Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 3 Jan 1996 10:39:02 -0700 (MST)
From:      Terry Lambert <>
To: (Jonathan M. Bresler)
Subject:   Re: iijpp STILL cannot talk to my modem :-((
Message-ID:  <>
In-Reply-To: <Pine.BSF.3.91.960102230109.3578B-100000@Aspen.Woc.Atinc.COM> from "Jonathan M. Bresler" at Jan 2, 96 11:03:17 pm

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
> > Unfortunately, this had no effect on iij-ppp, in term mode.  I still get no
> > characters received/sent by/from the modem.  One note however, when I issue
> > the term command, the TR light on the modem comes on, indicating that some
> > sort of signal is being received. 
> 	TR??  as in DTR ??  what kind of modem again please?? can you 
> send the setup information (available with ati4 or at&v or some such 
> depend on maker)

I think what was meant was "TR?? as in Transmit Received??".  8-).

The modem won't necessarily respond if DTR is not also asserted.

Since DTR is asserted by opening the port if you are using the cua
device, most likely, the port had enabled CTS/RTS and is not asserting

Since you are using iijppp, I know that CTS/RTS is enabled on the
port.  The question is, is your modem new enough to handle it correctly,
and is your cable good?

					Terry Lambert
Any opinions in this posting are my own and not those of my present
or previous employers.

Want to link to this message? Use this URL: <>