Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 08 Jan 2014 20:45:37 +1100
From:      Graham Menhennitt <graham@menhennitt.com.au>
To:        =?ISO-8859-1?Q?Jean-S=E9bastien_P=E9dron?= <jean-sebastien.pedron@dumbbell.fr>, freebsd-stable@freebsd.org
Subject:   Re: X not working on AMD64 Radeon after upgrading 9-Stable to 10-RC3
Message-ID:  <52CD1E41.5010607@menhennitt.com.au>
In-Reply-To: <52C9B483.5060209@dumbbell.fr>
References:  <52C6846A.8010304@menhennitt.com.au> <52C7F922.6010204@FreeBSD.org> <52C8F9AA.1090207@menhennitt.com.au> <52C9B483.5060209@dumbbell.fr>

next in thread | previous in thread | raw e-mail | index | archive | help
On 06/01/2014 06:37, Jean-Sébastien Pédron wrote:
> On 05.01.2014 07:20, Graham Menhennitt wrote:
>> Also, I can't use Alt-F1 etc. to switch to other virtual consoles. And I
>> can't seem to kill X - I need to reboot. But both of those are very
>> minor problems.
> This is expected unfortunately: our console driver (syscons) doesn't
> support the new kernel video drivers. This means that once X.Org is
> started, it's not possible to switch to the console, or have a console
> back when closing the X session.
>
> This problem is fixed in HEAD (11-CURRENT) if you use the new console
> driver (vt(9), previously referred to as "Newcons").
Like I said, it's not really a problem. So I won't bother doing that.
>
> About errors in dmesg(8), I answer below:
>
>> info: [drm] Loading RS690/RS740 Microcode
>> info: [drm] radeon: ring at 0x00000000A0001000
>> error: [drm:pid1162:r100_ring_test] *ERROR* radeon: ring test failed
>> (scratch(0x15E4)=0xCAFEDEAD)
>> error: [drm:pid1162:r100_cp_init] *ERROR* radeon: cp isn't working (-22).
>> drmn0: error: failed initializing CP (-22).
> Those errors are unexpected. Could you please try with Ubuntu 13.04 live
> CD, and check if the same errors occur?
>
Ok, I've included the output of dmesg from Ubuntu 13.04 AMD64. I
couldn't get as far as running X from the live CD though - there was an
error about not being able to find /sbin/init and I got dumped into a
BusyBox shell with a prompt of "initramfs". But dmesg contains "drm" and
"radeon" bits, so I hope it's enough. No errors though.

Thanks again for you help.

Graham

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.8.0-19-generic (buildd@allspice) (gcc
version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #29-Ubuntu SMP Wed Apr 17
18:16:28 UTC 2013 (Ubuntu 3.8.0-19.29-generic 3.8.8)
[    0.000000] Command line: file=/cdrom/preseed/ubuntu.seed boot=casper
initrd=/casper/initrd.lz quiet splash --
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff]
reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff]
reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfedffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cfee0000-0x00000000cfee2fff]
ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cfee3000-0x00000000cfeeffff]
ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cfef0000-0x00000000cfefffff]
reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff]
reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff]
reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000187ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd.
GA-MA69GM-S2H/GA-MA69GM-S2H, BIOS F4 12/07/2007
[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x188000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FF80000000 write-back
[    0.000000]   1 base 0080000000 mask FFC0000000 write-back
[    0.000000]   2 base 00C0000000 mask FFF0000000 write-back
[    0.000000]   3 base 00CFF00000 mask FFFFF00000 uncachable
[    0.000000]   4 base 0100000000 mask FF80000000 write-back
[    0.000000]   5 base 0180000000 mask FFF8000000 write-back
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000188000000 aka 6272M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 256MB, type WB
[    0.000000] reg 3, base: 3327MB, range: 1MB, type UC
[    0.000000] reg 4, base: 4GB, range: 2GB, type WB
[    0.000000] reg 5, base: 6GB, range: 128MB, type WB
[    0.000000] total RAM covered: 3327M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K     chunk_size: 2M     num_reg: 4     
lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 256MB, type WB
[    0.000000] reg 3, base: 3327MB, range: 1MB, type UC
[    0.000000] e820: update [mem 0xcff00000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xcfee0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f5050-0x000f505f] mapped
at [ffff8800000f5050]
[    0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0xcfedffff]
[    0.000000]  [mem 0x00000000-0xcfdfffff] page 2M
[    0.000000]  [mem 0xcfe00000-0xcfedffff] page 4k
[    0.000000] kernel direct mapping tables up to 0xcfedffff @ [mem
0x1fffa000-0x1fffffff]
[    0.000000] init_memory_mapping: [mem 0x100000000-0x187ffffff]
[    0.000000]  [mem 0x100000000-0x187ffffff] page 2M
[    0.000000] kernel direct mapping tables up to 0x187ffffff @ [mem
0xcfedc000-0xcfedffff]
[    0.000000] RAMDISK: [mem 0x7eac7000-0x7fffffff]
[    0.000000] ACPI: RSDP 00000000000f6a10 00014 (v00 GBT   )
[    0.000000] ACPI: RSDT 00000000cfee3000 00038 (v01 GBT    GBTUACPI
42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP 00000000cfee3040 00074 (v01 GBT    GBTUACPI
42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT 00000000cfee30c0 048EF (v01 GBT    GBTUACPI
00001000 MSFT 0100000C)
[    0.000000] ACPI: FACS 00000000cfee0000 00040
[    0.000000] ACPI: SSDT 00000000cfee7a80 0028A (v01 PTLTD  POWERNOW
00000001  LTP 00000001)
[    0.000000] ACPI: HPET 00000000cfee7d40 00038 (v01 GBT    GBTUACPI
42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG 00000000cfee7d80 0003C (v01 GBT    GBTUACPI
42302E31 GBTU 01010101)
[    0.000000] ACPI: APIC 00000000cfee79c0 00084 (v01 GBT    GBTUACPI
42302E31 GBTU 01010101)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000187ffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x187ffffff]
[    0.000000]   NODE_DATA [mem 0x187ffb000-0x187ffffff]
[    0.000000]  [ffffea0000000000-ffffea00061fffff] PMD ->
[ffff880182000000-ffff8801875fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x187ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xcfedffff]
[    0.000000]   node   0: [mem 0x100000000-0x187ffffff]
[    0.000000] On node 0 totalpages: 1408623
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 6 pages reserved
[    0.000000]   DMA zone: 3913 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13244 pages used for memmap
[    0.000000]   DMA32 zone: 834340 pages, LIFO batch:31
[    0.000000]   Normal zone: 8704 pages used for memmap
[    0.000000]   Normal zone: 548352 pages, LIFO batch:31
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI
0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 -
0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000cfee0000 -
00000000cfee3000
[    0.000000] PM: Registered nosave memory: 00000000cfee3000 -
00000000cfef0000
[    0.000000] PM: Registered nosave memory: 00000000cfef0000 -
00000000cff00000
[    0.000000] PM: Registered nosave memory: 00000000cff00000 -
00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 -
00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 -
00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 -
0000000100000000
[    0.000000] e820: [mem 0xcff00000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256
nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff880187c00000 s85056
r8192 d21440 u524288
[    0.000000] pcpu-alloc: s85056 r8192 d21440 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on. 
Total pages: 1386605
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: file=/cdrom/preseed/ubuntu.seed
boot=casper initrd=/casper/initrd.lz quiet splash --
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ c4000000 size 32 MB
[    0.000000] Aperture pointing to e820 RAM. Ignoring.
[    0.000000] Your BIOS doesn't leave a aperture memory hole
[    0.000000] Please enable the IOMMU option in the BIOS setup
[    0.000000] This costs you 64 MB of RAM
[    0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[    0.000000] PM: Registered nosave memory: 00000000c4000000 -
00000000c8000000
[    0.000000] Memory: 5376816k/6422528k available (7006k kernel code,
788036k absent, 257676k reserved, 6238k data, 992k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0,
CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000] NR_IRQS:16640 nr_irqs:712 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 22544384 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't
want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2505.730 MHz processor
[    0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[    0.008006] Calibrating delay loop (skipped), value calculated using
timer frequency.. 5011.46 BogoMIPS (lpj=10022920)
[    0.008010] pid_max: default: 32768 minimum: 301
[    0.008047] Security Framework initialized
[    0.008064] AppArmor: AppArmor initialized
[    0.008065] Yama: becoming mindful.
[    0.008920] Dentry cache hash table entries: 1048576 (order: 11,
8388608 bytes)
[    0.016454] Inode-cache hash table entries: 524288 (order: 10,
4194304 bytes)
[    0.019769] Mount-cache hash table entries: 256
[    0.020209] Initializing cgroup subsys cpuacct
[    0.020212] Initializing cgroup subsys memory
[    0.020225] Initializing cgroup subsys devices
[    0.020227] Initializing cgroup subsys freezer
[    0.020230] Initializing cgroup subsys blkio
[    0.020232] Initializing cgroup subsys perf_event
[    0.020235] Initializing cgroup subsys hugetlb
[    0.020268] tseg: 00cff00000
[    0.020270] CPU: Physical Processor ID: 0
[    0.020271] CPU: Processor Core ID: 0
[    0.020274] mce: CPU supports 5 MCE banks
[    0.020280] LVT offset 0 assigned for vector 0xf9
[    0.020287] process: using AMD E400 aware idle routine
[    0.020290] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.020290] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.020290] tlb_flushall_shift: 4
[    0.020414] Freeing SMP alternatives: 24k freed
[    0.022066] ACPI: Core revision 20121018
[    0.028043] ftrace: allocating 26689 entries in 105 pages
[    0.044526] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.084225] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor
4800+ (fam: 0f, model: 6b, stepping: 02)
[    0.088000] Performance Events: AMD PMU driver.
[    0.088000] ... version:                0
[    0.088000] ... bit width:              48
[    0.088000] ... generic registers:      4
[    0.088000] ... value mask:             0000ffffffffffff
[    0.088000] ... max period:             00007fffffffffff
[    0.088000] ... fixed-purpose events:   0
[    0.088000] ... event mask:             000000000000000f
[    0.088000] NMI watchdog: enabled on all CPUs, permanently consumes
one hw-PMU counter.
[    0.088000] smpboot: Booting Node   0, Processors  #1
[    0.176127] Brought up 2 CPUs
[    0.176130] smpboot: Total of 2 processors activated (10022.74 BogoMIPS)
[    0.176788] devtmpfs: initialized
[    0.177846] EVM: security.selinux
[    0.177848] EVM: security.SMACK64
[    0.177850] EVM: security.capability
[    0.177872] PM: Registering ACPI NVS region [mem
0xcfee0000-0xcfee2fff] (12288 bytes)
[    0.180208] regulator-dummy: no parameters
[    0.180281] NET: Registered protocol family 16
[    0.180417] node 0 link 0: io port [d000, ffff]
[    0.180420] TOM: 00000000d8000000 aka 3456M
[    0.180423] node 0 link 0: mmio [a0000, bffff]
[    0.180425] node 0 link 0: mmio [d8000000, dfffffff]
[    0.180427] node 0 link 0: mmio [e0000000, fe02ffff]
[    0.180430] node 0 link 0: mmio [e0000000, efffffff]
[    0.180431] TOM2: 0000000188000000 aka 6272M
[    0.180434] bus: [bus 00-02] on node 0 link 0
[    0.180436] bus: 00 [io  0x0000-0xffff]
[    0.180438] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.180439] bus: 00 [mem 0xd8000000-0xffffffff]
[    0.180440] bus: 00 [mem 0x188000000-0xfcffffffff]
[    0.180501] ACPI: bus type pci registered
[    0.180564] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[    0.180567] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.193790] PCI: Using configuration type 1 for base access
[    0.194943] bio: create slab <bio-0> at 0
[    0.194943] ACPI: Added _OSI(Module Device)
[    0.194943] ACPI: Added _OSI(Processor Device)
[    0.194943] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.194943] ACPI: Added _OSI(Processor Aggregator Device)
[    0.194943] ACPI: EC: Look up EC in DSDT
[    0.196756] ACPI: Executed 1 blocks of module-level executable AML code
[    0.200016] ACPI: Interpreter enabled
[    0.200021] ACPI: (supports S0 S1 S4 S5)
[    0.200039] ACPI: Using IOAPIC for interrupt routing
[    0.206778] ACPI: No dock devices found.
[    0.206786] PCI: Ignoring host bridge windows from ACPI; if
necessary, use "pci=use_crs" and report a bug
[    0.206860] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.206863] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.207087] pci_root PNP0A03:00: host bridge window [io 
0x0000-0x0cf7] (ignored)
[    0.207090] pci_root PNP0A03:00: host bridge window [io 
0x0d00-0xffff] (ignored)
[    0.207093] pci_root PNP0A03:00: host bridge window [mem
0x000a0000-0x000bffff] (ignored)
[    0.207096] pci_root PNP0A03:00: host bridge window [mem
0x000c0000-0x000dffff] (ignored)
[    0.207099] pci_root PNP0A03:00: host bridge window [mem
0xd8000000-0xfebfffff] (ignored)
[    0.207101] PCI: root bus 00: hardware-probed resources
[    0.207141] PCI host bridge to bus 0000:00
[    0.207145] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.207147] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.207150] pci_bus 0000:00: root bus resource [mem
0x000a0000-0x000bffff]
[    0.207153] pci_bus 0000:00: root bus resource [mem
0xd8000000-0xffffffff]
[    0.207155] pci_bus 0000:00: root bus resource [mem
0x188000000-0xfcffffffff]
[    0.207164] pci 0000:00:00.0: [1002:7910] type 00 class 0x060000
[    0.207195] pci 0000:00:01.0: [1002:7912] type 01 class 0x060400
[    0.207253] pci 0000:00:12.0: [1002:4380] type 00 class 0x01018f
[    0.207272] pci 0000:00:12.0: reg 10: [io  0xff00-0xff07]
[    0.207283] pci 0000:00:12.0: reg 14: [io  0xfe00-0xfe03]
[    0.207294] pci 0000:00:12.0: reg 18: [io  0xfd00-0xfd07]
[    0.207304] pci 0000:00:12.0: reg 1c: [io  0xfc00-0xfc03]
[    0.207315] pci 0000:00:12.0: reg 20: [io  0xfb00-0xfb0f]
[    0.207326] pci 0000:00:12.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
[    0.207349] pci 0000:00:12.0: set SATA to AHCI mode
[    0.207391] pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310
[    0.207406] pci 0000:00:13.0: reg 10: [mem 0xfe02e000-0xfe02efff]
[    0.207480] pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310
[    0.207495] pci 0000:00:13.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
[    0.207567] pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310
[    0.207582] pci 0000:00:13.2: reg 10: [mem 0xfe02c000-0xfe02cfff]
[    0.207653] pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310
[    0.207668] pci 0000:00:13.3: reg 10: [mem 0xfe02b000-0xfe02bfff]
[    0.207740] pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310
[    0.207755] pci 0000:00:13.4: reg 10: [mem 0xfe02a000-0xfe02afff]
[    0.207833] pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320
[    0.207854] pci 0000:00:13.5: reg 10: [mem 0xfe029000-0xfe0290ff]
[    0.207942] pci 0000:00:13.5: supports D1 D2
[    0.207944] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[    0.207971] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.208017] pci 0000:00:14.0: reg 10: [io  0x0b00-0x0b0f]
[    0.208108] pci 0000:00:14.1: [1002:438c] type 00 class 0x01018a
[    0.208123] pci 0000:00:14.1: reg 10: [io  0x0000-0x0007]
[    0.208133] pci 0000:00:14.1: reg 14: [io  0x0000-0x0003]
[    0.208144] pci 0000:00:14.1: reg 18: [io  0x0000-0x0007]
[    0.208154] pci 0000:00:14.1: reg 1c: [io  0x0000-0x0003]
[    0.208165] pci 0000:00:14.1: reg 20: [io  0xf900-0xf90f]
[    0.208209] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.208232] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
[    0.208303] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.208324] pci 0000:00:14.3: [1002:438d] type 00 class 0x060100
[    0.208406] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.208458] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[    0.208481] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[    0.208498] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[    0.208516] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[    0.208564] pci 0000:01:05.0: [1002:791e] type 00 class 0x030000
[    0.208574] pci 0000:01:05.0: reg 10: [mem 0xd8000000-0xdfffffff
64bit pref]
[    0.208581] pci 0000:01:05.0: reg 18: [mem 0xfdfe0000-0xfdfeffff 64bit]
[    0.208586] pci 0000:01:05.0: reg 20: [io  0xee00-0xeeff]
[    0.208591] pci 0000:01:05.0: reg 24: [mem 0xfde00000-0xfdefffff]
[    0.208607] pci 0000:01:05.0: supports D1 D2
[    0.208620] pci 0000:01:05.2: [1002:7919] type 00 class 0x040300
[    0.208630] pci 0000:01:05.2: reg 10: [mem 0xfdffc000-0xfdffffff 64bit]
[    0.208670] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.208674] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.208677] pci 0000:00:01.0:   bridge window [mem 0xfde00000-0xfdffffff]
[    0.208681] pci 0000:00:01.0:   bridge window [mem
0xd8000000-0xdfffffff 64bit pref]
[    0.208724] pci 0000:02:07.0: [104c:8020] type 00 class 0x0c0010
[    0.208748] pci 0000:02:07.0: reg 10: [mem 0xfddff000-0xfddff7ff]
[    0.208762] pci 0000:02:07.0: reg 14: [mem 0xfddf4000-0xfddf7fff]
[    0.208858] pci 0000:02:07.0: supports D2
[    0.208861] pci 0000:02:07.0: PME# supported from D2 D3hot
[    0.208898] pci 0000:02:0e.0: [104c:8024] type 00 class 0x0c0010
[    0.208923] pci 0000:02:0e.0: reg 10: [mem 0xfddfe000-0xfddfe7ff]
[    0.208936] pci 0000:02:0e.0: reg 14: [mem 0xfddf8000-0xfddfbfff]
[    0.209033] pci 0000:02:0e.0: supports D1 D2
[    0.209036] pci 0000:02:0e.0: PME# supported from D0 D1 D2 D3hot
[    0.209064] pci 0000:02:0f.0: [10ec:8167] type 00 class 0x020000
[    0.209086] pci 0000:02:0f.0: reg 10: [io  0xde00-0xdeff]
[    0.209099] pci 0000:02:0f.0: reg 14: [mem 0xfddfd000-0xfddfd0ff]
[    0.209154] pci 0000:02:0f.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.209192] pci 0000:02:0f.0: supports D1 D2
[    0.209194] pci 0000:02:0f.0: PME# supported from D1 D2 D3hot D3cold
[    0.209232] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
[    0.209237] pci 0000:00:14.4:   bridge window [io  0xd000-0xdfff]
[    0.209242] pci 0000:00:14.4:   bridge window [mem 0xfdd00000-0xfddfffff]
[    0.209247] pci 0000:00:14.4:   bridge window [mem
0xfdc00000-0xfdcfffff pref]
[    0.209250] pci 0000:00:14.4:   bridge window [io  0x0000-0xffff]
(subtractive decode)
[    0.209253] pci 0000:00:14.4:   bridge window [mem
0x000a0000-0x000bffff] (subtractive decode)
[    0.209256] pci 0000:00:14.4:   bridge window [mem
0xd8000000-0xffffffff] (subtractive decode)
[    0.209259] pci 0000:00:14.4:   bridge window [mem
0x188000000-0xfcffffffff] (subtractive decode)
[    0.209316] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[    0.209413] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    0.209450]  pci0000:00: ACPI _OSC support notification failed,
disabling PCIe ASPM
[    0.209453]  pci0000:00: Unable to request _OSC control (_OSC support
mask: 0x08)
[    0.210624] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11)
*0, disabled.
[    0.210671] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11)
*0, disabled.
[    0.210716] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11)
*0, disabled.
[    0.210760] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11)
*0, disabled.
[    0.210803] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11)
*0, disabled.
[    0.210847] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11)
*0, disabled.
[    0.210891] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11)
*0, disabled.
[    0.210934] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11)
*0, disabled.
[    0.211052] vgaarb: device added:
PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[    0.211052] vgaarb: loaded
[    0.211052] vgaarb: bridge control possible 0000:01:05.0
[    0.211052] SCSI subsystem initialized
[    0.211052] ACPI: bus type scsi registered
[    0.211052] libata version 3.00 loaded.
[    0.211052] ACPI: bus type usb registered
[    0.211052] usbcore: registered new interface driver usbfs
[    0.211052] usbcore: registered new interface driver hub
[    0.211052] usbcore: registered new device driver usb
[    0.211052] PCI: Using ACPI for IRQ routing
[    0.220839] PCI: pci_cache_line_size set to 64 bytes
[    0.220921] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.220923] e820: reserve RAM buffer [mem 0xcfee0000-0xcfffffff]
[    0.221042] NetLabel: Initializing
[    0.221043] NetLabel:  domain hash size = 128
[    0.221044] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.221057] NetLabel:  unlabeled traffic allowed by default
[    0.221075] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.221075] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    0.222083] Switching to clocksource hpet
[    0.229096] AppArmor: AppArmor Filesystem Enabled
[    0.229138] pnp: PnP ACPI init
[    0.229160] ACPI: bus type pnp registered
[    0.229300] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.229303] system 00:00: [io  0x0220-0x0225] has been reserved
[    0.229306] system 00:00: [io  0x0290-0x0294] has been reserved
[    0.229311] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.229539] pnp 00:01: disabling [mem 0x00000000-0x00000fff window]
because it overlaps 0000:02:0f.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[    0.229564] system 00:01: [io  0x4100-0x411f] has been reserved
[    0.229567] system 00:01: [io  0x0228-0x022f] has been reserved
[    0.229570] system 00:01: [io  0x040b] has been reserved
[    0.229572] system 00:01: [io  0x04d6] has been reserved
[    0.229575] system 00:01: [io  0x0c00-0x0c01] has been reserved
[    0.229578] system 00:01: [io  0x0c14] has been reserved
[    0.229581] system 00:01: [io  0x0c50-0x0c52] has been reserved
[    0.229584] system 00:01: [io  0x0c6c-0x0c6d] has been reserved
[    0.229587] system 00:01: [io  0x0c6f] has been reserved
[    0.229590] system 00:01: [io  0x0cd0-0x0cd1] has been reserved
[    0.229593] system 00:01: [io  0x0cd2-0x0cd3] has been reserved
[    0.229596] system 00:01: [io  0x0cd4-0x0cdf] has been reserved
[    0.229599] system 00:01: [io  0x4000-0x40fe] has been reserved
[    0.229602] system 00:01: [io  0x4210-0x4217] has been reserved
[    0.229605] system 00:01: [io  0x0b00-0x0b1f] could not be reserved
[    0.229608] system 00:01: [io  0x0238-0x023f] has been reserved
[    0.229617] system 00:01: [mem 0xfee00400-0xfee00fff window] has been
reserved
[    0.229621] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.229730] pnp 00:02: [dma 4]
[    0.229757] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.229829] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.229881] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.229908] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.229947] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.230112] pnp 00:07: [dma 2]
[    0.230150] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.230462] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.230707] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.230833] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.230904] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[    0.230907] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.231116] system 00:0c: [mem 0x000cd600-0x000cffff] has been reserved
[    0.231120] system 00:0c: [mem 0x000f0000-0x000f7fff] could not be
reserved
[    0.231123] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be
reserved
[    0.231126] system 00:0c: [mem 0x000fc000-0x000fffff] could not be
reserved
[    0.231129] system 00:0c: [mem 0xcfee0000-0xcfefffff] could not be
reserved
[    0.231132] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved
[    0.231135] system 00:0c: [mem 0x00000000-0x0009ffff] could not be
reserved
[    0.231138] system 00:0c: [mem 0x00100000-0xcfedffff] could not be
reserved
[    0.231141] system 00:0c: [mem 0xcfff0000-0xd7feffff] could not be
reserved
[    0.231145] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be
reserved
[    0.231148] system 00:0c: [mem 0xfee00000-0xfee00fff] could not be
reserved
[    0.231151] system 00:0c: [mem 0xfff80000-0xfffeffff] has been reserved
[    0.231155] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.231173] pnp: PnP ACPI: found 13 devices
[    0.231175] ACPI: ACPI bus type pnp unregistered
[    0.238498] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.238504] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.238508] pci 0000:00:01.0:   bridge window [mem 0xfde00000-0xfdffffff]
[    0.238511] pci 0000:00:01.0:   bridge window [mem
0xd8000000-0xdfffffff 64bit pref]
[    0.238520] pci 0000:02:0f.0: BAR 6: assigned [mem
0xfdc00000-0xfdc1ffff pref]
[    0.238523] pci 0000:00:14.4: PCI bridge to [bus 02]
[    0.238527] pci 0000:00:14.4:   bridge window [io  0xd000-0xdfff]
[    0.238533] pci 0000:00:14.4:   bridge window [mem 0xfdd00000-0xfddfffff]
[    0.238538] pci 0000:00:14.4:   bridge window [mem
0xfdc00000-0xfdcfffff pref]
[    0.238556] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.238559] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[    0.238562] pci_bus 0000:00: resource 6 [mem 0xd8000000-0xffffffff]
[    0.238564] pci_bus 0000:00: resource 7 [mem 0x188000000-0xfcffffffff]
[    0.238568] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.238570] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdffffff]
[    0.238573] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff
64bit pref]
[    0.238576] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.238579] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
[    0.238581] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
[    0.238584] pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
[    0.238587] pci_bus 0000:02: resource 5 [mem 0x000a0000-0x000bffff]
[    0.238590] pci_bus 0000:02: resource 6 [mem 0xd8000000-0xffffffff]
[    0.238592] pci_bus 0000:02: resource 7 [mem 0x188000000-0xfcffffffff]
[    0.238648] NET: Registered protocol family 2
[    0.238893] TCP established hash table entries: 65536 (order: 8,
1048576 bytes)
[    0.239738] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.240591] TCP: Hash tables configured (established 65536 bind 65536)
[    0.240715] TCP: reno registered
[    0.240734] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.240859] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.241071] NET: Registered protocol family 1
[    0.660085] pci 0000:01:05.0: Boot video device
[    0.660100] PCI: CLS 4 bytes, default 64
[    0.660181] Trying to unpack rootfs image as initramfs...
[    5.797650] Freeing initrd memory: 21732k freed
[    5.813513] PCI-DMA: Disabling AGP.
[    5.813623] PCI-DMA: aperture base @ c4000000 size 65536 KB
[    5.813624] PCI-DMA: using GART IOMMU.
[    5.813629] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    5.818538] Initialise module verification
[    5.818602] audit: initializing netlink socket (disabled)
[    5.818615] type=2000 audit(1389172110.812:1): initialized
[    5.848498] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    5.850607] VFS: Disk quotas dquot_6.5.2
[    5.850667] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    5.851345] fuse init (API version 7.20)
[    5.851453] msgmni has been set to 10672
[    5.852165] Key type asymmetric registered
[    5.852167] Asymmetric key parser 'x509' registered
[    5.852210] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 252)
[    5.852255] io scheduler noop registered
[    5.852259] io scheduler deadline registered (default)
[    5.852266] io scheduler cfq registered
[    5.852455] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    5.852472] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    5.852607] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    5.852613] ACPI: Power Button [PWRB]
[    5.852664] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    5.852667] ACPI: Power Button [PWRF]
[    5.855455] GHES: HEST is not enabled!
[    5.855563] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    5.876110] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    5.877951] Linux agpgart interface v0.103
[    5.879579] brd: module loaded
[    5.880557] loop: module loaded
[    5.881027] libphy: Fixed MDIO Bus: probed
[    5.881108] tun: Universal TUN/TAP device driver, 1.6
[    5.881109] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    5.881169] PPP generic driver version 2.4.2
[    5.881223] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.881225] ehci-pci: EHCI PCI platform driver
[    5.881285] ehci-pci 0000:00:13.5: EHCI Host Controller
[    5.881296] ehci-pci 0000:00:13.5: new USB bus registered, assigned
bus number 1
[    5.881308] ehci-pci 0000:00:13.5: applying AMD SB600/SB700 USB
freeze workaround
[    5.881324] ehci-pci 0000:00:13.5: debug port 1
[    5.881389] ehci-pci 0000:00:13.5: irq 19, io mem 0xfe029000
[    5.892021] ehci-pci 0000:00:13.5: USB 2.0 started, EHCI 1.00
[    5.892061] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    5.892064] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    5.892066] usb usb1: Product: EHCI Host Controller
[    5.892069] usb usb1: Manufacturer: Linux 3.8.0-19-generic ehci_hcd
[    5.892071] usb usb1: SerialNumber: 0000:00:13.5
[    5.892211] hub 1-0:1.0: USB hub found
[    5.892216] hub 1-0:1.0: 10 ports detected
[    5.892427] ehci-platform: EHCI generic platform driver
[    5.892436] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.892477] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    5.892485] ohci_hcd 0000:00:13.0: new USB bus registered, assigned
bus number 2
[    5.892519] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
[    5.952024] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    5.952027] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    5.952030] usb usb2: Product: OHCI Host Controller
[    5.952032] usb usb2: Manufacturer: Linux 3.8.0-19-generic ohci_hcd
[    5.952035] usb usb2: SerialNumber: 0000:00:13.0
[    5.952135] hub 2-0:1.0: USB hub found
[    5.952142] hub 2-0:1.0: 2 ports detected
[    5.952250] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    5.952257] ohci_hcd 0000:00:13.1: new USB bus registered, assigned
bus number 3
[    5.952289] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
[    6.012020] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    6.012023] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    6.012025] usb usb3: Product: OHCI Host Controller
[    6.012028] usb usb3: Manufacturer: Linux 3.8.0-19-generic ohci_hcd
[    6.012030] usb usb3: SerialNumber: 0000:00:13.1
[    6.012129] hub 3-0:1.0: USB hub found
[    6.012136] hub 3-0:1.0: 2 ports detected
[    6.012242] ohci_hcd 0000:00:13.2: OHCI Host Controller
[    6.012250] ohci_hcd 0000:00:13.2: new USB bus registered, assigned
bus number 4
[    6.012279] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
[    6.072022] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    6.072025] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    6.072027] usb usb4: Product: OHCI Host Controller
[    6.072030] usb usb4: Manufacturer: Linux 3.8.0-19-generic ohci_hcd
[    6.072032] usb usb4: SerialNumber: 0000:00:13.2
[    6.072128] hub 4-0:1.0: USB hub found
[    6.072135] hub 4-0:1.0: 2 ports detected
[    6.072241] ohci_hcd 0000:00:13.3: OHCI Host Controller
[    6.072248] ohci_hcd 0000:00:13.3: new USB bus registered, assigned
bus number 5
[    6.072263] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
[    6.132019] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    6.132022] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    6.132024] usb usb5: Product: OHCI Host Controller
[    6.132026] usb usb5: Manufacturer: Linux 3.8.0-19-generic ohci_hcd
[    6.132029] usb usb5: SerialNumber: 0000:00:13.3
[    6.132144] hub 5-0:1.0: USB hub found
[    6.132151] hub 5-0:1.0: 2 ports detected
[    6.132261] ohci_hcd 0000:00:13.4: OHCI Host Controller
[    6.132271] ohci_hcd 0000:00:13.4: new USB bus registered, assigned
bus number 6
[    6.132286] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
[    6.192020] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    6.192023] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    6.192025] usb usb6: Product: OHCI Host Controller
[    6.192027] usb usb6: Manufacturer: Linux 3.8.0-19-generic ohci_hcd
[    6.192030] usb usb6: SerialNumber: 0000:00:13.4
[    6.192129] hub 6-0:1.0: USB hub found
[    6.192136] hub 6-0:1.0: 2 ports detected
[    6.192228] uhci_hcd: USB Universal Host Controller Interface driver
[    6.192307] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    6.192308] i8042: PNP: PS/2 appears to have AUX port disabled, if
this is incorrect please boot with i8042.nopnp
[    6.192467] serio: i8042 KBD port at 0x60,0x64 irq 1
[    6.192613] mousedev: PS/2 mouse device common for all mice
[    6.192777] rtc_cmos 00:04: RTC can wake from S4
[    6.192910] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    6.192948] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    6.193071] device-mapper: uevent: version 1.0.3
[    6.193146] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18)
initialised: dm-devel@redhat.com
[    6.193156] cpuidle: using governor ladder
[    6.193157] cpuidle: using governor menu
[    6.193161] ledtrig-cpu: registered to indicate activity on CPUs
[    6.193163] EFI Variables Facility v0.08 2004-May-17
[    6.193462] ashmem: initialized
[    6.193609] TCP: cubic registered
[    6.193739] NET: Registered protocol family 10
[    6.193950] NET: Registered protocol family 17
[    6.193961] Key type dns_resolver registered
[    6.194225] Loading module verification certificates
[    6.195326] MODSIGN: Loaded cert 'Magrathea: Glacier signing key:
d490763cc418e29de79f40a5aa7d97747ec8882c'
[    6.195341] registered taskstats version 1
[    6.198577] Key type trusted registered
[    6.201508] Key type encrypted registered
[    6.204065] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    6.204632] rtc_cmos 00:04: setting system clock to 2014-01-08
09:08:31 UTC (1389172111)
[    6.204756] powernow-k8: fid 0x11 (2500 MHz), vid 0xa
[    6.204758] powernow-k8: fid 0x10 (2400 MHz), vid 0xb
[    6.204760] powernow-k8: fid 0xe (2200 MHz), vid 0xd
[    6.204762] powernow-k8: fid 0xc (2000 MHz), vid 0xf
[    6.204763] powernow-k8: fid 0xa (1800 MHz), vid 0x11
[    6.204765] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[    6.204794] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core
Processor 4800+ (2 cpu cores) (version 2.20.00)
[    6.204810] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    6.204811] EDD information not available.
[    6.206553] Freeing unused kernel memory: 992k freed
[    6.207142] Write protecting the kernel read-only data: 12288k
[    6.210955] Freeing unused kernel memory: 1176k freed
[    6.214249] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input2
[    6.215159] Freeing unused kernel memory: 1080k freed
<30>[    6.236782] udevd[97]: starting version 175
[    6.323027] Disabling lock debugging due to kernel taint
[    6.326550] ahci 0000:00:12.0: version 3.0
[    6.326637] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing
32bit
[    6.326748] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps
0xf impl SATA mode
[    6.326753] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp
pio slum part ccc
[    6.327861] scsi0 : ahci
[    6.327970] scsi1 : ahci
[    6.328082] scsi2 : ahci
[    6.328153] scsi3 : ahci
[    6.328201] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port
0xfe02f100 irq 22
[    6.328205] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port
0xfe02f180 irq 22
[    6.328208] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port
0xfe02f200 irq 22
[    6.328211] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port
0xfe02f280 irq 22
[    6.337955] scsi4 : pata_atiixp
[    6.338872] scsi5 : pata_atiixp
[    6.339191] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900
irq 14
[    6.339195] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908
irq 15
[    6.342843] usb 1-1: New USB device found, idVendor=0bc2, idProduct=5031
[    6.342848] usb 1-1: New USB device strings: Mfr=2, Product=3,
SerialNumber=1
[    6.342851] usb 1-1: Product: FreeAgent GoFlex
[    6.342854] usb 1-1: Manufacturer: Seagate
[    6.342856] usb 1-1: SerialNumber: NA0EDE1C
[    6.362538] [drm] Initialized drm 1.1.0 20060810
[    6.367831] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    6.367923] r8169 0000:02:0f.0 (unregistered net_device): not PCI Express
[    6.368317] r8169 0000:02:0f.0 eth0: RTL8169sc/8110sc at
0xffffc90000c7c000, 00:1d:7d:d4:93:50, XID 18000000 IRQ 23
[    6.368320] r8169 0000:02:0f.0 eth0: jumbo features [frames: 7152
bytes, tx checksumming: ok]
[    6.369130] Floppy drive(s): fd0 is 1.44M
[    6.388243] FDC 0 is a post-1991 82077
[    6.435067] [drm] radeon defaulting to kernel modesetting.
[    6.435072] [drm] radeon kernel modesetting enabled.
[    6.435458] [drm] initializing kernel modesetting (RS690
0x1002:0x791E 0x1458:0xD001).
[    6.435481] [drm] register mmio base: 0xFDFE0000
[    6.435483] [drm] register mmio size: 65536
[    6.435785] ATOM BIOS: ATI
[    6.435825] radeon 0000:01:05.0: VRAM: 128M 0x00000000D0000000 -
0x00000000D7FFFFFF (128M used)
[    6.435828] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 -
0x00000000BFFFFFFF
[    6.435858] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    6.435859] [drm] Driver supports precise vblank timestamp query.
[    6.435889] radeon 0000:01:05.0: irq 40 for MSI/MSI-X
[    6.435903] radeon 0000:01:05.0: radeon: using MSI.
[    6.435923] [drm] radeon: irq initialized.
[    6.436598] firewire_ohci 0000:02:07.0: added OHCI v1.0 device as
card 0, 4 IR + 8 IT contexts, quirks 0x2
[    6.436624] [drm] Detected VRAM RAM=128M, BAR=128M
[    6.436626] [drm] RAM width 128bits DDR
[    6.436812] [TTM] Zone  kernel: Available graphics memory: 2733886 kiB
[    6.436814] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    6.436815] [TTM] Initializing pool allocator
[    6.436821] [TTM] Initializing DMA pool allocator
[    6.436856] [drm] radeon: 128M of VRAM memory ready
[    6.436858] [drm] radeon: 512M of GTT memory ready.
[    6.436878] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    6.458825] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[    6.465763] [drm] PCIE GART of 512M enabled (table at
0x00000000CF900000).
[    6.465823] radeon 0000:01:05.0: WB enabled
[    6.465829] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr
0x00000000a0000000 and cpu addr 0xffff8800cf8b3000
[    6.465903] [drm] Loading RS690/RS740 Microcode
[    6.466090] [drm] radeon: ring at 0x00000000A0001000
[    6.466109] [drm] ring test succeeded in 1 usecs
[    6.466226] [drm] ib test succeeded in 0 usecs
[    6.466444] [drm] Radeon Display Connectors
[    6.466446] [drm] Connector 0:
[    6.466447] [drm]   VGA-1
[    6.466449] [drm]   DDC: 0x7e50 0x7e40 0x7e54 0x7e44 0x7e58 0x7e48
0x7e5c 0x7e4c
[    6.466451] [drm]   Encoders:
[    6.466452] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    6.466453] [drm] Connector 1:
[    6.466455] [drm]   SVIDEO-1
[    6.466456] [drm]   Encoders:
[    6.466457] [drm]     TV1: INTERNAL_KLDSCP_DAC1
[    6.466458] [drm] Connector 2:
[    6.466460] [drm]   HDMI-A-1
[    6.466462] [drm]   DDC: 0x7e40 0x7e50 0x7e44 0x7e54 0x7e48 0x7e58
0x7e4c 0x7e5c
[    6.466463] [drm]   Encoders:
[    6.466464] [drm]     DFP3: INTERNAL_LVTM1
[    6.501558] firewire_ohci 0000:02:0e.0: added OHCI v1.10 device as
card 1, 4 IR + 8 IT contexts, quirks 0x2
[    6.538815] usb 1-3: new high-speed USB device number 4 using ehci-pci
[    6.598505] [drm] fb mappable at 0xD8040000
[    6.598507] [drm] vram apper at 0xD8000000
[    6.598508] [drm] size 5300224
[    6.598509] [drm] fb depth is 24
[    6.598511] [drm]    pitch is 5888
[    6.598620] fbcon: radeondrmfb (fb0) is primary device
[    6.622135] Console: switching to colour frame buffer device 180x56
[    6.632128] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[    6.632130] radeon 0000:01:05.0: registered panic notifier
[    6.632138] [drm] Initialized radeon 2.29.0 20080528 for 0000:01:05.0
on minor 0
[    6.640095] ata5.01: NODEV after polling detection
[    6.648077] ata2: SATA link down (SStatus 0 SControl 300)
[    6.648117] ata1: SATA link down (SStatus 0 SControl 300)
[    6.648149] ata4: SATA link down (SStatus 0 SControl 300)
[    6.669264] usb 1-3: New USB device found, idVendor=05e3, idProduct=0608
[    6.669268] usb 1-3: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[    6.669270] usb 1-3: Product: USB2.0 Hub
[    6.669672] hub 1-3:1.0: USB hub found
[    6.670012] hub 1-3:1.0: 4 ports detected
[    6.799755] Initializing USB Mass Storage driver...
[    6.799947] scsi6 : usb-storage 1-1:1.0
[    6.800103] usbcore: registered new interface driver usb-storage
[    6.800105] USB Mass Storage support registered.
[    6.820030] ata3: softreset failed (device not ready)
[    6.820037] ata3: applying PMP SRST workaround and retrying
[    6.932035] usb 2-2: new low-speed USB device number 2 using ohci_hcd
[    6.936960] firewire_core 0000:02:07.0: created device fw0: GUID
00308d0100009e97, S400
[    6.992044] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    7.004155] firewire_core 0000:02:0e.0: created device fw1: GUID
001d7d0000f3e516, S400
[    7.034984] ata3.00: HPA detected: current 156299375, native 156301488
[    7.034990] ata3.00: ATA-7: ST380815AS, 4.AAB, max UDMA/133
[    7.034992] ata3.00: 156299375 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    7.034995] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[    7.093286] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[    7.093288] ata3.00: configured for UDMA/133
[    7.093482] scsi 2:0:0:0: Direct-Access     ATA      ST380815AS      
4.AA PQ: 0 ANSI: 5
[    7.093695] sd 2:0:0:0: [sda] 156299375 512-byte logical blocks:
(80.0 GB/74.5 GiB)
[    7.093744] sd 2:0:0:0: [sda] Write Protect is off
[    7.093747] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    7.093768] sd 2:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[    7.094073] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    7.102103] usb 2-2: New USB device found, idVendor=045e, idProduct=0084
[    7.102108] usb 2-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[    7.102110] usb 2-2: Product: Basic Optical Mouse
[    7.102113] usb 2-2: Manufacturer: Microsoft
[    7.115183] usbcore: registered new interface driver usbhid
[    7.115187] usbhid: USB HID core driver
[    7.119088] input: Microsoft Basic Optical Mouse as
/devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/input/input3
[    7.119213] hid-generic 0003:045E:0084.0001: input,hidraw0: USB HID
v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:13.0-2/input0
[    7.176339] usb 1-3.4: new high-speed USB device number 5 using ehci-pci
[    7.208079] xor: automatically using best checksumming function:
[    7.214770]  sda: sda1 sda2 sda3
[    7.215164] sd 2:0:0:0: [sda] Attached SCSI disk
[    7.248012]    generic_sse:  7479.000 MB/sec
[    7.250460] device-mapper: dm-raid45: initialized v0.2594b
[    7.269477] usb 1-3.4: New USB device found, idVendor=05e3,
idProduct=0608
[    7.269483] usb 1-3.4: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[    7.269486] usb 1-3.4: Product: USB2.0 Hub
[    7.270090] hub 1-3.4:1.0: USB hub found
[    7.270354] hub 1-3.4:1.0: 4 ports detected
[    7.544271] usb 1-3.4.1: new high-speed USB device number 6 using
ehci-pci
[    7.636771] usb 1-3.4.1: New USB device found, idVendor=04b8,
idProduct=012c
[    7.636776] usb 1-3.4.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[    7.636779] usb 1-3.4.1: Product: EPSON Scanner
[    7.636781] usb 1-3.4.1: Manufacturer: EPSON
[    7.708278] usb 1-3.4.4: new full-speed USB device number 7 using
ehci-pci
[    7.801415] usb 1-3.4.4: New USB device found, idVendor=067b,
idProduct=2303
[    7.801417] usb 1-3.4.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[    7.801420] usb 1-3.4.4: Product: USB-Serial Controller
[    7.801422] usb 1-3.4.4: Manufacturer: Prolific Technology Inc.
[    7.802953] scsi 6:0:0:0: Direct-Access     Seagate  USB 3.0 Cable   
0210 PQ: 0 ANSI: 0
[    7.803718] sd 6:0:0:0: Attached scsi generic sg1 type 0
[    7.804458] sd 6:0:0:0: [sdb] 976773167 512-byte logical blocks: (500
GB/465 GiB)
[    7.805706] sd 6:0:0:0: [sdb] Write Protect is off
[    7.805713] sd 6:0:0:0: [sdb] Mode Sense: 0f 00 00 00
[    7.806680] sd 6:0:0:0: [sdb] No Caching mode page present
[    7.806683] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    7.809424] sd 6:0:0:0: [sdb] No Caching mode page present
[    7.809428] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    7.842069]  sdb: sdb4
[    7.842069]  sdb4: <bsd: >
[    7.847308] sd 6:0:0:0: [sdb] No Caching mode page present
[    7.847313] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    7.847317] sd 6:0:0:0: [sdb] Attached SCSI disk
[  108.996841] r8169 0000:02:0f.0 eth0: link down
[  108.996869] r8169 0000:02:0f.0 eth0: link down
[  108.996917] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  111.991866] r8169 0000:02:0f.0 eth0: link up
[  111.991875] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  187.945193] FS-Cache: Loaded
[  187.948824] FS-Cache: Netfs 'cifs' registered for caching
[  187.948954] Key type cifs.spnego registered
[  187.948968] Key type cifs.idmap registered
[  192.223791] CIFS: the value of the unc= mount option does not match
the device string. Using the unc= option for now. In 3.10, that option
will be ignored and the contents of the device string will be used
instead. ((null) != \\203.2.73.1\data)
[  192.887353] CIFS VFS: could not allocate crypto API arc4
[  192.925341] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[  192.925352] CIFS VFS: Send error in SessSetup = -13
[  192.925459] CIFS VFS: cifs_mount failed w/return code = -13
[  231.174722] CIFS: the value of the unc= mount option does not match
the device string. Using the unc= option for now. In 3.10, that option
will be ignored and the contents of the device string will be used
instead. ((null) != \\203.2.73.1\data)
[  231.191450] CIFS VFS: could not allocate crypto API arc4
[  231.193123] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[  231.193136] CIFS VFS: Send error in SessSetup = -13
[  231.193225] CIFS VFS: cifs_mount failed w/return code = -13
[  260.240098] CIFS VFS: CIFS mount error: No usable UNC path provided
in device string or in unc= option!
[  262.875877] CIFS: the value of the unc= mount option does not match
the device string. Using the unc= option for now. In 3.10, that option
will be ignored and the contents of the device string will be used
instead. ((null) != \\203.2.73.1\data)
[  262.891947] CIFS VFS: could not allocate crypto API arc4




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?52CD1E41.5010607>