Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 08 Jun 2001 00:03:39 +0200
From:      Jens Trzaska <j_trzaska@gmx.net>
To:        Warner Losh <imp@village.org>
Cc:        freebsd-mobile@freebsd.org
Subject:   Re: Xircom RealPort Cardbus 10/100
Message-ID:  <3B1FFA3B.B7859183@gmx.net>
References:  <000201c0ec11$68ac5ee0$227c3eca@is.com.fj.is.com.fj> <200106032209.f53M9El87533@billy-club.village.org>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
Hello all!

Warner Losh wrote:
> 
> In message <000201c0ec11$68ac5ee0$227c3eca@is.com.fj.is.com.fj> "Compac Awa" writes:
> : Urgently require driver for this type of Xircom network card.
> 
> Works great in -current.  However, -current is a crap shoot at the
> moment for other reasons.

For me it does not. I think i have the same card. xircom rbe-100 .
Some time ago i postet my problem and there was no real help.
I think it may be a general problem with my cardbus controller wich
runs fine with pcmcia in stable, when i set pccard's irq to 11. 
The default doesn't work. But if that is the problem how can i set 
the irq in current? Is that possible?


regards   Jens Trzaska



/var/log/messages when inserting an removing the card:

Apr 14 10:26:41 ontheroad /boot/kernel/kernel: pccbb1: card inserted:
event=0x00000000, state=30000821
Apr 14 10:26:41 ontheroad /boot/kernel/kernel: pccbb1: pccbb_power:
CARD_VCC_0V and CARD_VPP_0V [44]
Apr 14 10:26:41 ontheroad /boot/kernel/kernel: pccbb1: pccbb_power:
CARD_VCC_3V and CARD_VPP_VCC [11]
Apr 14 10:26:41 ontheroad /boot/kernel/kernel: pccbb1: pccbb_power:
CARD_VCC_0V and CARD_VPP_0V [44]
Apr 14 10:26:41 ontheroad /boot/kernel/kernel: pccbb1: card activation
failed
Apr 14 10:30:00 ontheroad /boot/kernel/kernel: cardbus1: Detaching card:
no cards to detach!
Apr 14 10:30:00 ontheroad /boot/kernel/kernel: pccbb1: pccbb_power:
CARD_VCC_0V and CARD_VPP_0V [44]

dmesg:
..
pccbb0: <CLPD6832 PCI-CardBus Bridge> mem 0xfe7ec000-0xfe7ecfff irq 9 at
device 23.0 on pci0
cardbus0: <Cardbus bus (newcard)> on pccbb0
pccard0: <16-bit PCCard bus> on pccbb0
pccbb1: <CLPD6832 PCI-CardBus Bridge> mem 0xfe7e8000-0xfe7e8fff irq 9 at
device 23.1 on pci0
cardbus1: <Cardbus bus (newcard)> on pccbb1
pccard1: <16-bit PCCard bus> on pccbb1
..
cardbus0: Detaching card: no cards to detach!
pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
cardbus1: Detaching card: no cards to detach!
pccbb1: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
..
pccbb1: card inserted: event=0x00000000, state=30000821
pccbb1: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
pccbb1: pccbb_power: CARD_VCC_3V and CARD_VPP_VCC [11]
pccbb1: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
pccbb1: card activation failed
cardbus1: Detaching card: no cards to detach!
pccbb1: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message




Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?3B1FFA3B.B7859183>