Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 26 Nov 1996 18:30:24 -0500
From:      Guy Silliman <mgpr@ptd.net>
To:        freebsd-questions@freebsd.org
Subject:   tcp/ip on ethernet problem
Message-ID:  <1.5.4.32.19961126233024.00669130@postoffice.ptd.net>

Next in thread | Raw E-Mail | Index | Archive | Help
Hello again my friends... I am back to you with difficulties with my machine....

I have built a fbsd 2.1.5 machine for hooking up to a lan with a gateway to
the Inet.  The machine is an AMD 133, with 20meg rem, a generic s3 video
card, and an smc 8432bt pci ethernet card.  I am connected to the lan on
coax in to a tigerhub.  The gate is a trailblazer backed by csu/dsu in to a
t1.  

Enough of this... the problem is that I can not get a reliable ping to the
gateway... I have everything setup fine with the kernel, best as I can tell,
for the card.  I am on the inet 204.186.107.0  I have the addresss .6, the
gateway is .254

The arp information is all there, however when I ping to the gateway or any
other machine on the network I get 90% loss on the ping... normally it takes
19 for the first response, then I don't see anything until I get to ping #39
or more... 

I don't think it is the cable, i have removed the segment of cable I am on,
and went to a t tap that  another machine... (running nt351) works from and
has no trouble. 

I don't know what else to try at this point... I think it is either protocol
troubles, cable troubles, or my card is in trouble.

Any help will be greatly appreciated

Guy Silliman




Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?1.5.4.32.19961126233024.00669130>