Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 10 Apr 1997 16:31:50 +0300 (EEST)
From:      Andrew Stesin <stesin@gu.net>
To:        Stefan Esser <se@freebsd.org>
Cc:        hackers@freebsd.org, scsi@freebsd.org
Subject:   Re: 2 PCI busses, 2 AIC chips, 2.2.1. Howto ?
Message-ID:  <Pine.BSF.3.95q.970410154909.9628N-100000@trifork.gu.net>
In-Reply-To: <Pine.BSF.3.95q.970410104207.2999k-100000@trifork.gu.net>

next in thread | previous in thread | raw e-mail | index | archive | help

Dear Stefan,

as I told you earlier today,

> 	I'll set up a serial console and send a boot -v
> 	for this box to you this evening.

here it goes.

[... boot prompt, "uncompressing kernel", userconfig, [Q] ...]

avail memory = 61059072 (59628K bytes)
eisa0: <INT3190 (System Board)> 
Probing for devices on the EISA bus
pcibus_setup(1):        mode 1 addr port (0x0cf8) is 0x80007804
pcibus_setup(1a):       mode1res=0x80000000 (0x80000000)
pcibus_check:   device 0 is there (id=12258086)
Probing for devices on PCI bus 0:
        configuration mode 1 allows 32 devices.
chip0 <generic PCI bridge (vendor=8086 device=1225 subclass=0)> rev 2 on \
	pci0:0
vx0 <3COM 3C900 Etherlink XL PCI> rev 0 int a irq 10 on pci0:12
        mapreg[10] type=1 addr=0000ef00 size=0040.
utp/aui/bnc[*utp*]: disable 'auto select' with DOS util! \
	address 00:60:97:25:f7:47
chip1 <Intel 82375EB PCI-EISA bridge> rev 5 on pci0:14:0
pci0:15:0: Intel Corporation, device=0x0008, class=0xff, subclass=0x00 \
	 [no driver assigned]
        map(10): mem32(ffe6fc08)
        map(14): mem32(ffe6fc08)
        map(18): mem32(ffe6fc08)
        map(1c): mem32(ffe6fc08)
        map(20): mem32(ffe6fc08)
        map(24): mem32(ffe6fc08)
pci0:15:1: Intel Corporation, device=0x0008, class=0xff, subclass=0x00 \
	[no driver assigned]
        map(10): mem32(ffe6fc08)
        map(14): mem32(ffe6fc08)
        map(18): mem32(ffe6fc08)
        map(1c): mem32(ffe6fc08)
        map(20): mem32(ffe6fc08)
        map(24): mem32(ffe6fc08)
[... absolutely the same output follows for pci0:15:[2-7] ...]
pci0: uses 64 bytes of I/O space from ef00 upto ef3f.
Probing for devices on the ISA bus:
sc0: the current keyboard controller command byte 0065
kbdio: RESET_KBD return code:00fa
kbdio: RESET_KBD status:00aa
sc0 at 0x60-0x6f irq 1 on motherboard
[... and pretty usual ISA stuff, than sysinstall menu screen ...]




Best regards,
Andrew Stesin

nic-hdl: ST73-RIPE





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.95q.970410154909.9628N-100000>