Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 27 Jan 2004 16:17:27 +0200
From:      Panagiotis Astithas <past@noc.ntua.gr>
To:        Lefteris Chatzibarbas <lefcha@hellug.gr>
Cc:        freebsd-current@freebsd.org
Subject:   Re: System still hangs with "ata1-master: TIMEOUT - SETFEATURES SET TRANSFER MODE"
Message-ID:  <401672F7.8080404@noc.ntua.gr>
In-Reply-To: <20040125111743.GA564@bsd>
References:  <20040125111743.GA564@bsd>

next in thread | previous in thread | raw e-mail | index | archive | help
Lefteris Chatzibarbas wrote:
> Hello,
> 
> Devices are:
> 
>   ad0: <WDC WD800JB-00ETA0/77.07W77> ATA-6 disk at ata0-master
>   acd0: <DV-516E/3.04> DVDROM drive at ata1 as master
>   acd1: <CD-W524E/1.0A> CDRW drive at ata1 as slave
> 
> Verbose boot of a good kernel:
> 
>   http://members.hellug.gr/lefcha/dmesg.out
> 
> System still hangs during boot with the message:
> 
>   ata1-master: TIMEOUT - SETFEATURES SET TRANSFER MODE retrying (0 retries left)
> 
> ... and verbose boot:
> 
>   ata1: reiniting channel ..
>   ata1: reset tp1 mask=03 ostat0=50 ostat1=50
>   ata1-master: stat=0x10 err=0x01 lib=0x14 msb=0xeb
>   ata1-slave: stat=0x10 err=0x01 lib=0x14 msb=0xeb
>   ata1: reset tp2 mask=03 stat0=10 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
>   ata1: resetting done ..
>   ata1-slave: pio=0x0c wdma=0x22 udma=0x42 cable=80pin
>   ata1: reiniting channel ..
>   ata1: reset tp1 mask=03 ostat0=50 ostat1=50
>   ata1-master: stat=0x10 err=0x01 lib=0x14 msb=0xeb
>   ata1-slave: stat=0x10 err=0x01 lib=0x14 msb=0xeb
>   ata1: reset tp2 mask=03 stat0=10 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
>   ata1: resetting done ..
>   ata1-slave: pio=0x0c wdma=0x22 udma=0x42 cable=80pin
> 
> Soren Schmidt's commit 2004/01/19 07:20:00 PST:
> 
>   1.202     +2 -1      src/sys/dev/ata/ata-all.c
>   1.71      +1 -1      src/sys/dev/ata/ata-all.h
>   1.17      +23 -21    src/sys/dev/ata/ata-queue.c
>   1.161     +1 -1      src/sys/dev/ata/atapi-cd.c
> 
> ... or:
> 
>   http://lists.freebsd.org/pipermail/cvs-src/2004-January/016880.html
> 
> ... didn't correct the problem.
> 
> Thanks

"Me too".
Same controller, same hard disk, only one device on the second channel:
acd0: DVDROM <DVD-ROM DDU1621> at ata1-master UDMA33
I used 5.2-RELEASE and the -current snapshot form 24/1. The former 
freezes after the "TIMEOUT" message, the latter just locks up solid. The 
machine runs happily a -current from last October though.

Cheers,
-- 
Panagiotis Astithas
Electrical & Computer Engineer, PhD
Network Management Center
National Technical University of Athens, Greece



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?401672F7.8080404>