Date: Thu, 5 Feb 2004 14:28:15 -0500 From: John Baldwin <jhb@FreeBSD.org> To: "Jeff Klein" <jklein@zonelabs.com>, <FreeBSD-current@FreeBSD.org> Subject: Re: AE_AML_INVALID_RESOURCE_TYPE error in 5.2-CURRENT Message-ID: <200402051428.15229.jhb@FreeBSD.org> In-Reply-To: <EDDB9FD383E3DB44B3AF605FA429C172028921@exmb2.zonelabs.com> References: <EDDB9FD383E3DB44B3AF605FA429C172028921@exmb2.zonelabs.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thursday 05 February 2004 01:08 pm, Jeff Klein wrote: > Thanks for the reply, John. I didn't find an option in the BIOS to > allocate an IRQ for VGA. However, when I rebooted, I noticed that I am > now getting an additional ACPI error in dmesg (see below). I rebooted > again, just to see if it was reproducible and it is. Might this be > related to the original error (which occurs earlier in the boot)? No, that is a different set of problems that may be harmless. > Thanks, > Jeff > > PS I have not tried printf's yet. Could you give me an idea of which src > files to look at? sys/dev/acpica/acpi_pcib.c I think is where you are getting the printf regarding pcib0 from. > -----Original Message----- > From: John Baldwin [mailto:jhb@FreeBSD.org] > Sent: Wednesday, February 04, 2004 12:57 PM > To: Jeff Klein; FreeBSD-current@FreeBSD.org > Subject: Re: AE_AML_INVALID_RESOURCE_TYPE error in 5.2-CURRENT > > On Wednesday 04 February 2004 03:35 pm, Jeff Klein wrote: > > Hi All, > > > > I cvsup'ed to the latest and ran "make buildworld" last night (about > > 7pm > > > PST). I was previously running 5.1-RELEASE, but was having problems > > with SMP support. The good news is that the SMP support (w/ device > > apic) seems to be working well now, but the bad news is that I am > > getting a new error in the kernel at boot time: > > > > can't fetch resources for \\_SB_.LN1_ - AE_AML_INVALID_RESOURCE_TYPE > > > > -and- > > > > pcib0: couldn't get PCI interrupt link device _CRS data - > > AE_AML_INVALID_RESOURCE_TYPE > > > > This doesn't seem to be causing any serious problems so far, but I > > have > > > only been running on it for less than 24 hours, so it is too early to > > tell. Does anyone know if this is serious? (and if there is a > > fix/workaround?). Output from dmesg is below. > > From your dmesg it doesn't appear serious. Does it go away if you tell > your > BIOS to allocate an IRQ for the VGA device? Also, can you add a printf > to > make it print out what the resource type is when it prints that error > message > perhaps? -- John Baldwin <jhb@FreeBSD.org> <>< http://www.FreeBSD.org/~jhb/ "Power Users Use the Power to Serve" = http://www.FreeBSD.org
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200402051428.15229.jhb>