Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 10 May 1998 18:13:02 +0400 (MSD)
From:      Andrew Maltsev <am@px.f1.ru>
To:        freebsd-stable@FreeBSD.ORG
Subject:   SCSI problems?
Message-ID:  <199805101413.SAA01551@px.f1.ru>

next in thread | raw e-mail | index | archive | help
I'd just done `make world' and upgraded the kernel to -stable (as of
9-May).

Here is what I got near the and of booting:
 sd0(ahc0:4:0): SCB 0x2 - timed out while idle, LASTPHASE == 0x1, SCSISIGI == 0x0
 SEQADDR = 0x8 SCSISEQ = 0x12 SSTAT0 = 0x0 SSTAT1 = 0xa
 Ordered Tag queued
 sd0(ahc0:4:0): SCB 0x1 timedout while recovery in progress
 sd0(ahc0:4:0): SCB 0x0 timedout while recovery in progress
 sd0(ahc0:4:0): SCB 0x2 - timed out while idle, LASTPHASE == 0x1, SCSISIGI == 0x0
 SEQADDR = 0x8 SCSISEQ = 0x12 SSTAT0 = 0x0 SSTAT1 = 0xa
 sd0(ahc0:4:0): Queueing an Abort SCB
 sd0(ahc0:4:0): Abort Message Sent
 sd0(ahc0:4:0): SCB 2 - Abort Tag Completed.
 sd0(ahc0:4:0): no longer in timeout
 Ordered Tag sent

I see no more such messages. Is it a problem?

I'm using
options AHC_TAGENABLE
options AHC_SCBPAGING_ENABLE
options AHC_ALLOW_MEMIO
in my kernel.

There are no IDE drives, only 2940UW adapter and two scsi devices
 ahc0 <Adaptec 2940 Ultra SCSI host adapter> rev 1 int a irq 9 on pci0:9:0
 ahc0: aic7880 Wide Channel, SCSI Id=7, 16/255 SCBs
 (ahc0:2:0): "HP HP35480A T603" type 1 removable SCSI 2
 st0(ahc0:2:0): Sequential-Access density code 0x13,  drive empty
 ahc0: target 4 Tagged Queuing Device
 (ahc0:4:0): "SEAGATE ST34572W 0876" type 0 fixed SCSI 2
 sd0(ahc0:4:0): Direct-Access 4340MB (8888924 512 byte sectors)

Btw, should I include BOUNCE_BUFFERS option if I have no ISA cards?

Andrew.

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199805101413.SAA01551>