Date: Tue, 18 Apr 2006 12:48:06 +0200 From: guru@Sisis.de To: Torfinn Ingolfsen <torfinn.ingolfsen@broadpark.no> Cc: freebsd-multimedia@freebsd.org Subject: Re: pwcbsd port - for Philips webcams Message-ID: <20060418104806.GA5911@rebelion.Sisis.de> In-Reply-To: <20060415152954.4247dbb3.torfinn.ingolfsen@broadpark.no> References: <20060415152954.4247dbb3.torfinn.ingolfsen@broadpark.no>
next in thread | previous in thread | raw e-mail | index | archive | help
El día Saturday, April 15, 2006 a las 03:29:54PM +0200, Torfinn Ingolfsen escribió: > FYI, for owners of Philips webcams (and a few others): > http://www.freebsd.org/cgi/query-pr.cgi?pr=ports/93464 > List of supported cameras: http://raaf.atspace.org/ > > apogologies to those who have seen it already. > -- > Regards, > Torfinn Ingolfsen, > Norway Hi Torfinn, Thx for the information and the patch. I've fetched the port from the given URL and had to edit the shell archive, because the browser (lynx) removed the TABs in the Makefile and inserted blanks. I only say this to tell you that perhaps the port should be placed some where as a tar file. The page http://raaf.atspace.org/ says that actual version is pwcbsd-1.2.tar.gz while the port fetches some older version (1.0). My cam (LogiTech vendor 0x046d device 0x08f0) is not supported: # usbdevs -v Controller /dev/usb0: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000) , rev 1.00 port 1 addr 2: full speed, power 100 mA, config 1, Camera(0x08f0), vendor 0x046 d(0x046d), rev 1.00 port 2 powered ... Any chance in the future or should I buy some other item? Thx again matthias -- Matthias Apitz / Sisis Informationssysteme GmbH ein Tochterunternehmen der OCLC PICA B.V. Leiden (NL) D-82041 Oberhaching, Gruenwalder Weg 28g Fon: +49 89 / 61308-351, Fax: -399, Mobile +49 170 4527211 http://www.sisis.de/~guru/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060418104806.GA5911>