Date: Wed, 17 Nov 2004 10:40:23 +0100 From: Krzysztof Kowalik <kkowalik@uci.agh.edu.pl> To: freebsd-stable@freebsd.org Subject: Performance issues in 5.3-RELEASE. Message-ID: <20041117094022.GA8682@uci.agh.edu.pl>
next in thread | raw e-mail | index | archive | help
--X1bOJ3K7DJ5YkBrT
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Hello,
Recently I took some time to upgrade my home 4.9 system to
5.3-RELEASE (fortunately, taking full system dump before, so I can
easily get back). In fact just after upgrading I ran into the weird
issue during installation for firefox port.
When firefox-1.0-source.tar.bz2 is getting untared, the system starts to
be *slow*: any music starts to be jittered and the cursor in X stalls
from time to time for ~1 second.
And I never had this issue before with 4.x serie.
I tried to boot with an without ACPI, with GENERIC kernel, with my "own"
kernel configuration (GENERIC with removed unused SCSI/RAID/NIC drivers)
both with and without PREEMPTION[1]. Without any visible change in system's
behaviour.
%uname -a
FreeBSD bzzzt.borys.lan 5.3-RELEASE FreeBSD 5.3-RELEASE #2: Wed Nov 17
00:19:56 CET 2004 root@bzzzt.borys.lan:/usr/src/sys/i386/compile/BZZZT i386
# atacontrol list
ATA channel 0:
Master: ad0 <SAMSUNG SP1614N/TM100-24> ATA/ATAPI revision 7
Slave: ad1 <WDC WD2000JB-00FUA0/15.05R15> ATA/ATAPI revision 6
ATA channel 1:
Master: acd0 <JLMS DVD-ROM LTD-166S/DS08> ATA/ATAPI revision 5
Slave: acd1 <LITE-ON LTR-40125S/ZS0N> ATA/ATAPI revision 0
ATA channel 2:
Master: ad4 <ST360021A/3.10> ATA/ATAPI revision 5
Slave: ad5 <ST380021A/3.19> ATA/ATAPI revision 5
ATA channel 3:
Master: no device present
Slave: no device present
# atacontrol mode 0
Master = UDMA100
Slave = UDMA100
# atacontrol mode 1
Master = UDMA33
Slave = UDMA33
# atacontrol mode 2
Master = UDMA100
Slave = UDMA100
dmesgs from ACPI boot on "custom" kernel attached.
Is there anything I missed and therefore I should try/tune or any
other informations that are needed and I missed them?
[1] yes, SCHED_4BSD
Regards,
Krzysztof Kowalik
--
As a computer, I find your faith in technology amusing.
--X1bOJ3K7DJ5YkBrT
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.boot"
Data TLB: 32 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory = 1073725440 (1023 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009cfff, 638976 bytes (156 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c26000 - 0x000000003edcbfff, 1041915904 bytes (254374 pages)
avail memory = 1041154048 (992 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f1e70
bios32: Entry = 0xf17b0 (c00f17b0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x17e0
pnpbios: Found PnP BIOS data at 0xc00f9a40
pnpbios: Entry = f0000:9a70 Rev = 1.0
pnpbios: OEM ID cd041
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 2
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: intr override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: intr override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: active-high
ioapic0 <Version 0.2> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00040010 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
null: <null device, zero device>
io: <I/O>
random: <entropy source, Software, Yarrow>
mem: <memory>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS A7V333> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80010014
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=30991106)
pcibios: BIOS version 2.10
Found $PIR table, 11 entries at 0xc00f1d90
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 5 A 0x02 3 4 5 7 9 10 11 12
embedded 0 5 B 0x03 3 4 5 7 9 10 11 12
embedded 0 6 A 0x05 3 4 5 7 9 10 11 12
embedded 0 7 A 0x02 3 4 5 7 9 10 11 12
slot 1 0 12 A 0x05 3 4 5 7 9 10 11 12
slot 1 0 12 B 0x01 3 4 5 7 9 10 11 12
slot 1 0 12 C 0x02 3 4 5 7 9 10 11 12
slot 1 0 12 D 0x03 3 4 5 7 9 10 11 12
slot 2 0 13 A 0x01 3 4 5 7 9 10 11 12
slot 2 0 13 B 0x02 3 4 5 7 9 10 11 12
slot 2 0 13 C 0x03 3 4 5 7 9 10 11 12
slot 2 0 13 D 0x05 3 4 5 7 9 10 11 12
slot 3 0 14 A 0x02 3 4 5 7 9 10 11 12
slot 3 0 14 B 0x03 3 4 5 7 9 10 11 12
slot 3 0 14 C 0x05 3 4 5 7 9 10 11 12
slot 3 0 14 D 0x01 3 4 5 7 9 10 11 12
slot 4 0 15 A 0x03 3 4 5 7 9 10 11 12
slot 4 0 15 B 0x05 3 4 5 7 9 10 11 12
slot 4 0 15 C 0x01 3 4 5 7 9 10 11 12
slot 4 0 15 D 0x02 3 4 5 7 9 10 11 12
slot 5 0 16 A 0x05 3 4 5 7 9 10 11 12
slot 5 0 16 B 0x01 3 4 5 7 9 10 11 12
slot 5 0 16 C 0x02 3 4 5 7 9 10 11 12
slot 5 0 16 D 0x03 3 4 5 7 9 10 11 12
slot 6 1 0 A 0x01 3 4 5 7 9 10 11 12
slot 6 1 0 B 0x02 3 4 5 7 9 10 11 12
embedded 0 17 D 0x06 3 4 5 7 9 10 11 12
embedded 0 9 A 0x05 3 4 5 7 9 10 11 12
embedded 0 9 B 0x01 3 4 5 7 9 10 11 12
embedded 0 9 C 0x02 3 4 5 7 9 10 11 12
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 17 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 17 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 17 func 2
acpi0: Power Button (fixed)
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base f0000000, size 27, enabled
found-> vendor=0x1106, dev=0x3099, revid=0x00
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0xb099, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 0000b800, size 3, enabled
map[14]: type 4, range 32, base 0000b400, size 2, enabled
map[18]: type 4, range 32, base 0000b000, size 3, enabled
map[1c]: type 4, range 32, base 0000a800, size 2, enabled
map[20]: type 4, range 32, base 0000a400, size 4, enabled
map[24]: type 1, range 32, base e6800000, size 14, enabled
pcib0: matched entry for 0.6.INTA
pcib0: slot 6 INTA hardwired to IRQ 19
found-> vendor=0x105a, dev=0x5275, revid=0x01
bus=0, slot=6, func=0
class=01-04-85, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0430, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0x12 (4500 ns)
intpin=a, irq=19
powerspec 1 supports D0 D1 D3 current D0
map[10]: type 1, range 32, base e6000000, size 11, enabled
map[14]: type 1, range 32, base e5800000, size 14, enabled
pcib0: matched entry for 0.7.INTA
pcib0: slot 7 INTA hardwired to IRQ 17
found-> vendor=0x104c, dev=0x8023, revid=0x00
bus=0, slot=7, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x23 (1050 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=17
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000a000, size 5, enabled
pcib0: matched entry for 0.9.INTA
pcib0: slot 9 INTA hardwired to IRQ 19
found-> vendor=0x1106, dev=0x3038, revid=0x50
bus=0, slot=9, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=19
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 00009800, size 5, enabled
pcib0: matched entry for 0.9.INTB
pcib0: slot 9 INTB hardwired to IRQ 16
found-> vendor=0x1106, dev=0x3038, revid=0x50
bus=0, slot=9, func=1
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=16
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base e5000000, size 8, enabled
pcib0: matched entry for 0.9.INTC
pcib0: slot 9 INTC hardwired to IRQ 17
found-> vendor=0x1106, dev=0x3104, revid=0x51
bus=0, slot=9, func=2
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=17
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00009400, size 5, enabled
pcib0: matched entry for 0.12.INTA
pcib0: slot 12 INTA hardwired to IRQ 19
found-> vendor=0x1102, dev=0x0002, revid=0x07
bus=0, slot=12, func=0
class=04-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x14 (5000 ns)
intpin=a, irq=19
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00009000, size 3, enabled
found-> vendor=0x1102, dev=0x7002, revid=0x07
bus=0, slot=12, func=1
class=09-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e4800000, size 12, enabled
map[14]: type 4, range 32, base 00008800, size 6, enabled
map[18]: type 1, range 32, base e4000000, size 20, enabled
pcib0: matched entry for 0.13.INTA
pcib0: slot 13 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x1229, revid=0x08
bus=0, slot=13, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=16
powerspec 2 supports D0 D1 D2 D3 current D0
found-> vendor=0x1106, dev=0x3147, revid=0x00
bus=0, slot=17, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 00008400, size 4, enabled
found-> vendor=0x1106, dev=0x0571, revid=0x06
bus=0, slot=17, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 00008000, size 5, enabled
pcib0: matched entry for 0.17.INTD
pcib0: slot 17 INTD hardwired to IRQ 21
found-> vendor=0x1106, dev=0x3038, revid=0x23
bus=0, slot=17, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=21
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 00007800, size 5, enabled
pcib0: matched entry for 0.17.INTD
pcib0: slot 17 INTD hardwired to IRQ 21
found-> vendor=0x1106, dev=0x3038, revid=0x23
bus=0, slot=17, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=21
powerspec 2 supports D0 D3 current D0
agp0: <VIA Generic host to PCI bridge> mem 0xf0000000-0xf7ffffff at device 0.0 on pci0
agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xf0000000
agp0: allocating GATT for aperture of size 256M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xd000-0xdfff
pcib1: memory decode 0xe7000000-0xe7dfffff
pcib1: prefetched decode 0xe7f00000-0xefffffff
ACPI PCI link initial configuration:
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 3, range 32, base e8000000, size 27, enabled
pcib1: device (null) requested decoded memory range 0xe8000000-0xefffffff
map[14]: type 4, range 32, base 0000d800, size 8, enabled
pcib1: device (null) requested decoded I/O range 0xd800-0xd8ff
map[18]: type 1, range 32, base e7000000, size 16, enabled
pcib1: device (null) requested decoded memory range 0xe7000000-0xe700ffff
pcib1: matched entry for 1.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 16
found-> vendor=0x1002, dev=0x5961, revid=0x01
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
powerspec 2 supports D0 D1 D2 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
atapci0: <Promise PDC20276 UDMA133 controller> port 0xa400-0xa40f,0xa800-0xa803,0xb000-0xb007,0xb400-0xb403,0xb800-0xb807 mem 0xe6800000-0xe6803fff irq 19 at device 6.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xa400
atapci0: [MPSAFE]
ata2: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xb800
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xb400
ata2: reset tp1 mask=03 ostat0=50 ostat1=50
ata2-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata2-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata2-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata2: [MPSAFE]
ata3: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xb000
atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0xa800
ata3: reset tp1 mask=03 ostat0=20 ostat1=30
ata3-master: stat=0x20 err=0x20 lsb=0x20 msb=0x20
ata3-slave: stat=0x30 err=0x30 lsb=0x30 msb=0x30
ata3: reset tp2 stat0=20 stat1=30 devices=0x0
ata3: [MPSAFE]
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xe5800000-0xe5803fff,0xe6000000-0xe60007ff irq 17 at device 7.0 on pci0
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xe6000000
fwohci0: [MPSAFE]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:18:00:00:08:e4:51
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:e0:18:08:e4:51
fwe0: bpf attached
fwe0: Ethernet address: 02:e0:18:08:e4:51
fwe0: if_start running deferred for Giant
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
uhci0: <VIA 83C572 USB controller> port 0xa000-0xa01f irq 19 at device 9.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xa000
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0x9800-0x981f irq 16 at device 9.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x9800
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xe5000000-0xe50000ff irq 17 at device 9.2 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xe5000000
ehci0: [GIANT-LOCKED]
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
usb2: EHCI version 0.95
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <VIA VT6202 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
emu10kx0: <Creative SBLive! 5.1 [SB0100]> port 0x9400-0x941f irq 19 at device 12.0 on pci0
emu10kx0: Reserved 0x20 bytes for rid 0x10 type 4 at 0x9400
emu10kx0: [MPSAFE]
emu10kx0: Card Configuration ( 0x00000215 )
emu10kx0: Card Configuration ( & 0xff000000 ) :
emu10kx0: Card Configuration ( & 0x00ff0000 ) :
emu10kx0: Card Configuration ( & 0x0000ff00 ) : [Joystick]
emu10kx0: Card Configuration ( & 0x000000ff ) : [AUTOMUTE] [LOCKTANKCACHE] [AUDIOENABLE]
pcm0: <EMU10Kx PCM Interface> on emu10kx0
emu10kx: setmap (3e8cc000, 800), nseg=1, error=0
emu10kx: setmap (3e8c4000, 1000), nseg=1, error=0
pcm0: <eMicro EM28028 AC97 Codec (id = 0x454d4328)>
pcm0: Codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, no 3D Stereo Enhancement
pcm0: Primary codec extended features surround DAC, AMAP
emu10kx: setmap (3e8bc000, 8000), nseg=1, error=0
emu10kx: setmap (3e8b4000, 8000), nseg=1, error=0
emu10kx: setmap (3e8ac000, 8000), nseg=1, error=0
emu10kx: setmap (3e8a4000, 8000), nseg=1, error=0
emu10kx: setmap (3e89c000, 8000), nseg=1, error=0
emu10kx: setmap (3e894000, 8000), nseg=1, error=0
emu10kx: setmap (3e88c000, 8000), nseg=1, error=0
emu10kx: setmap (3e884000, 8000), nseg=1, error=0
pcm0: sndbuf_setmap 3e87c000, 8000; 0xecf65000 -> 3e87c000
pci0: <input device> at device 12.1 (no driver attached)
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x8800-0x883f mem 0xe4000000-0xe40fffff,0xe4800000-0xe4800fff irq 16 at device 13.0 on pci0
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe4800000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1229 8086 000b 0008
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:03:47:de:b2:c2
fxp0: [MPSAFE]
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <VIA 8233A UDMA133 controller> port 0x8400-0x840f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 17.1 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x8400
ata0: channel #0 on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1-master: stat=0x90 err=0x01 lsb=0x14 msb=0xeb
ata1-master: stat=0x90 err=0x01 lsb=0x14 msb=0xeb
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: [MPSAFE]
uhci2: <VIA 83C572 USB controller> port 0x8000-0x801f irq 21 at device 17.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x8000
uhci2: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci2
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0x7800-0x781f irq 21 at device 17.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x7800
uhci3: [GIANT-LOCKED]
usb4: <VIA 83C572 USB controller> on uhci3
usb4: USB revision 1.0
uhub4: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
fdc0: <floppy drive controller> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: irq maps: 0xc4a1 0xc4b1 0xc4a1 0xc4a1
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: irq maps: 0xc4a1 0xc4a9 0xc4a1 0xc4a1
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model 4D Mouse, device ID 6-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:08, syncbits:00
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sc: sc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd87ff,0xc0000-0xccfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 27 7e 4f 4f 82 51 03
b8 1f 00 4f 0d 0e 00 00 07 80 90 03 8f 28 1f 8f
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 27 7e 4f 4f 82 51 03
b8 1f 00 4f 0d 0e 00 00 07 80 90 03 8f 28 1f 8f
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1668709796 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
ata0-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on VIA 8233A chip
ata0-master: setting UDMA100 on VIA 8233A chip
ata0-slave: setting PIO4 on VIA 8233A chip
ata0-slave: setting UDMA100 on VIA 8233A chip
ad0: <SAMSUNG SP1614N/TM100-24> ATA-7 disk at ata0-master
ad0: 152627MB (312581808 sectors), 310101 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ar: FreeBSD check1 failed
ad1: <WDC WD2000JB-00FUA0/15.05R15> ATA-6 disk at ata0-slave
ad1: 190782MB (390721968 sectors), 387621 C, 16 H, 63 S, 512 B
ad1: 16 secs/int, 1 depth queue, UDMA100
ar: FreeBSD check1 failed
ata1-slave: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata1-master: pio=0x0c wdma=0x22 udma=0x43 cable=40pin
ata1-master: setting PIO4 on VIA 8233A chip
ata1-master: DMA limited to UDMA33, non-ATA66 cable or device
ata1-master: setting UDMA33 on VIA 8233A chip
ata1-slave: setting PIO4 on VIA 8233A chip
ata1-slave: setting UDMA33 on VIA 8233A chip
acd0: <JLMS DVD-ROM LTD-166S/DS08> DVDROM drive at ata1 as master
acd0: read 8268KB/s (8268KB/s), 512KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
acd1: <LITE-ON LTR-40125S/ZS0N> CDRW drive at ata1 as slave
acd1: read 2406KB/s (8250KB/s) write 172KB/s (6875KB/s), 2048KB buffer, UDMA33
acd1: Reads: CDR, CDRW, CDDA stream, packet
acd1: Writes: CDR, CDRW, test write, burnproof
acd1: Audio: play, 255 volume levels
acd1: Mechanism: ejectable tray, unlocked
acd1: Medium: no/blank disc
ata2-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata2-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata2-master: setting PIO4 on Promise PDC20276 chip
ata2-master: setting UDMA100 on Promise PDC20276 chip
ata2-slave: setting PIO4 on Promise PDC20276 chip
ata2-slave: setting UDMA100 on Promise PDC20276 chip
ad4: <ST360021A/3.10> ATA-5 disk at ata2-master
ad4: 57241MB (117231408 sectors), 116301 C, 16 H, 63 S, 512 B
ad4: 16 secs/int, 1 depth queue, UDMA100
ad5: <ST380021A/3.19> ATA-5 disk at ata2-slave
ad5: 76319MB (156301488 sectors), 155061 C, 16 H, 63 S, 512 B
ad5: 16 secs/int, 1 depth queue, UDMA100
lun 0
magic_0 0x00000000
magic_1 0x00000000
flags 0x20104 20104<READY,SPAN>
total_disks 2
generation 2
width 1
heads 255
sectors 63
cylinders 7294
total_sectors 117187500
interleave 128
reserved 63
offset 0
disk 0: flags = 0x0b b<ONLINE,ASSIGNED,PRESENT>
ad4
sectors 117231345
disk 1: flags = 0x0b b<ONLINE,ASSIGNED,PRESENT>
ad5
sectors 156301425
ar0: 57220MB <ATA RAID1 array> [7294/255/63] status: READY subdisks:
disk0 READY on ad4 at ata2-master
disk1 READY on ad5 at ata2-slave
GEOM: new disk ad0
GEOM: new disk ad1
GEOM: new disk ad4
GEOM: new disk ad5
GEOM: new disk ar0
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:312576642
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 160039240704 end 160039272959
[0] f:00 typ:23 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:390716802
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad1s1, start 32256 length 200047002624 end 200047034879
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:117178047
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad4s1, start 32256 length 59995160064 end 59995192319
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:117178047
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad5s1, start 32256 length 59995160064 end 59995192319
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:117178047
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ar0s1, start 32256 length 59995160064 end 59995192319
GEOM: Configure ad0s1c, start 0 length 160039240704 end 160039240703
GEOM: Configure ad0s1e, start 0 length 160039240704 end 160039240703
GEOM: Configure ad4s1a, start 0 length 524288000 end 524287999
GEOM: Configure ad4s1b, start 10187964416 length 1048576000 end 11236540415
GEOM: Configure ad4s1c, start 0 length 59995160064 end 59995160063
GEOM: Configure ad4s1d, start 524288000 length 2147483648 end 2671771647
GEOM: Configure ad4s1e, start 2671771648 length 7516192768 end 10187964415
GEOM: Configure ad4s1f, start 11236540416 length 48758619648 end 59995160063
GEOM: Configure ad5s1a, start 0 length 524288000 end 524287999
GEOM: Configure ad5s1b, start 10187964416 length 1048576000 end 11236540415
GEOM: Configure ad5s1c, start 0 length 59995160064 end 59995160063
GEOM: Configure ad5s1d, start 524288000 length 2147483648 end 2671771647
GEOM: Configure ad5s1e, start 2671771648 length 7516192768 end 10187964415
GEOM: Configure ad5s1f, start 11236540416 length 48758619648 end 59995160063
GEOM: Configure ar0s1a, start 0 length 524288000 end 524287999
GEOM: Configure ar0s1b, start 10187964416 length 1048576000 end 11236540415
GEOM: Configure ar0s1c, start 0 length 59995160064 end 59995160063
GEOM: Configure ar0s1d, start 524288000 length 2147483648 end 2671771647
GEOM: Configure ar0s1e, start 2671771648 length 7516192768 end 10187964415
GEOM: Configure ar0s1f, start 11236540416 length 48758619648 end 59995160063
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0
ioapic0: routing intpin 7 (ISA IRQ 7) to cluster 0
ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0
ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 16 (PCI IRQ 16) to cluster 0
ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0
ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0
ioapic0: routing intpin 21 (PCI IRQ 21) to cluster 0
Mounting root from ufs:/dev/ar0s1a
start_init: trying /sbin/init
--X1bOJ3K7DJ5YkBrT
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.boot.nonverbose"
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE #2: Wed Nov 17 00:19:56 CET 2004
root@bzzzt.borys.lan:/usr/src/sys/i386/compile/BZZZT
ACPI APIC Table: <ASUS A7V333 >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(TM) XP 2000+ (1668.71-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory = 1073725440 (1023 MB)
avail memory = 1041154048 (992 MB)
ioapic0: Changing APIC ID to 2
ioapic0 <Version 0.2> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS A7V333> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA Generic host to PCI bridge> mem 0xf0000000-0xf7ffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
atapci0: <Promise PDC20276 UDMA133 controller> port 0xa400-0xa40f,0xa800-0xa803,0xb000-0xb007,0xb400-0xb403,0xb800-0xb807 mem 0xe6800000-0xe6803fff irq 19 at device 6.0 on pci0
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xe5800000-0xe5803fff,0xe6000000-0xe60007ff irq 17 at device 7.0 on pci0
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:18:00:00:08:e4:51
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:e0:18:08:e4:51
fwe0: Ethernet address: 02:e0:18:08:e4:51
fwe0: if_start running deferred for Giant
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
uhci0: <VIA 83C572 USB controller> port 0xa000-0xa01f irq 19 at device 9.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0x9800-0x981f irq 16 at device 9.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xe5000000-0xe50000ff irq 17 at device 9.2 on pci0
ehci0: [GIANT-LOCKED]
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
usb2: EHCI version 0.95
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <VIA VT6202 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
emu10kx0: <Creative SBLive! 5.1 [SB0100]> port 0x9400-0x941f irq 19 at device 12.0 on pci0
pcm0: <EMU10Kx PCM Interface> on emu10kx0
pcm0: <eMicro EM28028 AC97 Codec>
pci0: <input device> at device 12.1 (no driver attached)
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x8800-0x883f mem 0xe4000000-0xe40fffff,0xe4800000-0xe4800fff irq 16 at device 13.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:03:47:de:b2:c2
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <VIA 8233A UDMA133 controller> port 0x8400-0x840f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 17.1 on pci0
ata0: channel #0 on atapci1
ata1: channel #1 on atapci1
uhci2: <VIA 83C572 USB controller> port 0x8000-0x801f irq 21 at device 17.2 on pci0
uhci2: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci2
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0x7800-0x781f irq 21 at device 17.3 on pci0
uhci3: [GIANT-LOCKED]
usb4: <VIA 83C572 USB controller> on uhci3
usb4: USB revision 1.0
uhub4: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
fdc0: <floppy drive controller> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model 4D Mouse, device ID 6
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd87ff,0xc0000-0xccfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1668710005 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 152627MB <SAMSUNG SP1614N/TM100-24> [310101/16/63] at ata0-master UDMA100
ad1: 190782MB <WDC WD2000JB-00FUA0/15.05R15> [387621/16/63] at ata0-slave UDMA100
ata1-master: DMA limited to UDMA33, non-ATA66 cable or device
acd0: DVDROM <JLMS DVD-ROM LTD-166S/DS08> at ata1-master UDMA33
acd1: CDRW <LITE-ON LTR-40125S/ZS0N> at ata1-slave UDMA33
ad4: 57241MB <ST360021A/3.10> [116301/16/63] at ata2-master UDMA100
ad5: 76319MB <ST380021A/3.19> [155061/16/63] at ata2-slave UDMA100
ar0: 57220MB <ATA RAID1 array> [7294/255/63] status: READY subdisks:
disk0 READY on ad4 at ata2-master
disk1 READY on ad5 at ata2-slave
Mounting root from ufs:/dev/ar0s1a
--X1bOJ3K7DJ5YkBrT--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20041117094022.GA8682>