Date: Sun, 2 Sep 2001 13:01:56 -0700 (PDT) From: Pete Carah <pete@ns.altadena.net> To: current@freebsd.org Subject: Re: ACPI problems Message-ID: <200109022001.f82K1vo07551@ns.altadena.net>
next in thread | raw e-mail | index | archive | help
I have a panic that I haven't seen in the notes so far; if I allow load
of the acpi module, it gets a "can't allocate memory" very early in the
boot process.
Hopefully the following is complete - KDE2 cut-and-paste didn't work
as I expected for a big region.
Motherboard is ASUS A7V with 1.2G processor. DMESG (with old kernel
and without ACPI) follows:
----------------------------------------------------------
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Mon Aug 20 22:26:20 PDT 2001
root@seagull.altadena.net:/usr/src/sys/i386/compile/SEAGULL
Calibrating clock(s) ... TSC clock: 1208810099 Hz, i8254 clock: 1193250 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 1208750410 Hz
CPU: AMD Athlon(tm) Processor (1208.75-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
Data TLB: 24 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory = 805224448 (786352K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009dfff, 643072 bytes (157 pages)
0x003cf000 - 0x2ffe3fff, 801198080 bytes (195605 pages)
avail memory = 776478720 (758280K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f92a0
bios32: Entry = 0xf0f50 (c00f0f50) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x1150
pnpbios: Found PnP BIOS data at 0xc00fc2b0
pnpbios: Entry = f0000:c2e0 Rev = 1.0
pnpbios: OEM ID cd041
Other BIOS signatures found:
Preloaded elf kernel "kernel" at 0xc03a9000.
null: <null device, zero device>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
Using $PIR table, 9 entries at 0xc00f1720
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: physical bus=0
map[10]: type 3, range 32, base e6000000, size 25, enabled
found-> vendor=0x1106, dev=0x0305, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x8305, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
found-> vendor=0x1106, dev=0x0686, revid=0x40
bus=0, slot=4, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000d800, size 4, enabled
found-> vendor=0x1106, dev=0x0571, revid=0x06
bus=0, slot=4, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000d400, size 5, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x16
bus=0, slot=4, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
intpin=d, irq=5
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000d000, size 5, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x16
bus=0, slot=4, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
intpin=d, irq=5
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x3057, revid=0x40
bus=0, slot=4, func=4
class=06-00-00, hdrtype=0x00, mfdev=0
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base e1800000, size 12, enabled
map[14]: type 4, range 32, base 0000a400, size 6, enabled
map[18]: type 1, range 32, base e1000000, size 20, enabled
found-> vendor=0x8086, dev=0x1229, revid=0x08
bus=0, slot=9, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000a000, size 3, enabled
map[14]: type 4, range 32, base 00009800, size 2, enabled
map[18]: type 4, range 32, base 00009400, size 3, enabled
map[1c]: type 4, range 32, base 00009000, size 2, enabled
map[20]: type 4, range 32, base 00008800, size 6, enabled
map[24]: type 1, range 32, base e0800000, size 17, enabled
found-> vendor=0x105a, dev=0x0d30, revid=0x02
bus=0, slot=17, func=0
class=01-80-00, hdrtype=0x00, mfdev=0
intpin=a, irq=10
powerspec 1 supports D0 D3 current D0
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xe000-0xdfff
pcib1: memory decode 0xe2000000-0xe3cfffff
pcib1: prefetched decode 0xe3f00000-0xe5ffffff
pci1: physical bus=1
map[10]: type 1, range 32, base e2000000, size 24, enabled
map[14]: type 3, range 32, base e4000000, size 25, enabled
found-> vendor=0x10de, dev=0x002d, revid=0x15
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
powerspec 1 supports D0 D3 current D0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xd800-0xd80f at device 4.1 on pci0ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xd800
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI probe 00 00
ata0-slave: ATAPI probe 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA probe 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xd808
ata1: mask=01 ostat0=50 ostat2=ff
ata1-master: ATAPI probe 14 eb
ata1: mask=01 stat0=00 stat1=ff
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 5 at device 4.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 5 at device 4.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xa400-0xa43f mem 0xe1000000-0xe10fffff,0xe1800000-0xe1800fff irq 5 at device 9.0 on pci0
fxp0: using memory space register mapping
fxp0: Ethernet address 00:02:b3:04:16:c4
fxp0: PCI IDs: 8086 1229 8086 000c 0008
fxp0: Chip Type: 0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp0 attached
atapci1: <Promise ATA100 controller> port 0x8800-0x883f,0x9000-0x9003,0x9400-0x9407,0x9800-0x9803,0xa000-0xa007 mem 0xe0800000-0xe081ffff irq 10 at device 17.0 on pci0
ata-: ata2 already exists, using ata3 instead
ata2: iobase=0xa000 altiobase=0x9802 bmaddr=0x8800
ata2: mask=03 ostat0=50 ostat2=50
ata2-master: ATAPI probe 00 00
ata2-slave: ATAPI probe 00 00
ata2: mask=03 stat0=50 stat1=50
ata2-master: ATA probe 01 a5
ata2-slave: ATA probe 01 a5
ata2: devices=03
ata2: at 0xa000 on atapci1
ata3: iobase=0x9400 altiobase=0x9002 bmaddr=0x8808
ata3: mask=03 ostat0=7f ostat2=7f
ata3-master: ATAPI probe 7f 7f
ata3-slave: ATAPI probe 7f 7f
ata3: mask=03 stat0=7f stat1=7f
ata3-master: ATA probe 25 25
ata3-slave: ATA probe 25 25
ata3: devices=00
ata3: at 0x9400 on atapci1
ata-: ata0 already exists, using ata4 instead
ata-: ata1 already exists, using ata5 instead
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
pnpbios: 14 devices, largest 114 bytes
PNP0400: adding irq mask 0x80
PNP0400: adding io range 0x378-0x37f, size=0x8, align=0
PNP0400: adding io range 0x778-0x77f, size=0x8, align=0
PNP0400: end config
pnpbios: handle 0 device ID PNP0400 (0004d041)
PNP0501: adding irq mask 0x10
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
PNP0501: end config
pnpbios: handle 2 device ID PNP0501 (0105d041)
PNP0501: adding irq mask 0x8
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0
PNP0501: end config
pnpbios: handle 3 device ID PNP0501 (0105d041)
PNP0f13: adding irq mask 0x1000
PNP0f13: end config
pnpbios: handle 8 device ID PNP0f13 (130fd041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0x100000-0x2fffffff, size=0x2ff00000
PNP0c01: adding fixed memory32 range 0xe8000-0xeffff, size=0x8000
PNP0c01: adding fixed memory32 range 0xf0000-0xf3fff, size=0x4000
PNP0c01: adding fixed memory32 range 0xf4000-0xf7fff, size=0x4000
PNP0c01: adding fixed memory32 range 0xf8000-0xfffff, size=0x8000
PNP0c01: adding fixed memory32 range 0xd1000-0xd3fff, size=0x3000
PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000
PNP0c01: end config
pnpbios: handle 9 device ID PNP0c01 (010cd041)
PNP0000: adding irq mask 0x4
PNP0000: adding io range 0x20-0x21, size=0x2, align=0
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0
PNP0000: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0000: end config
pnpbios: handle 10 device ID PNP0000 (0000d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
PNP0100: end config
pnpbios: handle 11 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x75, size=0x6, align=0
PNP0b00: end config
pnpbios: handle 12 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
PNP0303: end config
pnpbios: handle 13 device ID PNP0303 (0303d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xf0, size=0x1, align=0
PNP0c04: end config
pnpbios: handle 14 device ID PNP0c04 (040cd041)
PNP0200: adding dma mask 0x10
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x80-0x90, size=0x11, align=0
PNP0200: adding io range 0x94-0x9f, size=0xc, align=0
PNP0200: adding io range 0xc0-0xde, size=0x1f, align=0
PNP0200: end config
pnpbios: handle 15 device ID PNP0200 (0002d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
PNP0800: end config
pnpbios: handle 16 device ID PNP0800 (0008d041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
PNP0a03: end config
pnpbios: handle 17 device ID PNP0a03 (030ad041)
PNP0c02: adding io range 0xe400-0xe47f, size=0x80, align=0
PNP0c02: adding io range 0xe800-0xe83f, size=0x40, align=0
PNP0c02: end config
pnpbios: handle 18 device ID PNP0c02 (020cd041)
sc-: sc0 already exists, using sc1 instead
vga-: vga0 already exists, using vga1 instead
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xcc000-0xcdfff,0xd0000-0xd0fff on isa0
adv0 failed to probe on isa0
aha0 failed to probe on isa0
aic0 failed to probe on isa0
ata4 failed to probe at port 0x1f0 irq 14 on isa0
ata5 failed to probe at port 0x170 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 4 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
bt0 failed to probe on isa0
cs0 failed to probe at port 0x300 on isa0
ed0 failed to probe at port 0x280 iomem 0xd8000 irq 10 on isa0
fdc0: direction bit not set
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fe0 failed to probe at port 0x300 on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
pmtimer0 failed to probe on isa0
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <12 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0 failed to probe at port 0x300 irq 10 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0 failed to probe on isa0
sc1: no video adapter found.
sc1: <System console> failed to probe on isa0
vga1: <Generic ISA VGA> failed to probe on isa0
isa_probe_children: probing PnP devices
unknown: <PNP0400> can't assign resources
unknown: <PNP0400> at port 0x378-0x37f on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x2f8-0x2ff on isa0
unknown: <PNP0f13> can't assign resources
unknown: <PNP0f13> at irq 12 on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0800> failed to probe at port 0x61 on isa0
BIOS Geometries:
0:03ff0f3f 0..1023=1024 cylinders, 0..15=16 heads, 1..63=63 sectors
1:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
2:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
IPv6 packet filtering initialized, unlimited logging
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, unlimited logging
bpf: faith0 attached
ad0: success setting UDMA4 on VIA chip
Creating DISK ad0
ad0: <Maxtor 92049U6/RA530JN0> ATA-5 disk at ata0-master
ad0: 19544MB (40026672 sectors), 39709 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA66
ad0: piomode=4 dmamode=2 udmamode=4 cblid=1
ad4: success setting UDMA4 on Promise chip
Creating DISK ad4
Promise check1 failed
ad4: <Maxtor 94098U8/FA500860> ATA-5 disk at ata2-master
ad4: 39082MB (80041248 sectors), 79406 C, 16 H, 63 S, 512 B
ad4: 16 secs/int, 1 depth queue, UDMA66
ad4: piomode=4 dmamode=2 udmamode=4 cblid=1
ad5: success setting UDMA4 on Promise chip
Creating DISK ad5
Promise check1 failed
ad5: <Maxtor 94098U8/FA500S60> ATA-5 disk at ata2-slave
ad5: 39082MB (80041248 sectors), 79406 C, 16 H, 63 S, 512 B
ad5: 16 secs/int, 1 depth queue, UDMA66
ad5: piomode=4 dmamode=2 udmamode=4 cblid=1
ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <PLEXTOR CD-R PX-W8432T/1.00> CD-RW drive at ata1 as master
acd0: read 5512KB/s (3271KB/s) write 1377KB/s (1377KB/s), 2048KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Writes: CD-R, CD-RW, test write
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable trayacd0: Medium: CD-ROM unknown, unlocked
Mounting root from ufs:/dev/ad0s1a
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
start_init: trying /sbin/init
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad4s1: type 0xa5, start 63, end = 80035829, size 80035767 : OK
ad5s1: type 0xa5, start 63, end = 80035829, size 80035767 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
splash: image decoder found: snake_saver
Linux ELF exec handler installed
--------------------
-- Pete
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200109022001.f82K1vo07551>