Date: Wed, 08 Nov 2000 15:57:10 +0000 From: Nick Barnes <Nick.Barnes@pobox.com> To: freebsd-multimedia@freebsd.org, freebsd-hardware@freebsd.org Subject: Intel D815EEA motherboard sound and network Message-ID: <4453.973699030@raven.ravenbrook.com>
next in thread | raw e-mail | index | archive | help
I have a new PC with an Intel D815EEA motherboard. This comes with onboard sound, network, and display. I have a Matrox graphics card so I don't care about the onboard display. The motherboard doc claims that the network is compatible with Intel Pro 100, so I expected it to show up as fxp0; it didn't. Archives of freebsd-hardware suggest this is known and unlikely to be fixed. Oh well. I've put a RealTek NIC in instead. The motherboard doc also claims that the sound is compatible with SoundBlaster PCI 128. I've never used sound under FreeBSD, so I'm a bit of a novice here. Can someone advise me what I need in my kernel config to drive this? I've tried a couple of things (pcm, snd) with no visible effect on the dmesg. Here's a verbose boot with GENERIC. Note also the "Bad PnP BIOS data checksum" message. Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.1-RELEASE #0: Fri Jul 28 14:30:31 GMT 2000 jkh@ref4.freebsd.org:/usr/src/sys/compile/GENERIC Calibrating clock(s) ... TSC clock: 797557265 Hz, i8254 clock: 1193154 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium III/Pentium III Xeon/Celeron (797.58-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM> real memory = 268173312 (261888K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x00426000 - 0x0ffb7fff, 263790592 bytes (64402 pages) avail memory = 256700416 (250684K bytes) bios32: Found BIOS32 Service Directory header at 0xc00fda60 bios32: Entry = 0xfda74 (c00fda74) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xda95 pnpbios: Bad PnP BIOS data checksum Other BIOS signatures found: ACPI: 000ff980 Preloaded elf kernel "kernel.GENERIC" at 0xc040d000. Pentium Pro MTRR support enabled md0: Malloc disk Creating DISK md0 Math emulator present pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=11308086) npx0: <math processor> on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=11308086) pcib0: <Host to PCI bridge> on motherboard found-> vendor=0x8086, dev=0x1130, revid=0x02 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base f8000000, size 26 found-> vendor=0x8086, dev=0x1131, revid=0x02 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=2 secondarybus=2 found-> vendor=0x8086, dev=0x244e, revid=0x01 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=1 secondarybus=1 found-> vendor=0x8086, dev=0x2440, revid=0x01 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x244b, revid=0x01 class=01-01-80, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000ffa0, size 4 found-> vendor=0x8086, dev=0x2442, revid=0x01 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=11 map[20]: type 1, range 32, base 0000ef40, size 5 found-> vendor=0x8086, dev=0x2443, revid=0x01 class=0c-05-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=b, irq=9 map[20]: type 1, range 32, base 0000efa0, size 4 found-> vendor=0x8086, dev=0x2444, revid=0x01 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=c, irq=10 map[20]: type 1, range 32, base 0000ef80, size 5 found-> vendor=0x8086, dev=0x2445, revid=0x01 class=04-01-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=b, irq=9 map[10]: type 1, range 32, base 0000e800, size 8 map[14]: type 1, range 32, base 0000ef00, size 6 pci0: <PCI bus> on pcib0 pcib1: <PCI to PCI bridge (vendor=8086 device=1131)> at device 1.0 on pci0 found-> vendor=0x102b, dev=0x0525, revid=0x04 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base f2000000, size 25 map[14]: type 1, range 32, base feafc000, size 14 map[18]: type 1, range 32, base fe000000, size 23 pci2: <PCI bus> on pcib1 pci2: <Matrox MGA G400 AGP graphics accelerator> (vendor=0x102b, dev=0x0525) at 0.0 irq 11 pcib2: <PCI to PCI bridge (vendor=8086 device=244e)> at device 30.0 on pci0 found-> vendor=0x8086, dev=0x2449, revid=0x01 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base fd9fe000, size 12 map[14]: type 1, range 32, base 0000df00, size 6 found-> vendor=0x10ec, dev=0x8139, revid=0x10 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base 0000d800, size 8 map[14]: type 1, range 32, base fd9ffc00, size 8 pci1: <PCI bus> on pcib2 pci1: <unknown card> (vendor=0x8086, dev=0x2449) at 8.0 irq 11 rl0: <RealTek 8139 10/100BaseTX> port 0xd800-0xd8ff mem 0xfd9ffc00-0xfd9ffcff irq 11 at device 13.0 on pci1 rl0: Ethernet address: 00:50:fc:01:f4:0e miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: rl0 attached isab0: <PCI to ISA bridge (vendor=8086 device=2440)> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Generic PCI ATA controller> port 0xffa0-0xffaf at device 31.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xffa0 ata0: mask=03 status0=50 status1=00 ata0: mask=03 status0=50 status1=00 ata0: devices = 0x1 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xffa8 ata1: mask=03 status0=50 status1=00 ata1: mask=03 status0=10 status1=00 ata1: devices = 0x4 ata1: at 0x170 irq 15 on atapci0 uhci0: <UHCI (generic) USB controller> port 0xef40-0xef5f irq 11 at device 31.2 on pci0 uhci0: (New UHCI DeviceId=0x24428086) using shared irq11. usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: (0x24428086) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub0: port 1 power on failed, IOERROR uhub0: port 2 power on failed, IOERROR pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3 irq 9 uhci1: <UHCI (generic) USB controller> port 0xef80-0xef9f irq 10 at device 31.4 on pci0 uhci1: (New UHCI DeviceId=0x24448086) usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: (0x24448086) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub1: port 1 power on failed, IOERROR uhub1: port 2 power on failed, IOERROR pci0: <unknown card> (vendor=0x8086, dev=0x2445) at 31.5 irq 9 Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 ata-: ata0 exists, using next available unit number ata-: ata1 exists, using next available unit number isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 bt0: Failed Status Reg Test - fe bt_isa_probe: Probe failed at 0x330 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x334 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x230 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x234 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x130 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x134 aha0: status reg test failed fe aha0: status reg test failed ff ated 4 times atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0065 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 00 00 64 psm: status 00 03 64 psm: status 00 03 64 psm: data 08 06 05 psm: data 08 01 00 psm: status 00 02 64 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000000, packet size:4 psm0: syncmask:08, syncbits:08 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) pcic1: not probed (disabled) sio0: irq maps: 0x41 0x51 0x41 0x41 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x41 0x49 0x41 0x41 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: not probed (disabled) sio3: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppi0: <Parallel I/O> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port plip0: <PLIP network interface> on ppbus0 bpf: lp0 attached isa_probe_children: probing PnP devices BIOS Geometries: 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: sl0 attached bpf: ppp0 attached new masks: bio 68cc40, tty 63109a, net 67189a bpf: lo0 attached bpf: gif0 attached bpf: gif1 attached bpf: gif2 attached bpf: gif3 attached bpf: faith0 attached ad0: <IBM-DTLA-307045/TX6OA60A> ATA-5 disk at ata0 as master ad0: 43979MB (90069840 sectors), 89355 cyls, 16 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 32 depth queue, BIOSDMA ad0: piomode=4 dmamode=2 udmamode=4 cblid=1 Creating DISK ad0 Creating DISK wd0 ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1 ata1-master: success setting up PIO4 mode on generic chip acd0: <SAMSUNG CD-ROM SC-152C/CS02> CDROM drive at ata1 as master acd0: read 171KB/s (8937KB/s), 128KB buffer, PIO4 acd0: Reads: CD-R, CD-RW, CD-DA stream, packet acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked Mounting root from ufs:/dev/ad0s1a ad0s1: type 0xa5, start 63, end = 41929649, size 41929587 : OK start_init: trying /sbin/init -- FreeBSD 2.2.8-RELEASE: up 6 days, 5:09 last reboot Thu Nov 2 10:55 (lightning strike) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4453.973699030>