Date: Fri, 16 Jun 2000 15:53:27 +0400 (MSD) From: =?koi8-r?B?8dLP28XOy88g88XSx8XK?= <jaroshenko@mail.ru> To: =?iso-2022-jp?B?GyRCOWI2NhsoQiAbJEJEPkxvGyhC?= <naoya@ff.iij4u.or.jp> Cc: freebsd-stable@FreeBSD.ORG Subject: Re: ATA Driver Problem Message-ID: <Pine.BSF.4.21.0006161544230.499-100000@freebsd.merlin.ru> In-Reply-To: <3949EF88.8D9AF36E@ff.iij4u.or.jp>
next in thread | previous in thread | raw e-mail | index | archive | help
Try set the jumper (Master Slave Cable Select) on the ad4 and ad6
to "cable select".
Then connect to one interface cabel
------------------------ <--- interface cabel
| | |
-------- -------- --------
| | | | | |
| | | | | |
-------- -------- --------
controller Slave Disk Master Disk
May be help...
On Fri, 16 Jun 2000, [iso-2022-jp] $B9b66(B $BD>Lo(B wrote:
> I have probrem on ATA Driver.
>
> System:
> FreeBSD4.0 STABEL (cvsup & make world lastnight)
> MailBoard : ABIT BP6 with on-board HPT366 ULTRA ATA Controler
> Hard Drive : Maxtor 91152D8 at ata0-master using UDMA33 (ad0)
> : Maxtor 54098U8 at ata2-master using UDMA66
> (ad4)
> : Maxtor 54098U8 at ata3-master using UDMA66
> (ad6)
>
> ad0 have no problem
> Write files to ad4 or ad6 is Ok. ( using `cp -r ...' from ad0 )
> Read for ad4 or ad6 is Ok ( taring to null device )
> but copy from ad4 to ad6 or form ad6 to ad4 or from ad4 to ad4 or from
> ad6 to ad6
> hangs system.
> if pio mode on ad4 and ad6 (by sysctl) message
>
> microuptime() went backwards (639.4341732 -> 638,857034)
> microuptime() went backwards (639.4341732 -> 638,857187)
> microuptime() went backwards (639.4341732 -> 638,857440)
> microuptime() went backwards (639.4341732 -> 638,857897)
> microuptime() went backwards (639.4341732 -> 638,858039)
> microuptime() went backwards (639.4341732 -> 638,858465)
> microuptime() went backwards (639.4341732 -> 638,858748)
> microuptime() went backwards (639.4341732 -> 638,859016)
> microuptime() went backwards (639.4341732 -> 638,859120)
> microuptime() went backwards (639.4341732 -> 638,859301)
> microuptime() went backwards (639.4341732 -> 638,859430)
> microuptime() went backwards (639.4341732 -> 638,890516)
> microuptime() went backwards (639.4341732 -> 638,890670)
> microuptime() went backwards (639.4341732 -> 638,890948)
> microuptime() went backwards (639.4341732 -> 638,891046)
> microuptime() went backwards (639.4341732 -> 638,891131)
> microuptime() went backwards (639.4341732 -> 638,891217)
> microuptime() went backwards (639.4341732 -> 638,891307)
> microuptime() went backwards (639.4341732 -> 638,891947)
> microuptime() went backwards (639.4341732 -> 638,892525)
> microuptime() went backwards (639.4341732 -> 638,892759)
> microuptime() went backwards (639.4341732 -> 638,892906)
> microuptime() went backwards (639.4341732 -> 638,893135)
> microuptime() went backwards (639.4341732 -> 638,893671)
> microuptime() went backwards (639.4341732 -> 638,895996)
> microuptime() went backwards (639.4341732 -> 638,896134)
> microuptime() went backwards (639.4341732 -> 638,896931)
> microuptime() went backwards (639.4341732 -> 638,897419)
>
> display on console at once and reboot after few minute after.
> and reboot process hang at fsck with message
>
> ad4: READ command timeout - reserring
> ata2: resetting device ..
>
> Let me know how to fix or ways around this.
>
> Regards
>
> Naoya Takahashi
>
>
> dmsg output :
>
> Copyright (c) 1992-2000 The FreeBSD Project.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
> The Regents of the University of California. All rights reserved.
> FreeBSD 4.0-STABLE #0: Fri Jun 16 09:40:52 JST 2000
> naoya@bsd_201.rem.co.jp:/usr/src/sys/compile/RE
> Timecounter "i8254" frequency 1193182 Hz
> CPU: Pentium II/Pentium II Xeon/Celeron (544.09-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0x665 Stepping = 5
>
> Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
>
> real memory = 268369920 (262080K bytes)
> avail memory = 256929792 (250908K bytes)
> Programming 24 pins in IOAPIC #0
> IOAPIC #0 intpin 2 -> irq 0
> FreeBSD/SMP: Multiprocessor motherboard
> cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
> cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
> io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
> Preloaded elf kernel "kernel" at 0xc0402000.
> Pentium Pro MTRR support enabled
> md0: Malloc disk
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
> pci0: <PCI bus> on pcib0
> pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on
> pci0
> pci1: <PCI bus> on pcib1
> pci1: <NVidia Riva TNT graphics accelerator> at 0.0 irq 16
> isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1
> on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd000-0xd01f irq
> 19 at device 7.2 on pci0
> usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> Timecounter "PIIX" frequency 3579545 Hz
> chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at
> device 7.3 on pci0
> vr0: <VIA VT3043 Rhine I 10/100BaseTX> port 0xd400-0xd47f mem
> 0xd8000000-0xd800007f irq 19 at device 17.0 on pci0
> vr0: Ethernet address: 00:90:cc:01:8b:fc
> miibus0: <MII bus> on vr0
> amphy0: <DM9101 10/100 media interface> on miibus0
> amphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> vr0: supplying EUI64: 00:90:cc:ff:fe:01:8b:fc
> atapci1: <HighPoint HPT366 ATA66 controller> port
> 0xe000-0xe0ff,0xdc00-0xdc03,0xd800-0xd807 irq 18 at device 19.0 on pci0
> ata2: at 0xd800 on atapci1
> atapci2: <HighPoint HPT366 ATA66 controller> port
> 0xec00-0xecff,0xe800-0xe803,0xe400-0xe407 irq 18 at device 19.1 on pci0
> ata3: at 0xe400 on atapci2
> isa0: too many dependant configs (8)
> fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
> isa0
> fdc0: FIFO enabled, 8 bytes threshold
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: model Generic PS/2 mouse, device ID 0
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
> isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sio1 at port 0x2f8-0x2ff irq 3 on isa0
> sio1: type 16550A
> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
> ppi0: <Parallel I/O> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> plip0: <PLIP network interface> on ppbus0
> adv1: Invalid baseport of 0x220 specified. Neerest valid baseport is
> 0x230. Failing probe.
> unknown0: <Audio> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq
> 1,5 on isa0
> adv1: Invalid baseport of 0x200 specified. Neerest valid baseport is
> 0x210. Failing probe.
> unknown1: <Game> at port 0x200-0x207 on isa0
> adv1: Invalid baseport of 0x620 specified. Neerest valid baseport is
> 0x330. Failing probe.
> unknown2: <WaveTable> at port 0x620-0x623 on isa0
> APIC_IO: Testing 8254 interrupt delivery
> APIC_IO: routing 8254 via IOAPIC #0 intpin 2
> SMP: AP CPU #1 Launched!
> ad0: 10991MB <Maxtor 91152D8> [22332/16/63] at ata0-master using UDMA33
> ad4: 39082MB <Maxtor 54098U8> [79406/16/63] at ata2-master using UDMA66
> ad6: 39082MB <Maxtor 54098U8> [79406/16/63] at ata3-master using UDMA66
> acd0: CDROM <CD-ROM Drive/F5B> at ata0-slave using PIO4
> Mounting root from ufs:/dev/ad0s1a
> vr0: starting DAD for fe80:0001::0290:ccff:fe01:8bfc
> vr0: DAD complete for fe80:0001::0290:ccff:fe01:8bfc - no duplicates
> found
>
>
>
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-stable" in the body of the message
>
>
>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0006161544230.499-100000>