Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 05 Jan 2009 18:38:19 +0200
From:      Igor <finn_19@rambler.ru>
To:        freebsd-questions@freebsd.org
Subject:   Problem with linking kernel
Message-ID:  <1231173499.23453.6.camel@freeBsd_machine>

Next in thread | Raw E-Mail | Index | Archive | Help

--=-qjfsS/VXG1Cjk7s7mQLU
Content-Type: text/plain
Content-Transfer-Encoding: 7bit

Sorry for my English...)))
FreeBSD 7.0
data from Terminal(after using make buildkernel KERNCONF=MYKERNEL)
part with errors:
*****************
linking kernel
uipc_syscalls.o(.text+0x39f): In function `sctp_generic_recvmsg':
: undefined reference to `sctp_sorecvmsg'
uipc_syscalls.o(.text+0x21c6): In function `sctp_generic_sendmsg_iov':
: undefined reference to `sctp_lower_sosend'
uipc_syscalls.o(.text+0x2462): In function `sctp_generic_sendmsg':
: undefined reference to `sctp_lower_sosend'
uipc_syscalls.o(.text+0x2611): In function `sctp_peeloff':
: undefined reference to `sctp_can_peel_off'
uipc_syscalls.o(.text+0x27b6): In function `sctp_peeloff':
: undefined reference to `sctp_do_peeloff'
rtsock.o(.text+0xb0d): In function `rt_newaddrmsg':
: undefined reference to `sctp_addr_change'
in_proto.o(.data+0xa8): undefined reference to `sctp_input'
in_proto.o(.data+0xb0): undefined reference to `sctp_ctlinput'
in_proto.o(.data+0xb4): undefined reference to `sctp_ctloutput'
in_proto.o(.data+0xbc): undefined reference to `sctp_init'
in_proto.o(.data+0xc8): undefined reference to `sctp_drain'
in_proto.o(.data+0xcc): undefined reference to `sctp_usrreqs'
in_proto.o(.data+0xdc): undefined reference to `sctp_input'
in_proto.o(.data+0xe4): undefined reference to `sctp_ctlinput'
in_proto.o(.data+0xe8): undefined reference to `sctp_ctloutput'
in_proto.o(.data+0xfc): undefined reference to `sctp_drain'
in_proto.o(.data+0x100): undefined reference to `sctp_usrreqs'
in_proto.o(.data+0x110): undefined reference to `sctp_input'
in_proto.o(.data+0x118): undefined reference to `sctp_ctlinput'
in_proto.o(.data+0x11c): undefined reference to `sctp_ctloutput'
in_proto.o(.data+0x130): undefined reference to `sctp_drain'
in_proto.o(.data+0x134): undefined reference to `sctp_usrreqs'
if_vr.o(.text+0x1366): In function `vr_init_locked':
: undefined reference to `mii_mediachg'
if_vr.o(.text+0x172b): In function `vr_tick':
: undefined reference to `mii_tick'
if_vr.o(.text+0x1f7f): In function `vr_ifmedia_sts':
: undefined reference to `mii_pollstat'
if_vr.o(.text+0x2da7): In function `vr_attach':
: undefined reference to `mii_phy_probe'
if_vr.o(.data+0x118): undefined reference to `miibus_driver'
if_vr.o(.data+0x11c): undefined reference to `miibus_devclass'
if_vr.o(.data+0x190): undefined reference to `miibus_readreg_desc'
if_vr.o(.data+0x198): undefined reference to `miibus_writereg_desc'
if_vr.o(.data+0x1a0): undefined reference to `miibus_statchg_desc'
*** Error code 1

Stop in /usr/obj/usr/src/sys/MYKERNEL.
*** Error code 1

Stop in /usr/src.
*** Error code 1

Stop in /usr/src.
*****************

Why?

file MYKERNEL is in attachment

--=-qjfsS/VXG1Cjk7s7mQLU
Content-Disposition: attachment; filename=MYKERNEL
Content-Type: text/plain; name=MYKERNEL; charset=us-ascii
Content-Transfer-Encoding: 7bit

#
machine 	i386
cpu		I486_CPU
cpu		I586_CPU
cpu		I686_CPU
ident		MYKERNEL

# To statically compile in device wiring instead of /boot/device.hints
#hints		"GENERIC.hints"		# Default places to look for devices.

#makeoptions	DEBUG=-g		# Build kernel with gdb(1) debug symbols

options 	SCHED_4BSD		# 4BSD scheduler
options 	PREEMPTION		# Enable kernel thread preemption
options 	INET			# InterNETworking
#options 	INET6			# IPv6 communications protocols
options 	SCTP			# Stream Control Transmission Protocol
options 	FFS			# Berkeley Fast Filesystem
options 	SOFTUPDATES		# Enable FFS soft updates support
options 	UFS_ACL			# Support for access control lists
options 	UFS_DIRHASH		# Improve performance on big directories
options 	UFS_GJOURNAL		# Enable gjournal-based UFS journaling
options 	MD_ROOT			# MD is a potential root device
options 	NFSCLIENT		# Network Filesystem Client
options 	NFSSERVER		# Network Filesystem Server
options 	NFS_ROOT		# NFS usable as /, requires NFSCLIENT
#options 	MSDOSFS			# MSDOS Filesystem
#options 	CD9660			# ISO 9660 Filesystem
options 	PROCFS			# Process filesystem (requires PSEUDOFS)
options 	PSEUDOFS		# Pseudo-filesystem framework
options 	GEOM_PART_GPT		# GUID Partition Tables.
options 	GEOM_LABEL		# Provides labelization
options 	COMPAT_43TTY		# BSD 4.3 TTY compat [KEEP THIS!]
options 	COMPAT_FREEBSD4		# Compatible with FreeBSD4
options 	COMPAT_FREEBSD5		# Compatible with FreeBSD5
options 	COMPAT_FREEBSD6		# Compatible with FreeBSD6
#options 	SCSI_DELAY=5000		# Delay (in ms) before probing SCSI
options 	KTRACE			# ktrace(1) support
options 	SYSVSHM			# SYSV-style shared memory
options 	SYSVMSG			# SYSV-style message queues
options 	SYSVSEM			# SYSV-style semaphores
options 	_KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
options 	ADAPTIVE_GIANT		# Giant mutex is adaptive.
options 	STOP_NMI		# Stop CPUS using NMI instead of IPI
options 	AUDIT			# Security event auditing

# To make an SMP kernel, the next two lines are needed
options 	SMP			# Symmetric MultiProcessor Kernel
device		apic			# I/O APIC

# CPU frequency control
device		cpufreq

# Bus support.
device		eisa
device		pci
#device		agp

# Floppy drives
device		fdc

# ATA and ATAPI devices
device		ata
device		atadisk		# ATA disk drives
#device		ataraid		# ATA RAID drives
device		atapicd		# ATAPI CDROM drives
device		atapifd		# ATAPI floppy drives
#device		atapist		# ATAPI tape drives
options 	ATA_STATIC_ID	# Static device numbering

# SCSI Controllers
# device		ahb		# EISA AHA1742 family
# device		ahc		# AHA2940 and onboard AIC7xxx devices
# options 	AHC_REG_PRETTY_PRINT	# Print register bitfields in debug
# 					# output.  Adds ~128k to driver.
# device		ahd		# AHA39320/29320 and onboard AIC79xx devices
# options 	AHD_REG_PRETTY_PRINT	# Print register bitfields in debug
# 					# output.  Adds ~215k to driver.
# device		amd		# AMD 53C974 (Tekram DC-390(T))
# device		hptiop		# Highpoint RocketRaid 3xxx series
# device		isp		# Qlogic family
# device	 	ispfw		# Firmware for QLogic HBAs- normally a module
# device		mpt		# LSI-Logic MPT-Fusion
# device		ncr		# NCR/Symbios Logic
# device		sym		# NCR/Symbios Logic (newer chipsets + those of `ncr')
# device		trm		# Tekram DC395U/UW/F DC315U adapters
# 
# device		adv		# Advansys SCSI adapters
# device		adw		# Advansys wide SCSI adapters
# device		aha		# Adaptec 154x SCSI adapters
# device		aic		# Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
# device		bt		# Buslogic/Mylex MultiMaster SCSI adapters

# device		ncv		# NCR 53C500
# device		nsp		# Workbit Ninja SCSI-3
# device		stg		# TMC 18C30/18C50

# SCSI peripherals
device		scbus		# SCSI bus (required for SCSI)
device		ch		# SCSI media changers
device		da		# Direct Access (disks)
device		sa		# Sequential Access (tape etc)
device		cd		# CD
device		pass		# Passthrough device (direct SCSI access)
device		ses		# SCSI Environmental Services (and SAF-TE)

# atkbdc0 controls both the keyboard and the PS/2 mouse
device		atkbdc		# AT keyboard controller
device		atkbd		# AT keyboard
device		psm		# PS/2 mouse

#device		kbdmux		# keyboard multiplexer

device		vga		# VGA video card driver

device		splash		# Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
device		sc

device		agp		# support several AGP chipsets

# Power management support (see NOTES for more options)
#device		apm
# Add suspend/resume support for the i8254.
device		pmtimer

# Serial (COM) ports
device		sio		# 8250, 16[45]50 based serial ports
device		uart		# Generic UART driver

# Parallel port
device		ppc
device		ppbus		# Parallel port bus (required)
device		lpt		# Printer
device		plip		# TCP/IP over parallel
device		ppi		# Parallel port interface device
#device		vpo		# Requires scbus and da

# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to sio, uart and/or ppc drivers):
#device			puc

# PCI Ethernet NICs.
#device		de		# DEC/Intel DC21x4x (``Tulip'')
#device		em		# Intel PRO/1000 adapter Gigabit Ethernet Card
#device		ixgb		# Intel PRO/10GbE Ethernet Card
#device		le		# AMD Am7900 LANCE and Am79C9xx PCnet
#device		txp		# 3Com 3cR990 (``Typhoon'')
#device		vx		# 3Com 3c590, 3c595 (``Vortex'')
device		vr		# VIA Rhine, Rhine II

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
#device		miibus		# MII bus support
#device		bce		# Broadcom BCM5706/BCM5708 Gigabit Ethernet
#device		bfe		# Broadcom BCM440x 10/100 Ethernet
#device		bge		# Broadcom BCM570xx Gigabit Ethernet
#device		dc		# DEC/Intel 21143 and various workalikes
#device		fxp		# Intel EtherExpress PRO/100B (82557, 82558)
#device		lge		# Level 1 LXT1001 gigabit Ethernet
#device		msk		# Marvell/SysKonnect Yukon II Gigabit Ethernet
#device		nfe		# nVidia nForce MCP on-board Ethernet
#device		nge		# NatSemi DP83820 gigabit Ethernet
#device		nve		# nVidia nForce MCP on-board Ethernet Networking
#device		pcn		# AMD Am79C97x PCI 10/100 (precedence over 'le')
#device		re		# RealTek 8139C+/8169/8169S/8110S
#device		rl		# RealTek 8129/8139
#device		sf		# Adaptec AIC-6915 (``Starfire'')
#device		sis		# Silicon Integrated Systems SiS 900/SiS 7016
#device		sk		# SysKonnect SK-984x & SK-982x gigabit Ethernet
#device		ste		# Sundance ST201 (D-Link DFE-550TX)
#device		stge		# Sundance/Tamarack TC9021 gigabit Ethernet
#device		ti		# Alteon Networks Tigon I/II gigabit Ethernet
#device		tl		# Texas Instruments ThunderLAN
#device		tx		# SMC EtherPower II (83c170 ``EPIC'')
#device		vge		# VIA VT612x gigabit Ethernet
#device		vr		# VIA Rhine, Rhine II
#device		wb		# Winbond W89C840F
#device		xl		# 3Com 3c90x (``Boomerang'', ``Cyclone'')

# ISA Ethernet NICs.  pccard NICs included.
#device		cs		# Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
#device		ed		# NE[12]000, SMC Ultra, 3c503, DS8390 cards
#device		ex		# Intel EtherExpress Pro/10 and Pro/10+
#device		ep		# Etherlink III based cards
#device		fe		# Fujitsu MB8696x based cards
#device		ie		# EtherExpress 8/16, 3C507, StarLAN 10 etc.
#device		sn		# SMC's 9000 series of Ethernet chips
#device		xe		# Xircom pccard Ethernet

# Pseudo devices.
device		loop		# Network loopback
device		random		# Entropy device
device		ether		# Ethernet support
#device		sl		# Kernel SLIP
device		ppp		# Kernel PPP
device		tun		# Packet tunnel.
device		pty		# Pseudo-ttys (telnet etc)
device		md		# Memory "disks"
device		gif		# IPv6 and IPv4 tunneling
device		faith		# IPv6-to-IPv4 relaying (translation)
device		firmware	# firmware assist module

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device		bpf		# Berkeley packet filter

# USB support
device		uhci		# UHCI PCI->USB interface
device		ohci		# OHCI PCI->USB interface
device		ehci		# EHCI PCI->USB interface (USB 2.0)
device		usb		# USB Bus (required)
#device		udbp		# USB Double Bulk Pipe devices
device		ugen		# Generic
device		uhid		# "Human Interface Devices"
device		ukbd		# Keyboard
device		ulpt		# Printer
#device		umass		# Disks/Mass storage - Requires scbus and da
#device		ums		# Mouse
#device		ural		# Ralink Technology RT2500USB wireless NICs
#device		rum		# Ralink Technology RT2501USB wireless NICs
#device		urio		# Diamond Rio 500 MP3 player
#device		uscanner	# Scanners
# USB Ethernet, requires miibus
#device		aue		# ADMtek USB Ethernet
#device		axe		# ASIX Electronics USB Ethernet
#device		cdce		# Generic USB over Ethernet
#device		cue		# CATC USB Ethernet
#device		kue		# Kawasaki LSI USB Ethernet
#device		rue		# RealTek RTL8150 USB Ethernet

# FireWire support
#device		firewire	# FireWire bus code
#device		sbp		# SCSI over FireWire (Requires scbus and da)
#device		fwe		# Ethernet over FireWire (non-standard!)
#device		fwip		# IP over FireWire (RFC 2734,3146)
#device		dcons		# Dumb console driver
#device		dcons_crom	# Configuration ROM for dcons

--=-qjfsS/VXG1Cjk7s7mQLU--




Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?1231173499.23453.6.camel>