Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 13 Feb 1996 14:27:19 +0500
From:      Richard J Kuhns <rjk@sparcmill.grauel.com>
To:        "Justin T. Gibbs" <gibbs@freefall.freebsd.org>
Cc:        freebsd-stable@freebsd.org
Subject:   Re: One problem && one question 
Message-ID:  <9602131927.AA23929@sparcmill.grauel.com>
In-Reply-To: <199602131550.HAA18721@freefall.freebsd.org>
References:  <9602131439.AA20817@sparcmill.grauel.com> <199602131550.HAA18721@freefall.freebsd.org>

next in thread | previous in thread | raw e-mail | index | archive | help
Justin T. Gibbs writes:
 > >Justin T. Gibbs writes:
 > ><Buslogic id info>  int a irq 10 pci 0:13
 > >  mapreg[10] type 1 addr 0x00006000 size ffff0004
 > >bt0: Invalid base address
 > 
 > boot -v with the old kernel and then use dmesg to retrieve the info.
 > 

That works fine for any ``working'' kernel; apparently none of the boot
messages from a non-working kernel end up in the circular buffer dmesg
uses.  IE, if I boot-working then boot-nonworking then boot-working and run
dmesg, I get the messages from the 2 boot-working kernels only.

If that's what you were interested in, here's the most recent:

FreeBSD 2.1-STABLE #2: Tue Feb 13 14:20:26 EST 1996
    rjk@watson.grauel.com:/prog/2.1-STABLE/src/sys/compile/WATSON
CPU: 100-MHz Pentium 815\\100 (Pentium-class CPU)
  Origin = "GenuineIntel"  Id = 0x525  Stepping=5
  Features=0x1bf<FPU,VME,PSE,MCE,CX8,APIC>
real memory  = 33554432 (32768K bytes)
avail memory = 30728192 (30008K bytes)
pcibus_setup(1):	mode1res=0x80000000 (0x80000000), mode2res=0xff (0x0e)
pcibus_setup(2):	mode1res=0x80000000 (0x80000000)
pcibus_check:	device 0 is there (id=04061039)
Probing for devices on PCI bus 0:
	configuration mode 1 allows 32 devices.
chip0 <SiS 85c501> rev 0 on pci0:0
chip1 <SiS 85c503> rev 0 on pci0:1
pci0:13: Bus Logic, device=0x1040, class=storage (scsi) [no driver assigned]
	map(10): io(6000)
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 at 0x280-0x29f irq 5 maddr 0xd8000 msize 16384 on isa
ed0: address 00:00:c0:15:00:ab, type SMC8216/SMC8216C (16 bit) 
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
pca0 on motherboard
pca0: PC speaker audio driver
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
bt0: Bt946C/ 0-(32bit) bus
bt0: reading board settings, busmastering, int=10
bt0: version 4.25J, fast sync, parity, 32 mbxs, 32 ccbs
bt0: targ 0 sync rate=10.00MB/s(100ns), offset=15
bt0: targ 5 sync rate= 5.00MB/s(200ns), offset=11
bt0: Using Strict Round robin scheme
bt0 at 0x330 irq 10 on isa
bt0 waiting for scsi devices to settle
(bt0:0:0): "MICROP 3243-19MZ  Q4D HT02" type 0 fixed SCSI 2
sd0(bt0:0:0): Direct-Access 4095MB (8388315 512 byte sectors)
sd0(bt0:0:0): with 3956 cyls, 19 heads, and an average 111 sectors/track
(bt0:5:0): "EXABYTE EXB-82058VQANXR1 0790" type 1 removable SCSI 2
st0(bt0:5:0): Sequential-Access density code 0x0,  drive empty
(bt0:6:0): "Chinon CD-ROM CDS-525 V09" type 5 removable SCSI 2
cd0(bt0:6:0): CD-ROM 
cd0(bt0:6:0): UNIT ATTENTION asc:2a,0 Parameters changed
cd present.[400000 x 2048 byte records]
npx0 on motherboard
npx0: INT 16 interface
changing root device to sd0a
BIOS Geometries:
 0:03ff3f20 0..1023=1024 cylinders, 0..63=64 heads, 1..32=32 sectors
 0 accounted for
sd0s1: type 0xa5, start 0, end = 8388314, size 8388315 : OK


 > >I'm afraid I won't be able to test quite so often today; the machine has to
 > >do some Real Work (TM).
 > 
 > When you get a chance, try this one.  Now that I'm not editing over a link
 > with 50% packet loss, its much easier to check my work. :)
 > 

I tried it; I'm afraid it made no difference.  By the way, here's one more
line from the (failing) pci-probe:

bt0: uses 4 bytes of I/O space from 6000 upto 6003
--
Rich Kuhns			rjk@grauel.com
PO Box 6249
100 Sawmill Road
Lafayette, IN  47903
(317)477-6000 x319



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9602131927.AA23929>