Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 18 Nov 2013 09:04:02 -0800
From:      Sean Bruno <sean_bruno@yahoo.com>
To:        Larry Rosenman <ler@lerctr.org>
Cc:        "FreeBSD-scsi@freebsd.org" <FreeBSD-scsi@freebsd.org>
Subject:   Re: 10-BETA3: Bad negotiation on AHD controller
Message-ID:  <1384794242.2592.0.camel@powernoodle.corp.yahoo.com>
In-Reply-To: <20131109144626.GA1672@thebighonker.lerctr.org>
References:  <20131109144626.GA1672@thebighonker.lerctr.org>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help

--=-N2R1aXAlMwuSEqn9eLEJ
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable

On Sat, 2013-11-09 at 08:46 -0600, Larry Rosenman wrote:
> Ever since I put 10 on this box (source upgrade from 8), I've been gettin=
g
> slow disk negotiations on 2 of my 4 disks, and weird messages at boot fro=
m=20
> the ahd controller.
>=20
> Can someone tell if it's my disk or the code?
>=20
> # for i in 0 1 2 3
> > do
> > camcontrol inquiry 0:${i}:0
> > done
> pass0: <FUJITSU MAW3147NC 0104> Fixed Direct Access SCSI-3 device
> pass0: Serial Number DAA0P7A054GD
> pass0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Command Que=
ueing Enabled
> pass1: <FUJITSU MAW3147NC 0104> Fixed Direct Access SCSI-3 device
> pass1: Serial Number DAA0P7A054G3
> pass1: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Command Que=
ueing Enabled
> pass2: <SEAGATE ST3146707LC 0004> Fixed Direct Access SCSI-3 device
> pass2: Serial Number 3KS2NFJG00007611CFPX
> pass2: 3.300MB/s transfers, Command Queueing Enabled
> pass3: <SEAGATE ST3146707LC 0004> Fixed Direct Access SCSI-3 device
> pass3: Serial Number 3KS1Z2KF00007620X9K1
> pass3: 3.300MB/s transfers, Command Queueing Enabled
> #
>=20
> dmesg.boot:
>=20
> Copyright (c) 1992-2013 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> 	The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 10.0-BETA3 #3 r257864: Fri Nov  8 15:20:07 CST 2013
>     root@thebighonker.lerctr.org:/usr/obj/usr/src/sys/THEBIGHONKER amd64
> FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
> CPU: Intel(R) Xeon(TM) CPU 3.00GHz (2992.56-MHz K8-class CPU)
>   Origin =3D "GenuineIntel"  Id =3D 0xf43  Family =3D 0xf  Model =3D 0x4 =
 Stepping =3D 3
>   Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,=
PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>   Features2=3D0x641d<SSE3,DTES64,MON,DS_CPL,CNXT-ID,CX16,xTPR>
>   AMD Features=3D0x20100800<SYSCALL,NX,LM>
>   TSC: P-state invariant
> real memory  =3D 9395240960 (8960 MB)
> avail memory =3D 8282472448 (7898 MB)
> Event timer "LAPIC" quality 400
> ACPI APIC Table: <PTLTD  	 APIC  >
> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
> FreeBSD/SMP: 2 package(s) x 1 core(s) x 2 HTT threads
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP/HT): APIC ID:  1
>  cpu2 (AP): APIC ID:  6
>  cpu3 (AP/HT): APIC ID:  7
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> ioapic1 <Version 2.0> irqs 24-47 on motherboard
> ioapic2 <Version 2.0> irqs 48-71 on motherboard
> random: <Software, Yarrow> initialized
> kbd1 at kbdmux0
> acpi0: <PTLTD   RSDT> on motherboard
> acpi0: Power Button (fixed)
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> cpu2: <ACPI CPU> on acpi0
> cpu3: <ACPI CPU> on acpi0
> hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 o=
n acpi0
> Timecounter "HPET" frequency 14318180 Hz quality 950
> Event timer "HPET" frequency 14318180 Hz quality 450
> Event timer "HPET1" frequency 14318180 Hz quality 440
> Event timer "HPET2" frequency 14318180 Hz quality 440
> atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
> Event timer "RTC" frequency 32768 Hz quality 0
> attimer0: <AT timer> port 0x40-0x43 on acpi0
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Event timer "i8254" frequency 1193182 Hz quality 100
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pci0: <unknown> at device 0.1 (no driver attached)
> pci0: <base peripheral> at device 1.0 (no driver attached)
> pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
> pci2: <ACPI PCI bus> on pcib2
> ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x2400-0x24ff,0x2000-0=
x20ff mem 0xdd200000-0xdd201fff irq 32 at device 2.0 on pci2
> aic7902: Ultra320 Wide Channel A, SCSI Id=3D7, PCI-X 101-133MHz, 512 SCBs
> ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x2c00-0x2cff,0x2800-0=
x28ff mem 0xdd202000-0xdd203fff irq 33 at device 2.1 on pci2
> aic7902: Ultra320 Wide Channel B, SCSI Id=3D7, PCI-X 101-133MHz, 512 SCBs
> pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
> pci3: <ACPI PCI bus> on pcib3
> em0: <Intel(R) PRO/1000 Legacy Network Connection 1.0.6> port 0x3000-0x30=
3f mem 0xdd300000-0xdd31ffff irq 54 at device 2.0 on pci3
> em0: Ethernet address: 00:30:48:2e:99:ba
> em1: <Intel(R) PRO/1000 Legacy Network Connection 1.0.6> port 0x3040-0x30=
7f mem 0xdd320000-0xdd33ffff irq 55 at device 2.1 on pci3
> em1: Ethernet address: 00:30:48:2e:99:bb
> pcib4: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
> pci4: <ACPI PCI bus> on pcib4
> pcib5: <ACPI PCI-PCI bridge> irq 16 at device 6.0 on pci0
> pci5: <ACPI PCI bus> on pcib5
> uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x1400-0x141f irq=
 16 at device 29.0 on pci0
> usbus0 on uhci0
> uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x1420-0x143f irq=
 19 at device 29.1 on pci0
> usbus1 on uhci1
> uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x1440-0x145f irq=
 18 at device 29.2 on pci0
> usbus2 on uhci2
> uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0x1460-0x147f irq=
 16 at device 29.3 on pci0
> usbus3 on uhci3
> ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 0xdd001000-0xdd001=
3ff irq 23 at device 29.7 on pci0
> usbus4: EHCI version 1.0
> usbus4 on ehci0
> pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci6: <ACPI PCI bus> on pcib6
> vgapci0: <VGA-compatible display> port 0x4000-0x40ff mem 0xde000000-0xdef=
fffff,0xdd400000-0xdd400fff irq 17 at device 1.0 on pci6
> drm0: <Rage XL> on vgapci0
> info: [drm] Initialized mach64 2.0.0 20060718
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x1=
77,0x376,0x14a0-0x14af at device 31.1 on pci0
> ata0: <ATA channel> at channel 0 on atapci0
> ata1: <ATA channel> at channel 1 on atapci0
> ichsmb0: <Intel 82801EB (ICH5) SMBus controller> port 0x1100-0x111f irq 1=
7 at device 31.3 on pci0
> smbus0: <System Management Bus> on ichsmb0
> smb0: <SMBus generic I/O> on smbus0
> acpi_button0: <Power Button> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
> fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acp=
i0
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=3D0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> ppc0: cannot reserve I/O port range
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> p4tcc1: <CPU Frequency Thermal Control> on cpu1
> p4tcc2: <CPU Frequency Thermal Control> on cpu2
> p4tcc3: <CPU Frequency Thermal Control> on cpu3
> ZFS filesystem version: 5
> ZFS storage pool version: features support (5000)
> Timecounters tick every 1.000 msec
> random: unblocking device.
> usbus0: 12Mbps Full Speed USB v1.0
> usbus1: 12Mbps Full Speed USB v1.0
> usbus2: 12Mbps Full Speed USB v1.0
> usbus3: 12Mbps Full Speed USB v1.0
> usbus4: 480Mbps High Speed USB v2.0
> ugen1.1: <Intel> at usbus1
> uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
> ugen0.1: <Intel> at usbus0
> uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
> ugen3.1: <Intel> at usbus3
> uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
> ugen2.1: <Intel> at usbus2
> uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
> ugen4.1: <Intel> at usbus4
> uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
> uhub0: 2 ports with 2 removable, self powered
> uhub1: 2 ports with 2 removable, self powered
> uhub2: 2 ports with 2 removable, self powered
> uhub3: 2 ports with 2 removable, self powered
> uhub4: 8 ports with 8 removable, self powered
> ahd0: Invalid Sequencer interrupt occurred.
> >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
> ahd0: Dumping Card State at program address 0x23c Mode 0x0
> Card was paused
> INTSTAT[0x0] SELOID[0x2] SELID[0x30] HS_MAILBOX[0x0]=20
> INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11]=20
> DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)=20
> SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0]=20
> LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0]=20
> SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x6]:(INTMASK1=
|INTMASK2)=20
> SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x5]=20
> KERNEL_QFREEZE_COUNT[0x5] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff]=
=20
> SSTAT0[0x0] SSTAT1[0x8]:(BUSFREE) SSTAT2[0x0] SSTAT3[0x0]=20
> PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)=20
> LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]=20
> LQOSTAT1[0x0] LQOSTAT2[0x0]=20
>=20
> SCB Count =3D 512 CMDS_PENDING =3D 0 LASTSCB 0xffff CURRSCB 0x1fb NEXTSCB=
 0xff40
> qinstart =3D 59 qinfifonext =3D 61
> QINFIFO: 0x1fa 0x1f9
> WAITING_TID_QUEUES:
> Pending list:
> 505 FIFO_USE[0x0] SCB_CONTROL[0x48]:(STATUS_RCVD|DISCENB) SCB_SCSIID[0x7]=
=20
> 506 FIFO_USE[0x0] SCB_CONTROL[0x48]:(STATUS_RCVD|DISCENB) SCB_SCSIID[0x17=
]=20
> Total 2
> Kernel Free SCB lists:=20
>   Any Device: 497 507 500 498 499 501 502 503 504 508 509 510 511 496 495=
 494 493 492 491 490 489 488 487 486 485 484 483 482 481 480 479 478 477 47=
6 475 474 473 472 471 470 469 468 467 466 465 464 463 462 461 460 459 458 4=
57 456 455 454 453 452 451 450 449 448 447 446 445 444 443 442 441 440 439 =
438 437 436 435 434 433 432 431 430 429 428 427 426 425 424 423 422 421 420=
 419 418 417 416 415 414 413 412 411 410 409 408 407 406 405 404 403 402 40=
1 400 399 398 397 396 395 394 393 392 391 390 389 388 387 386 385 384 383 3=
82 381 380 379 378 377 376 375 374 373 372 371 370 369 368 367 366 365 364 =
363 362 361 360 359 358 357 356 355 354 353 352 351 350 349 348 347 346 345=
 344 343 342 341 340 339 338 337 336 335 334 333 332 331 330 329 328 327 32=
6 325 324 323 322 321 320 319 318 317 316 315 314 313 312 311 310 309 308 3=
07 306 305 304 303 302 301 300 299 298 297 296 295 294 293 292 291 290 289 =
288 287 286 285 284 283 282 281 280 279 278 277 276 275 274 273 272 271 270=
 269 268 267 266=20
>  265 264 263 262 261 260 259 258 257 256 255 254 253 252 251 250 249 248 =
247 246 245 244 243 242 241 240 239 238 237 236 235 234 233 232 231 230 229=
 228 227 226 225 224 223 222 221 220 219 218 217 216 215 214 213 212 211 21=
0 209 208 207 206 205 204 203 202 201 200 199 198 197 196 195 194 193 192 1=
91 190 189 188 187 186 185 184 183 182 181 180 179 178 177 176 175 174 173 =
172 171 170 169 168 167 166 165 164 163 162 161 160 159 158 157 156 155 154=
 153 152 151 150 149 148 147 146 145 144 143 142 141 140 139 138 137 136 13=
5 134 133 132 131 130 129 128 127 126 125 124 123 122 121 120 119 118 117 1=
16 115 114 113 112 111 110 109 108 107 106 105 104 103 102 101 100 99 98 97=
 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72=
 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47=
 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22=
 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0=20
> Sequencer Complete DMA-inprog list:=20
> Sequencer Complete list:=20
> Sequencer DMA-Up and Complete list:=20
> Sequencer On QFreeze and Complete list:=20
>=20
>=20
> ahd0: FIFO0 Free, LONGJMP =3D=3D 0x8000, SCB 0x1f1
> SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|=
ENSAVEPTRS)=20
> SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)=
=20
> SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]=20
> SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR =3D 0x00, SHCNT =3D 0=
x0=20
> HADDR =3D 0x00, HCNT =3D 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)=20
>=20
> ahd0: FIFO1 Free, LONGJMP =3D=3D 0x8063, SCB 0x1fb
> SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|=
ENSAVEPTRS)=20
> SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)=
=20
> SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]=20
> SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR =3D 0x00, SHCNT =3D 0=
x0=20
> HADDR =3D 0x00, HCNT =3D 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)=20
> LQIN: 0x8 0x0 0x1 0xf1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x=
0 0x0 0x0 0x0=20
> ahd0: LQISTATE =3D 0x0, LQOSTATE =3D 0x0, OPTIONMODE =3D 0x42
> ahd0: OS_SPACE_CNT =3D 0x20 MAXCMDCNT =3D 0x1
> ahd0: SAVED_SCSIID =3D 0x0 SAVED_LUN =3D 0x0
>=20
> SIMODE0[0xc]:(ENOVERRUN|ENIOERR)=20
> CCSCBCTL[0x0]=20
> ahd0: REG0 =3D=3D 0xb860, SINDEX =3D 0x10e, DINDEX =3D 0x106
> ahd0: SCBPTR =3D=3D 0x1f1, SCB_NEXT =3D=3D 0xff40, SCB_NEXT2 =3D=3D 0x1fb
> CDB 12 0 0 80 88 9
> STACK: 0x237 0x2 0x0 0x0 0x0 0x0 0x0 0x0
> <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
> (probe3:ahd0:0:3:0): inquiry data fails comparison at DV2 step
> (probe2:ahd0:0:2:0): inquiry data fails comparison at DV1 step
> (ahd0:A:3:0): refuses synchronous negotiation. Using asynchronous transfe=
rs
> (ahd0:A:2:0): refuses synchronous negotiation. Using asynchronous transfe=
rs
> da0 at ahd0 bus 0 scbus0 target 0 lun 0
> da0: <FUJITSU MAW3147NC 0104> Fixed Direct Access SCSI-3 device=20
> da0: Serial Number DAA0P7A054GD
> da0: 320.000MB/s transfers (160.000MHz DT, offset 127, 16bit)
> da0: Command Queueing enabled
> da0: 140272MB (287277984 512 byte sectors: 255H 63S/T 17882C)
> cd0 at ata1 bus 0 scbus3 target 1 lun 0
> cd0: <MATSHITA DVD-ROM SR-8177 NE16> Removable CD-ROM SCSI-0 device=20
> cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
> cd0: Attempt to query device size failed: NOT READY, Medium not present
> da2 at ahd0 bus 0 scbus0 target 2 lun 0
> da2: <SEAGATE ST3146707LC 0004> Fixed Direct Access SCSI-3 device=20
> da2: Serial Number 3KS2NFJG00007611CFPX
> da2: 3.300MB/s transfers
> da2: Command Queueing enabled
> da2: 140014MB (286749488 512 byte sectors: 255H 63S/T 17849C)
> da1 at ahd0 bus 0 scbus0 target 1 lun 0
> da1: <FUJITSU MAW3147NC 0104> Fixed Direct Access SCSI-3 device=20
> da1: Serial Number DAA0P7A054G3
> da1: 320.000MB/s transfers (160.000MHz DT, offset 127, 16bit)
> da1: Command Queueing enabled
> da1: 140272MB (287277984 512 byte sectors: 255H 63S/T 17882C)
> da3 at ahd0 bus 0 scbus0 target 3 lun 0
> da3: <SEAGATE ST3146707LC 0004> Fixed Direct Access SCSI-3 device=20
> da3: Serial Number 3KS1Z2KF00007620X9K1
> da3: 3.300MB/s transfers
> da3: Command Queueing enabled
> da3: 140014MB (286749488 512 byte sectors: 255H 63S/T 17849C)
> ses0 at ahd0 bus 0 scbus0 target 6 lun 0
> ses0: <SUPER GEM318 0> Fixed Processor SCSI-2 device=20
> ses0: 3.300MB/s transfers
> ses0: SAF-TE Compliant Device
> SMP: AP CPU #1 Launched!
> SMP: AP CPU #3 Launched!
> SMP: AP CPU #2 Launched!
> Timecounter "TSC-low" frequency 1496279088 Hz quality 1000
> Trying to mount root from ufs:/dev/da0s1a [rw]...


Saw this message today and thought I would chuck it over to freebsd-scsi
to see if anyone can assist.

sean

--=-N2R1aXAlMwuSEqn9eLEJ
Content-Type: application/pgp-signature; name="signature.asc"
Content-Description: This is a digitally signed message part

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (FreeBSD)

iQEcBAABAgAGBQJSikh6AAoJEBkJRdwI6BaHUZkH/0z0DTDDbHwKTHTyEucEUkvN
ggXr65E6caobAthi5qA8O4l78p73V+sSD3RRSDTrsEeJWsevGipZQnVFWpExh/Uu
pwEi9NkiB+tC6MiGFeG+a0h4NMzjD27kWbYtIbDKzlrOIwVuz+5HNeJZNpiVRDSO
zJh+gveJGgD2HqZHqXllHfnJXhzh/SU6IiwvDXEmTilg4YRdGVOsj/BFKZner9P7
XExS/FstHAp4xMGbnjtMkJzrOP3VS/1lZmzmxtrkPpqF3ElrHXkTvrD+7+foy3sk
BF4H3L7it3RbRWzpg9lMbmvjy6QbUjKvfAa5+yHHBc7ruEEHqZ+sNqqsmvdZ4U8=
=Vizo
-----END PGP SIGNATURE-----

--=-N2R1aXAlMwuSEqn9eLEJ--




Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?1384794242.2592.0.camel>