberger@plaut.de Proj: Michael.Reifenberger.gp@icn.siemens.de Pers: Michael@Reifenberger.com Webspace: http://www.reifenberger.com > -----Urspr=FCngliche Nachricht----- > Von: Martin Minkus [SMTP:diskiller@cnbinc.com] > Gesendet am: Montag, 14. Februar 2000 11:05 > An: freebsd-mobile@FreeBSD.ORG > Betreff: Tecra 4000 >=20 > I'm looking at a secondhand Toshiba Tecra 4000 and am considering > purchasing it. > =20 > I can't boot FBSD on it. (It refuses to boot of the CD, it just = ignores > it, and continues to boot Win95). > It does boot the Windows NT4 and NT5 (2000) cds, so i'm assuming it's = BIOS > is a bit picky and doesn't like my FBSD 3.3 and 3.4 boot cd's. (works = on > my old compaq laptop fine) > =20 > It doesn't have a disk drive either, so that option is out too. So i = can't > get FBSD onto it. > =20 > =20 > Now, my question is, DOES Fbsd work on this laptop, does it work = WELL, and > are there any known 'issues' or 'problems', etc. The toshiba laptops = are > some of the best compaitibility-wise (i had a toshiba tecra 570 or > something a few years back, and FBSD ran wonderfully!!!. Since then, = i got > a Compaq and have regretted it since, having wierd problems with it > always. Tho PAO came to the rescue). > =20 > So, i am assuming the Tecra 4000 will work great, i just need to buy = an > external fdd so i can install FBSD on it. It has an internal modem, = which > i assume is a WinModem, and is the only thing that won't work. It = also has > the docking station, and i'm assuming that will all work ? (USB, = Ethernet, > etc). Tho i'll mostly use my PCCARD WaveLAN and ethernet card from = the > compaq/old tecra that i've always used under FBSD. > =20 > Please reply to me personally, as i'm not subscribed to this = particular > mailing list. > =20 > If i hear good things about it, i'll buy it, and buy it an fdd, and = get > FBSD onto it :). This is a celeron 350 i believe, 64mb ram, and 6.1gb = hdd. > (i can't even check the processor, Win95a says its a Pentium Pro, and > thats it? lol) > =20 > Thankyou > martin. > =20 > -- > diskiller@cnbinc.com > Linux/FreeBSD hacker > =20 > Please use PGP: To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Feb 14 5:14:28 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from moo.sysabend.org (moo.sysabend.org [209.0.55.68]) by builder.freebsd.org (Postfix) with ESMTP id 2EA3D3E67 for ; Mon, 14 Feb 2000 05:14:25 -0800 (PST) Received: by moo.sysabend.org (Postfix, from userid 1004) id 60DCA755E; Mon, 14 Feb 2000 05:18:02 -0800 (PST) Received: from localhost (localhost [127.0.0.1]) by moo.sysabend.org (Postfix) with ESMTP id 4E5791D8A for ; Mon, 14 Feb 2000 05:18:02 -0800 (PST) Date: Mon, 14 Feb 2000 05:18:02 -0800 (PST) From: Jamie Bowden To: mobile@FreeBSD.org Subject: MagicMedia 256ZX and XFree86 Message-ID: Approved: yep X-representing: Only myself. X-badge: We don't need no stinking badges. X-obligatory-profanity: Fuck X-moo: Moo. MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Several people asked, so I'll post the results. Thanks to Bill Paul for pointing me the direction I needed on this, BTW. Yes, the chip works. In order to do so you have to edit the device id for the nm2200 entry (MagicMedia 256AV) to match the 256ZX's id. I've already deleted the XFree source tree or I'd post what I did. A more effective solution would be to add a 2300 entry, treat it like a 2200, and submit the diffs to the xfree86 project, but I'm not a programmer, so I cheated. Here are the relevant portions of pciconf -l: vga0@pci1:0:0: class=0x030000 card=0x008b1028 chip=0x000610c8 rev=0x00 hdr=0x00 none0@pci1:0:1: class=0x040100 card=0x008b1028 chip=0x800610c8 rev=0x00 hdr=0x00 The 2200 device id was changed from 0x0005 to 0x0006. The second entry above is the integrated sound hardware. Jamie Bowden -- "Of course, that's sort of like asking how other than Marketing, Microsoft is different from any other software company..." Kenneth G. Cavness To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Feb 14 11: 8:35 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from jade.chc-chimes.com (jade.chc-chimes.com [216.28.46.6]) by builder.freebsd.org (Postfix) with ESMTP id 953D64AF1 for ; Mon, 14 Feb 2000 11:08:24 -0800 (PST) Received: by jade.chc-chimes.com (Postfix, from userid 1001) id 22EE41C4A; Mon, 14 Feb 2000 14:08:38 -0500 (EST) Date: Mon, 14 Feb 2000 14:08:38 -0500 From: Bill Fumerola To: Jamie Bowden Cc: mobile@FreeBSD.org Subject: Re: MagicMedia 256ZX and XFree86 Message-ID: <20000214140838.Z92177@jade.chc-chimes.com> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0i In-Reply-To: ; from ragnar@sysabend.org on Mon, Feb 14, 2000 at 05:18:02AM -0800 X-Operating-System: FreeBSD 3.2-RELEASE i386 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Mon, Feb 14, 2000 at 05:18:02AM -0800, Jamie Bowden wrote: > vga0@pci1:0:0: class=0x030000 card=0x008b1028 chip=0x000610c8 rev=0x00 > hdr=0x00 > none0@pci1:0:1: class=0x040100 card=0x008b1028 chip=0x800610c8 rev=0x00 > hdr=0x00 > > The 2200 device id was changed from 0x0005 to 0x0006. The second entry > above is the integrated sound hardware. Which does work with pcm (!!!). -- Bill Fumerola - Network Architect Computer Horizons Corp - CVM e-mail: billf@chc-chimes.com / billf@FreeBSD.org Office: 800-252-2421 x128 / Cell: 248-761-7272 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Feb 14 11:35:52 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from moo.sysabend.org (moo.sysabend.org [209.0.55.68]) by builder.freebsd.org (Postfix) with ESMTP id 359C34DC5 for ; Mon, 14 Feb 2000 11:35:50 -0800 (PST) Received: by moo.sysabend.org (Postfix, from userid 1004) id 93C1F7560; Mon, 14 Feb 2000 11:39:31 -0800 (PST) Received: from localhost (localhost [127.0.0.1]) by moo.sysabend.org (Postfix) with ESMTP id 817C51D8D; Mon, 14 Feb 2000 11:39:31 -0800 (PST) Date: Mon, 14 Feb 2000 11:39:31 -0800 (PST) From: Jamie Bowden To: Bill Fumerola Cc: mobile@FreeBSD.org Subject: Re: MagicMedia 256ZX and XFree86 In-Reply-To: <20000214140838.Z92177@jade.chc-chimes.com> Message-ID: Approved: yep X-representing: Only myself. X-badge: We don't need no stinking badges. X-obligatory-profanity: Fuck X-moo: Moo. MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Mon, 14 Feb 2000, Bill Fumerola wrote: :On Mon, Feb 14, 2000 at 05:18:02AM -0800, Jamie Bowden wrote: : :> vga0@pci1:0:0: class=0x030000 card=0x008b1028 chip=0x000610c8 rev=0x00 :> hdr=0x00 :> none0@pci1:0:1: class=0x040100 card=0x008b1028 chip=0x800610c8 rev=0x00 :> hdr=0x00 :> :> The 2200 device id was changed from 0x0005 to 0x0006. The second entry :> above is the integrated sound hardware. : :Which does work with pcm (!!!). I already have sound support? I hadn't bothered to compile sound into the kernel since I thought the chip wasn't supported under anything but -current. Jamie Bowden -- "Of course, that's sort of like asking how other than Marketing, Microsoft is different from any other software company..." Kenneth G. Cavness To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Feb 14 11:40:20 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from jade.chc-chimes.com (jade.chc-chimes.com [216.28.46.6]) by builder.freebsd.org (Postfix) with ESMTP id B385B4D2F for ; Mon, 14 Feb 2000 11:40:17 -0800 (PST) Received: by jade.chc-chimes.com (Postfix, from userid 1001) id 83F7A1C4A; Mon, 14 Feb 2000 14:40:35 -0500 (EST) Date: Mon, 14 Feb 2000 14:40:35 -0500 From: Bill Fumerola To: Jamie Bowden Cc: mobile@FreeBSD.org Subject: Re: MagicMedia 256ZX and XFree86 Message-ID: <20000214144035.F92177@jade.chc-chimes.com> References: <20000214140838.Z92177@jade.chc-chimes.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0i In-Reply-To: ; from ragnar@sysabend.org on Mon, Feb 14, 2000 at 11:39:31AM -0800 X-Operating-System: FreeBSD 3.2-RELEASE i386 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Mon, Feb 14, 2000 at 11:39:31AM -0800, Jamie Bowden wrote: > :> The 2200 device id was changed from 0x0005 to 0x0006. The second entry > :> above is the integrated sound hardware. > : > :Which does work with pcm (!!!). > > I already have sound support? I hadn't bothered to compile sound into the > kernel since I thought the chip wasn't supported under anything but > -current. Sorry, I'm of the mentality that everything is -CURRENT. :-> BTW - I wasn't saying you said anything wrong, I was just displaying my excitement that my laptop had sound. -- Bill Fumerola - Network Architect Computer Horizons Corp - CVM e-mail: billf@chc-chimes.com / billf@FreeBSD.org Office: 800-252-2421 x128 / Cell: 248-761-7272 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Feb 14 18: 7:55 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from tasogare.imasy.or.jp (tasogare.imasy.or.jp [202.227.24.5]) by builder.freebsd.org (Postfix) with ESMTP id 04DAE3E75 for ; Mon, 14 Feb 2000 18:07:53 -0800 (PST) Received: from localhost (isdn30.imasy.or.jp [202.227.24.222]) by tasogare.imasy.or.jp (8.9.3+3.2W/3.7W-tasogare/smtpfeed 1.01) with ESMTP id LAA06403; Tue, 15 Feb 2000 11:08:06 +0900 (JST) (envelope-from iwasaki@jp.FreeBSD.org) Message-Id: <200002150208.LAA06403@tasogare.imasy.or.jp> To: slumos@nevada.edu Cc: freebsd-mobile@freebsd.org Subject: Re: APM questions In-Reply-To: Your message of "Sun, 13 Feb 2000 12:42:06 -0800 (PST)" References: X-Mailer: Mew version 1.93 on Emacs 19.34 / Mule 2.3 (SUETSUMUHANA) Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Date: Tue, 15 Feb 2000 11:07:53 +0900 From: Mitsuru IWASAKI X-Dispatcher: imput version 980905(IM100) Lines: 14 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, sorry for late reply. > Should I be able to use the APM specific hotkeys (e.g. Fn-F12 to hibernate > on my ThinkPad 1452)? Hotkeys works fine for me configuring BIOS setup. # Actually, my laptop is not ThinkPad but BIOS seems compatible with one # of the ThinkPad series. > I configured the Xstartup/Xreset files to chown /dev/apm and /dev/apmctl > to the X user so they can run battery monitors, zzz, etc. Is this > considered the right thing to do, or can it be a bad thing? I recommend adding users as operator into /etc/group. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Feb 14 19:20:10 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from rover.village.org (rover.village.org [204.144.255.49]) by builder.freebsd.org (Postfix) with ESMTP id 9AFEF427F for ; Mon, 14 Feb 2000 19:20:06 -0800 (PST) Received: from harmony.village.org (harmony.village.org [10.0.0.6]) by rover.village.org (8.9.3/8.9.3) with ESMTP id UAA66046; Mon, 14 Feb 2000 20:20:25 -0700 (MST) (envelope-from imp@harmony.village.org) Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id UAA61998; Mon, 14 Feb 2000 20:20:34 -0700 (MST) Message-Id: <200002150320.UAA61998@harmony.village.org> To: Mitsuru IWASAKI Subject: Re: APM questions Cc: slumos@nevada.edu, freebsd-mobile@FreeBSD.ORG In-reply-to: Your message of "Tue, 15 Feb 2000 11:07:53 +0900." <200002150208.LAA06403@tasogare.imasy.or.jp> References: <200002150208.LAA06403@tasogare.imasy.or.jp> Date: Mon, 14 Feb 2000 20:20:34 -0700 From: Warner Losh Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In message <200002150208.LAA06403@tasogare.imasy.or.jp> Mitsuru IWASAKI writes: : I recommend adding users as operator into /etc/group. I would like to second this as well. It is a good thing. Alternatively, one can chmod /dev/apm* to 777 so that anybody can do apm things. On a single user machine that has only one user, this is likely a good thing. If the thugs break into my laptop, then I think that if they do apm things I will notice and I will take corrective actions. It would also cut them off from doing further damage :-) Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Feb 14 19:34:40 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from orion.ac.hmc.edu (Orion.AC.HMC.Edu [134.173.32.20]) by builder.freebsd.org (Postfix) with ESMTP id 367933E64 for ; Mon, 14 Feb 2000 19:34:38 -0800 (PST) Received: (from brdavis@localhost) by orion.ac.hmc.edu (8.8.8/8.8.8) id TAA16967; Mon, 14 Feb 2000 19:34:19 -0800 (PST) Date: Mon, 14 Feb 2000 19:34:19 -0800 From: Brooks Davis To: Warner Losh Cc: Mitsuru IWASAKI , slumos@nevada.edu, freebsd-mobile@FreeBSD.ORG Subject: Re: APM questions Message-ID: <20000214193419.A14346@orion.ac.hmc.edu> References: <200002150208.LAA06403@tasogare.imasy.or.jp> <200002150208.LAA06403@tasogare.imasy.or.jp> <200002150320.UAA61998@harmony.village.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre4i In-Reply-To: <200002150320.UAA61998@harmony.village.org>; from imp@village.org on Mon, Feb 14, 2000 at 08:20:34PM -0700 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Mon, Feb 14, 2000 at 08:20:34PM -0700, Warner Losh wrote: > In message <200002150208.LAA06403@tasogare.imasy.or.jp> Mitsuru IWASAKI writes: > : I recommend adding users as operator into /etc/group. > > I would like to second this as well. It is a good thing. > Alternatively, one can chmod /dev/apm* to 777 so that anybody can do > apm things. On a single user machine that has only one user, this is > likely a good thing. If the thugs break into my laptop, then I think > that if they do apm things I will notice and I will take corrective > actions. It would also cut them off from doing further damage :-) I've taken to creating an apm group and adding the users to it as needed. That way I know exactly what permissions I'm granting (and I avoid granting read access to all drives ;-). -- Brooks -- Any statement of the form "X is the one, true Y" is FALSE. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue Feb 15 1:51:46 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from polaris.we.lc.ehu.es (polaris.we.lc.ehu.es [158.227.6.43]) by builder.freebsd.org (Postfix) with ESMTP id 3A6A64268 for ; Tue, 15 Feb 2000 01:51:19 -0800 (PST) Received: from we.lc.ehu.es (v-ger [158.227.6.179]) by polaris.we.lc.ehu.es (8.9.1/8.9.1) with ESMTP id KAA16299 for ; Tue, 15 Feb 2000 10:51:34 +0100 (MET) Message-ID: <38A921A3.2DFAC51D@we.lc.ehu.es> Date: Tue, 15 Feb 2000 10:51:31 +0100 From: "Jose M. Alcaide" Organization: Universidad del =?iso-8859-1?Q?Pa=EDs?= Vasco - Dpto. de Electricidad y =?iso-8859-1?Q?Electr=F3nica?= X-Mailer: Mozilla 4.7 [en] (X11; U; FreeBSD 3.4-RELEASE i386) X-Accept-Language: es-ES, es, en-US, en MIME-Version: 1.0 To: freebsd-mobile@FreeBSD.org Subject: wondering about apm_cpu_{idle,busy}() in sys/i386/apm/apm.c Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org [I posted this question to -hackers one week ago; since I did not get any answers I am trying again in -mobile :-)] Hello, I am doing some experiments with my new laptop and APM, so I carefully read the apm(4) source (sys/i386/apm/apm.c), and I found the functions apm_cpu_idle() and apm_cpu_busy(). I understand the double CPU halting issue. However, I wonder about where are these two functions invoked from: jose@v-ger[~]$ find /usr/src/sys -name "*.[chsS]" | xargs fgrep apm_cpu_idle /usr/src/sys/i386/apm/apm.c:apm_cpu_idle(void) /usr/src/sys/i386/include/apm_bios.h:void apm_cpu_idle(void); And the same happens with apm_cpu_busy(). Are these functions actually used in the kernel? What did I miss? Cheers, -- JMA ----------------------------------------------------------------------- José Mª Alcaide | mailto:jose@we.lc.ehu.es Universidad del País Vasco | mailto:jmas@FreeBSD.org Dpto. de Electricidad y Electrónica | http://www.we.lc.ehu.es/~jose Facultad de Ciencias - Campus de Lejona | Tel.: +34-946012479 48940 Lejona (Vizcaya) - SPAIN | Fax: +34-946013071 ----------------------------------------------------------------------- "Beware of Programmers who carry screwdrivers" -- Leonard Brandwein To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue Feb 15 7:53: 3 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from icx.net (icx.net [206.96.250.2]) by builder.freebsd.org (Postfix) with ESMTP id C9E674484 for ; Tue, 15 Feb 2000 07:52:52 -0800 (PST) Received: from gail (pm18aq.icx.net [216.82.8.154]) by icx.net (IDG-2.7/1.3nr) with SMTP id KAA23812 for ; Tue, 15 Feb 2000 10:53:01 -0500 (EST) Message-Id: <3.0.6.32.20000215105501.007a1100@mailhub.icx.net> X-Sender: gmpicket@mailhub.icx.net X-Mailer: QUALCOMM Windows Eudora Light Version 3.0.6 (32) Date: Tue, 15 Feb 2000 10:55:01 -0500 To: freebsd-mobile@FreeBSD.org From: "Gail M. Pickett" Subject: XFree86 and Intel 810 chipset Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I just bought a desktop computer that has an Intel 810 chipset and I am having trouble setting up XFree86. I updated to the newly released version 3.3.6 which says it supports the Intel 810 chipset (video driver), but I have been unable to make the thing fly. The info from XFree86.org says that it includes support, but it is not enabled by default as it needs kernel module. What does that mean? In the configuration notes (for the 810 chipset) they say that it is necessary to install the "agpgart.o" module which accompanies the server. I have been unable to find this file. When I find it, how do I compile it? Thanks. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue Feb 15 8:39:48 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from histidine.utmb.edu (histidine.utmb.edu [129.109.59.80]) by builder.freebsd.org (Postfix) with ESMTP id 0C4A24E84 for ; Tue, 15 Feb 2000 08:30:27 -0800 (PST) Received: (from bdodson@localhost) by histidine.utmb.edu (8.9.3/8.9.3) id KAA55485; Tue, 15 Feb 2000 10:29:40 -0600 (CST) (envelope-from bdodson) Date: Tue, 15 Feb 2000 10:29:40 -0600 (CST) Message-Id: <200002151629.KAA55485@histidine.utmb.edu> From: "M. L. Dodson" MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit To: "Gail M. Pickett" Cc: freebsd-mobile@FreeBSD.ORG Subject: XFree86 and Intel 810 chipset In-Reply-To: <3.0.6.32.20000215105501.007a1100@mailhub.icx.net> References: <3.0.6.32.20000215105501.007a1100@mailhub.icx.net> X-Mailer: VM 6.34 under 19.16 "Lille" XEmacs Lucid Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Gail M. Pickett writes: > I just bought a desktop computer that has an Intel 810 chipset and I am > having trouble setting up XFree86. I updated to the newly released version > 3.3.6 which says it supports the Intel 810 chipset (video driver), but I > have been unable to make the thing fly. > > The info from XFree86.org says that it includes support, but it is not > enabled by default as it needs kernel module. What does that mean? > > In the configuration notes (for the 810 chipset) they say that it is > necessary to install the "agpgart.o" module which accompanies the server. > I have been unable to find this file. When I find it, how do I compile it? > I believe that agpgart.o is a Linux file which sets aside memory for the 810 integrated video controller. You will have to port this to FBSD, I believe, and you will have to get the XFree86 source to get something to port. Obviously, if you got the installation to go, syscons is working. If there a BIOS option to turn off the integrated chip video, you might be able to bring X up on a PCI video card (performance hit?). I looked into an 810 system for home and decided it was too much hassle for the money saved. Is anyone working on a FBSD version of agpgart.o (as a kernel module, perhaps)? > Thanks. > -- M. L. Dodson bdodson@scms.utmb.edu 409-772-2178 FAX: 409-772-1790 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue Feb 15 9:16:59 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from polaris.we.lc.ehu.es (polaris.we.lc.ehu.es [158.227.6.43]) by builder.freebsd.org (Postfix) with ESMTP id 0E5514B45 for ; Tue, 15 Feb 2000 09:13:39 -0800 (PST) Received: from we.lc.ehu.es (v-ger [158.227.6.179]) by polaris.we.lc.ehu.es (8.9.1/8.9.1) with ESMTP id SAA18849; Tue, 15 Feb 2000 18:13:06 +0100 (MET) Message-ID: <38A98920.467B354D@we.lc.ehu.es> Date: Tue, 15 Feb 2000 18:13:04 +0100 From: "Jose M. Alcaide" Organization: Universidad del =?iso-8859-1?Q?Pa=EDs?= Vasco - Dpto. de Electricidad y =?iso-8859-1?Q?Electr=F3nica?= X-Mailer: Mozilla 4.7 [en] (X11; U; FreeBSD 3.4-RELEASE i386) X-Accept-Language: es-ES, es, en-US, en MIME-Version: 1.0 To: "Gail M. Pickett" Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: XFree86 and Intel 810 chipset References: <3.0.6.32.20000215105501.007a1100@mailhub.icx.net> Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org "Gail M. Pickett" wrote: > > I just bought a desktop computer that has an Intel 810 chipset and I am > having trouble setting up XFree86. I updated to the newly released version > 3.3.6 which says it supports the Intel 810 chipset (video driver), but I > have been unable to make the thing fly. > > The info from XFree86.org says that it includes support, but it is not > enabled by default as it needs kernel module. What does that mean? > > In the configuration notes (for the 810 chipset) they say that it is > necessary to install the "agpgart.o" module which accompanies the server. > I have been unable to find this file. When I find it, how do I compile it? > You should have posted your question to -hardware instead of -mobile... You are out of luck. The XFree86 driver for the i810's graphics controller needs a kernel module (agpart.o). The sources for this module are included with the XFree86 source distribution, but that kernel module is Linux-specific. In other words: XFree86 3.3.6 does not support the i810's graphics controller under FreeBSD. I don't know whether someone is porting that kernel module (if that is possible at all) to FreeBSD. -- JMA ----------------------------------------------------------------------- José Mª Alcaide | mailto:jose@we.lc.ehu.es Universidad del País Vasco | mailto:jmas@FreeBSD.org Dpto. de Electricidad y Electrónica | http://www.we.lc.ehu.es/~jose Facultad de Ciencias - Campus de Lejona | Tel.: +34-946012479 48940 Lejona (Vizcaya) - SPAIN | Fax: +34-946013071 ----------------------------------------------------------------------- "Beware of Programmers who carry screwdrivers" -- Leonard Brandwein To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue Feb 15 9:19:39 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from post.it.helsinki.fi (post.it.helsinki.fi [128.214.205.24]) by builder.freebsd.org (Postfix) with ESMTP id EB9F843A9 for ; Tue, 15 Feb 2000 09:16:56 -0800 (PST) Received: from mursu.pesa.fi (root@husaari.in.helsinki.fi [128.214.204.69]) by post.it.helsinki.fi (8.9.3/8.9.3-SPAMmers-sod-off) with ESMTP id TAA06625 for ; Tue, 15 Feb 2000 19:17:20 +0200 (EET) Received: (from poku@localhost) by mursu.pesa.fi (8.9.3/8.9.3) id TAA01814; Tue, 15 Feb 2000 19:04:28 +0200 To: freebsd-mobile@FreeBSD.ORG Subject: Adaptec SlimSCSI From: Jussi Reissell Date: 15 Feb 2000 19:04:28 +0200 Message-ID: Lines: 64 X-Mailer: Gnus v5.5/Emacs 20.3 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, the mail archives seem to be down so I'll just have to bugger you mobile BSDers ... I recently installed 3.4-20000128-STABLE on my laptop and am now tinkering with pc cards. Haven't got around to experimenting with PAO. So far, I've only been working with what the basic install gives me. I already got my nic working alright so things are going pretty good. The adaptec SlimSCSI (1460A) is giving me some slight headaches, though. When I insert the card, I get a Card inserted message but right after that pccardd moans: driver allocation failed for Adaptec, Inc. My setup WRT the Adaptec card is: Kernel conf: =========== controller card0 device pcic0 at card? device pcic1 at card? controller scbus0 #base SCSI code device da0 #SCSI direct access devices (aka disks) device cd0 #SCSI CD-ROMs device pass0 #CAM passthrough driver # I'm assuming the SlimSCSI needs the aic driver. I'm not sure about # the rest of the line either. controller aic0 at isa? port ? cam irq ? /etc/pccard.conf: ================ io 0x240-0x3ff irq 6 8 10 11 13 15 memory 0xd4000 96k # Adaptec SlimSCSI (also included with Sony CD-ROM players) card "Adaptec, Inc." "APA-1460 SCSI Host Adapter" config 0x9 "aic0" ? insert echo Adaptec Slim SCSI inserted remove echo Adaptec Slim SCSI removed edited dmesg: ============ pcic0: rev 0xe2 int a irq 255 on pci0.4.0 ... ep0 not found at 0x300 [the ep driver works fine, though] ... aic0 not found ... PC-Card Cirrus Logic PD672X (5 mem & 2 I/O windows) pcic: controller irq 9 Initializing PC-card drivers: ep sio So, what could be wrong? The "config" line for the SlimSCSI looks like a possible suspect as do the io/irq values. At the moment I have no way of checking them, so a push in the right direction is very much appreciated. Jussi To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue Feb 15 10:26:16 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from moek.pir.net (moek.pir.net [209.192.237.190]) by builder.freebsd.org (Postfix) with ESMTP id 808D75204 for ; Tue, 15 Feb 2000 10:16:57 -0800 (PST) Received: from pir by moek.pir.net with local (Exim) id 12KmXC-0001a7-00 for freebsd-mobile@FreeBSD.ORG; Tue, 15 Feb 2000 13:17:14 -0500 Date: Tue, 15 Feb 2000 13:17:13 -0500 From: Peter Radcliffe To: freebsd-mobile@FreeBSD.ORG Subject: Re: Adaptec SlimSCSI Message-ID: <20000215131713.A5365@pir.net> Mail-Followup-To: freebsd-mobile@FreeBSD.ORG References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: ; from reissell@cc.helsinki.fi on Tue, Feb 15, 2000 at 07:04:28PM +0200 X-fish: < Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Jussi Reissell probably said: > I recently installed 3.4-20000128-STABLE on my laptop and am now > I already got my nic working alright so things are going pretty > good. The adaptec SlimSCSI (1460A) is giving me some slight headaches, > though. > Initializing PC-card drivers: ep sio This means aic isn't getting set up as a pcmcia driver. Unless you see aic listed there, it will never work. > So, what could be wrong? The "config" line for the SlimSCSI looks like > a possible suspect as do the io/irq values. At the moment I have no > way of checking them, so a push in the right direction is very much > appreciated. To my knowledge the patches for cam-ised aic are not in STABLE yet (I could be wrong here). They definately are in PAO for 3.4, however. I'm using that with my 1460B with no problems. P. -- pir pir@pir.net pir@net.tufts.edu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue Feb 15 11:52:47 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from mass.cdrom.com (castles536.castles.com [208.214.165.100]) by builder.freebsd.org (Postfix) with ESMTP id 1480A56D9 for ; Tue, 15 Feb 2000 10:57:47 -0800 (PST) Received: from mass.cdrom.com (localhost [127.0.0.1]) by mass.cdrom.com (8.9.3/8.9.3) with ESMTP id LAA02215; Tue, 15 Feb 2000 11:09:22 -0800 (PST) (envelope-from msmith@mass.cdrom.com) Message-Id: <200002151909.LAA02215@mass.cdrom.com> X-Mailer: exmh version 2.1.1 10/15/1999 To: "Gail M. Pickett" Cc: freebsd-mobile@FreeBSD.org Subject: Re: XFree86 and Intel 810 chipset In-reply-to: Your message of "Tue, 15 Feb 2000 10:55:01 EST." <3.0.6.32.20000215105501.007a1100@mailhub.icx.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Tue, 15 Feb 2000 11:09:22 -0800 From: Mike Smith Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > I just bought a desktop computer that has an Intel 810 chipset and I am > having trouble setting up XFree86. I updated to the newly released version > 3.3.6 which says it supports the Intel 810 chipset (video driver), but I > have been unable to make the thing fly. > > The info from XFree86.org says that it includes support, but it is not > enabled by default as it needs kernel module. What does that mean? > > In the configuration notes (for the 810 chipset) they say that it is > necessary to install the "agpgart.o" module which accompanies the server. > I have been unable to find this file. When I find it, how do I compile it? It only works on Linux. We need proper AGP support, one of the things that's been on my to-do list for some time now. If there's an aspiring chipset hacker out there looking for a well-defined task to undertake, please let me know and I can get you pointed in the right directions. -- \\ Give a man a fish, and you feed him for a day. \\ Mike Smith \\ Tell him he should learn how to fish himself, \\ msmith@freebsd.org \\ and he'll hate you for a lifetime. \\ msmith@cdrom.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue Feb 15 11:52:58 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from mail.nyct.net (bsd4.nyct.net [204.141.86.6]) by builder.freebsd.org (Postfix) with ESMTP id 71B1354E7 for ; Tue, 15 Feb 2000 11:04:07 -0800 (PST) Received: from bsd1.nyct.net (efutch@bsd1.nyct.net [204.141.86.3]) by mail.nyct.net (8.8.8/8.8.7) with ESMTP id OAA24387; Tue, 15 Feb 2000 14:04:26 -0500 (EST) (envelope-from efutch@nyct.net) Date: Tue, 15 Feb 2000 14:04:25 -0500 (EST) From: "Eric D. Futch" To: Jussi Reissell Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: Adaptec SlimSCSI In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On 15 Feb 2000, Jussi Reissell wrote: >Hi, > >the mail archives seem to be down so I'll just have to bugger you >mobile BSDers ... > You can search the mailing list archives at http://www.geocrawler.com/lists/3/FreeBSD/ >I recently installed 3.4-20000128-STABLE on my laptop and am now >tinkering with pc cards. Haven't got around to experimenting with >PAO. So far, I've only been working with what the basic install gives >me. > >I already got my nic working alright so things are going pretty >good. The adaptec SlimSCSI (1460A) is giving me some slight headaches, >though. > >When I insert the card, I get a Card inserted message but right after >that pccardd moans: driver allocation failed for Adaptec, Inc. > AFAIK, the Adaptec SlimSCSI 1460A will only work with FreeBSD 4.0-CURRENT. I think the PC Card attachment as well as some CAM patches were only put in recently. I believe some people have this working sucessfully already. The good news is that the 2nd 4.0-RELEASE candidate was just made available so you might want to try that out. ftp://ftp.cdrom.com/pub/FreeBSD/snapshots/i386/4.0-20000214-CURRENT/ >Jussi > -- Eric Futch New York Connect.Net, Ltd. efutch@nyct.net Technical Support Staff http://www.nyct.net (212) 293-2620 "Bringing New York The Internet Access It Deserves" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue Feb 15 11:53: 4 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from rip.psg.com (rip.psg.com [147.28.0.39]) by builder.freebsd.org (Postfix) with ESMTP id 00E7E4C31 for ; Tue, 15 Feb 2000 11:07:08 -0800 (PST) Received: from randy by rip.psg.com with local (Exim 3.13 #1) id 12KnJu-000B9f-00 for freebsd-mobile@freebsd.org; Tue, 15 Feb 2000 11:07:34 -0800 From: Randy Bush MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit To: FreeBSD Laptoppers Subject: ep0 performance Message-Id: Date: Tue, 15 Feb 2000 11:07:34 -0800 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org 3.4R+PAO-20000130 vaio 505tx 3c589c anybody else see ether performance go to hell with recent releases? i am seeing a horrid drop. interrupts? how can i diagnose? randy # 3Com Etherlink III 3C589, 3C589B, 3C589C, 3C589D card "3Com Corporation" "3C589" config auto "ep0" 10 insert logger -s 3Com Etherlink III inserted insert /etc/pccard_ether $device remove logger -s 3Com Etherlink III removed remove /etc/pccard_ether_remove $device syslog: pccardd[61]: Card "3Com Corporation"("3C589") [TP/BNC LAN Card Ver. 2a] [000002] matched "3Com Corporation" ("3C589") [(null)] [(null)] card0: assign ep0 iobase 0x240 irq 10 ep0: utp/bnc[*UTP*] address 00:a0:24:ac:89:33 pccardd[61]: pccardd started dmesg: Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.4-RELEASE #0: Sun Feb 6 02:52:34 PST 2000 root@blort.psg.com:/usr/src/sys/compile/BLORT Timecounter "i8254" frequency 1193182 Hz CPU: Pentium/P55C (quarter-micron) (298.44-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x582 Stepping = 2 Features=0x8001bf real memory = 134217728 (131072K bytes) avail memory = 127737856 (124744K bytes) Preloaded elf kernel "kernel" at 0xc02a5000. Probing for devices on PCI bus 0: chip0: rev 0x01 on pci0.0.0 chip1: rev 0x02 on pci0.7.0 ide_pci0: rev 0x01 on pci0.7.1 chip2: rev 0x02 on pci0.7.3 vga0: rev 0x01 int a irq 9 on pci0.8.0 pcic0: rev 0x00 int a irq 0 on pci0.10.0 RL5C4XX PCI Config Reg: [CSC isa irq] Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> wi0 not found atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 irq 12 on isa psm0: model VersaPad, device ID 0 sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A pcm1 at 0x220 irq 5 drq 1 on isa ESS1879 (rev 11, native mode) fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): wd0: 6194MB (12685680 sectors), 13424 cyls, 15 heads, 63 S/T, 512 B/S ppc0 at 0x378 irq 7 flags 0x40 on isa ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold lpt0: on ppbus 0 lpt0: Interrupt-driven port ep0 not found at 0x300 wlp0 not found at 0x300 awi0 not found at 0x300 pcic0 at 0x3e0-0x3e1 irq 11 on isa PC-Card ctlr(0) Ricoh RL5C475/476 [CardBus bridge mode] (5 mem & 2 I/O windows) pcic0: slot 0 controller I/O address 0x3e0 vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface apm0 on isa apm: found APM BIOS version 1.2 Initializing PC-card drivers: awi ep wi wlp sio wdc Intel Pentium detected, installing workaround for F00F bug changing root device to wd0s2a Card inserted, slot 0 cmd ntpd pid 139 tried to use non-present sched_get_priority_max cmd ntpd pid 139 tried to use non-present sched_setscheduler card0: assign ep0 iobase 0x240 irq 10 ep0: utp/bnc[*UTP*] address 00:a0:24:ac:89:33 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue Feb 15 14: 1:36 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from nohow.demon.co.uk (nohow.demon.co.uk [212.228.18.189]) by builder.freebsd.org (Postfix) with ESMTP id 0EBDD5058 for ; Tue, 15 Feb 2000 12:40:03 -0800 (PST) Received: from localhost (noway@localhost) by nohow.demon.co.uk (8.9.3/8.9.3) with ESMTP id UAA40495; Tue, 15 Feb 2000 20:12:43 GMT (envelope-from noway@nohow.demon.co.uk) Date: Tue, 15 Feb 2000 20:12:43 +0000 (GMT) From: Jose Marques To: Jussi Reissell Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: Adaptec SlimSCSI In-Reply-To: Message-ID: X-No-Archive: yes MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On 15 Feb 2000, Jussi Reissell wrote: > the mail archives seem to be down so I'll just have to bugger you > mobile BSDers ... Just make sure you use a condom. > I recently installed 3.4-20000128-STABLE on my laptop and am now > tinkering with pc cards. Haven't got around to experimenting with > PAO. So far, I've only been working with what the basic install gives > me. You need PAO+3.4-STABLE or 4.0-CURRENT to support this card. The aic driver has not been modified for PCCARD on stock FreeBSD 3.4-STABLE. -- Jose Marques To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue Feb 15 23:20:35 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from postfix2.free.fr (postfix2.free.fr [212.27.32.74]) by builder.freebsd.org (Postfix) with ESMTP id 2EFE83FC1; Tue, 15 Feb 2000 23:20:31 -0800 (PST) Received: from free.fr (paris11-nas3-44-200.dial.proxad.net [212.27.44.200]) by postfix2.free.fr (Postfix) with ESMTP id CEF5E7405D; Wed, 16 Feb 2000 08:20:56 +0100 (MET) Message-ID: <38AA5030.A217E0D2@free.fr> Date: Wed, 16 Feb 2000 08:22:24 +0100 From: Michael Hallgren X-Mailer: Mozilla 4.7 [en] (X11; I; FreeBSD 3.4-STABLE i386) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-stable@FreeBSD.ORG Cc: mobile@freebsd.org Subject: Re: ESS1869 sound card problem.... References: <20000215152342.85168.qmail@hotmail.com> <38A9720C.92558668@jollem.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Ernst de Haan wrote: Someone's found a working setup for the Maestro found in an Inspiron 7k Dell laptop ? Michael > Same problem with me. Wouldn't know how to enable my SoundBlaster Live! > :-( > Any help would be appreciated. > > Ernst > > KAMIL MUHD wrote: > > > > Hi... > > > > I have this ESS1869 ver 1.0.10 sound card and having problem to configure > > it. I'm taking this from my windowz settings. > > > > DMA - 01 > > DMA - 03 > > IRQ - 05 > > I/O range - 0220-022F > > I/O range - 0388-038B > > I/O range - 0330-0331 > > > > I doesn't really know how to add it into the kernel. Before this I was using > > the OSS (open sound system) but the evaluation copy has expired. Can anyone > > help me? Thank you. > > ______________________________________________________ > > Get Your Private, Free Email at http://www.hotmail.com > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-stable" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 16 0:22:56 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from mars.siad.net (mail.siad.net [207.105.242.58]) by builder.freebsd.org (Postfix) with ESMTP id 0F6B54499 for ; Wed, 16 Feb 2000 00:22:52 -0800 (PST) Received: from siad.net (localhost [127.0.0.1]) by mars.siad.net (8.9.3/8.9.3) with ESMTP id AAA03895 for ; Wed, 16 Feb 2000 00:34:53 GMT (envelope-from don@siad.net) Message-ID: <38A9F0AD.5DC99178@siad.net> Date: Wed, 16 Feb 2000 00:34:53 +0000 From: "Don L. Belcher" Organization: SIAD, Inc. X-Mailer: Mozilla 4.7 [en] (X11; I; FreeBSD 3.4-RELEASE i386) X-Accept-Language: zh-TW, en MIME-Version: 1.0 To: freebsd-mobile@FreeBSD.ORG Subject: Re: Cardbus Attribute memory access problem? References: <38A24EE5.6CD2C2C5@siad.net> <200002110455.VAA47045@harmony.village.org> <38A33B93.58EE1EB4@siad.net> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org "Don L. Belcher" wrote: > If somebody could supply me the information for Cardbus I'll write a > driver for it, is this possible? > > Warner Losh wrote: > > > In message <38A24EE5.6CD2C2C5@siad.net> "Don L. Belcher" writes: > > : I would like to have FreeBSD working on my portable and have network > > : card working. My computer is a EPS Technologies APEX 233 mhz, I > > : don't seem to be reading Attribute memory correctly (maybe not > > : enabled for some reason). I'm sending 6 files as attachmets with > > : information. If you need any more information or this is the wrong > > : email address to ask for help let me know. > > > > Cardbus isn't supported. They are 3.3V devices, and FreeBSD also > > doesn't support 3.3v devices.... > > > > Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 16 8:27:18 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from builder.freebsd.org (builder.FreeBSD.ORG [204.216.27.24]) by hub.freebsd.org (Postfix) with ESMTP id 5659337B505 for ; Wed, 16 Feb 2000 08:27:16 -0800 (PST) (envelope-from reissell@cc.helsinki.fi) Received: from post.it.helsinki.fi (post.it.helsinki.fi [128.214.205.24]) by builder.freebsd.org (Postfix) with ESMTP id 0D61D132DD for ; Wed, 16 Feb 2000 08:26:39 -0800 (PST) Received: from mursu.pesa.fi (root@majuri.in.helsinki.fi [128.214.204.67]) by post.it.helsinki.fi (8.9.3/8.9.3-SPAMmers-sod-off) with ESMTP id SAA10457 for ; Wed, 16 Feb 2000 18:27:06 +0200 (EET) Received: (from poku@localhost) by mursu.pesa.fi (8.9.3/8.9.3) id SAA00450; Wed, 16 Feb 2000 18:25:58 +0200 To: freebsd-mobile@FreeBSD.ORG Subject: Re: Adaptec SlimSCSI References: <20000215131713.A5365@pir.net> From: Jussi Reissell Date: 16 Feb 2000 18:25:58 +0200 In-Reply-To: Peter Radcliffe's message of "Tue, 15 Feb 2000 13:17:13 -0500" Message-ID: Lines: 34 X-Mailer: Gnus v5.5/Emacs 20.3 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Peter Radcliffe writes: > Jussi Reissell probably said: > > I recently installed 3.4-20000128-STABLE on my laptop and am now > > > I already got my nic working alright so things are going pretty > > good. The adaptec SlimSCSI (1460A) is giving me some slight headaches, > > though. > > > Initializing PC-card drivers: ep sio > > This means aic isn't getting set up as a pcmcia driver. > Unless you see aic listed there, it will never work. > > > So, what could be wrong? The "config" line for the SlimSCSI looks like > > a possible suspect as do the io/irq values. At the moment I have no > > way of checking them, so a push in the right direction is very much > > appreciated. > > To my knowledge the patches for cam-ised aic are not in STABLE yet (I > could be wrong here). They definately are in PAO for 3.4, > however. I'm using that with my 1460B with no problems. Yes. This is it! Both you and the email responses I got offered me two solutions: either upgrade to 4.0 or install PAO for 3.4. Being the tenderfoot that I am, I chose to get the PAO and install it. And things are working very well! Thanks to everybody for taking the time! Jussi To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 16 10:35:24 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from builder.freebsd.org (builder.FreeBSD.ORG [204.216.27.24]) by hub.freebsd.org (Postfix) with ESMTP id 08CFB37B523 for ; Wed, 16 Feb 2000 10:35:23 -0800 (PST) (envelope-from plambert@pinky.plambert.net) Received: from pinky.plambert.net (pinky.plambert.net [205.219.88.225]) by builder.freebsd.org (Postfix) with ESMTP id 8ECBB132EC for ; Wed, 16 Feb 2000 10:34:45 -0800 (PST) Received: (from plambert@localhost) by pinky.plambert.net (8.9.3/8.9.3) id KAA67374 for mobile@freebsd.org; Wed, 16 Feb 2000 10:35:16 -0800 (PST) (envelope-from plambert) Date: Wed, 16 Feb 2000 10:35:16 -0800 From: "Paul M . Lambert" To: mobile@freebsd.org Subject: Suggestion for PC Card Modem? Message-ID: <20000216103516.A39478@pinky.plambert.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0i Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I've got a Toshiba Tecra 8000. I'm interested in finding a modem that works well with 3.4-STABLE, and that will hopefully continue to work with future STABLE releases without too much trouble. Currently, I've got an internal WinModem, which is useless, and is the only remaining hardware reason that I need to boot into NT on the box. Once I've tested a modem and make a recommendation, my team will probably be buying about 10 of them for all of our laptops, so it's important that I give it a good testing first... ;-) Suggestions, anyone? --Paul M. Lambert -- I hate bombs, terrorism, fear, plans, future and past injustices, manifestos, popular sentiment, ignition, timetables, meetings, and poorly adjusted weasels. A warm hello to my friends and fans in domestic surveillance! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 16 10:36:28 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from builder.freebsd.org (builder.FreeBSD.ORG [204.216.27.24]) by hub.freebsd.org (Postfix) with ESMTP id 3873E37B523 for ; Wed, 16 Feb 2000 10:36:27 -0800 (PST) (envelope-from plambert@pinky.plambert.net) Received: from pinky.plambert.net (pinky.plambert.net [205.219.88.225]) by builder.freebsd.org (Postfix) with ESMTP id 5D105132E8 for ; Wed, 16 Feb 2000 10:35:50 -0800 (PST) Received: (from plambert@localhost) by pinky.plambert.net (8.9.3/8.9.3) id KAA67387 for mobile@freebsd.org; Wed, 16 Feb 2000 10:36:25 -0800 (PST) (envelope-from plambert) Date: Wed, 16 Feb 2000 10:36:25 -0800 From: "Paul M . Lambert" To: mobile@freebsd.org Subject: suspend/resume on Tecra 8000 under 3.4-STABLE Message-ID: <20000216103625.B39478@pinky.plambert.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0i Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I'm unable to get my Tecra 8000 to ever resume successfully. Does anyone have a list of suggestions to try to get it to work? I'd greatly appreciate it! --Paul M. Lambert -- I hate bombs, terrorism, fear, plans, future and past injustices, manifestos, popular sentiment, ignition, timetables, meetings, and poorly adjusted weasels. A warm hello to my friends and fans in domestic surveillance! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 16 11:39:36 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from builder.freebsd.org (builder.FreeBSD.ORG [204.216.27.24]) by hub.freebsd.org (Postfix) with ESMTP id E19CA37B561 for ; Wed, 16 Feb 2000 11:39:34 -0800 (PST) (envelope-from iwasaki@jp.FreeBSD.org) Received: from tasogare.imasy.or.jp (tasogare.imasy.or.jp [202.227.24.5]) by builder.freebsd.org (Postfix) with ESMTP id 831FE132E2 for ; Wed, 16 Feb 2000 11:38:56 -0800 (PST) Received: from localhost (isdnb25.imasy.or.jp [202.227.24.153]) by tasogare.imasy.or.jp (8.9.3+3.2W/3.7W-tasogare/smtpfeed 1.01) with ESMTP id EAA04336; Thu, 17 Feb 2000 04:39:24 +0900 (JST) (envelope-from iwasaki@jp.FreeBSD.org) Message-Id: <200002161939.EAA04336@tasogare.imasy.or.jp> To: plambert@plambert.net Cc: mobile@freebsd.org Subject: Re: suspend/resume on Tecra 8000 under 3.4-STABLE In-Reply-To: Your message of "Wed, 16 Feb 2000 10:36:25 -0800" <20000216103625.B39478@pinky.plambert.net> References: <20000216103625.B39478@pinky.plambert.net> X-Mailer: Mew version 1.93 on Emacs 19.34 / Mule 2.3 (SUETSUMUHANA) Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Date: Thu, 17 Feb 2000 04:39:23 +0900 From: Mitsuru IWASAKI X-Dispatcher: imput version 980905(IM100) Lines: 6 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, > I'm unable to get my Tecra 8000 to ever resume successfully. Does anyone > have a list of suggestions to try to get it to work? Did you try options "VM86" in your kernel config? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 16 11:50:17 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from builder.freebsd.org (builder.FreeBSD.ORG [204.216.27.24]) by hub.freebsd.org (Postfix) with ESMTP id AD62737B62D; Wed, 16 Feb 2000 11:50:15 -0800 (PST) (envelope-from dfr@nlsystems.com) Received: from finch-post-10.mail.demon.net (finch-post-10.mail.demon.net [194.217.242.38]) by builder.freebsd.org (Postfix) with ESMTP id 55457132E8; Wed, 16 Feb 2000 11:49:29 -0800 (PST) Received: from nlsys.demon.co.uk ([158.152.125.33] helo=herring.nlsystems.com) by finch-post-10.mail.demon.net with esmtp (Exim 2.12 #1) id 12LASI-000F2B-0A; Wed, 16 Feb 2000 19:49:47 +0000 Received: from salmon.nlsystems.com (salmon.nlsystems.com [10.0.0.3]) by herring.nlsystems.com (8.9.3/8.8.8) with ESMTP id TAA53892; Wed, 16 Feb 2000 19:51:11 GMT (envelope-from dfr@nlsystems.com) Date: Wed, 16 Feb 2000 19:50:06 +0000 (GMT) From: Doug Rabson To: Mike Smith Cc: "Gail M. Pickett" , freebsd-mobile@freebsd.org Subject: Re: XFree86 and Intel 810 chipset In-Reply-To: <200002151909.LAA02215@mass.cdrom.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Tue, 15 Feb 2000, Mike Smith wrote: > > I just bought a desktop computer that has an Intel 810 chipset and I am > > having trouble setting up XFree86. I updated to the newly released version > > 3.3.6 which says it supports the Intel 810 chipset (video driver), but I > > have been unable to make the thing fly. > > > > The info from XFree86.org says that it includes support, but it is not > > enabled by default as it needs kernel module. What does that mean? > > > > In the configuration notes (for the 810 chipset) they say that it is > > necessary to install the "agpgart.o" module which accompanies the server. > > I have been unable to find this file. When I find it, how do I compile it? > > It only works on Linux. We need proper AGP support, one of the things > that's been on my to-do list for some time now. > > If there's an aspiring chipset hacker out there looking for a > well-defined task to undertake, please let me know and I can get you > pointed in the right directions. There is a good chance that I will tackle this soon. I've been reading through PI's agp driver for Linux and I think porting it would be reasonably easy (its needed for DRI support on most cards too). The license is an X-style one so it should be ok to use it. -- Doug Rabson Mail: dfr@nlsystems.com Nonlinear Systems Ltd. Phone: +44 181 442 9037 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 16 12: 7:49 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from builder.freebsd.org (builder.FreeBSD.ORG [204.216.27.24]) by hub.freebsd.org (Postfix) with ESMTP id 28FAA37B551 for ; Wed, 16 Feb 2000 12:07:47 -0800 (PST) (envelope-from gmpicket@icx.net) Received: from icx.net (icx.net [206.96.250.2]) by builder.freebsd.org (Postfix) with ESMTP id 9E963132ED for ; Wed, 16 Feb 2000 12:07:02 -0800 (PST) Received: from gail (pm6d.icx.net [216.82.6.19]) by icx.net (IDG-2.7/1.3nr) with SMTP id PAA16852; Wed, 16 Feb 2000 15:07:29 -0500 (EST) Message-Id: <3.0.6.32.20000216150948.007a1790@mailhub.icx.net> X-Sender: gmpicket@mailhub.icx.net X-Mailer: QUALCOMM Windows Eudora Light Version 3.0.6 (32) Date: Wed, 16 Feb 2000 15:09:48 -0500 To: Doug Rabson , freebsd-mobile@freebsd.org From: "Gail M. Pickett" Subject: Re: XFree86 and Intel 810 chipset In-Reply-To: References: <200002151909.LAA02215@mass.cdrom.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org At 07:50 PM 2/16/00 +0000, you wrote: >On Tue, 15 Feb 2000, Mike Smith wrote: > >> > I just bought a desktop computer that has an Intel 810 chipset and I am >> > having trouble setting up XFree86. I updated to the newly released version >> > 3.3.6 which says it supports the Intel 810 chipset (video driver), but I >> > have been unable to make the thing fly. >> > >> > The info from XFree86.org says that it includes support, but it is not >> > enabled by default as it needs kernel module. What does that mean? >> > >> > In the configuration notes (for the 810 chipset) they say that it is >> > necessary to install the "agpgart.o" module which accompanies the server. >> > I have been unable to find this file. When I find it, how do I compile it? >> >> It only works on Linux. We need proper AGP support, one of the things >> that's been on my to-do list for some time now. >> >> If there's an aspiring chipset hacker out there looking for a >> well-defined task to undertake, please let me know and I can get you >> pointed in the right directions. > >There is a good chance that I will tackle this soon. I've been reading >through PI's agp driver for Linux and I think porting it would be >reasonably easy (its needed for DRI support on most cards too). The >license is an X-style one so it should be ok to use it. > >-- >Doug Rabson Mail: dfr@nlsystems.com >Nonlinear Systems Ltd. Phone: +44 181 442 9037 > > > > I have for the moment setup XFree86 to run the VGA Server in 800x600 resolution. This works and looks ok. I would like to be able to use a higher resolution and more colors, but whatever. I will be using FreeBSD on the machine, and thus will remain interested in any progress on a driver. I only know the basics of programming, so I would not be much help writing/porting a driver. Gail To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 16 12:25:42 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from builder.freebsd.org (builder.FreeBSD.ORG [204.216.27.24]) by hub.freebsd.org (Postfix) with ESMTP id AD4AF37B53D for ; Wed, 16 Feb 2000 12:25:38 -0800 (PST) (envelope-from plambert@pinky.plambert.net) Received: from pinky.plambert.net (pinky.plambert.net [205.219.88.225]) by builder.freebsd.org (Postfix) with ESMTP id DB767132ED for ; Wed, 16 Feb 2000 12:24:44 -0800 (PST) Received: (from plambert@localhost) by pinky.plambert.net (8.9.3/8.9.3) id MAA71395 for mobile@freebsd.org; Wed, 16 Feb 2000 12:25:11 -0800 (PST) (envelope-from plambert) Date: Wed, 16 Feb 2000 12:25:11 -0800 From: "Paul M . Lambert" To: mobile@freebsd.org Subject: Re: suspend/resume on Tecra 8000 under 3.4-STABLE Message-ID: <20000216122511.D39478@pinky.plambert.net> References: <20000216103625.B39478@pinky.plambert.net> <200002161939.EAA04336@tasogare.imasy.or.jp> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0i In-Reply-To: <200002161939.EAA04336@tasogare.imasy.or.jp> Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Thu, 17 Feb 2000, Mitsuru IWASAKI wrote: > Hi, > > > I'm unable to get my Tecra 8000 to ever resume successfully. Does anyone > > have a list of suggestions to try to get it to work? > > Did you try options "VM86" in your kernel config? Yes, it's there. Here's my entire kernel config file: # $FreeBSD: src/sys/i386/conf/PCCARD,v 1.15.2.4 1999/08/29 17:05:59 iwasaki Exp $ machine "i386" #cpu "I386_CPU" #cpu "I486_CPU" cpu "I586_CPU" cpu "I686_CPU" ident RUNT maxusers 32 #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options MFS_ROOT #MFS usable as root device, "MFS" req'ed options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, "NFS" req'ed options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor config kernel root on wd0 controller isa0 controller pnp0 controller eisa0 controller pci0 # flags 0x1 makes it assume 1.44MB floppy drive... may work to see # floppy when attached after boot... controller fdc0 at isa? port "IO_FD1" bio flags 0x1 irq 6 drq 2 disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 options "CMD640" # work around CMD640 chip deficiency controller wdc0 at isa? port "IO_WD1" bio irq 14 disk wd0 at wdc0 drive 0 #disk wd1 at wdc0 drive 1 #controller wdc1 at isa? port "IO_WD2" bio irq 15 #disk wd2 at wdc1 drive 0 #disk wd3 at wdc1 drive 1 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device acd0 #IDE CD-ROM #device wfd0 #IDE Floppy (e.g. LS-120) # atkbdc0 controlls both the keyboard and the PS/2 mouse controller atkbdc0 at isa? port IO_KBD tty device atkbd0 at isa? tty irq 1 device psm0 at isa? tty irq 12 device vga0 at isa? port ? conflicts # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? tty device npx0 at isa? port IO_NPX irq 13 # # Laptop support (see LINT for more options) # device apm0 at isa? #disable flags 0x31 # Advanced Power Mana gement # PCCARD (PCMCIA) support controller card0 device pcic0 at card? device pcic1 at card? device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 device sio1 at isa? port "IO_COM2" tty irq 3 device sio2 at isa? disable port "IO_COM3" tty irq 5 device sio3 at isa? disable port "IO_COM4" tty irq 9 # Parallel port device ppc0 at isa? port? flags 0x40 net irq 7 controller ppbus0 device lpt0 at ppbus? device plip0 at ppbus? device ppi0 at ppbus? #controller vpo0 at ppbus? # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. #device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 #device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 device ep0 at isa? port 0x300 net irq 10 #device ex0 at isa? port? net irq? #device fe0 at isa? port 0x300 net irq ? #device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 #device lnc0 at isa? port 0x280 net irq 10 drq 0 #device xe0 at isa? port? net irq ? #device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000 #device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 #device cs0 at isa? port 0x300 net irq ? pseudo-device loop pseudo-device ether #pseudo-device sl 1 pseudo-device ppp 1 pseudo-device tun 1 pseudo-device pty 32 pseudo-device snp 2 pseudo-device gzip # Exec gzipped a.out's # KTRACE enables the system-call tracing facility ktrace(2). # This adds 4 KB bloat to your kernel, and slightly increases # the costs of each syscall. options KTRACE #kernel tracing # This provides support for System V shared memory and message queues. # options SYSVSHM options SYSVMSG options SYSVSEM # The `bpfilter' pseudo-device enables the Berkeley Packet Filter. Be # aware of the legal and administrative consequences of enabling this # option. The number of devices determines the maximum number of # simultaneous BPF clients programs runnable. pseudo-device bpfilter 1 #Berkeley packet filter options USER_LDT options "MD5" options "VM86" options PERFMON options NETATALK options IPFIREWALL options IPFIREWALL_VERBOSE options IPDIVERT options IPFILTER options IPFILTER_LOG options "ICMP_BANDLIM" # Real time extensions added int the 1993 Posix # P1003_1B: Infrastructure # _KPOSIX_PRIORITY_SCHEDULING: Build in _POSIX_PRIORITY_SCHEDULING # _KPOSIX_VERSION: Version kernel is built for options "P1003_1B" options "_KPOSIX_PRIORITY_SCHEDULING" options "_KPOSIX_VERSION=199309L" options SOFTUPDATES -- I hate bombs, terrorism, fear, plans, future and past injustices, manifestos, popular sentiment, ignition, timetables, meetings, and poorly adjusted weasels. A warm hello to my friends and fans in domestic surveillance! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 16 12:40: 5 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from builder.freebsd.org (builder.FreeBSD.ORG [204.216.27.24]) by hub.freebsd.org (Postfix) with ESMTP id 9933337B53D for ; Wed, 16 Feb 2000 12:40:04 -0800 (PST) (envelope-from imp@harmony.village.org) Received: from rover.village.org (rover.village.org [204.144.255.49]) by builder.freebsd.org (Postfix) with ESMTP id 2A8F5132E2 for ; Wed, 16 Feb 2000 12:39:19 -0800 (PST) Received: from harmony.village.org (harmony.village.org [10.0.0.6]) by rover.village.org (8.9.3/8.9.3) with ESMTP id NAA73107; Wed, 16 Feb 2000 13:39:43 -0700 (MST) (envelope-from imp@harmony.village.org) Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id NAA12542; Wed, 16 Feb 2000 13:39:38 -0700 (MST) Message-Id: <200002162039.NAA12542@harmony.village.org> To: "Eric D. Futch" Subject: Re: Adaptec SlimSCSI Cc: Jussi Reissell , freebsd-mobile@FreeBSD.ORG In-reply-to: Your message of "Tue, 15 Feb 2000 14:04:25 EST." References: Date: Wed, 16 Feb 2000 13:39:38 -0700 From: Warner Losh Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In message "Eric D. Futch" writes: : AFAIK, the Adaptec SlimSCSI 1460A will only work with FreeBSD 4.0-CURRENT. : I think the PC Card attachment as well as some CAM patches were only put : in recently. I believe some people have this working sucessfully already. I've only integrated it into -current. PAO has integrated the pccard attachment in their version of 3.4. Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 16 12:40:39 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from builder.freebsd.org (builder.FreeBSD.ORG [204.216.27.24]) by hub.freebsd.org (Postfix) with ESMTP id 62E2637B53D for ; Wed, 16 Feb 2000 12:40:38 -0800 (PST) (envelope-from imp@harmony.village.org) Received: from rover.village.org (rover.village.org [204.144.255.49]) by builder.freebsd.org (Postfix) with ESMTP id 6EB50132DE for ; Wed, 16 Feb 2000 12:39:53 -0800 (PST) Received: from harmony.village.org (harmony.village.org [10.0.0.6]) by rover.village.org (8.9.3/8.9.3) with ESMTP id NAA73121; Wed, 16 Feb 2000 13:40:20 -0700 (MST) (envelope-from imp@harmony.village.org) Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id NAA12565; Wed, 16 Feb 2000 13:40:16 -0700 (MST) Message-Id: <200002162040.NAA12565@harmony.village.org> To: "Don L. Belcher" Subject: Re: Cardbus Attribute memory access problem? Cc: freebsd-mobile@FreeBSD.ORG In-reply-to: Your message of "Wed, 16 Feb 2000 00:34:53 GMT." <38A9F0AD.5DC99178@siad.net> References: <38A9F0AD.5DC99178@siad.net> <38A24EE5.6CD2C2C5@siad.net> <200002110455.VAA47045@harmony.village.org> <38A33B93.58EE1EB4@siad.net> Date: Wed, 16 Feb 2000 13:40:16 -0700 From: Warner Losh Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In message <38A9F0AD.5DC99178@siad.net> "Don L. Belcher" writes: : > If somebody could supply me the information for Cardbus I'll write a : > driver for it, is this possible? That's going to be hard, since the only place that I've found enough detail is in the pcmcia's standard, which I can't distribute. Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 16 14:59: 7 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from builder.freebsd.org (builder.FreeBSD.ORG [204.216.27.24]) by hub.freebsd.org (Postfix) with ESMTP id A2D9D37B57C for ; Wed, 16 Feb 2000 14:59:03 -0800 (PST) (envelope-from jose@we.lc.ehu.es) Received: from polaris.we.lc.ehu.es (polaris.we.lc.ehu.es [158.227.6.43]) by builder.freebsd.org (Postfix) with ESMTP id 1EF64132E3 for ; Wed, 16 Feb 2000 14:58:19 -0800 (PST) Received: from we.lc.ehu.es (lxpx61.lx.ehu.es [158.227.99.61]) by polaris.we.lc.ehu.es (8.9.1/8.9.1) with ESMTP id XAA24905; Wed, 16 Feb 2000 23:58:49 +0100 (MET) Message-ID: <38AB2BA7.BE57C02D@we.lc.ehu.es> Date: Wed, 16 Feb 2000 23:58:48 +0100 From: "Jose M. Alcaide" Organization: Universidad del =?iso-8859-1?Q?Pa=EDs?= Vasco - Dpto. de Electricidad y =?iso-8859-1?Q?Electr=F3nica?= X-Mailer: Mozilla 4.7 [en] (X11; U; FreeBSD 3.4-RELEASE i386) X-Accept-Language: es-ES, es, en-US, en MIME-Version: 1.0 To: "Gail M. Pickett" Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: XFree86 and Intel 810 chipset References: <200002151909.LAA02215@mass.cdrom.com> <3.0.6.32.20000216150948.007a1790@mailhub.icx.net> Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org "Gail M. Pickett" wrote: > > I have for the moment setup XFree86 to run the VGA Server in 800x600 > resolution. This works and looks ok. I would like to be able to use a > higher resolution and more colors, but whatever. I will be using FreeBSD > on the machine, and thus will remain interested in any progress on a > driver. I only know the basics of programming, so I would not be much help > writing/porting a driver. > Without the agpgart.o module, only graphics modes limited to 1MB of RAM are available. -- JMA ----------------------------------------------------------------------- José Mª Alcaide | mailto:jose@we.lc.ehu.es Universidad del País Vasco | mailto:jmas@FreeBSD.org Dpto. de Electricidad y Electrónica | http://www.we.lc.ehu.es/~jose Facultad de Ciencias - Campus de Lejona | Tel.: +34-946012479 48940 Lejona (Vizcaya) - SPAIN | Fax: +34-946013071 ----------------------------------------------------------------------- "Beware of Programmers who carry screwdrivers" -- Leonard Brandwein To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 16 15: 7:27 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from builder.freebsd.org (builder.FreeBSD.ORG [204.216.27.24]) by hub.freebsd.org (Postfix) with ESMTP id AC90537B505 for ; Wed, 16 Feb 2000 15:07:25 -0800 (PST) (envelope-from jose@we.lc.ehu.es) Received: from polaris.we.lc.ehu.es (polaris.we.lc.ehu.es [158.227.6.43]) by builder.freebsd.org (Postfix) with ESMTP id 5B28B132E0 for ; Wed, 16 Feb 2000 15:06:42 -0800 (PST) Received: from we.lc.ehu.es (lxpx61.lx.ehu.es [158.227.99.61]) by polaris.we.lc.ehu.es (8.9.1/8.9.1) with ESMTP id AAA24928; Thu, 17 Feb 2000 00:07:10 +0100 (MET) Message-ID: <38AB2D9D.279FCC09@we.lc.ehu.es> Date: Thu, 17 Feb 2000 00:07:09 +0100 From: "Jose M. Alcaide" Organization: Universidad del =?iso-8859-1?Q?Pa=EDs?= Vasco - Dpto. de Electricidad y =?iso-8859-1?Q?Electr=F3nica?= X-Mailer: Mozilla 4.7 [en] (X11; U; FreeBSD 3.4-RELEASE i386) X-Accept-Language: es-ES, es, en-US, en MIME-Version: 1.0 To: "Paul M . Lambert" Cc: mobile@FreeBSD.ORG Subject: Re: Suggestion for PC Card Modem? References: <20000216103516.A39478@pinky.plambert.net> Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org "Paul M . Lambert" wrote: > > I've got a Toshiba Tecra 8000. I'm interested in finding a modem that > works well with 3.4-STABLE, and that will hopefully continue to work > with future STABLE releases without too much trouble. > > Currently, I've got an internal WinModem, which is useless, and is the > only remaining hardware reason that I need to boot into NT on the box. > > Once I've tested a modem and make a recommendation, my team will probably > be buying about 10 of them for all of our laptops, so it's important > that I give it a good testing first... ;-) > > Suggestions, anyone? > I am using the Xircom RealPort Modem 56 (it's like the GlobalAccess, but without ISDN or cellular phone support). The RealPort product line is interesting because they have the RJ connector integrated (they are type-III cards). The only issue I had with that modem is that, because of some bug in the 16550A emulation, I had to increment the sio(4) buffer size from 256 to 1024 in sys/i386/isa/sio.c. Apart from that problem, it works fine with my laptop and FreeBSD 3.4-RELEASE. -- JMA ----------------------------------------------------------------------- José Mª Alcaide | mailto:jose@we.lc.ehu.es Universidad del País Vasco | mailto:jmas@FreeBSD.org Dpto. de Electricidad y Electrónica | http://www.we.lc.ehu.es/~jose Facultad de Ciencias - Campus de Lejona | Tel.: +34-946012479 48940 Lejona (Vizcaya) - SPAIN | Fax: +34-946013071 ----------------------------------------------------------------------- "Beware of Programmers who carry screwdrivers" -- Leonard Brandwein To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 16 21:54:33 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from builder.freebsd.org (builder.FreeBSD.ORG [204.216.27.24]) by hub.freebsd.org (Postfix) with ESMTP id C619237B616 for ; Wed, 16 Feb 2000 21:54:28 -0800 (PST) (envelope-from sanpei@sanpei.org) Received: from oxygen.yy.ics.keio.ac.jp (oxygen.yy.ics.keio.ac.jp [131.113.47.3]) by builder.freebsd.org (Postfix) with ESMTP id B2558132E3 for ; Wed, 16 Feb 2000 21:53:47 -0800 (PST) Received: from lavender.yy.cs.keio.ac.jp (lavender.rad.cc.keio.ac.jp [131.113.16.115]) by oxygen.yy.ics.keio.ac.jp (8.9.3+3.2W/3.7W) with ESMTP id OAA18667; Thu, 17 Feb 2000 14:54:21 +0900 (JST) (envelope-from sanpei@sanpei.org) Received: (from sanpei@localhost) by lavender.yy.cs.keio.ac.jp (8.9.3/3.7W) id OAA02106; Thu, 17 Feb 2000 14:54:21 +0900 (JST) Message-Id: <200002170554.OAA02106@lavender.yy.cs.keio.ac.jp> To: imp@village.org Cc: mobile@FreeBSD.org Subject: [FreeBSD,pccard.conf] config ..... any X-Mailer: Mew version 1.70 on Emacs 19.34.1 / Mule 2.3 Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Date: Thu, 17 Feb 2000 14:54:21 +0900 From: MIHIRA Sanpei Yoshiro Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi Warner-san Warner-san committed some new card info to /etc/pccard.conf.sample on Feb. 14. But some configuration has illegal word(Maybe only for PAO). So there is some error messages from pccardd. I added diff file to pccard.conf.sample. - any --> ? - add `?' --- MIHIRA Sanpei Yoshiro Yokohama, Japan. --- pccard.conf.sample.org Thu Feb 17 14:32:16 2000 +++ pccard.conf.sample Thu Feb 17 14:47:29 2000 @@ -299,7 +299,7 @@ # Allied Telesis CentreCOM LA100-PCM-T V2 card "Allied Telesis, K.K." "CentreCOM LA100-PCM-T V2 100/10M LAN PC Card" - config auto "ed0" any + config auto "ed0" ? insert logger -t pccard:$device -s Allied Telesis LA100-PCM-T V2 inserted insert /etc/pccard_ether $device remove logger -t pccard:$device -s Allied Telesis LA100-PCM-T V2 removed @@ -663,7 +663,7 @@ # SiliconTech, Inc flash card card "SiliconTech,Inc" "16MB Compact PC Card" - config 0x1 "ata1" any + config 0x1 "ata1" ? insert logger -t pccard:$device -s SiliconTech Flash ATA inserted remove logger -t pccard:$device -s SiliconTech Flash ATA removed @@ -742,7 +742,7 @@ # AT&T Paradyne KeepInTouch 14.4 modem card "AT&T Paradyne" "KeepInTouch Card" - config 0x23 "sio3" + config 0x23 "sio3" ? reset 1000 insert logger -t pccard:$device -s ATT Paradyne 14.4 inserted remove logger -t pccard:$device -s ATT Paradyne 14.4 removed To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Feb 16 21:57:59 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from builder.freebsd.org (builder.FreeBSD.ORG [204.216.27.24]) by hub.freebsd.org (Postfix) with ESMTP id 73C8F37B564 for ; Wed, 16 Feb 2000 21:57:58 -0800 (PST) (envelope-from imp@harmony.village.org) Received: from rover.village.org (rover.village.org [204.144.255.49]) by builder.freebsd.org (Postfix) with ESMTP id 53411132DE for ; Wed, 16 Feb 2000 21:57:11 -0800 (PST) Received: from harmony.village.org (harmony.village.org [10.0.0.6]) by rover.village.org (8.9.3/8.9.3) with ESMTP id WAA74749; Wed, 16 Feb 2000 22:57:49 -0700 (MST) (envelope-from imp@harmony.village.org) Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id WAA00336; Wed, 16 Feb 2000 22:57:47 -0700 (MST) Message-Id: <200002170557.WAA00336@harmony.village.org> To: MIHIRA Sanpei Yoshiro Subject: Re: [FreeBSD,pccard.conf] config ..... any Cc: mobile@FreeBSD.org In-reply-to: Your message of "Thu, 17 Feb 2000 14:54:21 +0900." <200002170554.OAA02106@lavender.yy.cs.keio.ac.jp> References: <200002170554.OAA02106@lavender.yy.cs.keio.ac.jp> Date: Wed, 16 Feb 2000 22:57:47 -0700 From: Warner Losh Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org : Warner-san committed some new card info to /etc/pccard.conf.sample : on Feb. 14. But some configuration has illegal word(Maybe only for : PAO). So there is some error messages from pccardd. : : I added diff file to pccard.conf.sample. : - any --> ? : - add `?' You are correct. I tested this with a modified pccardd. I'll just commit this. Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Feb 17 17:26:59 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from mail.nerv.nu (cx639627-c.irvn1.occa.home.com [24.0.209.134]) by hub.freebsd.org (Postfix) with ESMTP id 1328A37B8E2 for ; Thu, 17 Feb 2000 17:26:58 -0800 (PST) (envelope-from nugundam@nerv.nu) Received: from localhost (nugundam@localhost) by mail.nerv.nu (8.9.3/8.9.3) with ESMTP id RAA44214 for ; Thu, 17 Feb 2000 17:27:07 -0800 (PST) (envelope-from nugundam@greenwood3.nerv.nu) Date: Thu, 17 Feb 2000 17:27:07 -0800 (PST) From: Joseph Lee To: freebsd-mobile@freebsd.org Subject: D-Link DMF560TX Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Has anybody been able to get this PCCARD working? Joseph To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Feb 17 19: 3:38 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from smtp.mail.yahoo.com (smtp.mail.yahoo.com [128.11.68.32]) by hub.freebsd.org (Postfix) with SMTP id 765B237B8DE for ; Thu, 17 Feb 2000 19:03:32 -0800 (PST) (envelope-from ncc1701v@yahoo.com) Received: from cci-209150224096.clarityconnect.net (HELO pcswb) (209.150.224.96) by smtp.mail.yahoo.com with SMTP; 17 Feb 2000 19:03:27 -0800 X-Apparently-From: Message-Id: <4.2.2.20000217215618.00a6bf00@kanmail01.ca.newbridge.com> X-Sender: ncc1701v@pop.mail.yahoo.com X-Mailer: QUALCOMM Windows Eudora Pro Version 4.2.2 Date: Thu, 17 Feb 2000 22:02:46 -0500 To: freebsd-mobile@freebsd.org From: Scott Brim Subject: Xircom Realport 10/100 + 56K Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org pccard.conf.sample gives me some confidence that both sides of this card (Ethernet and modem) are supported, but I'd like to be sure before I buy one. Any problems? While I'm on it, another newbie question ... will I still need 3.3+PAO or will support be integrated in 4.0? I see discussion going by but I don't have enough context yet to be sure I understand the conclusions. Thanks much ... Scott __________________________________________________ Do You Yahoo!? Talk to your friends online with Yahoo! Messenger. http://im.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Feb 17 19:15:52 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from smtp.mail.yahoo.com (smtp.mail.yahoo.com [128.11.68.32]) by hub.freebsd.org (Postfix) with SMTP id C7FAE37B68A for ; Thu, 17 Feb 2000 19:15:50 -0800 (PST) (envelope-from ncc1701v@yahoo.com) Received: from cci-209150224096.clarityconnect.net (HELO pcswb) (209.150.224.96) by smtp.mail.yahoo.com with SMTP; 17 Feb 2000 19:15:49 -0800 X-Apparently-From: Message-Id: <4.2.2.20000217221500.00a69260@pop.mail.yahoo.com> X-Sender: ncc1701v@pop.mail.yahoo.com X-Mailer: QUALCOMM Windows Eudora Pro Version 4.2.2 Date: Thu, 17 Feb 2000 22:15:05 -0500 To: freebsd-mobile@freebsd.org From: Scott Brim Subject: please ignore re: Xircom Realport 10/100 + 56K Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Just discovered the Xircom/FreeBSD web page. Sorry. Learn something new every hour. __________________________________________________ Do You Yahoo!? Talk to your friends online with Yahoo! Messenger. http://im.yahoo.com __________________________________________________ Do You Yahoo!? Talk to your friends online with Yahoo! Messenger. http://im.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Feb 18 8:50:57 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from jade.chc-chimes.com (jade.chc-chimes.com [216.28.46.6]) by hub.freebsd.org (Postfix) with ESMTP id 7FA9837B965 for ; Fri, 18 Feb 2000 08:50:50 -0800 (PST) (envelope-from billf@jade.chc-chimes.com) Received: by jade.chc-chimes.com (Postfix, from userid 1001) id E14181C4A; Fri, 18 Feb 2000 11:50:49 -0500 (EST) Date: Fri, 18 Feb 2000 11:50:49 -0500 From: Bill Fumerola To: Scott Brim Cc: freebsd-mobile@freebsd.org Subject: Re: Xircom Realport 10/100 + 56K Message-ID: <20000218115049.B92177@jade.chc-chimes.com> References: <4.2.2.20000217215618.00a6bf00@kanmail01.ca.newbridge.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0i In-Reply-To: <4.2.2.20000217215618.00a6bf00@kanmail01.ca.newbridge.com>; from ncc1701v@yahoo.com on Thu, Feb 17, 2000 at 10:02:46PM -0500 X-Operating-System: FreeBSD 3.2-RELEASE i386 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Thu, Feb 17, 2000 at 10:02:46PM -0500, Scott Brim wrote: > pccard.conf.sample gives me some confidence that both sides of this card > (Ethernet and modem) are supported, but I'd like to be sure before I buy > one. Any problems? While I'm on it, another newbie question ... will I > still need 3.3+PAO or will support be integrated in 4.0? I see > discussion going by but I don't have enough context yet to be sure I > understand the conclusions. In -CURRENT (aka 4.0) the ethernet side doesn't work and the modem randomly freezes my machine. This is the non-cardbus card. -- Bill Fumerola - Network Architect Computer Horizons Corp - CVM e-mail: billf@chc-chimes.com / billf@FreeBSD.org Office: 800-252-2421 x128 / Cell: 248-761-7272 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat Feb 19 9:52:31 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from totem.fix.no (totem.freenix.no [195.0.166.42]) by hub.freebsd.org (Postfix) with ESMTP id 09E3537BBB6 for ; Sat, 19 Feb 2000 09:52:29 -0800 (PST) (envelope-from anders@totem.fix.no) Received: by totem.fix.no (Postfix, from userid 1000) id 4AB285733; Sat, 19 Feb 2000 18:52:23 +0100 (CET) Date: Sat, 19 Feb 2000 18:52:23 +0100 From: Anders Nordby To: bsd-nomads@clave.gr.jp, freebsd-mobile@freebsd.org Subject: LinkMates LM 336 LAN Fax/Modem PC Card (works!) Message-ID: <20000219185223.A44542@totem.fix.no> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i X-Operating-System: FreeBSD 3.4-STABLE X-Warning: Listen, and thou shall not fear. Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, I just want to report that my LinkMates LM 336 PCMCIA card seems to work jolly well with pccardd in FreeBSD 4.0-20000214-CURRENT, with this configuration (feel free to use/include it): # LinkMates LM 336 LAN Fax/Modem PC Card card "PCMCIAs" "ComboCard" config 0x24 "ed1" ? 0x10 insert logger -t pccard:$device -s LinkMates LM 336 inserted insert /etc/pccard_ether $device remove logger -t pccard:$device -s LinkMates LM 336 removed remove /sbin/ifconfig $device delete It reports like this: Feb 19 16:52:21 lappy /kernel: ed1 at port 0x300-0x31f irq 3 slot 1 on pccard1 Feb 19 16:52:21 lappy /kernel: ed1: address 00:e0:98:01:f3:dc, type NE2000 (16 b it) Feb 19 16:52:21 lappy pccard:ed1: LinkMates LM 336 inserted Seems to be a NE2000 compatible card, yes. I can insert/eject the card as I want, and it always works. I don't read the lists I post to here, so please send any feedback directly. Cheers. -- Anders. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat Feb 19 9:54:31 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from anchor-post-30.mail.demon.net (anchor-post-30.mail.demon.net [194.217.242.88]) by hub.freebsd.org (Postfix) with ESMTP id 627EA37BC10 for ; Sat, 19 Feb 2000 09:54:22 -0800 (PST) (envelope-from dmlb@ragnet.demon.co.uk) Received: from ragnet.demon.co.uk ([158.152.46.40]) by anchor-post-30.mail.demon.net with esmtp (Exim 2.12 #1) id 12ME53-0008zu-0U; Sat, 19 Feb 2000 17:54:12 +0000 Received: from dmlb by ragnet.demon.co.uk with local (Exim 3.03 #1) id 12MDii-0009lz-00; Sat, 19 Feb 2000 17:31:04 +0000 Content-Length: 1187 Message-ID: X-Mailer: XFMail 1.3 [p0] on FreeBSD X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 Date: Sat, 19 Feb 2000 17:31:04 -0000 (GMT) From: Duncan Barclay To: imp@village.org, freebsd-mobile@freebsd.org Subject: Raylink driver/Mapping attribute memory Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi I've started work on porting/writing a driver for the Webgear Raylink cards. I need to access the attribute memory on the cards to set and clear interrupts whilst communicating through the shared RAM on the cards. Is there a "real" way to do this in 3.x or -current? I can copy the hacking used in the Xircom Realport driver for the moment if not. I also had a _LOT_ of grief with pccardd/cardd.h's handling of common memory chunks. There are some gross hacks in there to support NE2000 cards but these aren't conditionalised (i.e. assuming access is 16bit and over writing the detected memory size). I'm currently devloping on 3.x - I don't have any -current machines available at present. A colleague at work will start to help in a couple of weeks and we have a number of 802.11 experts on hand (we design 802.11/Bluetooth/HomeRF etc. controller ICs and write the firmware for them). Duncan --- ________________________________________________________________________ Duncan Barclay | God smiles upon the little children, dmlb@ragnet.demon.co.uk | the alcoholics, and the permanently stoned. ________________________________________________________________________ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat Feb 19 21:53:37 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from hotmail.com (f98.law3.hotmail.com [209.185.241.98]) by hub.freebsd.org (Postfix) with SMTP id D91E137BE89 for ; Sat, 19 Feb 2000 21:53:31 -0800 (PST) (envelope-from carlxjw@hotmail.com) Received: (qmail 79889 invoked by uid 0); 20 Feb 2000 05:53:30 -0000 Message-ID: <20000220055330.79888.qmail@hotmail.com> Received: from 144.214.160.201 by www.hotmail.com with HTTP; Sat, 19 Feb 2000 21:53:30 PST X-Originating-IP: [144.214.160.201] From: "carl xu" To: freebsd-mobile@FreeBSD.ORG Subject: for help Date: Sun, 20 Feb 2000 13:53:30 CST Mime-Version: 1.0 Content-Type: text/plain; format=flowed Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Dear sir, I am a notebook user. Can you help me? I need a 'o2 micro/rohm 026836/6860 cardbus controller' driver, my own driver is old version. Thanks a lot. Carl ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat Feb 19 21:56:37 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from freebie.lemis.com (freebie.lemis.com [192.109.197.137]) by hub.freebsd.org (Postfix) with ESMTP id 2384237BE51 for ; Sat, 19 Feb 2000 21:56:33 -0800 (PST) (envelope-from grog@freebie.lemis.com) Received: (from grog@localhost) by freebie.lemis.com (8.9.3/8.9.0) id QAA52403; Sun, 20 Feb 2000 16:26:26 +1030 (CST) Date: Sun, 20 Feb 2000 16:26:26 +1030 From: Greg Lehey To: carl xu Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: for help Message-ID: <20000220162626.J50294@freebie.lemis.com> References: <20000220055330.79888.qmail@hotmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: <20000220055330.79888.qmail@hotmail.com> WWW-Home-Page: http://www.lemis.com/~grog X-PGP-Fingerprint: 6B 7B C3 8C 61 CD 54 AF 13 24 52 F8 6D A4 95 EF Organization: LEMIS, PO Box 460, Echunga SA 5153, Australia Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-41-739-7062 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Sunday, 20 February 2000 at 13:53:30 -0600, carl xu wrote: > Dear sir, > > I am a notebook user. > Can you help me? > I need a 'o2 micro/rohm 026836/6860 cardbus controller' driver, > my own driver is old version. We don't support CardBus yet. Greg -- Finger grog@lemis.com for PGP public key See complete headers for address and phone numbers To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message