Date: Thu, 28 Oct 1999 22:55:56 -0700 From: Randy Bush <randy@psg.com> To: FreeBSD Current <freebsd-current@freebsd.org> Subject: -stable to -current Message-ID: <E11h512-0000Dz-00@rip.psg.com>
next in thread | raw e-mail | index | archive | help
trying to take a system from stable to current. o cvsup current o try makeworld but get cc -c -O -pipe -I/usr/src/gnu/lib/libgcc/../../../contrib/egcs/gcc/config -I/usr/src/gnu/lib/libgcc/../../../contrib/egcs/gcc -I. -fexceptions -DIN_GCC -I/usr/obj/usr/src/tmp/usr/include -DL_ashrsi3 -o _ashrsi3.o /usr/src/gnu/lib/libgcc/../../../contrib/egcs/gcc/libgcc1.c *** Error code 140 *** Error code 140 *** Error code 140 *** Error code 140 *** Error code 140 *** Error code 140 cc -c -O -pipe -I/usr/src/gnu/lib/libgcc/../../../contrib/egcs/gcc/config -I/usr/src/gnu/lib/libgcc/../../../contrib/egcs/gcc -I. -fexceptions -DIN_GCC -I/usr/obj/usr/src/tmp/usr/include -DL_ashlsi3 -o _ashlsi3.o /usr/src/gnu/lib/libgcc/../../../contrib/egcs/gcc/libgcc1.c Bad system call - core dumped *** Error code 140 Bad system call - core dumped *** Error code 140 o so build -current binary for config o update kernel config file to -current o config a -current kernel o make a -current kernel o install -current kernel o reboot o crash in init after configuring network, but was too fast to capture o but i think that the last line of the boot tells the story, see below so what's the upgrade path? randy Copyright (c) 1992-1999 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-CURRENT #0: Thu Oct 28 22:40:51 PDT 1999 root@rip.psg.com:/usr/src/sys/compile/RIP Timecounter "i8254" frequency 1193182 Hz CPU: Pentium II/Xeon/Celeron (300.68-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x651 Stepping = 1 Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 134205440 (131060K bytes) avail memory = 127012864 (124036K bytes) Programming 24 pins in IOAPIC #0 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 Preloaded elf kernel "kernel" at 0xc02e6000. Pentium Pro MTRR support enabled ccd0-5: Concatenated disk drivers npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 vga-pci0: <Matrox model 051f graphics accelerator> irq 16 at device 0.0 on pci1 isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0 isa0: unexpected tag 14 isa0: <ISA bus> on isab0 chip1: <Intel PIIX4 IDE controller> at device 4.1 on pci0 chip2: <UHCI USB controller> irq 19 at device 4.2 on pci0 Timecounter "PIIX" frequency 3579545 Hz chip3: <Intel 82371AB Power management controller> at device 4.3 on pci0 ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> irq 19 at device 6.0 on pci0 ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs fxp0: <Intel EtherExpress Pro 10/100B Ethernet> irq 19 at device 9.0 on pci0 fxp0: Ethernet address 00:a0:c9:df:c8:4e pci0: unknown card (vendor=0x109e, dev=0x036e) at 10.0 irq 18 pci0: unknown card (vendor=0x109e, dev=0x0878) at 10.1 irq 18 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A wl0 at port 0x300-0x30f irq 7 on isa0 wl0: address 08:00:6a:2b:dd:cb, NWID 0xaaaa pcm0: <Creative AWE64 PnP> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,5 on isa0 unknown0: <Game> at port 0x200-0x207 on isa0 unknown1: <WaveTable> at port 0x620-0x623 on isa0 APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via pin 2 wl0 XXX: driver didn't set ifq_maxlen Waiting 5 seconds for SCSI devices to settle SMP: AP CPU #1 Launched! Creating DISK da0 Creating DISK da1 sa0 at ahc0 bus 0 target 6 lun 0 sa0: <DEC DLT2000 8B37> Removable Sequential Access SCSI-2 device sa0: 5.000MB/s transfers (5.000MHz, offset 15) Creating DISK cd0 Creating DISK cd1 changing root device to da0s1a da0 at ahc0 bus 0 target 0 lun 0 da0: <SEAGATE ST34573LW 5702> Fixed Direct Access SCSI-2 device da0: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled da0: 4340MB (8888924 512 byte sectors: 255H 63S/T 553C) da1 at ahc0 bus 0 target 1 lun 0 da1: <SEAGATE ST34573LW 5702> Fixed Direct Access SCSI-2 device da1: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled da1: 4340MB (8888924 512 byte sectors: 255H 63S/T 553C) cd0 at ahc0 bus 0 target 4 lun 0 cd0: <TEAC CD-ROM CD-532S 1.0A> Removable CD-ROM SCSI-2 device cd0: 20.000MB/s transfers (20.000MHz, offset 16) cd0: Attempt to query device size failed: NOT READY, Medium not present cd1 at ahc0 bus 0 target 5 lun 0 cd1: <YAMAHA CRW4416S 1.0f> Removable CD-ROM SCSI-2 device cd1: 8.333MB/s transfers (8.333MHz, offset 31) cd1: cd present [140956 x 2048 byte records] link_elf: symbol curproc undefined To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E11h512-0000Dz-00>