Date: Sun, 5 May 2002 12:10:33 -0400 From: "Steven J. Corso" <steve@netdtw.com> To: <freebsd-mobile@freebsd.org> Subject: PCCARD Modems Message-ID: <000a01c1f44f$63676a00$66faa8c0@NETDTW.COM>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
------=_NextPart_000_0007_01C1F42D.DB6ACDC0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
I am having problems getting any PCCARD modem to work properly with =
FreeBSD (4.6-PRERELEASE or 4.5-stable a few days ago). They all see to =
exhibit the same symptom, they are recognized, and will answer to AT =
commands, but all indicated NO DIALTONE.
At boot time the Toshiba Portege 3010CT indicates the following:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights =
reserved.
FreeBSD 4.6-PRERELEASE #2: Sun May 5 10:06:21 EDT 2002
steve@steve3010.netdtw.com:/usr/src/sys/compile/STEVE3010
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P55C (quarter-micron) (266.62-MHz 586-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x582 Stepping =3D 2
Features=3D0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory =3D 100728832 (98368K bytes)
avail memory =3D 92704768 (90532K bytes)
Preloaded elf kernel "kernel" at 0xc051d000.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
Using $PIR table, 4 entries at 0xc00f9070
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <NeoMagic MagicGraph 128XD SVGA controller> at 4.0 irq 11
ohci0: <NEC uPD 9210 USB controller> mem 0xffaff000-0xffafffff irq 11 at =
device 11.0 on pci0
usb0: OHCI version 1.0
usb0: <NEC uPD 9210 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Toshiba Fast Infra Red controller> port 0xffc0-0xffdf irq 11 at =
device 17.0 on pci0
pci_cfgintr_virgin: using routable interrupt 3
pci_cfgintr: 0:19 INTA routed to irq 3
pcic0: <Toshiba ToPIC97 PCI-CardBus Bridge> irq 3 at device 19.0 on pci0
pcic0: PCI Memory allocated: 0x44000000
pccard0: <PC Card bus (classic)> on pcic0
pci_cfgintr_search: linked (1) to configured irq 3 at 0:19:0
pci_cfgintr: 0:19 INTB routed to irq 3
pcic1: <Toshiba ToPIC97 PCI-CardBus Bridge> irq 3 at device 19.1 on pci0
pcic1: PCI Memory allocated: 0x44001000
pccard1: <PC Card bus (classic)> on pcic1
isa0: <ISA bus> on motherboard
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on =
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
pcm0: <OPL3-SAx (YMF719)> at port =
0x530-0x537,0x370-0x371,0xf8c-0xf94,0xe0e irq 5 drq 1 flags 0xc115 on =
isa0
ad0: 28615MB <IC25N030ATDA04-0> [58140/16/63] at ata0-master BIOSPIO
Mounting root from ufs:/dev/ad0s2a
WARNING: / was not properly dismounted
pccard: card inserted, slot 0
pccard: card inserted, slot 0
ed1 at port 0x300-0x31f irq 3 flags 0x30000 slot 0 on pccard0
ed1: address 00:40:f4:2a:9a:17, type NE2000 (16 bit)=20
$=20
Insertion of the PCCARD modem will result in:
pccard: card inserted, slot 1
sio4 at port 0x2f8-0x2ff irq 3 flags 0x40000 slot 1 on pccard1
sio4: type 16550A
sio4: unable to activate interrupt in fast mode - using normal mode
$=20
I would appreciate some assistance in correcting this problem.
Thank you,
Steve
------=_NextPart_000_0007_01C1F42D.DB6ACDC0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 5.50.4912.300" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>I am having problems getting any PCCARD =
modem to=20
work properly with FreeBSD (4.6-PRERELEASE or 4.5-stable a few days =
ago). They all see to exhibit the same symptom, they are=20
recognized, and will answer to AT commands, but all=20
indicated NO DIALTONE.</FONT></DIV>
<DIV> </DIV>
<DIV> <FONT face=3DArial size=3D2>At boot time the Toshiba Portege =
3010CT=20
indicates the following:</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Copyright (c) 1992-2002 The FreeBSD=20
Project.<BR>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, =
1992, 1993,=20
1994<BR> The Regents of the =
University=20
of California. All rights reserved.<BR>FreeBSD 4.6-PRERELEASE #2: Sun =
May =20
5 10:06:21 EDT 2002<BR> <A=20
href=3D"mailto:steve@steve3010.netdtw.com:/usr/src/sys/compile/STEVE3010"=
>steve@steve3010.netdtw.com:/usr/src/sys/compile/STEVE3010</A><BR>Timecou=
nter=20
"i8254" frequency 1193182 Hz<BR>CPU: Pentium/P55C (quarter-micron) =
(266.62-MHz 586-class CPU)<BR> Origin =3D "GenuineIntel" Id =
=3D=20
0x582 Stepping =3D 2<BR> =20
Features=3D0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX><BR>real =
memory =20
=3D 100728832 (98368K bytes)<BR>avail memory =3D 92704768 (90532K=20
bytes)<BR>Preloaded elf kernel "kernel" at 0xc051d000.<BR>Intel Pentium=20
detected, installing workaround for F00F bug<BR>md0: Malloc =
disk<BR>Using $PIR=20
table, 4 entries at 0xc00f9070<BR>npx0: <math processor> on=20
motherboard<BR>npx0: INT 16 interface<BR>pcib0: <Host to PCI =
bridge> on=20
motherboard<BR>pci0: <PCI bus> on pcib0<BR>pci0: <NeoMagic =
MagicGraph=20
128XD SVGA controller> at 4.0 irq 11<BR>ohci0: <NEC uPD 9210 USB=20
controller> mem 0xffaff000-0xffafffff irq 11 at device 11.0 on =
pci0<BR>usb0:=20
OHCI version 1.0<BR>usb0: <NEC uPD 9210 USB controller> on =
ohci0<BR>usb0:=20
USB revision 1.0<BR>uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, =
addr=20
1<BR>uhub0: 2 ports with 2 removable, self powered<BR>chip1: <Toshiba =
Fast=20
Infra Red controller> port 0xffc0-0xffdf irq 11 at device 17.0 on=20
pci0<BR>pci_cfgintr_virgin: using routable interrupt 3<BR>pci_cfgintr: =
0:19 INTA=20
routed to irq 3<BR>pcic0: <Toshiba ToPIC97 PCI-CardBus Bridge> irq =
3 at=20
device 19.0 on pci0<BR>pcic0: PCI Memory allocated: =
0x44000000<BR>pccard0:=20
<PC Card bus (classic)> on pcic0<BR>pci_cfgintr_search: linked (1) =
to=20
configured irq 3 at 0:19:0<BR>pci_cfgintr: 0:19 INTB routed to irq =
3<BR>pcic1:=20
<Toshiba ToPIC97 PCI-CardBus Bridge> irq 3 at device 19.1 on=20
pci0<BR>pcic1: PCI Memory allocated: 0x44001000<BR>pccard1: <PC Card =
bus=20
(classic)> on pcic1<BR>isa0: <ISA bus> on motherboard<BR>orm0:=20
<Option ROM> at iomem 0xc0000-0xcbfff on isa0<BR>fdc0: <NEC 765 =
or=20
clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0<BR>ata0 at port=20
0x1f0-0x1f7,0x3f6 irq 14 on isa0<BR>ata1 at port 0x170-0x177,0x376 irq =
15 on=20
isa0<BR>atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 =
on=20
isa0<BR>atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0<BR>kbd0 =
at=20
atkbd0<BR>psm0: <PS/2 Mouse> irq 12 on atkbdc0<BR>psm0: model =
Generic PS/2=20
mouse, device ID 0<BR>vga0: <Generic ISA VGA> at port 0x3c0-0x3df =
iomem=20
0xa0000-0xbffff on isa0<BR>sc0: <System console> at flags 0x100 on =
isa0<BR>sc0: VGA <16 virtual consoles, flags=3D0x300><BR>sio0 at =
port=20
0x3f8-0x3ff irq 4 flags 0x10 on isa0<BR>sio0: type 16550A<BR>sio1: =
configured=20
irq 3 not in bitmap of probed irqs 0<BR>ppc0: <Parallel port> at =
port=20
0x378-0x37f irq 7 on isa0<BR>ppc0: Generic chipset (NIBBLE-only) in =
COMPATIBLE=20
mode<BR>ppi0: <Parallel I/O> on ppbus0<BR>plip0: <PLIP network=20
interface> on ppbus0<BR>lpt0: <Printer> on ppbus0<BR>lpt0:=20
Interrupt-driven port<BR>pcm0: <OPL3-SAx (YMF719)> at port=20
0x530-0x537,0x370-0x371,0xf8c-0xf94,0xe0e irq 5 drq 1 flags 0xc115 on=20
isa0<BR>ad0: 28615MB <IC25N030ATDA04-0> [58140/16/63] at =
ata0-master=20
BIOSPIO<BR>Mounting root from ufs:/dev/ad0s2a<BR>WARNING: / was not =
properly=20
dismounted<BR>pccard: card inserted, slot 0<BR>pccard: card inserted, =
slot=20
0<BR>ed1 at port 0x300-0x31f irq 3 flags 0x30000 slot 0 on =
pccard0<BR>ed1:=20
address 00:40:f4:2a:9a:17, type NE2000 (16 bit) <BR>$ </FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Insertion of the PCCARD modem will =
result=20
in:</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>pccard: card inserted, slot 1<BR>sio4 =
at port=20
0x2f8-0x2ff irq 3 flags 0x40000 slot 1 on pccard1<BR>sio4: type =
16550A<BR>sio4:=20
unable to activate interrupt in fast mode - using normal mode<BR>$ =
</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>I would appreciate some assistance in =
correcting=20
this problem.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Thank you,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Steve</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV></BODY></HTML>
------=_NextPart_000_0007_01C1F42D.DB6ACDC0--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000a01c1f44f$63676a00$66faa8c0>