Date: Tue, 28 Aug 2001 22:33:02 -0700 (PDT) From: Stephen Krauth <stephenk@stephenk.com> To: freebsd-mobile@freebsd.org Subject: Trouble with mwave port on Thinkpad 600 Message-ID: <Pine.BSF.4.21.0108282215040.68909-100000@azazel.inside.killermartian.com>
next in thread | raw e-mail | index | archive | help
Hey guys, I have a Thinkpad 600 and I'm running a fresh install of
FreeBSD 4.3, GENERIC kernel, with the latest port of mwavem installed.
I had to copy the mwavedd.ko file into /modules and add it to
/boot/loader.conf (the machine wouldn't boot with mwave loading from
/usr/local/etc/rc.d.)
So everything looks fine during boot now (I see the mwave
device and serial ports at least), but I can't get any response from
the modem using "cu -l cuaa*" or "tip com*" (with different numbers
for the "*"). I even tried ghost-typing ATE1 just in case.
One other datapoint (besides dmesg out, below) is that when I
load mwave, I can't use my PC card ethernet adaptor - it comes up on
the same interrupt. Needless to say, I did try mwave with no cards
inserted in the machine.
Anyway, any help will be appreciated. Thanks!
Steve K. U.F.O. - "For the feeler gauge in you."
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-RELEASE #0: Sat Apr 21 10:54:49 GMT 2001
jkh@narf.osd.bsdi.com:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (298.42-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 66912256 (65344K bytes)
config> di sn0
config> di lnc0
config> di ie0
config> di fe0
config> di cs0
config> di bt0
config> di ata1
config> di aic0
config> di aha0
config> di adv0
config> q
avail memory = 60719104 (59296K bytes)
Preloaded elf kernel "kernel" at 0xc0456000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc045609c.
Preloaded elf module "mwavedd.ko" at 0xc04560ec.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard
pci0: <PCI bus> on pcib0
pcic-pci0: <TI PCI-1250 PCI-CardBus Bridge> mem 0x20301000-0x20301fff at device 2.0 on pci0
pcic-pci0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][CSC parallel isa irq]
pcic-pci1: <TI PCI-1250 PCI-CardBus Bridge> mem 0x20300000-0x20300fff at device 2.1 on pci0
pcic-pci1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][CSC parallel isa irq]
pci0: <NeoMagic MagicGraph 128XD SVGA controller> at 3.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcf0-0xfcff at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x8400-0x841f irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0xefa0-0xefaf at device 7.3 on pci0
mwave0: <mwave> on isa0
Mwave Modem, UART settings IRQ 0x3 IO 0x2f8
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 on isa0
pcic0: Polling mode
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: cannot reserve I/O port range
ad0: 4887MB <IBM-DADA-25120> [10592/15/63] at ata0-master UDMA33
acd0: CDROM <CRN-8241B> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s2a
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0108282215040.68909-100000>