Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 22 May 2013 12:38:18 +0530
From:      hrkesh sahu <hrisikeshsahu@gmail.com>
To:        =?ISO-8859-1?Q?Trond_Endrest=F8l?= <Trond.Endrestol@fagskolen.gjovik.no>
Cc:        FreeBSD questions <freebsd-questions@freebsd.org>
Subject:   Re: Fresh installation 9.1
Message-ID:  <CAMB42mwjMoOsjdDVUyo8dazym63atBfySFt4E38Kbd2vq0e9Gw@mail.gmail.com>
In-Reply-To: <alpine.BSF.2.00.1305220825560.72982@mail.fig.ol.no>
References:  <CAMB42mzLT_T7UEsCASZg6AvQ67=6QwVqrtWy_roWPohK4jO1bw@mail.gmail.com> <CAMB42myZvcABC0p167RtDMxF=Qv0rXxpYi_B9EiVz9HQe-niDg@mail.gmail.com> <alpine.BSF.2.00.1305091019190.72982@mail.fig.ol.no> <CAMB42mzFdMrDqFbRXW5rj8NyK2rwmTKP4C_UOiMirq7YpAMc0A@mail.gmail.com> <alpine.BSF.2.00.1305220825560.72982@mail.fig.ol.no>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
Hi ,
Thanks a lot for this quick reply.
Sorry i missed the " in the end while typing. It's a typo.
I provided the ouput of " nestat -r " and "ifconfig".

> netstat -r
--------------
routing tables  -

internet :
-----------
destination                   Gateway
Flags                       Refs
Use                               Netif Expire
default                         192.168.200.1
UGS                       0
0                                  re0
localhost                      link#12
UH                         0
148                               lo0
192.168.100.0              link#10
U                           0
0                                   rl0
192.168.100.101           link#10                      UHS
                     0
0                                   lo0
192.168.200.0              link#5
U                           0
0                                   re0
192.168.200.101           link#5                      UHS
                       0
0                                   lo0

Internet6:
-------------------
Ipv6 details

> Ifconfig
--------------------
re0: flags=3D8843<UP,Broadcast,Running,Simplex,Multicast> Metric 0 mtu 1500
options=3D8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC=
,LINKSTATE>
ether 00:1f:d0:40:8b:bd
inet6 fe80::21f:d0ff:fe40:8bbd%re0 prefixlen 64 scopeid 0x5
inet 192.168.200.101 netmask 0xffffff00         broadcast 192.168.200.255
nd6 options=3D21<PERFORMNUD,AUTO_LINKLOCAL>
media:Enthernet autoselect (none)
status: no carrier

rl0: flags=3D8843<UP,Broadcast,Running,Simplex,Multicast> Metric 0 mtu 1500
options=3D2008<VLAN_MTU,WOL_MAGIC>
ether 00:10:b5:48:9f:73
inet6 fe80::21f:b5ff:fe48:9f73%rl0 prefixlen 64 scopeid 0xa
inet 192.168.100.101 netmask 0xffffff00         broadcast 192.168.100.255
nd6 options=3D21<PERFORMNUD,AUTO_LINKLOCAL>
media:Enthernet autoselect (none)
status: no carrier

there is a plip0 and lo0.

Regards
Hrisikesh




On Wed, May 22, 2013 at 12:02 PM, Trond Endrest=F8l <
Trond.Endrestol@fagskolen.gjovik.no> wrote:

> On Wed, 22 May 2013 11:10+0530, hrkesh sahu wrote:
>
> > Hi All,
> > IPv4 Routing  -
> > ------------------------
> > I disabled the DHCP from rc.conf for both the interface. but still I am
> not
> > able to route trafic from one interface to another.
> >
> > rc.conf
> > ---------------
> > hostname=3D"idc-freebsd"
> > keymap=3D"hy.armscii-8.kbd"
> > #ifconfig_re0=3D"DHCP"
> > #ifconfig_rl0=3D"DHCP"
> > dumpdev=3D"NO"
>
> > ifconfig_rl0=3D"inet 192.168.100.101 netmask 255.255.255.0
> > ifconfig_re0=3D"inet 192.168.200.101 netmask 255.255.255.0
>
> Are the two lines above copied straight from your rc.conf file?
> If so, both lines are missing a " at the end. Please check to see if
> this is needed.
>
> Next, the outputs of the ifconfig command and the netstat -r command
> should reveal something interesting. Would you please post the
> results from these two commands?
>
> > ipv6_activate_all_interfaces=3D"YES"
> > gateway_enable=3D"YES"
> > default_router=3D"192.168.200.1"
> >
> > I am using FreeBSD - 9.1 Release version
> >
> > I need to communicate between two different subnets.
> >
> > Am i missing anything to enable freebsd as router?
> > Do i need to add a route entry?
> >
> > If possible could you please share rc.conf file with IPv4 routing?
> >
> > Regards
> > Hrisikesh
> >
> > On Thu, May 9, 2013 at 2:04 PM, Trond Endrest=F8l <
> > Trond.Endrestol@fagskolen.gjovik.no> wrote:
> >
> > > On Thu, 9 May 2013 12:18+0530, hrkesh sahu wrote:
> > >
> > > > > HI All,
> > > > >
> > > > I have a FreeBSD 9.1 Release installed with TWO NIC cards. I was
> trying
> > > to
> > > > make this FreeBSD machine as a router .
> > > > This is my rc.conf
> > > > --------------------------------
> > > > ifconfig_rl0 =3D "inet 192.168.100.101 netmask 255.255.255.0"
> > > > ifconfig_re0=3D"inet 192.168.200.101 netmask 255.255.255.0"
> > > >
> > > > gateway_enable =3D "YES"
> > > > ifconfig_rl0 =3D "DHCP"
> > > > ifconfig_re0 =3D "DHCP"
> > > >
> > > > defaultrouter =3D "192.168.100.1"
> > > > ipv6_activate_all_interfaces =3D "YES"
> > > > sshd_enable =3D "YES"
> > > > synchronous_dhclient=3D"YES"
> > > >
> > > > Please help me to establish a IPv4 router.
> > > > Both the interfaces are connected to to different laptops with a
> static
> > > IP
> > > > address.
> > >
> > > You should place a # in front of the two lines:
> > >
> > > > ifconfig_rl0 =3D "DHCP"
> > > > ifconfig_re0 =3D "DHCP"
> > >
> > > Next, you probably shouldn't place spaces before and after the equal
> > > signs.
> > >
> > > > Laptop 1 =3D 192.168.100.102  ( connected to interface rl0) gateway=
  -
> > > > 192.168.100.1
> > > >
> > > > Laptop 2 =3D 192.168.200.102 ( connected to interface re0)
> > > > ping from Laptop1 -> rl0 is successful
> > > > but ping from Laptop1 -> re0 is not successful.
> > > >
> > > > After this I want to know also How to make this as IPv6 router?
> > >
> > > See
> > >
> http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/network-ipv6.ht=
ml
> > > .
> > >
> > > You probably should create a ULA prefix or two, and assign these to
> > > your router interfaces. http://www.sixxs.net/tools/grh/ula/ might hel=
p
> > > you.
> > >
> > > Something along these lines might help you achieve what you want:
> > >
> > > ifconfig_rl0_ipv6=3D"inet6 fd8f:d6d0:e6e7:100::1 prefixlen 64"
> > > ifconfig_re0_ipv6=3D"inet6 fd44:13de:a366:200::1 prefixlen 64"
> > > ipv6_gateway_enable=3D"YES"
> > >
> > > Finally you probably should configure and enable Router Advertisement
> > > and Host Auto Configuration as explained in section 32.11.6 of
> > >
> http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/network-ipv6.ht=
ml
> > > .
>
> --
> +-------------------------------+------------------------------------+
> | Vennlig hilsen,               | Best regards,                      |
> | Trond Endrest=F8l,              | Trond Endrest=F8l,                   =
|
> | IT-ansvarlig,                 | System administrator,              |
> | Fagskolen Innlandet,          | Gj=F8vik Technical College, Norway,  |
> | tlf. mob.   952 62 567,       | Cellular...: +47 952 62 567,       |
> | sentralbord 61 14 54 00.      | Switchboard: +47 61 14 54 00.      |
> +-------------------------------+------------------------------------+
>



Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?CAMB42mwjMoOsjdDVUyo8dazym63atBfySFt4E38Kbd2vq0e9Gw>