Date: Wed, 8 Jun 2011 12:26:25 -0400 From: John Baldwin <jhb@freebsd.org> To: John <jwd@slowblink.com> Cc: freebsd-current@freebsd.org Subject: Re: NEW_PCIB? pcib1: failed to allocate initial I/O port window: 0x4000-0x4fff Message-ID: <201106081226.25164.jhb@freebsd.org> In-Reply-To: <20110608041305.GA46490@FreeBSD.org> References: <20110606002353.GA2518@slowblink.com> <201106071041.28654.jhb@freebsd.org> <20110608041305.GA46490@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wednesday, June 08, 2011 12:13:05 am John wrote: > ----- John Baldwin's Original Message ----- > > On Monday, June 06, 2011 9:33:30 pm John wrote: > > > ----- John Baldwin's Original Message ----- > > > > On Sunday, June 05, 2011 8:23:53 pm John wrote: > > > > > > > > > > I just attempted to update an HP385G0 system from current as of > > > > > 4-15-2011 to 6-2-2011. The new system will not boot, and shows the > > > > > following message when it hangs: > > > > > > I applied your patch/rebuilt/installed/rebooted. The system seems > > > to get farther, but still locks up tight. A screen pic is here: > > > > > > http://people.freebsd.org/~jwd/dmesg.jpg > > > > > > > Hmmm, an MCA is not a good sign. > > > > Yes, there are multiple ranges. Would it be possible to use a serial port to > > capture a full verbose dmesg up to the point where it hangs? > > > > -- > > John Baldwin > > Hi John > > Yes, I did get a serial console & ilo configured on the system today. > I've attached two verbose consoles. The 1st is from -current as of today > which fails to boot. The 2nd is from earlier this year which boot correctly. Humm, is the first with any patches applied? Earlier you reported a problem that occured much later (failing to allocate the initial window) but in your new dmesg it isn't getting that far. -- John Baldwin
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201106081226.25164.jhb>