Date: Tue, 16 Dec 2003 11:20:07 +0100 From: Tim Reinders <tim@foomatic.nl> To: freebsd-scsi@freebsd.org Subject: problems with Adaptec 29320 Ultra320 SCSI adapter Message-ID: <1071570007.1439.4.camel@mmmmbob>
next in thread | raw e-mail | index | archive | help
Hi,
I'm having problems with this adapter . When i boot my freebsd 4.9 box
it dumps the card
dmesg (debug on):
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 4.9-RELEASE-p1 #2: Mon Dec 15 16:33:21 CET 2003
root@house.scarlet-internet.nl:/usr/src/sys/compile/HOUSE
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2399.33-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 2146959360 (2096640K bytes)
avail memory = 2085253120 (2036380K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 24 pins in IOAPIC #1
Programming 24 pins in IOAPIC #2
FreeBSD/SMP: Multiprocessor motherboard: 4 CPUs
cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000
cpu1 (AP): apic id: 6, version: 0x00050014, at 0xfee00000
cpu2 (AP): apic id: 1, version: 0x00050014, at 0xfee00000
cpu3 (AP): apic id: 7, version: 0x00050014, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00178020, at 0xfec00000
io1 (APIC): apic id: 3, version: 0x00178020, at 0xfec80000
io2 (APIC): apic id: 4, version: 0x00178020, at 0xfec80400
Preloaded elf kernel "kernel" at 0xc04d2000.
Warning: Pentium 4 CPU: PSE disabled
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 24 entries at 0xc00fde40
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #0 intpin 16 -> irq 2
IOAPIC #0 intpin 19 -> irq 10
IOAPIC #0 intpin 18 -> irq 11
pci0: <PCI bus> on pcib0
pci0: <unknown card> (vendor=0x8086, dev=0x2541) at 0.1
pcib1: <PCI to PCI bridge (vendor=8086 device=2543)> at device 2.0 on
pci0
pci1: <PCI bus> on pcib1
pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0
pcib2: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on
pci1
IOAPIC #2 intpin 0 -> irq 16
IOAPIC #2 intpin 1 -> irq 17
IOAPIC #2 intpin 6 -> irq 18
IOAPIC #2 intpin 7 -> irq 19
pci2: <PCI bus> on pcib2
ahd0: <Adaptec 29320 Ultra320 SCSI adapter> port
0x3000-0x30ff,0x3400-0x34ff mem 0xf8200000-0xf8201fff irq 16 at device
1.0 on pci2
ahd0: scb size = 0x50, hscb size = 0x40
Reading mode 0x0
ahd0: Setting mode 0x33
ahd0: Seeprom Contents:
0x170c
0x170c
0x170c
0x170c
0x170c
0x170c
0x170c
0x170c
0xdf4
0x2807
0xffff
0xffff
0xffff
0xffff
0xffff
0x410
0x4350
0x6f74
0x4943
0x6972
0x2065
0x6e65
0x3d72
0x3638
0x7665
0x3d65
0x3036
0x0
0x0
0x0
0x0
0x0
(0): 1:c:fe:2
(1): 1:c:fe:2
(2): 1:c:fe:2
(3): 1:c:fe:2
(4): 1:c:fe:2
(5): 1:c:fe:2
(6): 1:c:fe:2
(7): 1:c:fe:2
(8): 1:c:fe:2
(9): 1:c:fe:2
(10): 1:c:fe:2
(11): 1:c:fe:2
(12): 1:c:fe:2
(13): 1:c:fe:2
(14): 1:c:fe:2
(15): 1:c:fe:2
ahd0: ahd_sglist_allocsize = 0x3000
Mapped SG data
Mapped sense data
ahd0: Setting mode 0x0
ahd0: Setting mode 0x11
ahd0: Setting mode 0x44
ahd0: Setting up iocell workaround
ahd0: Setting mode 0x33
ahd0: Setting mode 0x22
ahd0: Setting mode 0x33
ahd0: Setting mode 0x22
ahd0: Setting mode 0x33
aic7901A: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
ahd1: <Adaptec 29320 Ultra320 SCSI adapter> port
0x3800-0x38ff,0x3c00-0x3cff mem 0xf8202000-0xf8203fff irq 17 at device
1.1 on pci2
ahd1: scb size = 0x50, hscb size = 0x40
Reading mode 0x0
ahd1: Setting mode 0x33
ahd1: Seeprom Contents:
0x17c8
0x17c8
0x17c8
0x17c8
0x17c8
0x17c8
0x17c8
0x17c8
0xdf4
0x2807
0xffff
0xffff
0xffff
0xffff
0xffff
0x410
0x9c00
0x9c00
0x0
0xa980
0xa980
0xffff
0x2
0x1
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
(0): 1:8:fe:3f
(1): 1:8:fe:3f
(2): 1:8:fe:3f
(3): 1:8:fe:3f
(4): 1:8:fe:3f
(5): 1:8:fe:3f
(6): 1:8:fe:3f
(7): 1:8:fe:3f
(8): 1:8:fe:3f
(9): 1:8:fe:3f
(10): 1:8:fe:3f
(11): 1:8:fe:3f
(12): 1:8:fe:3f
(13): 1:8:fe:3f
(14): 1:8:fe:3f
(15): 1:8:fe:3f
ahd1: ahd_sglist_allocsize = 0x3000
Mapped SG data
Mapped sense data
ahd1: Setting mode 0x0
ahd1: Setting mode 0x11
ahd1: Setting mode 0x44
ahd1: Setting up iocell workaround
ahd1: Setting mode 0x33
ahd1: Setting mode 0x22
ahd1: Setting mode 0x33
ahd1: Setting mode 0x22
ahd1: Setting mode 0x33
aic7901A: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.16> port
0x4000-0x403f mem 0xf8220000-0xf823ffff irq 18 at device 3.0 on pci2
em0: Speed:N/A Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.16> port
0x4040-0x407f mem 0xf8240000-0xf825ffff irq 19 at device 3.1 on pci2
em1: Speed:N/A Duplex:N/A
pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0
pcib3: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on
pci1
IOAPIC #1 intpin 6 -> irq 20
pci3: <PCI bus> on pcib3
asr0: <Adaptec Caching SCSI RAID> mem
0xfc000000-0xfdffffff,0xfb000000-0xfbffffff,0xf8300000-0xf83fffff irq 20
at device 3.0 on pci3
asr0: major=154
asr0: ADAPTEC 2015S FW Rev. 3B05, 2 channel, 256 CCBs, Protocol I2O
pci0: <UHCI USB controller> at 29.0 irq 2
pci0: <UHCI USB controller> at 29.1 irq 10
pci0: <UHCI USB controller> at 29.2 irq 11
pcib4: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on
pci0
pci4: <PCI bus> on pcib4
pci4: <ATI Mach64-GR graphics accelerator> at 1.0 irq 2
isab0: <PCI to ISA bridge (vendor=8086 device=2480)> at device 31.0 on
pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port
0x2060-0x206f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 irq 0 at
device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 irq 0
eisa0: <EISA bus> on motherboard
eisa0: unknown card @@@0000 (0x00000000) at slot 3
orm0: <Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xcefff,0xdc000-0xdffff,0xe0000-0xe3fff on isa0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0
ahd1: PCI error Interrupt
Reading mode 0x0
ahd1: Setting mode 0x33
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd1: Dumping Card State at program address 0x23 Mode 0x0
Card was paused
HS_MAILBOX[0x0] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0x0]
DFFSTAT[0x30]:(CURRFIFO_0|FIFO0FREE|FIFO1FREE) SCSISIGI[0x0]:(P_DATAOUT)
SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE)
SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
SEQCTL0[0x10]:(FASTMODE) SEQINTCTL[0x0] SEQ_FLAGS[0x0]
SEQ_FLAGS2[0x0] SSTAT0[0x0] SSTAT1[0x8]:(BUSFREE)
SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0
ahd1: Setting mode 0x22
qinstart = 0 qinfifonext = 0
QINFIFO:
WAITING_TID_QUEUES:
ahd1: Setting mode 0x33
Pending list:
Total 0
Kernel Free SCB list: 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
ahd1: Setting mode 0x0
ahd1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) ahd1: Setting
mode 0x11
ahd1: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0
ahd1: Setting mode 0x44
ahd1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x42
ahd1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0x6c]:(ENOVERRUN|ENIOERR|ENSELDI|ENSELDO)
ahd1: Setting mode 0x22
CCSCBCTL[0x0]
ahd1: Setting mode 0x0
ahd1: REG0 == 0x6b65, SINDEX = 0x0, DINDEX = 0x0
ahd1: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
CDB 0 0 0 0 0 0
STACK: 0x14 0x8 0x7 0x6 0x5 0x4 0x3 0x23
>>>>>>>>>>>>>>>>>
ahd1: Setting mode 0x44
ahd1: Signaled Target Abort
ahd1: Setting mode 0x0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
DUMMYNET initialized (011031)
IP packet filtering initialized, divert disabled, rule-based forwarding
enabled, default to deny, logging limited to 10 packets/entry by default
IPv6 packet filtering initialized, default to accept, unlimited logging
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
acd0: CDROM <MATSHITA CR-177> at ata1-master PIO4
Waiting 15 seconds for SCSI devices to settle
Reading mode 0x0
ahd0: Setting mode 0x33
ahd0: Setting mode 0x0
ahd0: Setting mode 0x33
ahd0: Setting mode 0x11
ahd0: Setting mode 0x33
ahd0: Setting mode 0x0
ahd0: Setting mode 0x33
Reading mode 0x33
ahd0: Setting mode 0x0
ahd0: Setting mode 0x11
ahd0: Setting mode 0x44
ahd0: Setting up iocell workaround
ahd0: Setting mode 0x33
ahd0: Setting mode 0x22
ahd0: Setting mode 0x33
ahd0: Setting mode 0x22
ahd0: Setting mode 0x33
ahd0: Setting mode 0x22
ahd0: Setting mode 0x33
ahd0: Clearing FIFO 0
ahd0: Setting mode 0x0
ahd0: Setting mode 0x33
ahd0: Clearing FIFO 1
ahd0: Setting mode 0x11
ahd0: Setting mode 0x33
ahd0: Setting mode 0x22
ahd0: Setting mode 0x33
ahd0: Setting mode 0x22
ahd0: Setting mode 0x33
Reading mode 0x22
ahd1: Setting mode 0x33
ahd1: Setting mode 0x22
ahd1: Setting mode 0x33
ahd1: Setting mode 0x11
ahd1: Setting mode 0x33
ahd1: Setting mode 0x0
ahd1: Setting mode 0x33
Reading mode 0x33
ahd1: Setting mode 0x0
ahd1: Setting mode 0x11
ahd1: Setting mode 0x44
ahd1: Setting up iocell workaround
ahd1: Setting mode 0x33
ahd1: Setting mode 0x22
ahd1: Setting mode 0x33
ahd1: Setting mode 0x22
ahd1: Setting mode 0x33
ahd1: Setting mode 0x22
ahd1: Setting mode 0x33
ahd1: Clearing FIFO 0
ahd1: Setting mode 0x0
ahd1: Setting mode 0x33
ahd1: Clearing FIFO 1
ahd1: Setting mode 0x11
ahd1: Setting mode 0x33
ahd1: Setting mode 0x22
ahd1: Setting mode 0x33
ahd1: Setting mode 0x22
ahd1: Setting mode 0x33
Reading mode 0x33
SMP: AP CPU #3 Launched!
Reading mode 0x22
ahd1: Setting mode 0x33
ahd1: Setting mode 0x22
ahd0: Queueing SCB 0xf bus addr 0x7c8c3e00 - 0x07c496484/0x80000024
ahd0: Queueing SCB 0xe bus addr 0x7c89f3c0 - 0x07c496284/0x80000024
ahd0: Queueing SCB 0xd bus addr 0x7c89f380 - 0x07c496084/0x80000024
ahd0: Queueing SCB 0xc bus addr 0x7c89f340 - 0x07c49ae84/0x80000024
ahd0: Queueing SCB 0xb bus addr 0x7c89f300 - 0x07c49ac84/0x80000024
ahd0: Queueing SCB 0xa bus addr 0x7c89f2c0 - 0x07c49aa84/0x80000024
ahd0: Queueing SCB 0x9 bus addr 0x7c89f280 - 0x07c49a884/0x80000024
ahd0: Queueing SCB 0x8 bus addr 0x7c89f240 - 0x07c49a684/0x80000024
ahd0: Queueing SCB 0x7 bus addr 0x7c89f200 - 0x07c49a484/0x80000024
ahd0: Queueing SCB 0x6 bus addr 0x7c89f1c0 - 0x07c49a284/0x80000024
ahd0: Queueing SCB 0x5 bus addr 0x7c89f180 - 0x07c49a084/0x80000024
ahd0: Queueing SCB 0x4 bus addr 0x7c89f140 - 0x07c4c1e84/0x80000024
ahd0: Queueing SCB 0x3 bus addr 0x7c89f100 - 0x07c4c1c84/0x80000024
ahd0: Queueing SCB 0x2 bus addr 0x7c89f0c0 - 0x07c4c1a84/0x80000024
ahd0: Queueing SCB 0x1 bus addr 0x7c89f080 - 0x07c4c1884/0x80000024
ahd1: Queueing SCB 0xf bus addr 0x7c869e00 - 0x07c4c1684/0x80000024
ahd1: Queueing SCB 0xe bus addr 0x7c8863c0 - 0x07c4c1484/0x80000024
ahd1: Queueing SCB 0xd bus addr 0x7c886380 - 0x07c4c1284/0x80000024
ahd1: Queueing SCB 0xc bus addr 0x7c886340 - 0x07c4c1084/0x80000024
ahd1: Queueing SCB 0xb bus addr 0x7c886300 - 0x07c46ae84/0x80000024
ahd1: Queueing SCB 0xa bus addr 0x7c8862c0 - 0x07c46ac84/0x80000024
ahd1: Queueing SCB 0x9 bus addr 0x7c886280 - 0x07c46aa84/0x80000024
ahd1: Queueing SCB 0x8 bus addr 0x7c886240 - 0x07c46a884/0x80000024
ahd1: Queueing SCB 0x7 bus addr 0x7c886200 - 0x07c46a684/0x80000024
ahd1: Queueing SCB 0x6 bus addr 0x7c8861c0 - 0x07c46a484/0x80000024
ahd1: Queueing SCB 0x5 bus addr 0x7c886180 - 0x07c46a284/0x80000024
ahd1: Queueing SCB 0x4 bus addr 0x7c886140 - 0x07c46a084/0x80000024
ahd1: Queueing SCB 0x3 bus addr 0x7c886100 - 0x07c471e84/0x80000024
ahd1: Queueing SCB 0x2 bus addr 0x7c8860c0 - 0x07c471c84/0x80000024
ahd1: Queueing SCB 0x1 bus addr 0x7c886080 - 0x07c471a84/0x80000024
Reading mode 0x33
(probe0:ahd0:0:0:0): Saw Selection Timeout for SCB 0xf
ahd0:A:0:0: Forcing renegotiation
ahd0: Setting mode 0x22
ahd0: Setting mode 0x33
ahd0: Setting mode 0x44
ahd0: iocell first selection
ahd0: Setting mode 0x33
Reading mode 0x33
(probe15:ahd1:0:0:0): Saw Selection Timeout for SCB 0xf
ahd1:A:0:0: Forcing renegotiation
ahd1: Setting mode 0x22
ahd1: Setting mode 0x33
ahd1: Setting mode 0x44
ahd1: iocell first selection
ahd1: BYPASS now disabled
ahd1: Setting mode 0x33
Reading mode 0x22
ahd0: Setting mode 0x33
(probe1:ahd0:0:1:0): Saw Selection Timeout for SCB 0xe
ahd0:A:1:0: Forcing renegotiation
ahd0: Setting mode 0x22
ahd0: Setting mode 0x33
ahd0: Setting mode 0x22
Reading mode 0x22
ahd1: Setting mode 0x33
(probe16:ahd1:0:1:0): Saw Selection Timeout for SCB 0xe
ahd1:A:1:0: Forcing renegotiation
ahd1: Setting mode 0x22
ahd1: Setting mode 0x33
ahd1: Setting mode 0x22
Reading mode 0x22
ahd0: Setting mode 0x33
(probe2:ahd0:0:2:0): Saw Selection Timeout for SCB 0xd
ahd0:A:2:0: Forcing renegotiation
ahd0: Setting mode 0x22
ahd0: Setting mode 0x33
ahd0: Setting mode 0x22
Reading mode 0x22
ahd1: Setting mode 0x33
(probe17:ahd1:0:2:0): Saw Selection Timeout for SCB 0xd
ahd1:A:2:0: Forcing renegotiation
ahd1: Setting mode 0x22
ahd1: Setting mode 0x33
ahd1: Setting mode 0x22
Reading mode 0x22
ahd0: Setting mode 0x33
(probe3:ahd0:0:3:0): Saw Selection Timeout for SCB 0xc
ahd0:A:3:0: Forcing renegotiation
ahd0: Setting mode 0x22
ahd0: Setting mode 0x33
ahd0: Setting mode 0x22
Reading mode 0x22
ahd1: Setting mode 0x33
(probe18:ahd1:0:3:0): Saw Selection Timeout for SCB 0xc
ahd1:A:3:0: Forcing renegotiation
ahd1: Setting mode 0x22
ahd1: Setting mode 0x33
ahd1: Setting mode 0x22
Reading mode 0x22
ahd0: Setting mode 0x33
(probe4:ahd0:0:4:0): Saw Selection Timeout for SCB 0xb
ahd0:A:4:0: Forcing renegotiation
ahd0: Setting mode 0x22
ahd0: Setting mode 0x33
ahd0: Setting mode 0x22
Reading mode 0x22
ahd1: Setting mode 0x33
(probe19:ahd1:0:4:0): Saw Selection Timeout for SCB 0xb
ahd1:A:4:0: Forcing renegotiation
ahd1: Setting mode 0x22
ahd1: Setting mode 0x33
ahd1: Setting mode 0x22
Reading mode 0x22
ahd0: Setting mode 0x33
(probe5:ahd0:0:5:0): Saw Selection Timeout for SCB 0xa
ahd0:A:5:0: Forcing renegotiation
ahd0: Setting mode 0x22
ahd0: Setting mode 0x33
ahd0: Setting mode 0x22
Reading mode 0x22
ahd1: Setting mode 0x33
(probe20:ahd1:0:5:0): Saw Selection Timeout for SCB 0xa
ahd1:A:5:0: Forcing renegotiation
ahd1: Setting mode 0x22
ahd1: Setting mode 0x33
ahd1: Setting mode 0x22
Reading mode 0x22
ahd0: Setting mode 0x33
(probe6:ahd0:0:6:0): Saw Selection Timeout for SCB 0x9
ahd0:A:6:0: Forcing renegotiation
ahd0: Setting mode 0x22
ahd0: Setting mode 0x33
ahd0: Setting mode 0x22
Reading mode 0x22
ahd1: Setting mode 0x33
(probe21:ahd1:0:6:0): Saw Selection Timeout for SCB 0x9
ahd1:A:6:0: Forcing renegotiation
ahd1: Setting mode 0x22
ahd1: Setting mode 0x33
ahd1: Setting mode 0x22
Reading mode 0x22
ahd0: Setting mode 0x33
(probe7:ahd0:0:8:0): Saw Selection Timeout for SCB 0x8
ahd0:A:8:0: Forcing renegotiation
ahd0: Setting mode 0x22
ahd0: Setting mode 0x33
ahd0: Setting mode 0x22
Reading mode 0x22
ahd1: Setting mode 0x33
(probe22:ahd1:0:8:0): Saw Selection Timeout for SCB 0x8
ahd1:A:8:0: Forcing renegotiation
ahd1: Setting mode 0x22
ahd1: Setting mode 0x33
ahd1: Setting mode 0x22
Reading mode 0x22
ahd0: Setting mode 0x33
(probe8:ahd0:0:9:0): Saw Selection Timeout for SCB 0x7
ahd0:A:9:0: Forcing renegotiation
ahd0: Setting mode 0x22
ahd0: Setting mode 0x33
ahd0: Setting mode 0x22
Reading mode 0x22
ahd1: Setting mode 0x33
(probe23:ahd1:0:9:0): Saw Selection Timeout for SCB 0x7
ahd1:A:9:0: Forcing renegotiation
ahd1: Setting mode 0x22
ahd1: Setting mode 0x33
ahd1: Setting mode 0x22
Reading mode 0x22
ahd0: Setting mode 0x33
(probe9:ahd0:0:10:0): Saw Selection Timeout for SCB 0x6
ahd0:A:10:0: Forcing renegotiation
ahd0: Setting mode 0x22
ahd0: Setting mode 0x33
ahd0: Setting mode 0x22
Reading mode 0x22
ahd1: Setting mode 0x33
(probe24:ahd1:0:10:0): Saw Selection Timeout for SCB 0x6
ahd1:A:10:0: Forcing renegotiation
ahd1: Setting mode 0x22
ahd1: Setting mode 0x33
ahd1: Setting mode 0x22
Reading mode 0x22
ahd0: Setting mode 0x33
(probe10:ahd0:0:11:0): Saw Selection Timeout for SCB 0x5
ahd0:A:11:0: Forcing renegotiation
ahd0: Setting mode 0x22
ahd0: Setting mode 0x33
ahd0: Setting mode 0x22
Reading mode 0x22
ahd1: Setting mode 0x33
(probe25:ahd1:0:11:0): Saw Selection Timeout for SCB 0x5
ahd1:A:11:0: Forcing renegotiation
ahd1: Setting mode 0x22
ahd1: Setting mode 0x33
ahd1: Setting mode 0x22
Reading mode 0x22
ahd0: Setting mode 0x33
(probe11:ahd0:0:12:0): Saw Selection Timeout for SCB 0x4
ahd0:A:12:0: Forcing renegotiation
ahd0: Setting mode 0x22
ahd0: Setting mode 0x33
ahd0: Setting mode 0x22
Reading mode 0x22
ahd1: Setting mode 0x33
(probe26:ahd1:0:12:0): Saw Selection Timeout for SCB 0x4
ahd1:A:12:0: Forcing renegotiation
ahd1: Setting mode 0x22
ahd1: Setting mode 0x33
ahd1: Setting mode 0x22
Reading mode 0x22
ahd0: Setting mode 0x33
(probe12:ahd0:0:13:0): Saw Selection Timeout for SCB 0x3
ahd0:A:13:0: Forcing renegotiation
ahd0: Setting mode 0x22
ahd0: Setting mode 0x33
ahd0: Setting mode 0x22
Reading mode 0x22
ahd1: Setting mode 0x33
(probe27:ahd1:0:13:0): Saw Selection Timeout for SCB 0x3
ahd1:A:13:0: Forcing renegotiation
ahd1: Setting mode 0x22
ahd1: Setting mode 0x33
ahd1: Setting mode 0x22
Reading mode 0x22
ahd0: Setting mode 0x33
(probe13:ahd0:0:14:0): Saw Selection Timeout for SCB 0x2
ahd0:A:14:0: Forcing renegotiation
ahd0: Setting mode 0x22
ahd0: Setting mode 0x33
ahd0: Setting mode 0x22
Reading mode 0x22
ahd1: Setting mode 0x33
(probe28:ahd1:0:14:0): Saw Selection Timeout for SCB 0x2
ahd1:A:14:0: Forcing renegotiation
ahd1: Setting mode 0x22
ahd1: Setting mode 0x33
ahd1: Setting mode 0x22
Reading mode 0x22
ahd0: Setting mode 0x33
(probe14:ahd0:0:15:0): Saw Selection Timeout for SCB 0x1
ahd0:A:15:0: Forcing renegotiation
ahd0: Setting mode 0x22
ahd0: Setting mode 0x33
ahd0: Setting mode 0x22
Reading mode 0x22
ahd1: Setting mode 0x33
(probe29:ahd1:0:15:0): Saw Selection Timeout for SCB 0x1
ahd1:A:15:0: Forcing renegotiation
ahd1: Setting mode 0x22
ahd1: Setting mode 0x33
ahd1: Setting mode 0x22
pass2 at asr0 bus 0 target 6 lun 0
pass2: <SUPER GEM318 0> Fixed Processor SCSI-2 device
da0 at asr0 bus 0 target 0 lun 0
da0: <SEAGATE ST336607LC 0007> Fixed Direct Access SCSI-3 device
da0: Tagged Queueing Enabled
da0: 35003MB (71687355 512 byte sectors: 255H 63S/T 4462C)
da1 at asr0 bus 0 target 1 lun 0
da1: <ADAPTEC RAID-0 3B05> Fixed Direct Access SCSI-2 device
da1: Tagged Queueing Enabled
da1: 70007MB (143374336 512 byte sectors: 255H 63S/T 8924C)
Anyone else having problems with this adapter ?
Thanks,
Tim
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1071570007.1439.4.camel>