Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 7 Jul 1999 17:47:51 +0900 (JST)
From:      hosokawa@itc.keio.ac.jp (HOSOKAWA Tatsumi)
To:        obrien@NUXI.com
Cc:        mobile@FreeBSD.ORG, hosokawa@itc.keio.ac.jp
Subject:   Re: Xircom 10/100 in current
Message-ID:  <199907070847.RAA08566@afs.ntc.mita.keio.ac.jp>
In-Reply-To: Your message of "Wed, 7 Jul 1999 16:12:00 JST". <19990707001200.G31288@dragon.nuxi.com>

next in thread | previous in thread | raw e-mail | index | archive | help
In article <19990707001200.G31288@dragon.nuxi.com>
obrien@NUXI.com writes:

>> > Which Xircom card specifically??
>> 
>> What does your /etc/pccard.conf contain?
>> What is the output from ``pccardc dumpcis''?

I tested it under xe 1.19, but I got the same result.

I'm using the default /etc/pccard.conf.

card "Xircom" "CreditCard 10/100"
        config  0x1 "xe0" ?
        insert  echo Xircom CreditCard Ethernet inserted
        insert  /etc/pccard_ether xe0
        remove  echo Xircom CreditCard Ethernet removed
        remove  /etc/pccard_ether xe0 delete

pccardc dumcis says:

Code 136 not found
Code 136 not found
code Unknown ignored
code Manufacturer ID ignored
Configuration data for card in slot 1
Tuple #1, code = 0x1 (Common memory descriptor), length = 2
    000:  00 ff
	Common memory device information:
		Device number 1, type No device, WPS = OFF
		Speed = No speed, Memory block size = reserved, 32 units
Tuple #2, code = 0x17 (Attribute memory descriptor), length = 2
    000:  00 ff
	Attribute memory device information:
		Device number 1, type No device, WPS = OFF
		Speed = No speed, Memory block size = reserved, 32 units
Tuple #3, code = 0x15 (Version 1 info), length = 44
    000:  05 00 58 69 72 63 6f 6d 00 43 72 65 64 69 74 43
    010:  61 72 64 20 31 30 2f 31 30 30 00 43 45 33 2d 31
    020:  30 2f 31 30 30 00 31 2e 30 30 00 ff
	Version = 5.0, Manuf = [Xircom],card vers = [CreditCard 10/100]
	Addit. info = [CE3-10/100],[1.00]
Tuple #4, code = 0x0 (Null tuple), length = 8
    000:  20 38 db 00 00 00 00 00
Tuple #5, code = 0x0 (Null tuple), length = 5
    000:  05 01 0a 01 43
Tuple #6, code = 0x44 (Card init date), length = 4
    000:  50 b2 3d 22
Tuple #7, code = 0x1a (Configuration map), length = 5
    000:  01 01 00 08 03
	Reg len = 2, config register addr = 0x800, last config = 0x1
	Registers: XX------ 
Tuple #8, code = 0x1b (Configuration entry), length = 25
    000:  c1 c1 bd 7f 55 4d 5d 3e 46 46 06 e0 17 17 e4 60
    010:  00 00 0f 70 bc 8e 10 00 20
	Config index = 0x1(default)
	Interface byte = 0xc1 (I/O)  +RDY/-BSY active, wait signal supported
	Vcc pwr:
		Nominal operating supply voltage: 5 x 1V
		Minimum operating supply voltage: 4.5 x 1V
		Maximum operating supply voltage: 5.5 x 1V
		Continuous supply current: 3.5 x 100mA
		Max current average over 1 second: 4 x 100mA
		Max current average over 10 ms: 4 x 100mA
		Power down supply current: 1 x 100mA
	Wait scale Speed = 1.2 x 10 ms
	RDY/BSY scale Speed = 1.2 x 10 ms
	Card decodes 4 address lines, full 8/16 Bit I/O
		I/O address # 1: block start = 0x0 block length = 0x10
		IRQ modes: Level, Pulse
		IRQs:  2 3 4 5 7 9 10 11 15
	Memory space length = 0x10
	Max twin cards = 0
	Misc attr: (Power down supported)
Tuple #9, code = 0x21 (Functional ID), length = 2
    000:  06 00
	Network/LAN adapter
Tuple #10, code = 0x22 (Functional EXT), length = 8
    000:  04 06 00 80 c7 20 38 db
	Voice services available:
Tuple #11, code = 0x22 (Functional EXT), length = 2
    000:  01 02
	Modem interface capabilities:
Tuple #12, code = 0x22 (Functional EXT), length = 5
    000:  02 80 96 98 00
	Data modem services available:
Tuple #13, code = 0x22 (Functional EXT), length = 5
    000:  02 00 e1 f5 05
	Data modem services available:
Tuple #14, code = 0x22 (Functional EXT), length = 2
    000:  03 01
Tuple #15, code = 0x22 (Functional EXT), length = 2
    000:  03 03
Tuple #16, code = 0x22 (Functional EXT), length = 2
    000:  05 00
	Modem interface capabilities:
Tuple #17, code = 0xff (Terminator), length = 0
2 slots found
--
HOSOKAWA, Tatsumi
Assistant Manager
Information Technology Center, Keio University
<hosokawa@itc.keio.ac.jp>


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199907070847.RAA08566>