Date: Mon, 13 Apr 2009 19:02:22 -0400 From: John Nielsen <lists@jnielsen.net> To: freebsd-x11@freebsd.org Subject: r128 dual-head error Message-ID: <200904131902.22584.lists@jnielsen.net>
next in thread | raw e-mail | index | archive | help
I'm trying to get dual-head + Xinerama going on a Dell Inspiron 4000 laptop= =20 so I can use both the integrated flat panel and an external CRT. =46rom what I can tell I have my xorg.conf configured properly and it's try= ing=20 to do the right thing but it's throwing an error when initializing the=20 secondary screen: (EE) R128(1): Unable to map MMIO aperture. Invalid argument (22) How should I go about troubleshooting this? The laptop is running recent 7-STABLE with mostly up-to-date ports. (I'll=20 post again if anything changes after the current update run completes.) Ful= l=20 xorg.conf and log output below. Any pointers or advice appreciated. JN =3D=3D=3D=3D=3D xorg.conf =3D=3D=3D=3D=3D Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" Option "Xinerama" "true" EndSection Section "Extensions" Option "Composite" "Enable" EndSection Section "Files" ModulePath "/usr/local/lib/xorg/modules" FontPath "/usr/local/lib/X11/fonts/misc/" FontPath "/usr/local/lib/X11/fonts/local/" FontPath "/usr/local/lib/X11/fonts/TTF/" FontPath "/usr/local/lib/X11/fonts/OTF" FontPath "/usr/local/lib/X11/fonts/Type1/" FontPath "/usr/local/lib/X11/fonts/75dpi/" FontPath "/usr/local/lib/X11/fonts/100dpi/" FontPath "/usr/local/lib/X11/fonts/URW/" FontPath "/usr/local/lib/X11/fonts/bitstream-vera/" FontPath "/usr/local/lib/X11/fonts/cyrillic/" FontPath "/usr/local/lib/X11/fonts/mozilla/" FontPath "/usr/local/lib/X11/fonts/freefont/" FontPath "/usr/local/lib/X11/fonts/webfonts/" FontPath "/usr/local/lib/X11/fonts/terminus-font/" FontPath "/usr/local/lib/X11/fonts/artwiz-fonts/" FontPath "/usr/local/lib/X11/fonts/winTTF/" FontPath "/usr/local/share/fonts/cmpsfont/type1/" FontPath "/usr/local/share/fonts/amspsfont/type1/" FontPath "/usr/local/share/ghostscript/fonts/" FontPath "/usr/local/diablo-jdk1.6.0/jre/lib/fonts/" EndSection Section "Module" Load "extmod" Load "glx" Load "GLcore" Load "dri" Load "dbe" Load "record" Load "xtrap" Load "freetype" Load "bitmap" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" VertRefresh 53-65 HorizSync 30-90 DisplaySize 308 231 Option "DPMS" EndSection Section "Monitor" #DisplaySize 320 240 # mm Identifier "Monitor1" VendorName "DEL" ModelName "DELL E770s" HorizSync 30.0 - 70.0 VertRefresh 50.0 - 160.0 Option "DPMS" EndSection Section "Device" Identifier "Card0" Driver "r128" Option "Display" "FP" VendorName "ATI Technologies Inc" BoardName "Rage Mobility M3 AGP 2x" BusID "PCI:1:0:0" Screen 0 EndSection Section "Device" Identifier "Card1" Driver "r128" Option "Display" "CRT" VendorName "ATI Technologies Inc" BoardName "Rage Mobility M3 AGP 2x" BusID "PCI:1:0:0" Screen 1 EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Card1" Monitor "Monitor1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection =3D=3D=3D=3D=3D Xorg.0.log =3D=3D=3D=3D=3D _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6 _XSERVTransOpen: transport open failed for inet6/insp.local:0 _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6 X.Org X Server 1.5.3 Release Date: 5 November 2008 X Protocol Version 11, Revision 0 Build Operating System: FreeBSD 7.1-STABLE i386=20 Current Operating System: FreeBSD insp.local 7.2-PRERELEASE FreeBSD 7.2- PRERELEASE #0: Mon Apr 13 16:43:30 EDT 2009 =20 root@insp.local:/usr/obj/usr/src/sys/INSP i386 Build Date: 09 March 2009 02:21:30AM =20 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (=3D=3D) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (=3D=3D) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 13 18:44:37 2009 (=3D=3D) Using config file: "/etc/X11/xorg.conf" (=3D=3D) ServerLayout "X.org Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Card0" (**) |-->Screen "Screen1" (1) (**) | |-->Monitor "Monitor1" (**) | |-->Device "Card1" (**) Option "Xinerama" "true" (=3D=3D) Automatically adding devices (=3D=3D) Automatically enabling devices (**) Xinerama: enabled (=3D=3D) Including the default font path=20 /usr/local/lib/X11/fonts/misc/,/usr/local/lib/X11/fonts/TTF/,/usr/local/lib= /X11/fonts/OTF,/usr/local/lib/X11/fonts/Type1/,/usr/local/lib/X11/fonts/100= dpi/,/usr/local/lib/X11/fonts/75dpi/. (**) FontPath set to: /usr/local/lib/X11/fonts/misc/, /usr/local/lib/X11/fonts/local/, /usr/local/lib/X11/fonts/TTF/, /usr/local/lib/X11/fonts/OTF, /usr/local/lib/X11/fonts/Type1/, /usr/local/lib/X11/fonts/75dpi/, /usr/local/lib/X11/fonts/100dpi/, /usr/local/lib/X11/fonts/URW/, /usr/local/lib/X11/fonts/bitstream-vera/, /usr/local/lib/X11/fonts/cyrillic/, /usr/local/lib/X11/fonts/mozilla/, /usr/local/lib/X11/fonts/freefont/, /usr/local/lib/X11/fonts/webfonts/, /usr/local/lib/X11/fonts/terminus-font/, /usr/local/lib/X11/fonts/artwiz-fonts/, /usr/local/lib/X11/fonts/winTTF/, /usr/local/share/fonts/cmpsfont/type1/, /usr/local/share/fonts/amspsfont/type1/, /usr/local/share/ghostscript/fonts/, /usr/local/diablo-jdk1.6.0/jre/lib/fonts/, /usr/local/lib/X11/fonts/misc/, /usr/local/lib/X11/fonts/TTF/, /usr/local/lib/X11/fonts/OTF, /usr/local/lib/X11/fonts/Type1/, /usr/local/lib/X11/fonts/100dpi/, /usr/local/lib/X11/fonts/75dpi/ (**) ModulePath set to "/usr/local/lib/xorg/modules" (**) Extension "Composite" is enabled (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AllowEmptyInput. (II) Loader magic: 0x81bede0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 4.1 X.Org XInput driver : 2.1 X.Org Server Extension : 1.1 X.Org Font Renderer : 0.6 (II) Loader running on freebsd (--) Using syscons driver with X support (version 2.0) (--) using VT number 8 (--) PCI:*(0@1:0:0) ATI Technologies Inc Rage Mobility M3 AGP 2x rev 2, Mem= =20 @ 0xf8000000/0, 0xfdffc000/0, I/O @ 0x0000ec00/0, BIOS @ 0x????????/65536 (II) System resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) "extmod" will be loaded. This was enabled by default and also specifie= d=20 in the config file. (II) "dbe" will be loaded. This was enabled by default and also specified i= n=20 the config file. (II) "glx" will be loaded. This was enabled by default and also specified i= n=20 the config file. (II) "freetype" will be loaded. This was enabled by default and also=20 specified in the config file. (II) "record" will be loaded. This was enabled by default and also specifie= d=20 in the config file. (II) "dri" will be loaded. This was enabled by default and also specified i= n=20 the config file. (II) LoadModule: "extmod" (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor=3D"X.Org Foundation" compiled for 1.5.3, module version =3D 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.1 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "glx" (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor=3D"X.Org Foundation" compiled for 1.5.3, module version =3D 1.0.0 ABI class: X.Org Server Extension, version 1.1 (=3D=3D) AIGLX disabled (=3D=3D) Exporting typical set of GLX visuals (II) Loading extension GLX (II) LoadModule: "dri" (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor=3D"X.Org Foundation" compiled for 1.5.3, module version =3D 1.0.0 ABI class: X.Org Server Extension, version 1.1 (II) Loading extension XFree86-DRI (II) LoadModule: "dbe" (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor=3D"X.Org Foundation" compiled for 1.5.3, module version =3D 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.1 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "record" (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor=3D"X.Org Foundation" compiled for 1.5.3, module version =3D 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.1 (II) Loading extension RECORD (II) LoadModule: "xtrap" (II) Loading /usr/local/lib/xorg/modules/extensions//libxtrap.so (II) Module xtrap: vendor=3D"X.Org Foundation" compiled for 1.5.3, module version =3D 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.1 (II) Loading extension DEC-XTRAP (II) LoadModule: "freetype" (II) Loading /usr/local/lib/xorg/modules/fonts//libfreetype.so (II) Module freetype: vendor=3D"X.Org Foundation & the After X-TT Project" compiled for 1.5.3, module version =3D 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.6 (II) Loading font FreeType (II) LoadModule: "r128" (II) Loading /usr/local/lib/xorg/modules/drivers//r128_drv.so (II) Module r128: vendor=3D"X.Org Foundation" compiled for 1.5.3, module version =3D 6.8.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 4.1 (II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP), ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP), ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP), ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI), ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP), ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP), ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP), ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP), ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP), ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI), ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI), ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP), ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP), ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP), ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI), ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP), ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP), ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP), ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP), ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP), ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP), ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?), ATI Rage 128 Pro ULTRA TU (AGP?) (II) Primary Device is: PCI 01@00:00:0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) resource ranges after probing: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Setting vga for screen 1. (II) R128(0): PCI bus 1 card 0 func 0 (**) R128(0): Depth 24, (--) framebuffer bpp 32 (II) R128(0): Pixel depth =3D 24 bits stored in 4 bytes (32 bpp pixmaps) (=3D=3D) R128(0): Default visual is TrueColor (**) R128(0): Option "Display" "FP" (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/local/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor=3D"X.Org Foundation" compiled for 1.5.3, module version =3D 0.1.0 ABI class: X.Org Video Driver, version 4.1 (II) R128(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is=20 0x0000 (=3D=3D) R128(0): RGB weight 888 (II) R128(0): Using 8 bits per RGB (8 bit DAC) (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/local/lib/xorg/modules//libint10.so (II) Module int10: vendor=3D"X.Org Foundation" compiled for 1.5.3, module version =3D 1.0.0 ABI class: X.Org Video Driver, version 4.1 (II) R128(0): initializing int10 (=3D=3D) R128(0): Write-combining range (0xa0000,0x20000) was already clear (=3D=3D) R128(0): Write-combining range (0xc0000,0x40000) was already clear (II) R128(0): Primary V_BIOS segment is: 0xc000 (=3D=3D) R128(0): Write-combining range (0x0,0x1000) was already clear (--) R128(0): Chipset: "ATI Rage 128 Mobility M3 LF (AGP)" (ChipID =3D 0x4c= 46) (--) R128(0): Linear framebuffer at 0xf8000000 (--) R128(0): MMIO registers at 0xfdffc000 (--) R128(0): VideoRAM: 8192 kByte (128-bit SDR SGRAM 1:1) (II) R128(0): Using 4096k of videoram for primary head (**) R128(0): Dual display (II) R128(0): Primary Display =3D=3D Type 2 (II) R128(0): Panel size: 1024x768 (II) R128(0): Panel ID: Samsung LT141X8-L02 =20 (II) R128(0): Panel Type: Color, Single, TFT (II) R128(0): Panel Interface: LVDS (II) R128(0): PLL parameters: rf=3D2700 rd=3D12 min=3D12000 max=3D27000; xc= lk=3D10500 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/local/lib/xorg/modules//libvbe.so (II) Module vbe: vendor=3D"X.Org Foundation" compiled for 1.5.3, module version =3D 1.1.0 ABI class: X.Org Video Driver, version 4.1 (II) R128(0): VESA BIOS detected (II) R128(0): VESA VBE Version 2.0 (II) R128(0): VESA VBE Total Mem: 8192 kB (II) R128(0): VESA VBE OEM: ATI MOBILE M3 (II) R128(0): VESA VBE OEM Software Rev: 1.0 (II) R128(0): VESA VBE OEM Vendor: ATI Technologies Inc. (II) R128(0): VESA VBE OEM Product: M3 =20 (II) R128(0): VESA VBE OEM Product Rev: 01.00 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) R128(0): VESA VBE DDC supported (II) R128(0): VESA VBE DDC Level 2 (II) R128(0): VESA VBE DDC transfer in appr. 2 sec. (II) R128(0): VESA VBE DDC read successfully (II) R128(0): Manufacturer: DEL Model: 300a Serial#: 1110725204 (II) R128(0): Year: 2000 Week: 37 (II) R128(0): EDID Version: 1.2 (II) R128(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V (II) R128(0): Sync: Separate (II) R128(0): Max Image Size [cm]: horiz.: 32 vert.: 24 (II) R128(0): Gamma: 2.26 (II) R128(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) R128(0): First detailed timing is preferred mode (II) R128(0): redX: 0.645 redY: 0.321 greenX: 0.285 greenY: 0.600 (II) R128(0): blueX: 0.142 blueY: 0.057 whiteX: 0.281 whiteY: 0.311 (II) R128(0): Supported VESA Video Modes: (II) R128(0): 720x400@70Hz (II) R128(0): 640x480@60Hz (II) R128(0): 640x480@75Hz (II) R128(0): 800x600@60Hz (II) R128(0): 800x600@75Hz (II) R128(0): 1024x768@60Hz (II) R128(0): 1024x768@75Hz (II) R128(0): Manufacturer's mask: 0 (II) R128(0): Supported Future Video Modes: (II) R128(0): #0: hsize: 1024 vsize 768 refresh: 85 vid: 22881 (II) R128(0): #1: hsize: 640 vsize 480 refresh: 85 vid: 22833 (II) R128(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) R128(0): Supported additional Video Mode: (II) R128(0): clock: 94.5 MHz Image Size: 306 x 230 mm (II) R128(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 137= 6=20 h_border: 0 (II) R128(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808=20 v_border: 0 (II) R128(0): Serial No: 2010V09CB4RT (II) R128(0): Monitor name: DELL E770s (II) R128(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 70 kHz,=20 PixClock max 110 MHz (II) R128(0): EDID (in hex): (II) R128(0): 00ffffffffffff0010ac0a3054523442 (II) R128(0): 250a01026820187eea1262a552499924 (II) R128(0): 0e484fa54a0061593159818001010101 (II) R128(0): 010101010101ea240060410028303060 (II) R128(0): 130032e61000001e000000ff00323031 (II) R128(0): 3056303943423452540a000000fc0044 (II) R128(0): 454c4c2045373730730a2020000000fd (II) R128(0): 0032a01e460b000a20202020202000a7 (II) R128(0): EDID vendor "DEL", prod id 12298 (II) R128(0): Using hsync ranges from config file (II) R128(0): Using vrefresh ranges from config file (II) R128(0): Printing DDC gathered Modelines: (II) R128(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769= =20 772 808 +hsync +vsync (68.7 kHz) (II) R128(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605= =20 628 +hsync +vsync (37.9 kHz) (II) R128(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484= =20 500 -hsync -vsync (37.5 kHz) (II) R128(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492= =20 525 -hsync -vsync (31.5 kHz) (II) R128(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414= =20 449 -hsync +vsync (31.5 kHz) (II) R128(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769= =20 772 800 +hsync +vsync (60.1 kHz) (II) R128(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771= =20 777 806 -hsync -vsync (48.4 kHz) (II) R128(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604= =20 625 +hsync +vsync (46.9 kHz) (II) R128(0): Modeline "1024x768"x85.0 94.39 1024 1088 1200 1376 768 76= 9=20 772 807 -hsync +vsync (68.6 kHz) (II) R128(0): Modeline "640x480"x85.0 35.71 640 672 736 832 480 481 484= =20 505 -hsync +vsync (42.9 kHz) (II) R128(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024= =20 1025 1028 1060 -hsync +vsync (63.6 kHz) (=3D=3D) R128(0): Using gamma correction (1.0, 1.0, 1.0) (II) R128(0): Monitor0: Using hsync range of 30.00-90.00 kHz (II) R128(0): Monitor0: Using vrefresh range of 53.00-65.00 Hz (II) R128(0): Monitor0: Using maximum pixel clock of 110.00 MHz (II) R128(0): Estimated virtual size for aspect ratio 1.3333 is 1024x768 (II) R128(0): Clock range: 12.00 to 270.00 MHz (II) R128(0): Not using default mode "640x350" (vrefresh out of range) (II) R128(0): Not using default mode "320x175" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "640x400" (vrefresh out of range) (II) R128(0): Not using default mode "320x200" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "720x400" (no mode of this name) (II) R128(0): Not using default mode "360x200" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "320x240" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "640x480" (vrefresh out of range) (II) R128(0): Not using default mode "320x240" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "640x480" (vrefresh out of range) (II) R128(0): Not using default mode "320x240" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "640x480" (vrefresh out of range) (II) R128(0): Not using default mode "320x240" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "400x300" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "400x300" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "800x600" (vrefresh out of range) (II) R128(0): Not using default mode "400x300" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "800x600" (vrefresh out of range) (II) R128(0): Not using default mode "400x300" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "800x600" (vrefresh out of range) (II) R128(0): Not using default mode "400x300" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "1024x768" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "512x384" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "512x384" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "1024x768" (vrefresh out of range) (II) R128(0): Not using default mode "512x384" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "1024x768" (vrefresh out of range) (II) R128(0): Not using default mode "512x384" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "1024x768" (vrefresh out of range) (II) R128(0): Not using default mode "512x384" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "1152x864" (width too large for virtua= l=20 size) (II) R128(0): Not using default mode "576x432" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "1280x960" (insufficient memory for=20 mode) (II) R128(0): Not using default mode "640x480" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "1280x960" (insufficient memory for=20 mode) (II) R128(0): Not using default mode "640x480" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "1280x1024" (insufficient memory for=20 mode) (II) R128(0): Not using default mode "640x512" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "1280x1024" (insufficient memory for=20 mode) (II) R128(0): Not using default mode "640x512" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "1280x1024" (insufficient memory for=20 mode) (II) R128(0): Not using default mode "640x512" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "1600x1200" (insufficient memory for=20 mode) (II) R128(0): Not using default mode "800x600" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "1600x1200" (insufficient memory for=20 mode) (II) R128(0): Not using default mode "800x600" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "1600x1200" (insufficient memory for=20 mode) (II) R128(0): Not using default mode "800x600" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "1600x1200" (insufficient memory for=20 mode) (II) R128(0): Not using default mode "800x600" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "1600x1200" (insufficient memory for=20 mode) (II) R128(0): Not using default mode "800x600" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "1792x1344" (insufficient memory for=20 mode) (II) R128(0): Not using default mode "896x672" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "1792x1344" (insufficient memory for=20 mode) (II) R128(0): Not using default mode "896x672" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "1856x1392" (insufficient memory for=20 mode) (II) R128(0): Not using default mode "928x696" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "1856x1392" (insufficient memory for=20 mode) (II) R128(0): Not using default mode "928x696" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "1920x1440" (insufficient memory for=20 mode) (II) R128(0): Not using default mode "960x720" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "1920x1440" (insufficient memory for=20 mode) (II) R128(0): Not using default mode "960x720" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "832x624" (no mode of this name) (II) R128(0): Not using default mode "416x312" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "1400x1050" (insufficient memory for=20 mode) (II) R128(0): Not using default mode "700x525" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "1400x1050" (insufficient memory for=20 mode) (II) R128(0): Not using default mode "700x525" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "1920x1440" (insufficient memory for=20 mode) (II) R128(0): Not using default mode "960x720" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "2048x1536" (insufficient memory for=20 mode) (II) R128(0): Not using default mode "1024x768" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "2048x1536" (insufficient memory for=20 mode) (II) R128(0): Not using default mode "1024x768" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using default mode "2048x1536" (insufficient memory for=20 mode) (II) R128(0): Not using default mode "1024x768" (bad mode=20 clock/interlace/doublescan) (II) R128(0): Not using driver mode "1024x768" (vrefresh out of range) (II) R128(0): Not using driver mode "640x480" (vrefresh out of range) (II) R128(0): Not using driver mode "720x400" (no mode of this name) (II) R128(0): Not using driver mode "1024x768" (vrefresh out of range) (II) R128(0): Not using driver mode "800x600" (vrefresh out of range) (II) R128(0): Not using driver mode "1024x768" (vrefresh out of range) (II) R128(0): Not using driver mode "640x480" (vrefresh out of range) (II) R128(0): Not using driver mode "1280x1024" (insufficient memory for=20 mode) (II) R128(0): Modifying mode according to VBIOS: 1024x768 [pclk 65.0 MHz]=20 for FP to: 1024x768 [pclk 65.0 MHz] (II) R128(0): Modifying mode according to VBIOS: 1024x768 [pclk 65.0 MHz]=20 for FP to: 1024x768 [pclk 65.0 MHz] (II) R128(0): Modifying mode according to VBIOS: 800x600 [pclk 40.0 MHz] fo= r=20 =46P to: 800x600 [pclk 65.0 MHz] (II) R128(0): Modifying mode according to VBIOS: 800x600 [pclk 40.0 MHz] fo= r=20 =46P to: 800x600 [pclk 65.0 MHz] (II) R128(0): Modifying mode according to VBIOS: 800x600 [pclk 36.0 MHz] fo= r=20 =46P to: 800x600 [pclk 65.0 MHz] (II) R128(0): Modifying mode according to VBIOS: 640x480 [pclk 25.2 MHz] fo= r=20 =46P to: 640x480 [pclk 65.0 MHz] (II) R128(0): Modifying mode according to VBIOS: 640x480 [pclk 25.2 MHz] fo= r=20 =46P to: 640x480 [pclk 65.0 MHz] (--) R128(0): Virtual size is 1024x768 (pitch 1024) (**) R128(0): *Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz (II) R128(0): Modeline "1024x768"x60.0 65.00 1024 1048 1065 1344 768 77= 0=20 776 806 -hsync -vsync (48.4 kHz) (**) R128(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz (II) R128(0): Modeline "1024x768"x60.0 65.00 1024 1048 1065 1344 768 77= 0=20 776 806 -hsync -vsync (48.4 kHz) (**) R128(0): *Driver mode "800x600": 65.0 MHz (scaled from 40.0 MHz), 37.9= =20 kHz, 60.3 Hz (II) R128(0): Modeline "800x600"x60.3 65.00 800 824 841 1120 600 602 60= 8=20 638 +hsync +vsync (37.9 kHz) (**) R128(0): *Default mode "800x600": 65.0 MHz (scaled from 40.0 MHz), 37.= 9=20 kHz, 60.3 Hz (II) R128(0): Modeline "800x600"x60.3 65.00 800 824 841 1120 600 602 60= 8=20 638 +hsync +vsync (37.9 kHz) (**) R128(0): *Default mode "800x600": 65.0 MHz (scaled from 36.0 MHz), 35.= 2=20 kHz, 56.2 Hz (II) R128(0): Modeline "800x600"x56.2 65.00 800 824 841 1120 600 602 60= 8=20 638 +hsync +vsync (35.2 kHz) (**) R128(0): *Driver mode "640x480": 65.0 MHz (scaled from 25.2 MHz), 31.5= =20 kHz, 60.0 Hz (II) R128(0): Modeline "640x480"x60.0 65.00 640 664 681 960 480 482 488= =20 518 -hsync -vsync (31.5 kHz) (**) R128(0): *Default mode "640x480": 65.0 MHz (scaled from 25.2 MHz), 31.= 5=20 kHz, 59.9 Hz (II) R128(0): Modeline "640x480"x59.9 65.00 640 664 681 960 480 482 488= =20 518 -hsync -vsync (31.5 kHz) (**) R128(0): Display dimensions: (308, 231) mm (WW) R128(0): Probed monitor is 320x240 mm, using Displaysize 308x231 mm (**) R128(0): DPI set to (84, 84) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/local/lib/xorg/modules//libfb.so (II) Module fb: vendor=3D"X.Org Foundation" compiled for 1.5.3, module version =3D 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/local/lib/xorg/modules//libxaa.so (II) Module xaa: vendor=3D"X.Org Foundation" compiled for 1.5.3, module version =3D 1.2.0 ABI class: X.Org Video Driver, version 4.1 (II) Loading sub module "shadowfb" (II) LoadModule: "shadowfb" (II) Loading /usr/local/lib/xorg/modules//libshadowfb.so (II) Module shadowfb: vendor=3D"X.Org Foundation" compiled for 1.5.3, module version =3D 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) R128(0): Page flipping disabled (=3D=3D) R128(0): Write-combining range (0x0,0x1000) was already clear (!!) R128(0): For information on using the multimedia capabilities of this adapter, please see http://gatos.sf.net. (II) R128(1): PCI bus 1 card 0 func 0 (**) R128(1): Depth 24, (--) framebuffer bpp 32 (II) R128(1): Pixel depth =3D 24 bits stored in 4 bytes (32 bpp pixmaps) (=3D=3D) R128(1): Default visual is TrueColor (**) R128(1): Option "Display" "CRT" (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Reloading /usr/local/lib/xorg/modules//libvgahw.so (II) R128(1): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is=20 0x0000 (=3D=3D) R128(1): RGB weight 888 (II) R128(1): Using 8 bits per RGB (8 bit DAC) (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/local/lib/xorg/modules//libint10.so (II) R128(1): initializing int10 (=3D=3D) R128(0): Write-combining range (0xa0000,0x20000) was already clear (II) R128(0): Primary V_BIOS segment is: 0xc000 (=3D=3D) R128(0): Write-combining range (0x0,0x1000) was already clear (--) R128(1): Chipset: "ATI Rage 128 Mobility M3 LF (AGP)" (ChipID =3D 0x4c= 46) (--) R128(1): Linear framebuffer at 0xf8000000 (--) R128(1): MMIO registers at 0xfdffc000 (--) R128(1): VideoRAM: 8192 kByte (128-bit SDR SGRAM 1:1) (II) R128(1): Using 4096k of videoram for secondary head (**) R128(1): Dual display (II) R128(1): Secondary Display =3D=3D Type 1 (WW) R128(1): Can't determine panel dimensions, and none specified. Disabling programming of FP registers. (II) R128(1): PLL parameters: rf=3D2700 rd=3D12 min=3D12000 max=3D27000; xc= lk=3D10500 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Reloading /usr/local/lib/xorg/modules//libvbe.so (II) R128(0): VESA BIOS detected (II) R128(0): VESA VBE Version 2.0 (II) R128(0): VESA VBE Total Mem: 8192 kB (II) R128(0): VESA VBE OEM: ATI MOBILE M3 (II) R128(0): VESA VBE OEM Software Rev: 1.0 (II) R128(0): VESA VBE OEM Vendor: ATI Technologies Inc. (II) R128(0): VESA VBE OEM Product: M3 =20 (II) R128(0): VESA VBE OEM Product Rev: 01.00 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) R128(0): VESA VBE DDC supported (II) R128(0): VESA VBE DDC Level 2 (II) R128(0): VESA VBE DDC transfer in appr. 2 sec. (II) R128(0): VESA VBE DDC read successfully (II) R128(0): Manufacturer: DEL Model: 300a Serial#: 1110725204 (II) R128(0): Year: 2000 Week: 37 (II) R128(0): EDID Version: 1.2 (II) R128(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V (II) R128(0): Sync: Separate (II) R128(0): Max Image Size [cm]: horiz.: 32 vert.: 24 (II) R128(0): Gamma: 2.26 (II) R128(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) R128(0): First detailed timing is preferred mode (II) R128(0): redX: 0.645 redY: 0.321 greenX: 0.285 greenY: 0.600 (II) R128(0): blueX: 0.142 blueY: 0.057 whiteX: 0.281 whiteY: 0.311 (II) R128(0): Supported VESA Video Modes: (II) R128(0): 720x400@70Hz (II) R128(0): 640x480@60Hz (II) R128(0): 640x480@75Hz (II) R128(0): 800x600@60Hz (II) R128(0): 800x600@75Hz (II) R128(0): 1024x768@60Hz (II) R128(0): 1024x768@75Hz (II) R128(0): Manufacturer's mask: 0 (II) R128(0): Supported Future Video Modes: (II) R128(0): #0: hsize: 1024 vsize 768 refresh: 85 vid: 22881 (II) R128(0): #1: hsize: 640 vsize 480 refresh: 85 vid: 22833 (II) R128(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) R128(0): Supported additional Video Mode: (II) R128(0): clock: 94.5 MHz Image Size: 306 x 230 mm (II) R128(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 137= 6=20 h_border: 0 (II) R128(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808=20 v_border: 0 (II) R128(0): Serial No: 2010V09CB4RT (II) R128(0): Monitor name: DELL E770s (II) R128(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 70 kHz,=20 PixClock max 110 MHz (II) R128(0): EDID (in hex): (II) R128(0): 00ffffffffffff0010ac0a3054523442 (II) R128(0): 250a01026820187eea1262a552499924 (II) R128(0): 0e484fa54a0061593159818001010101 (II) R128(0): 010101010101ea240060410028303060 (II) R128(0): 130032e61000001e000000ff00323031 (II) R128(0): 3056303943423452540a000000fc0044 (II) R128(0): 454c4c2045373730730a2020000000fd (II) R128(0): 0032a01e460b000a20202020202000a7 (II) R128(1): EDID vendor "DEL", prod id 12298 (II) R128(1): Using hsync ranges from config file (II) R128(1): Using vrefresh ranges from config file (II) R128(1): Printing DDC gathered Modelines: (II) R128(1): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769= =20 772 808 +hsync +vsync (68.7 kHz) (II) R128(1): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605= =20 628 +hsync +vsync (37.9 kHz) (II) R128(1): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484= =20 500 -hsync -vsync (37.5 kHz) (II) R128(1): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492= =20 525 -hsync -vsync (31.5 kHz) (II) R128(1): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414= =20 449 -hsync +vsync (31.5 kHz) (II) R128(1): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769= =20 772 800 +hsync +vsync (60.1 kHz) (II) R128(1): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771= =20 777 806 -hsync -vsync (48.4 kHz) (II) R128(1): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604= =20 625 +hsync +vsync (46.9 kHz) (II) R128(1): Modeline "1024x768"x85.0 94.39 1024 1088 1200 1376 768 76= 9=20 772 807 -hsync +vsync (68.6 kHz) (II) R128(1): Modeline "640x480"x85.0 35.71 640 672 736 832 480 481 484= =20 505 -hsync +vsync (42.9 kHz) (II) R128(1): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024= =20 1025 1028 1060 -hsync +vsync (63.6 kHz) (=3D=3D) R128(1): Using gamma correction (1.0, 1.0, 1.0) (II) R128(1): Monitor1: Using hsync range of 30.00-70.00 kHz (II) R128(1): Monitor1: Using vrefresh range of 50.00-160.00 Hz (II) R128(1): Monitor1: Using maximum pixel clock of 110.00 MHz (II) R128(1): Estimated virtual size for aspect ratio 1.3333 is 1024x768 (II) R128(1): Clock range: 12.00 to 270.00 MHz (II) R128(1): Not using default mode "1152x864" (width too large for virtua= l=20 size) (II) R128(1): Not using default mode "1280x960" (insufficient memory for=20 mode) (II) R128(1): Not using default mode "1280x960" (insufficient memory for=20 mode) (II) R128(1): Not using default mode "640x480" (hsync out of range) (II) R128(1): Not using default mode "1280x1024" (insufficient memory for=20 mode) (II) R128(1): Not using default mode "1280x1024" (insufficient memory for=20 mode) (II) R128(1): Not using default mode "640x512" (hsync out of range) (II) R128(1): Not using default mode "1280x1024" (insufficient memory for=20 mode) (II) R128(1): Not using default mode "640x512" (hsync out of range) (II) R128(1): Not using default mode "1600x1200" (insufficient memory for=20 mode) (II) R128(1): Not using default mode "800x600" (hsync out of range) (II) R128(1): Not using default mode "1600x1200" (insufficient memory for=20 mode) (II) R128(1): Not using default mode "800x600" (hsync out of range) (II) R128(1): Not using default mode "1600x1200" (insufficient memory for=20 mode) (II) R128(1): Not using default mode "800x600" (hsync out of range) (II) R128(1): Not using default mode "1600x1200" (insufficient memory for=20 mode) (II) R128(1): Not using default mode "800x600" (hsync out of range) (II) R128(1): Not using default mode "1600x1200" (insufficient memory for=20 mode) (II) R128(1): Not using default mode "800x600" (hsync out of range) (II) R128(1): Not using default mode "1792x1344" (insufficient memory for=20 mode) (II) R128(1): Not using default mode "896x672" (hsync out of range) (II) R128(1): Not using default mode "1792x1344" (insufficient memory for=20 mode) (II) R128(1): Not using default mode "896x672" (hsync out of range) (II) R128(1): Not using default mode "1856x1392" (insufficient memory for=20 mode) (II) R128(1): Not using default mode "928x696" (hsync out of range) (II) R128(1): Not using default mode "1856x1392" (insufficient memory for=20 mode) (II) R128(1): Not using default mode "928x696" (hsync out of range) (II) R128(1): Not using default mode "1920x1440" (insufficient memory for=20 mode) (II) R128(1): Not using default mode "960x720" (hsync out of range) (II) R128(1): Not using default mode "1920x1440" (insufficient memory for=20 mode) (II) R128(1): Not using default mode "960x720" (hsync out of range) (II) R128(1): Not using default mode "1400x1050" (insufficient memory for=20 mode) (II) R128(1): Not using default mode "1400x1050" (insufficient memory for=20 mode) (II) R128(1): Not using default mode "700x525" (hsync out of range) (II) R128(1): Not using default mode "1920x1440" (insufficient memory for=20 mode) (II) R128(1): Not using default mode "960x720" (hsync out of range) (II) R128(1): Not using default mode "2048x1536" (insufficient memory for=20 mode) (II) R128(1): Not using default mode "1024x768" (hsync out of range) (II) R128(1): Not using default mode "2048x1536" (insufficient memory for=20 mode) (II) R128(1): Not using default mode "1024x768" (hsync out of range) (II) R128(1): Not using default mode "2048x1536" (insufficient memory for=20 mode) (II) R128(1): Not using default mode "1024x768" (hsync out of range) (II) R128(1): Not using driver mode "1280x1024" (insufficient memory for=20 mode) (--) R128(1): Virtual size is 1024x768 (pitch 1024) (**) R128(1): *Driver mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz (II) R128(1): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 76= 9=20 772 808 +hsync +vsync (68.7 kHz) (**) R128(1): *Driver mode "1024x768": 94.4 MHz, 68.6 kHz, 85.0 Hz (II) R128(1): Modeline "1024x768"x85.0 94.39 1024 1088 1200 1376 768 76= 9=20 772 807 -hsync +vsync (68.6 kHz) (**) R128(1): *Driver mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz (II) R128(1): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 76= 9=20 772 800 +hsync +vsync (60.1 kHz) (**) R128(1): *Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz (II) R128(1): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 77= 1=20 777 806 -hsync -vsync (48.4 kHz) (**) R128(1): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz (II) R128(1): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 76= 9=20 772 808 +hsync +vsync (68.7 kHz) (**) R128(1): *Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz (II) R128(1): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 76= 9=20 772 800 +hsync +vsync (60.0 kHz) (**) R128(1): *Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz (II) R128(1): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 77= 1=20 777 806 -hsync -vsync (56.5 kHz) (**) R128(1): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz (II) R128(1): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 77= 1=20 777 806 -hsync -vsync (48.4 kHz) (**) R128(1): *Default mode "1024x768": 44.9 MHz, 35.5 kHz, 86.9 Hz (I) (II) R128(1): Modeline "1024x768"x86.9 44.90 1024 1032 1208 1264 768 76= 8=20 776 817 interlace +hsync +vsync (35.5 kHz) (**) R128(1): *Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz (II) R128(1): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 62= 8=20 667 -hsync -vsync (49.7 kHz) (**) R128(1): *Driver mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz (II) R128(1): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 60= 4=20 625 +hsync +vsync (46.9 kHz) (**) R128(1): *Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz (II) R128(1): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 60= 5=20 628 +hsync +vsync (37.9 kHz) (**) R128(1): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz (II) R128(1): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 60= 4=20 631 +hsync +vsync (53.7 kHz) (**) R128(1): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz (II) R128(1): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 60= 4=20 625 +hsync +vsync (46.9 kHz) (**) R128(1): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz (II) R128(1): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 64= 3=20 666 +hsync +vsync (48.1 kHz) (**) R128(1): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz (II) R128(1): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 60= 5=20 628 +hsync +vsync (37.9 kHz) (**) R128(1): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz (II) R128(1): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 60= 3=20 625 +hsync +vsync (35.2 kHz) (**) R128(1): *Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D) (II) R128(1): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532= =20 541 doublescan +hsync +vsync (64.9 kHz) (**) R128(1): *Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D) (II) R128(1): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514= =20 533 doublescan +hsync +vsync (64.0 kHz) (**) R128(1): *Driver mode "640x480": 35.7 MHz, 42.9 kHz, 85.0 Hz (II) R128(1): Modeline "640x480"x85.0 35.71 640 672 736 832 480 481 484= =20 505 -hsync +vsync (42.9 kHz) (**) R128(1): *Driver mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz (II) R128(1): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484= =20 500 -hsync -vsync (37.5 kHz) (**) R128(1): *Driver mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz (II) R128(1): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492= =20 525 -hsync -vsync (31.5 kHz) (**) R128(1): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz (II) R128(1): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484= =20 509 -hsync -vsync (43.3 kHz) (**) R128(1): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz (II) R128(1): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484= =20 500 -hsync -vsync (37.5 kHz) (**) R128(1): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz (II) R128(1): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492= =20 520 -hsync -vsync (37.9 kHz) (**) R128(1): *Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D) (II) R128(1): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482= =20 500 doublescan +hsync +vsync (60.0 kHz) (**) R128(1): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz (II) R128(1): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492= =20 525 -hsync -vsync (31.5 kHz) (**) R128(1): *Driver mode "720x400": 28.3 MHz, 31.5 kHz, 70.1 Hz (II) R128(1): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414= =20 449 -hsync +vsync (31.5 kHz) (**) R128(1): *Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz (II) R128(1): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404= =20 446 -hsync +vsync (37.9 kHz) (**) R128(1): *Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz (II) R128(1): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404= =20 445 -hsync +vsync (37.9 kHz) (**) R128(1): *Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D) (II) R128(1): Modeline "576x432"x75.0 54.00 576 608 672 800 432 432 434= =20 450 doublescan +hsync +vsync (67.5 kHz) (**) R128(1): *Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz (II) R128(1): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385= =20 445 +hsync -vsync (37.9 kHz) (**) R128(1): *Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D) (II) R128(1): Modeline "512x384"x85.0 47.25 512 536 584 688 384 384 386= =20 404 doublescan +hsync +vsync (68.7 kHz) (**) R128(1): *Default mode "512x384": 39.4 MHz, 60.0 kHz, 75.0 Hz (D) (II) R128(1): Modeline "512x384"x75.0 39.38 512 520 568 656 384 384 386= =20 400 doublescan +hsync +vsync (60.0 kHz) (**) R128(1): *Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D) (II) R128(1): Modeline "512x384"x70.1 37.50 512 524 592 664 384 385 388= =20 403 doublescan -hsync -vsync (56.5 kHz) (**) R128(1): *Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D) (II) R128(1): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388= =20 403 doublescan -hsync -vsync (48.4 kHz) (**) R128(1): *Default mode "512x384": 22.4 MHz, 35.5 kHz, 86.6 Hz (D) (II) R128(1): Modeline "512x384"x86.6 22.45 512 516 604 632 384 384 388= =20 409 interlace doublescan +hsync +vsync (35.5 kHz) (**) R128(1): *Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D) (II) R128(1): Modeline "416x312"x74.7 28.64 416 432 464 576 312 312 314= =20 333 doublescan -hsync -vsync (49.7 kHz) (**) R128(1): *Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D) (II) R128(1): Modeline "400x300"x85.3 28.15 400 416 448 524 300 300 302= =20 315 doublescan +hsync +vsync (53.7 kHz) (**) R128(1): *Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D) (II) R128(1): Modeline "400x300"x75.1 24.75 400 408 448 528 300 300 302= =20 312 doublescan +hsync +vsync (46.9 kHz) (**) R128(1): *Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D) (II) R128(1): Modeline "400x300"x72.2 25.00 400 428 488 520 300 318 321= =20 333 doublescan +hsync +vsync (48.1 kHz) (**) R128(1): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D) (II) R128(1): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302= =20 314 doublescan +hsync +vsync (37.9 kHz) (**) R128(1): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D) (II) R128(1): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301= =20 312 doublescan +hsync +vsync (35.2 kHz) (**) R128(1): *Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D) (II) R128(1): Modeline "320x240"x85.2 18.00 320 348 376 416 240 240 242= =20 254 doublescan -hsync -vsync (43.3 kHz) (**) R128(1): *Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D) (II) R128(1): Modeline "320x240"x75.0 15.75 320 328 360 420 240 240 242= =20 250 doublescan -hsync -vsync (37.5 kHz) (**) R128(1): *Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D) (II) R128(1): Modeline "320x240"x72.8 15.75 320 332 352 416 240 244 246= =20 260 doublescan -hsync -vsync (37.9 kHz) (**) R128(1): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D) (II) R128(1): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246= =20 262 doublescan -hsync -vsync (31.5 kHz) (**) R128(1): *Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D) (II) R128(1): Modeline "360x200"x85.0 17.75 360 378 414 468 200 200 202= =20 223 doublescan -hsync +vsync (37.9 kHz) (**) R128(1): *Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D) (II) R128(1): Modeline "320x200"x85.3 15.75 320 336 368 416 200 200 202= =20 222 doublescan -hsync +vsync (37.9 kHz) (**) R128(1): *Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D) (II) R128(1): Modeline "320x175"x85.3 15.75 320 336 368 416 175 191 192= =20 222 doublescan +hsync -vsync (37.9 kHz) (**) R128(1): Display dimensions: (320, 240) mm (**) R128(1): DPI set to (81, 81) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Reloading /usr/local/lib/xorg/modules//libfb.so (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Reloading /usr/local/lib/xorg/modules//libxaa.so (II) Loading sub module "shadowfb" (II) LoadModule: "shadowfb" (II) Reloading /usr/local/lib/xorg/modules//libshadowfb.so (II) R128(1): Page flipping disabled (=3D=3D) R128(0): Write-combining range (0x0,0x1000) was already clear (!!) R128(1): For information on using the multimedia capabilities of this adapter, please see http://gatos.sf.net. (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? Yes, I do. (II) resource ranges after preInit: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU) [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU) [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU) [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (=3D=3D) R128(0): Write-combining range (0xa0000,0x10000) was already clear (WW) R128(0): Static buffer allocation failed -- need at least 9216 kB vide= o=20 memory (II) R128(0): Memory manager initialized to (0,0) (1024,1024) (II) R128(0): Reserved area from (0,768) to (1024,770) (II) R128(0): Largest offscreen area available: 1024 x 254 (II) R128(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Lines Dashed Lines Scanline Image Writes Setting up tile and stipple cache: 8 128x128 slots (II) R128(0): Acceleration enabled (=3D=3D) R128(0): Backing store disabled (=3D=3D) R128(0): Silken mouse enabled (II) R128(0): Using hardware cursor (scanline 3080) (II) R128(0): Largest offscreen area available: 1024 x 252 (**) Option "dpms" (**) R128(0): DPMS enabled (WW) R128(0): Direct rendering disabled (=3D=3D) RandR enabled (EE) R128(1): Unable to map MMIO aperture. Invalid argument (22) =46atal server error: AddScreen/ScreenInit failed for driver 1 (II) Screen 0 shares mem & io resources (II) Screen 1 shares mem & io resources
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200904131902.22584.lists>