Date: Mon, 22 Dec 2003 23:00:14 +0100 From: Michael Lestinsky <michael@lestinsky.de> To: freebsd-current@freebsd.org Subject: [RELENG_5_2] Cardbus trouble Message-ID: <20031222220014.GA659@mobi.lestinsky.de>
next in thread | raw e-mail | index | archive | help
Hi, I just managed to bring my cardbus to life. Well sort of. There is one Problem left: Cards are not properly detected. When booting with an inserted card, they are gone from dmesg: cbb0: <RF5C476 PCI-CardBus Bridge> at device 3.0 on pci2 start (88000000) < sc->membase (e0200000) end (ffffffff) > sc->memlimit (e02fffff) cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib1: slot 3 INTA is routed to irq 10 cbb0: [MPSAFE] cbb1: <RF5C476 PCI-CardBus Bridge> at device 3.1 on pci2 start (88000000) < sc->membase (e0200000) end (ffffffff) > sc->memlimit (e02fffff) cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pcib1: slot 3 INTB is routed to irq 10 cbb1: [MPSAFE] ... cbb1: CardBus card activation failed pullig out the card (a Netgear WG511T, but the behavior is the same for other cards) and plugging it back: start (88000000) < sc->membase (e0200000) end (ffffffff) > sc->memlimit (e02fffff) start (88000000) < sc->membase (e0200000) end (ffffffff) > sc->memlimit (e02fffff) ath0: <Atheros 5212> mem 0x88010000-0x8801ffff irq 10 at device 0.0 on cardbus1 start (88010000) < sc->membase (e0200000) ath0: mac 5.6 phy 4.1 5ghz radio 4.5 ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: 802.11 address: 00:09:5b:89:f9:37 from now on I can pull the card and replug it as often as I want, it always works. Only the first time after booting it doesn't. The system is booting with "hw.pci.allow_unsupported_io_range=1" in /boot/loader.conf otherwise it wouldn't work at all. Thanks, Michael
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031222220014.GA659>