Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 23 Apr 2015 23:22:25 -0700
From:      Adrian Chadd <adrian@freebsd.org>
To:        Ben Woods <woodsb02@gmail.com>
Cc:        Joseph Mingrone <jrm@ftfl.ca>,  "freebsd-questions@freebsd.org" <freebsd-questions@freebsd.org>
Subject:   Re: CPU temperature rise after upgrade
Message-ID:  <CAJ-Vmon%2ByF=onOv-PC9dgV5NUUGsJ==fm_fjSja%2BVvHTSak_Jw@mail.gmail.com>
In-Reply-To: <CAOc73CDig5pr0xkDvMKBixreBT6agpGLbt5Onc88WP3O1vm6SA@mail.gmail.com>
References:  <86383qgoln.fsf@gly.ftfl.ca> <CAOc73CDig5pr0xkDvMKBixreBT6agpGLbt5Onc88WP3O1vm6SA@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
It's probably the graphics stack update (i915kms.)


-adrian

On 23 April 2015 at 22:51, Ben Woods <woodsb02@gmail.com> wrote:
> On Friday, April 24, 2015, Joseph Mingrone <jrm@ftfl.ca> wrote:
>
>> After upgrading to 10-STABLE (r281907) the baseline CPU temperature on
>> my Lenovo X220 has jumped by about 30 degrees Celsius.  Before today I
>> was also running 10-STABLE, but from a few months ago, and the
>> temperature usually remained in the 50s C unless I was compiling or
>> doing something else CPU intensive.  Now, the CPU starts at a normal
>> temperature range, but after a few minutes in Xorg, it starts to jump
>> into the 80s or 90s C and stays there even with the idle CPU percent
>> something like 99.7%.  Running top doesn't show anything out of the
>> ordinary.  The fans sound like they are fine.  They are spinning loudly
>> even when the CPU is throttled down to a low frequency.  The only
>> possible hint I can see is this message that appears periodically on the
>> console:
>>
>> error:[drm:pid1029:gen6_sanitize_pm] *ERROR* Power management
>> discrepancy: GEN6_RP_INTERRUPT_LIMITS expected 1a0d000, was 0000000.
>>
>> I'm not sure if I've seen that on the console before the upgrade.
>> Graphics performance doesn't seem any different than before.
>>
>> Thanks for any hints,
>>
>> Joseph
>>
>
>  If you haven't already, I recommend posting this query also on the
> freebsd-stable@freebsd.org mailing list.
>
> Regards,
> Ben
>
>
> --
>
> --
> From: Benjamin Woods
> woodsb02@gmail.com
> _______________________________________________
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-Vmon%2ByF=onOv-PC9dgV5NUUGsJ==fm_fjSja%2BVvHTSak_Jw>