Date: Tue, 2 Jan 1996 09:35:43 -0600 (CST) From: ptroot@uswest.com To: freebsd-bugs@freebsd.org Subject: Three problems with FreeBSD 2.1 Message-ID: <9601021535.AA00549@kermit.acs.uswest.com>
next in thread | raw e-mail | index | archive | help
Hi, I just installed FreeBSD 2.1 and am having a few problems: First my configuration: DX2/50 with ISA MB 20 Meg Ram 1 1 gig SCSI 1 100 meg SCSI Cirrus SVGA GD542x Adaptec 1542B Logitec 3-button bus mouse Sound Blaster 16 SMC elite 8013 CTX CVP-5468A 14in SVGA non-interlaced The disks are laid out as follows 1 Gig ----- 1 - 200 Meg for DOS 2 - 800 Meg for FreeBSD / 750 Meg swap 500 Meg I keep everything in one partition to easy backups and optimally use disk space. I've built a custom kernel with only what I need, and everything shows up fine, with no conflicts. Though I'm a little concerned with the port of the SB and the mouse. The SB 16 is set to port 0x220 and the mouse is (unmovable) at 0x23c. 1) When I halt/reboot/shutdown the machine, it tries to sync but after a line full of 1 1 1 1 1 it says giving up. then on reboot it says / was not properly unmounted. Could it be that the partition goes past 1024 cylinders? 2) X won't work. I can only start it as root, though the device is 666. I tried this with both the sco and the vt console. (I built both) There is a 1 inch border on all sides. I don't have enough screen to let that happen. The mouse runs to 0 0 and then won't move from it, the first time you touch the mouse. This is the mse0 driver. Any help is appreciated. Thanks, Paul. -- Paul T. Root E/Mail: ptroot@uswest.com 200 S. 5th St. Suite 1100 PAG: +1 (800) SKY-PAGE PIN: 537-7370 Minneapolis, MN 55402 WRK: +1 (612) 663-1979 NIC: PTR FAX: +1 (612) 663-8030
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9601021535.AA00549>