Date: Sun, 3 Sep 2017 19:13:33 -0600 From: Warner Losh <imp@bsdimp.com> To: Priyadarshana Chandrasena <vpc@ulka.com.au> Cc: Maciej Suszko <maciej@suszko.eu>, FreeBSD-STABLE Mailing List <FreeBSD-stable@freebsd.org> Subject: Re: HP Smart array P440 support Message-ID: <CANCZdfrtY27jb8gieCXT_HK2jFmuAwLpK-%2BmjRoRR4TArCScZA@mail.gmail.com> In-Reply-To: <001c01d3251a$92d20090$b87601b0$@ulka.com.au> References: <001501d323f2$3e517560$baf46020$@ulka.com.au> <20170903211908.510b5724@leo> <001c01d3251a$92d20090$b87601b0$@ulka.com.au>
next in thread | previous in thread | raw e-mail | index | archive | help
Our UEFI stuff is designed so that the defaults will just work... I find it odd that your computer doesn't work with the defaults. IT's BIOS doesn't even consider the USB drive a bootable device? Warner On Sun, Sep 3, 2017 at 7:10 PM, Priyadarshana Chandrasena <vpc@ulka.com.au> wrote: > I tried to install 11.1 but I still have the same error. UEFI boot mode > does > not see my usb bootable media as of type UEFI. So still the Legacy BIOS is > the only option. Do I need to create the usb UEFI when I create the usb > boot > disk?. > > -----Original Message----- > From: Maciej Suszko [mailto:maciej@suszko.eu] > Sent: Monday, 4 September 2017 4:49 AM > To: Priyadarshana Chandrasena > Cc: FreeBSD-stable@FreeBSD.org > Subject: Re: HP Smart array P440 support > > "Priyadarshana Chandrasena" <vpc@ulka.com.au> wrote: > > I have HP DL20 Gen 9 server. But I can not install FreeBSD 10.2 in it. > > I have a HP smart array P440 in my server. I can not find out anywhere > > if ciss driver support include HP Gen 9 storage controllers. Could > > you please update the ciss driver in 10.3? > > Hi, > > Got two DL20 with P440, UEFI booted 11.0 to logical disk (raid array). > In a few days I plan to boot it in HBA mode, we'll see if it's working. > > A few messages: > #v+ > root@storage-04:~ # uname -a > FreeBSD storage-04.gr 11.0-RELEASE-p8 FreeBSD 11.0-RELEASE-p8 #0: Wed Feb > 22 > 06:12:04 UTC 2017 > root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64 > > root@storage-04:~ # grep ciss /var/run/dmesg.boot > ciss0: <HP Smart Array P440> port 0x2000-0x20ff mem > 0x92c00000-0x92cfffff,0x92d00000-0x92d003ff at device 0.0 numa-domain 0 on > pci2 > ciss0: PERFORMANT Transport > da2 at ciss0 bus 0 scbus2 target 0 lun 0 > > root@storage-04:~ # camcontrol inquiry da2 > pass2: <HP RAID 1(1+0) OK> Fixed Direct Access SPC-3 SCSI device > pass2: Serial Number PDNMF0ARH401MI > pass2: 135.168MB/s transfers, Command Queueing Enabled > #v- > -- > regards, Maciej Suszko. > > _______________________________________________ > freebsd-stable@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CANCZdfrtY27jb8gieCXT_HK2jFmuAwLpK-%2BmjRoRR4TArCScZA>