Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 27 May 2014 16:17:25 +0000 (UTC)
From:      Ian Lepore <ian@FreeBSD.org>
To:        src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-stable@freebsd.org, svn-src-stable-10@freebsd.org
Subject:   svn commit: r266755 - in stable/10/sys/arm: arm include ti
Message-ID:  <201405271617.s4RGHPN3090463@svn.freebsd.org>

next in thread | raw e-mail | index | archive | help
Author: ian
Date: Tue May 27 16:17:25 2014
New Revision: 266755
URL: http://svnweb.freebsd.org/changeset/base/266755

Log:
  MFC 266621: Eliminte spurious interrupts caused by ARM weak memory ordering.

Modified:
  stable/10/sys/arm/arm/gic.c
  stable/10/sys/arm/arm/intr.c
  stable/10/sys/arm/include/intr.h
  stable/10/sys/arm/ti/aintc.c
Directory Properties:
  stable/10/   (props changed)

Modified: stable/10/sys/arm/arm/gic.c
==============================================================================
--- stable/10/sys/arm/arm/gic.c	Tue May 27 16:13:01 2014	(r266754)
+++ stable/10/sys/arm/arm/gic.c	Tue May 27 16:17:25 2014	(r266755)
@@ -83,6 +83,8 @@ __FBSDID("$FreeBSD$");
 #define GICC_ABPR		0x001C			/* v1 ICCABPR */
 #define GICC_IIDR		0x00FC			/* v1 ICCIIDR*/
 
+#define	GIC_LAST_IPI		15	/* Irqs 0-15 are IPIs. */
+
 /* First bit is a polarity bit (0 - low, 1 - high) */
 #define GICD_ICFGR_POL_LOW	(0 << 0)
 #define GICD_ICFGR_POL_HIGH	(1 << 0)
@@ -268,6 +270,8 @@ gic_post_filter(void *arg)
 {
 	uintptr_t irq = (uintptr_t) arg;
 
+	if (irq > GIC_LAST_IPI)
+		arm_irq_memory_barrier(irq);
 	gic_c_write_4(GICC_EOIR, irq);
 }
 
@@ -284,13 +288,13 @@ arm_get_next_irq(int last_irq)
 	 * have this information later.
 	 */
 
-	if ((active_irq & 0x3ff) < 16)
+	if ((active_irq & 0x3ff) <= GIC_LAST_IPI)
 		gic_c_write_4(GICC_EOIR, active_irq);
 	active_irq &= 0x3FF;
 
 	if (active_irq == 0x3FF) {
 		if (last_irq == -1)
-			printf("Spurious interrupt detected [0x%08x]\n", active_irq);
+			printf("Spurious interrupt detected\n");
 		return -1;
 	}
 
@@ -309,6 +313,8 @@ void
 arm_unmask_irq(uintptr_t nb)
 {
 
+	if (nb > GIC_LAST_IPI)
+		arm_irq_memory_barrier(nb);
 	gic_d_write_4(GICD_ISENABLER(nb >> 5), (1UL << (nb & 0x1F)));
 }
 

Modified: stable/10/sys/arm/arm/intr.c
==============================================================================
--- stable/10/sys/arm/arm/intr.c	Tue May 27 16:13:01 2014	(r266754)
+++ stable/10/sys/arm/arm/intr.c	Tue May 27 16:17:25 2014	(r266755)
@@ -149,3 +149,67 @@ arm_irq_handler(struct trapframe *frame)
 		}
 	}
 }
+
+/*
+ * arm_irq_memory_barrier()
+ *
+ * Ensure all writes to device memory have reached devices before proceeding.
+ *
+ * This is intended to be called from the post-filter and post-thread routines
+ * of an interrupt controller implementation.  A peripheral device driver should
+ * use bus_space_barrier() if it needs to ensure a write has reached the
+ * hardware for some reason other than clearing interrupt conditions.
+ *
+ * The need for this function arises from the ARM weak memory ordering model.
+ * Writes to locations mapped with the Device attribute bypass any caches, but
+ * are buffered.  Multiple writes to the same device will be observed by that
+ * device in the order issued by the cpu.  Writes to different devices may
+ * appear at those devices in a different order than issued by the cpu.  That
+ * is, if the cpu writes to device A then device B, the write to device B could
+ * complete before the write to device A.
+ *
+ * Consider a typical device interrupt handler which services the interrupt and
+ * writes to a device status-acknowledge register to clear the interrupt before
+ * returning.  That write is posted to the L2 controller which "immediately"
+ * places it in a store buffer and automatically drains that buffer.  This can
+ * be less immediate than you'd think... There may be no free slots in the store
+ * buffers, so an existing buffer has to be drained first to make room.  The
+ * target bus may be busy with other traffic (such as DMA for various devices),
+ * delaying the drain of the store buffer for some indeterminate time.  While
+ * all this delay is happening, execution proceeds on the CPU, unwinding its way
+ * out of the interrupt call stack to the point where the interrupt driver code
+ * is ready to EOI and unmask the interrupt.  The interrupt controller may be
+ * accessed via a faster bus than the hardware whose handler just ran; the write
+ * to unmask and EOI the interrupt may complete quickly while the device write
+ * to ack and clear the interrupt source is still lingering in a store buffer
+ * waiting for access to a slower bus.  With the interrupt unmasked at the
+ * interrupt controller but still active at the device, as soon as interrupts
+ * are enabled on the core the device re-interrupts immediately: now you've got
+ * a spurious interrupt on your hands.
+ *
+ * The right way to fix this problem is for every device driver to use the
+ * proper bus_space_barrier() calls in its interrupt handler.  For ARM a single
+ * barrier call at the end of the handler would work.  This would have to be
+ * done to every driver in the system, not just arm-specific drivers.
+ *
+ * Another potential fix is to map all device memory as Strongly-Ordered rather
+ * than Device memory, which takes the store buffers out of the picture.  This
+ * has a pretty big impact on overall system performance, because each strongly
+ * ordered memory access causes all L2 store buffers to be drained.
+ *
+ * A compromise solution is to have the interrupt controller implementation call
+ * this function to establish a barrier between writes to the interrupt-source
+ * device and writes to the interrupt controller device.
+ *
+ * This takes the interrupt number as an argument, and currently doesn't use it.
+ * The plan is that maybe some day there is a way to flag certain interrupts as
+ * "memory barrier safe" and we can avoid this overhead with them.
+ */
+void
+arm_irq_memory_barrier(uintptr_t irq)
+{
+
+	dsb();
+	cpu_l2cache_drain_writebuf();
+}
+

Modified: stable/10/sys/arm/include/intr.h
==============================================================================
--- stable/10/sys/arm/include/intr.h	Tue May 27 16:13:01 2014	(r266754)
+++ stable/10/sys/arm/include/intr.h	Tue May 27 16:17:25 2014	(r266755)
@@ -79,6 +79,8 @@ extern void (*arm_post_filter)(void *);
 extern int (*arm_config_irq)(int irq, enum intr_trigger trig,
     enum intr_polarity pol);
 
+void arm_irq_memory_barrier(uintptr_t);
+
 void gic_init_secondary(void);
 
 #endif	/* _MACHINE_INTR_H */

Modified: stable/10/sys/arm/ti/aintc.c
==============================================================================
--- stable/10/sys/arm/ti/aintc.c	Tue May 27 16:13:01 2014	(r266754)
+++ stable/10/sys/arm/ti/aintc.c	Tue May 27 16:17:25 2014	(r266755)
@@ -180,5 +180,7 @@ arm_mask_irq(uintptr_t nb)
 void
 arm_unmask_irq(uintptr_t nb)
 {
+
+	arm_irq_memory_barrier(nb);
 	aintc_write_4(INTC_MIR_CLEAR(nb >> 5), (1UL << (nb & 0x1F)));
 }



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201405271617.s4RGHPN3090463>